File.encoding won't swap

trying to help someone who has a windows file server originally installed for russian locale. they managed to swap it back to what they require (en_GB) but the JVM file encoding's still stuck on cp1251. they say they've changed the JVM config's file encoding ("-Dfile.encoding=cp1252") yet the system still reports cp1251 for the file encoding (even after several reboots). i don't see anything in the bug parade & i'm at a loss as to why this box won't swap it's JVM file encoding.
any ideas?
thanks.

which version of the videoencoder are you using?
2.0.0.494 edition (Brand New)
Remember that you can't crop all files at once . .
Oh, didn't see that in the manual!
Where the heck is it listed?
I tried to save a profile with the compression setting -
including cropping - but upon trying to use that saved profile - a
dialog box comes up with:
Warning: some of the settings (crop, trim, cue point . . . .
Too bad, so sad!
2,000+ movies is gonna take a long time!
Their huge files - broadcast DVC-Pro - and the overscan - and
interlace top & bottom show up . . . . Aaarrrgggg!
Bye the way - is it 4 pixels cropped - top & bottom - to
clean it up ?
And shouldn't a few (maybe 2 pixels) on each side be cropped
as well?
Any other suggestions on how to automate what I need to do
(deinterlace, crop 4 pixels top & bottom & 2 pixels sides -
exported "High Quality / large)
Thanks for responding so far - sure helps clarify things!
Luke

Similar Messages

On multiple file encoding - won't let me crop

Hi everybody -
Just beginning the compression stage of my dance video
project(s).
When adding 70+ videos to the Flash Video Encoder - I am able
to make all the settings I want - except
being able to "Crop" 4 pixels from top, bottom and each side
(deinterlacing still showed top & bottom issues).
It's fields are not active, and won't let me to crop.
Is it something I'm doing wrong, or have I missed a step
along the way?
Thanks for helping if you can!
Kind regards,
Luke Wonderly

which version of the videoencoder are you using?
2.0.0.494 edition (Brand New)
Remember that you can't crop all files at once . .
Oh, didn't see that in the manual!
Where the heck is it listed?
I tried to save a profile with the compression setting -
including cropping - but upon trying to use that saved profile - a
dialog box comes up with:
Warning: some of the settings (crop, trim, cue point . . . .
Too bad, so sad!
2,000+ movies is gonna take a long time!
Their huge files - broadcast DVC-Pro - and the overscan - and
interlace top & bottom show up . . . . Aaarrrgggg!
Bye the way - is it 4 pixels cropped - top & bottom - to
clean it up ?
And shouldn't a few (maybe 2 pixels) on each side be cropped
as well?
Any other suggestions on how to automate what I need to do
(deinterlace, crop 4 pixels top & bottom & 2 pixels sides -
exported "High Quality / large)
Thanks for responding so far - sure helps clarify things!
Luke

Here's a fix for uploaded files that won't play.

Is this you? You've found a lot of files were uploaded, instead of matched. Some of those files might even be on albums where other tracks matched. Sure you want them ALL to match, but meantime, it would be nice if uploaded files would actually play! Sure, you can see their names, track durations, etc. but if you try to play them directly, nothing happens and if you try to play an album through, when it gets to an uploaded track, it stalls or skips past it. You've checked the file type and it's an AAC so you figure it can't be a file encoding incompatibility problem and besides, whatever the file type, Apple is red-flagging anything incompatible, tells you it's ineligible, right?
Guess Again - not all AAC files are produced with the same encoder and some of them, while they'll get past Apple's eligibile/ineligible screening process, probably shouldn't.
I routinely record vinyl using Audacity and at various times I've used different encoders (not that I knew it until now). As a result of checking which uploaded files play and which do not, I'm pretty confident of the following. While some AAC files created outside of iTunes might work, those encoded using Lavf52.36.0 will not. Neither will files encoded using Lavf52.64.2. There may be others.
So what's the fix? The same one recommended for getting files flagged by Apple as ineligible to pass muster. You need to make an AAC copy in iTunes and swap that for the uploaded files that won't play.
Here are the steps I use to get it done. You may be able to streamline the process though.
(1) Turn off wi-fi to prevent iTunes Match from attempting to match any new files until you're good and ready. If you don't to this, you may end up with files you've just created being flagged as duplicates.
(2) Select all files in an album that has some bad uploaded files. Select Advanced > Create AAC Version. (NOTE: I don't bother trying to separate uploaded from matched, just too much hassle.)
(3) Select one of the files, so you can File > Reveal In Finder. Generally this will get you to the album folder that includes both sets of tracks. The ones you just created will have a "1" in the file name.
(4) Create a folder on the desktop and move all the newly created files to it. Delete the "1" from the file names. Name the folder based on album title.
(5) In iTunes, delete the listings for the newly created files.
(6) Turn on wi-fi and wait for iCloud to reconnect. Watch the cloud icon - it'll tell you.
(7) Delete the album from iTunes (You're now getting rid of the copy that was originally uploaded, so be sure you've really got the new AAC files handy to replace them with). Note you will see an option to delete from iCloud too. Check it. You want these files GONE!
(8) Select Store > Update iTunes Match. If you do a search for the album from an iCloud enabled iOS device (I use Apple TV) after the update is completed, you shouldn't be able to find the album.
(9) Select File > Add To Library and go get the folder of tunes you created.
(10) Run Update iTunes Match again.
(11) Watch the iTunes progress bar. Once the matching process has checked to see if you've added anything to your library, you'll see fresh copies of your songs uploading.
(12) As another means of confirmation, once several of the songs have uploaded, do an iOS device search for the album. You should be able to get the album to appear before the upload is complete. You may have to back out of the search and back in to get it to work, but chances are when you first see the album, the song titles will all be grayed out. Once the update is complete, give it a minute and everything should become available to you.
(13) Pick a track that wouldn't play before and watch to see if the timer starts to move, followed by music! It is now time to do a little happy dance.
I know this is a far cry from figuring out what it takes to get songs that should match to actually do so, but that's a whole different ball of wax.

Thanks this was useful. I have been ripping my audiobooks and I was finding that they would get uploaded to iCloud in the process, which in itself was fine, but then iTunes would not let me change the media type to Audiobook, which is annoying as it effects how iTunes treats the media. Like showing you the skip back 10 seconds button.
The general outline here helped me work around the issue and change the media type before the media was re-uploaded to iCloud.
Sean

File encoding issues with Mac OSX?

I really love DreamWeaver and I think its the best editor our there, except for one thing - the file encoding!
I tried setting the default encoding to UTF-8 under Preferences -> New Document, but that won't cut it.
Dreamweaver always creates/saves new files as Western/ISO format, so I always have to open them up with another text editor and overwrite the file with UTF-8 format.
Is there a fix to this or a extension to download?
I'm using CS4 on Mac OSX Leopard.

CS4 should automatically save files as UTF-8. It's the default setting. You shouldn't need to do anything special.
One thing you could try is removing the Prefs file. On a Mac, it's located at <username>:Library:Preferences:Adobe Dreamweaver CS4 Prefs.

Created help file either won't open or opens blank when emailed or copied for another user to see it.

Created help file either won't open or opens blank when emailed or copied for another user to see it.
Our HR person made a help file she wants to email to someone or copy to a network share.
-If she emails it the other person cannot open it.
-If she copies it even from her desktop where she saved it to the folder with all the other files, it opens blank.
Any help would be appreciated.

I think they must be swapping out .html for .chm in DW or something. What the OP describes sure sounds like what happens when you do that.
@dfiore27101
DW doesn't support .chm file types. Adding the extension doesn't compress the images into the file to create a true .chm.
Adding .chm will make a perfectly good .html file stop displaying in DW though.
An easier way to send someone .html help files would be to archive their folder as a .zip then email the .zip. The recipient would then need to extract the archive to view the files in their browser.
I don't know of any way to create real .chm files in DW.

Encore and Encoder won't work.

Hello: My frustrations just keep mounting. My system is a windows platform, XP pro until windows 7 is released, so running at 32, core 2 quad.
I tried to launch Encore today and it kicked me out with an error. I tried to launch it independently of premeire and same thing. So I did a reinstall of Encore, Bridge and Encoder. Still same problem. Encoder won't work. It tried Media Encoder and it worked for one mpg and then on the second one (13 minute video) it choked up. After that both won't work. How am I suppose to export and author?
Does any one have any solutions? My project is huge. Could file size be an issue, if so, any management tips?
Thanks, Christine

You should post this in the Encore forum.

The new updated version of iMovie 10 won't let me open my previous files I created before the update today. I have a wedding that I'm trying to finish and deliver and now I can't because that file version won't open. I keep getting an error message

Hello,
Please help me figure this out. I'm very unhappy at the moment. I'm fustrated and don't have any idea how to revert to the original version before the update was done on iMovie 10. I NEVER hated APPLE until NOW!! I love APPLE products and apps so please help me stay in that mindset. So I worked on some movie projects when I got my macbook pro 6 months ago. I update reguarly. I saw the update prompt and honestly, I did not think I would have ANY issuess with opening my previous files that I created only a few months ago with this updated version.The new updated version of iMovie 10 won't let me open my previous files I created before the update today. I have a wedding that I'm trying to finish and deliver and now I can't because that file version won't open. I keep getting an error message and the iMovie app closes. Last night I saw the file and tried to open it but no luck. Error message came up again. I reboot and turned off my laptop for the evening and tried again just now but nothing!! I need that video. My job depends on it! I worked so hard on this wedding video and now it's lost and won't open. I work another job and don't have much time. I really don't want to start all over again. Please help me. Thanks so much for your assistance.
Fustrated APPLE customer
Jolly A. Rupp

I also have Jolly's problem. I found the iMovie 9.0.9 folder and tried to launch the older version of iMove. It would not launch. I removed all of the iMovie preferences from the Preferences folder, removed iMove 10 from the applications folder, and restarted my Mac. iMove 9.0.9 still won't launch and I can't access my videos created with the older version of iMovie. Is there a way to uninstall iMovie 10 and reinstall iMovie 9.0.9?
I am running Yosemitie on a iMac.
Paul

File encoding cp1252 problem

Hi there,
I have a problem concerning the file encoding in a web application.
I'll sketch the problem for you.
I'm working on adjustments and bug fixes of an e-mail archive at the company i work for. With this archive, users can search e-mails using a Struts 1.0 / JSP web application, read them, and send them back to their mail inbox.
Recently a bug has appeared, concerning character sets.
We have mails with french characters or other uncommon characters in it.
Like the following mail:
Subject: Test E-mail archief co�rdinatie Els
Content: Test co�rdinatie r�d�marrage ... test weird characters � � �
In the web application itself, everything is fine...but when i send this mail back to my inbox, the subject gets all messed up:
=?ANSI_X3.4-1968?Q?EMAILARCHIVE_*20060419007419*_Tes?=
=?ANSI_X3.4-1968?Q?t_E-maill_archief_co=3Frdinatie_Els?=
The content appears to be fine.
We discovered this problem recently, and a lot of effort and searching has been done to solve it.
Our solution was to put the following line in catalina.sh , with what our Tomcat 4.1 webserver starts.
CATALINA_OPTS="-server -Dfile.encoding=cp1252"
On my Local Win2K computer, the encoding didn't pose a problem, so catalina.sh wasn't changed. It was only a problem (during testing) on our Linux test server ... a VMWare server which is a copy of our production environment.
On the VMWare, i added the line to the catalina.sh file. And it worked fine.
Problem Solved !
Yesterday, we were putting the archive in production. On our production server ... BANG --> NullPointerException.
We thought it has something to do with jars he couldn't find, older jars, cache of tomcat ... but none of this solved the problem.
We put the old version back into production, but the same NullPointerException occured.
We then put the "CATALINA_OPTS="-server -Dfile.encoding=cp1252" " line in comment ... and then it worked again.
We put the new version into production (without the file encoding line), and it worked perfectly, except for those weird ANSI characters.
Anyone have any experience with this?
I use that same file encoding to start a batch, but there i call it Cp1252 (with a capital C) ... might that be the problem? But i have to be sure...because the problem doesn't occur in the test environment, and i can't just test in production ... and switch off the server whenever i'd like to.
Does anyone see if making cp1252 --> Cp1252 might be a solution, or does anyone have another solution?
Thanks in advance.

First, I will start by saying that JInitiator was not intended to run on Win7, especially 64bit. So, it may be time to think about moving to the Java Plugin. Preferably one which is certified with your Forms version.
To your issue, I suspect you need to change the "Region and Language" settings on the client machine. This can be found on the Control Panel. If that doesn't help, take a look at this:
http://stackoverflow.com/questions/4850557/convert-string-from-codepage-1252-to-1250

So whenever I try to download the newest itunes file it won't let me finish the install process because I'm missing the "Itunes.msi" file whatever that is and I've done some searches but I cannot find the file. Anyone know what to do?

So whenever I try to download the newest itunes file it won't let me finish the install process because I'm missing the "Itunes.msi" file whatever that is and I've done some searches but I cannot find the file. Anyone know what to do?

you can try this thread maybe? https://discussions.apple.com/message/16217061#16217061

How to set File Encoding to UTF-8 On Save action in JDeveloper 11G R2?

Hello,
I am facing issue when I am modifying a File using JDeveloper 11G R2. JDeveloper is changing the Encoding of the File to System default Encoding (ANSI) instead of UTF-8. I have updated the Encoding to UTF-8 in "Tools | Preferences | Environment | Encoding" option and restarted the JDeveloper. I have also updated "Project Properties | Compiler | Character Encoding" option to UTF-8. None of them are working.
I am using below version of JDeveloper,
Oracle JDeveloper 11g Release 2 11.1.2.3.0
Studio Edition Version 11.1.2.3.0
Product Version: 11.1.2.3.39.62.76.1
I created a file in UTF-8 Encoding. I opened it, do some changes and Save it.
When I open the "Properties" tab using "Help | About" Menu, I can see that the Properties of JDeveloper are showing encoding as Cp1252. Is it related?
Properties
sun.jnu.encoding
Cp1252
file.encoding
Cp1252
Any idea how to make sure JDeveloper saves the File in UTF-8 always?
- Sujay

I have already done that. That is the first thing I did as mentioned in my Thread. I have also added below 2 options in jdev.conf and restarted JDeveloper, but that also did not work.
AddVMOption -Dfile.encoding=UTF-8
AddVMOption -Dsun.jnu.encoding=UTF-8
- Sujay

Jinitiator 1.3.1.2.6 on win 7 64 and win xp (different file.encoding)

Hello,
our customer has moved from windows XP to Windows 7 and he uses Jinitiator 1.3.1.2.6...
In some "Forms" I have implemented a PJC to save datas from clob to local file system..
But there is a problem....
If I run the same application with Windows XP I get file.encoding=Cp1250 which is ok....
If I run the same application with Windows 7 (64) I get file.encoding=CP1252 and here is the problem...
Is there any way to run Jinitiator (or set up file.encoding to/with) Cp1250?
Maybe is this a local problem with windows?
thank you..

First, I will start by saying that JInitiator was not intended to run on Win7, especially 64bit. So, it may be time to think about moving to the Java Plugin. Preferably one which is certified with your Forms version.
To your issue, I suspect you need to change the "Region and Language" settings on the client machine. This can be found on the Control Panel. If that doesn't help, take a look at this:
http://stackoverflow.com/questions/4850557/convert-string-from-codepage-1252-to-1250

How to set the file.encoding in jvm?

I have some error in showing Chinese by used servlet,
some one tole me that I can change the file.encoding in jvm to zh_CN, how can I do that?

Add the java argument in your servlet engine.
e.g
java -Dfile.encoding=ISO8859-1
garycafe

Flash won't import mp4 from Camtasia, demands an FLV; Media encoder won't convert to FLV; H264 isn't accepted either.

Flash won't accept the basic mp4 output from Camtasia, it tells me to use Media Encoder to convert it to FLV.
Media Encoder won't convert to F4V or FLV.
I used Media Encoder to convert to H264, but Flash will still not import it.
Could somebody please tell me the best export / convert / import options for getting Camtasia video into Flash (as an embedded video - can't do streaming).
Any tips much appreciated.
Flash Pro CC 2014 and Camtasia Studio 8.4.4.
cheers
-E

Get Media Encoder CS6, which supports conversion to f4v/flv:
Adobe - Adobe Media Encoder : For Windows

Premiere Pro CC and Media Encoder won't start

Hey everyone,
I have a huge problem: My Adobe Premiere CC won't start. I've tried all the solutions I've found in the internet, but nothing seems to work for me
I am using OS X 10.9.3.
Here is a part of my report:
Process:         Adobe Premiere Pro CC 2014 [1153]
Path:            /Applications/Adobe Premiere Pro CC 2014/Adobe Premiere Pro CC 2014.app/Contents/MacOS/Adobe Premiere Pro CC 2014
Identifier:      com.adobe.AdobePremierePro
Version:         8.1.0 (8.1.0)
Code Type:       X86-64 (Native)
Parent Process: launchd [235]
Responsible:     Adobe Premiere Pro CC 2014 [1153]
User ID:         501
Date/Time:       2014-12-10 23:51:37.341 +0100
OS Version:      Mac OS X 10.9.3 (13D65)
Report Version: 11
Anonymous UUID: 5BE9B722-1F73-691F-5EEF-9775088356E8
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Exception Type: EXC_BAD_ACCESS (SIGSEGV)
Exception Codes: KERN_INVALID_ADDRESS at 0x0000000000001650
VM Regions Near 0x1650:
-->
    __TEXT                 0000000100000000-0000000100003000 [   12K] r-x/rwx SM=COW /Applications/Adobe Premiere Pro CC 2014/Adobe Premiere Pro CC 2014.app/Contents/MacOS/Adobe Premiere Pro CC 2014
Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
0   libsystem_platform.dylib       0x00007fff9195abe6 OSAtomicAdd32Barrier$VARIANT$mp + 2
1   libclh.dylib                   0x00007fff9076859f 0x7fff90765000 + 13727
2   libclh.dylib                   0x00007fff90875305 clhCtxCreate + 101
3   libGPUSupportMercury.dylib     0x00007fff94e2daab gldCreateQueue + 651
4   com.apple.opencl               0x00007fff8f68e8ad 0x7fff8f688000 + 26797
5   com.apple.opencl               0x00007fff8f68d32b 0x7fff8f688000 + 21291
6   com.apple.opencl               0x00007fff8f68d211 0x7fff8f688000 + 21009
7   com.apple.opencl               0x00007fff8f6a9fbe clCreateCommandQueue + 150
8   com.adobe.GPUFoundation.framework 0x0000000109afbeb1 GF::CreateOpenCLCommandQueue(_cl_device_id*, _cl_context*, bool) + 65
9   com.adobe.GPUFoundation.framework 0x0000000109ad521f GF::Device::InitializeContextImpl() + 2479
10 com.adobe.GPUFoundation.framework 0x0000000109ad76ae GF::Device::InitializeContext(bool, void*, void*) + 622
11 com.adobe.GPUFoundation.framework 0x0000000109af141a GF::Initialize(bool, bool, bool, void*, void*) + 2154
12 com.adobe.DisplaySurface.framework 0x0000000111bb7f84 DS::Initialize() + 228
13 com.adobe.Mezzanine.framework 0x000000010636c3cd MZ::(anonymous namespace)::FullInitializer::FullInitializer(std::basic_string<unsigned short, std::char_traits<unsigned short>, dvacore::utility::SmallBlockAllocator::STLAllocator<unsigned short> > const&, bool, bool, bool) + 6173
14 com.adobe.Mezzanine.framework 0x0000000106369874 MZ::Initializer::Initializer(std::basic_string<unsigned short, std::char_traits<unsigned short>, dvacore::utility::SmallBlockAllocator::STLAllocator<unsigned short> > const&, bool, bool, bool) + 84
15 com.adobe.Frontend.framework   0x00000001000abe97 FE::Initializer::PrivateImpl::PrivateImpl(ASL::ObjectPtr<ASL::Module, ASL::AtomicValue> const&, std::basic_string<unsigned short, std::char_traits<unsigned short>, dvacore::utility::SmallBlockAllocator::STLAllocator<unsigned short> > const&) + 1479
16 com.adobe.Frontend.framework   0x00000001000aadc8 FE::Initializer::Initializer(ASL::ObjectPtr<ASL::Module, ASL::AtomicValue> const&, std::basic_string<unsigned short, std::char_traits<unsigned short>, dvacore::utility::SmallBlockAllocator::STLAllocator<unsigned short> > const&) + 40
17 com.adobe.Frontend.framework   0x00000001000cdc32 FE::AppMain(ASL::ObjectPtr<ASL::Module, ASL::AtomicValue> const&, std::basic_string<unsigned short, std::char_traits<unsigned short>, dvacore::utility::SmallBlockAllocator::STLAllocator<unsigned short> > const&, int, void*) + 226
18 com.adobe.Frontend.framework   0x00000001000d4ea5 FE::Run(ASL::ObjectPtr<ASL::Module, ASL::AtomicValue> const&, std::basic_string<unsigned short, std::char_traits<unsigned short>, dvacore::utility::SmallBlockAllocator::STLAllocator<unsigned short> > const&, int) + 581
19 com.adobe.AdobePremierePro     0x00000001000018ac main + 508
20 com.adobe.AdobePremierePro     0x00000001000016a4 start + 52

AND Media Encoder won't start as well!!
Process:         Adobe Media Encoder CC 2014 [1284]
Path:            /Applications/Adobe Media Encoder CC 2014/Adobe Media Encoder CC 2014.app/Contents/MacOS/Adobe Media Encoder CC 2014
Identifier:      com.adobe.ame.application
Version:         8.1.0.122 (8.1.0)
Code Type:       X86-64 (Native)
Parent Process: launchd [235]
Responsible:     Adobe Media Encoder CC 2014 [1284]
User ID:         501
Date/Time:       2014-12-10 23:59:55.226 +0100
OS Version:      Mac OS X 10.9.3 (13D65)
Report Version: 11
Anonymous UUID: 5BE9B722-1F73-691F-5EEF-9775088356E8
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Exception Type: EXC_BAD_ACCESS (SIGSEGV)
Exception Codes: KERN_INVALID_ADDRESS at 0x0000000000001650
VM Regions Near 0x1650:
-->
    __TEXT                 0000000100000000-0000000100088000 [ 544K] r-x/rwx SM=COW /Applications/Adobe Media Encoder CC 2014/Adobe Media Encoder CC 2014.app/Contents/MacOS/Adobe Media Encoder CC 2014
Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
0   libsystem_kernel.dylib         0x00007fff93a9a292 __kill + 10
1   com.adobe.dvacore.framework   0x00000001003a28ea (anonymous namespace)::SignalHandler(int, __siginfo*, void*) + 410
2   libsystem_platform.dylib       0x00007fff9195b5aa _sigtramp + 26
3   libsystem_platform.dylib       0x00007fff9195abe6 OSAtomicAdd32Barrier$VARIANT$mp + 2
4   libclh.dylib                   0x00007fff9076859f 0x7fff90765000 + 13727
5   libclh.dylib                   0x00007fff90875305 clhCtxCreate + 101
6   libGPUSupportMercury.dylib     0x00007fff94e2daab gldCreateQueue + 651
7   com.apple.opencl               0x00007fff8f68e8ad 0x7fff8f688000 + 26797
8   com.apple.opencl               0x00007fff8f68d32b 0x7fff8f688000 + 21291
9   com.apple.opencl               0x00007fff8f68d211 0x7fff8f688000 + 21009
10 com.apple.opencl               0x00007fff8f6a9fbe clCreateCommandQueue + 150
11 com.adobe.GPUFoundation.framework 0x0000000109ef7b01 GF::CreateOpenCLCommandQueue(_cl_device_id*, _cl_context*, bool) + 65
12 com.adobe.GPUFoundation.framework 0x0000000109ed0e6f GF::Device::InitializeContextImpl() + 2479
13 com.adobe.GPUFoundation.framework 0x0000000109ed32fe GF::Device::InitializeContext(bool, void*, void*) + 622
14 com.adobe.GPUFoundation.framework 0x0000000109eed06a GF::Initialize(bool, bool, bool, void*, void*) + 2154
15 com.adobe.DisplaySurface.framework 0x0000000107845f74 DS::Initialize() + 228
16 com.adobe.ame.application     0x00000001000376e7 AME::app::MCInitializer::MCInitializer() + 12039
17 com.adobe.ame.application     0x000000010002323a AME::app::AMEAppInitializer::AMEAppInitializer(exo::app::AppInitArgs&, std::basic_string<unsigned short, std::char_traits<unsigned short>, dvacore::utility::SmallBlockAllocator::STLAllocator<unsigned short> >&) + 250
18 com.adobe.ame.application     0x000000010000d2ba AME::app::AMEApp::InitApplication(exo::app::AppInitArgs&) + 1802
19 com.adobe.exo.framework       0x00000001057d2bd5 exo::app::AppBase::Initialize(exo::app::AppInitArgs&) + 1141
20 com.adobe.ame.application     0x00000001000167e6 AME::RunTheApp(exo::app::AppInitArgs&, std::vector<std::basic_string<unsigned short, std::char_traits<unsigned short>, dvacore::utility::SmallBlockAllocator::STLAllocator<unsigned short> >, std::allocator<std::basic_string<unsigned short, std::char_traits<unsigned short>, dvacore::utility::SmallBlockAllocator::STLAllocator<unsigned short> > > >&) + 3270
21 com.adobe.ame.application     0x0000000100047828 main + 440
22 com.adobe.ame.application     0x00000001000032f4 start + 52

File encoding in sender file comunication channel

hello everyboy,
i have a strange situation.
2 PI 7.0 installation: develop and production. Identical. Same SP level, java vm, etc etc
I have a interface file to idoc.
File sender comunication channel are FTP and with content conversion.
They are identical!!!!!!
but....
in production i added parameter File Encoding = ISO-8859-1 because if i have presence of strange characters....it work better.
the same files...in develop installation, they work without this parameter.
why?
there are a place maybe in Config Tool or j2ee admin tool where is set this parameter?
thanks in advance
Edited by: apederiva on Mar 12, 2010 3:55 PM

Hi,
Make sure your both the systems are unicode so that you will not have any issues. Also please see this document for how to work with character encodings in PI. Also we dont have any special config in j2ee admin tool.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/502991a2-45d9-2910-d99f-8aba5d79fb42?quicklink=index&overridelayout=true
Regards,
---Satish

File.encoding won't swap

Similar Messages

Maybe you are looking for