File Error!! It's Killing Me!

I exported over 200 stills from iPhoto. I dumped those stills into a sequence in FCP 5.0.4. I rendered the sequence, but at the end of the rendering, I receive the following message:
File Error: the specified file is open and in use by this or another application.
I closed all applications except for FCP.
Help

This used to happen to me every now and then, but when I just re-rendered it worked fine. I seem to remember that it was an issue with SpotLight.
I know have Spotlight liminted to my system drive, and to leave alone all my scratch disks.
Can you cut your sequence in 1/2 and get either 1/2 to render? Into 1/4's?
Bob

Similar Messages

Split File Error !!

Dear Experts,
Newly I installed SAP BPC 5.1 with SQL 2005.
I am trying to create new Dimension & Process dimension Its showing "Split File Error".
And Whilw clicking on "Save to Server" for dimension Its showing error message "Split File Error".
Please help me,
Thanks in advance

If you go into the spread sheet where the members are defined for that dimension
Goto the bottom of the data and highlight all the empty cells to the bottom of the spreadsheet and then find "clear all" in excel (not easy in 2007!)
I've found this usually fixes this but you may have to do it a few times as BPC holds onto excel processes. Might be worth killing all excel processes from task manager each time you do it as well

Kernel[0]: (default pager): [KERNEL]: Swap File Error.

Hello,
I am hoping that I can get some help in understanding what might have gone wrong here to create the mass hanging of many apps as depicted in the attached image below.
This is what I pulled from the logs:
Sep 11 08:47:10 steve kernel[0]: (default pager): [KERNEL]: ps_select_segment - send HI_WAT_ALERT
Sep 11 08:47:10 steve kernel[0]: low swap: suspending pid 622 (Adobe Photoshop )
Sep 11 08:47:10 steve kernel[0]: (default pager): [KERNEL]: Swap File Error.
Sep 11 08:47:14 steve com.apple.launchd[1] (com.apple.sleepservicesd[12240]): Exited: Killed: 9
Sep 11 08:47:14 steve kernel[0]: memorystatus_thread: idle exiting pid 12240 [SleepServicesD]
Sep 11 08:47:14 steve com.apple.launchd[1] (com.apple.xpcd.0A040000-0000-0000-0000-000000000000[12237]): Exited: Killed: 9
Sep 11 08:47:14 steve kernel[0]: memorystatus_thread: idle exiting pid 12237 [xpcd]
Sep 11 08:47:16 steve kernel[0]: (default pager): [KERNEL]: ps_select_segment - send HI_WAT_ALERT
Sep 11 08:47:16 steve kernel[0]: (default pager): [KERNEL]: Swap File Error.
Sep 11 08:47:16 steve kernel[0]: (default pager): [KERNEL]: ps_select_segment - send HI_WAT_ALERT
Sep 11 08:47:16 --- last message repeated 2 times ---
Sep 11 08:47:16 steve kernel[0]: (default pager): [KERNEL]: Switching ON Emergency paging segment
Sep 11 08:47:18 steve kernel[0]: Sandbox: sandboxd(12246) deny mach-lookup com.apple.coresymbolicationd
Sep 11 08:47:19 steve.local sandboxd[12246] ([12245]): fontworker(12245) deny file-read-data /Volumes/Users/Users/steve/Library/Preferences/ByHost/.GlobalPreferences.7FC032 09-A3F5-5B8F-ADA4-A2EA48544DC8.plist
Sep 11 08:47:19 steve.local sandboxd[12246] ([12245]): fontworker(12245) deny file-read-data /Volumes/Users/Users/steve/Library/Preferences/.GlobalPreferences.plist
Sep 11 08:47:19 steve.local sandboxd[12246] ([12245]): fontworker(12245) deny file-read-data /Volumes/Users/Users/steve/.CFUserTextEncoding
Sep 11 08:48:07 steve com.apple.launchd[1] (com.apple.sleepservicesd[12243]): Exited: Killed: 9
Sep 11 08:48:07 steve kernel[0]: memorystatus_thread: idle exiting pid 12243 [SleepServicesD]
Sep 11 08:48:08 steve kernel[0]: ]: ps_allocate_cluster - send HI_WAT_ALERT
Sep 11 08:48:08 steve kernel[0]: (default pager): [KERNEL]: ps_allocate_cluster - send HI_WAT_ALERT
Sep 11 08:48:09 --- last message repeated 403 times ---
Sep 11 08:48:09 steve kernel[0]: nd HI_WAT_ALERT
Sep 11 08:48:09 steve kernel[0]: (default pager): [KERNEL]: ps_allocate_cluster - send HI_WAT_ALERT
Sep 11 08:48:39 --- last message repeated 171 times ---
Sep 11 08:49:04 steve.local fseventsd[36]: SLOWDOWN: client 0x7fd92b015e00 (pid 622) sleeping due to too many errors (num usleeps 21)
Sep 11 08:49:17 steve kernel[0]: Sandbox: sandboxd(12256) deny mach-lookup com.apple.coresymbolicationd
Sep 11 08:49:18 steve.local sandboxd[12256] ([12255]): fontworker(12255) deny file-read-data /Volumes/Users/Users/steve/Library/Preferences/ByHost/.GlobalPreferences.7FC032 09-A3F5-5B8F-ADA4-A2EA48544DC8.plist
Sep 11 08:49:18 steve.local sandboxd[12256] ([12255]): fontworker(12255) deny file-read-data /Volumes/Users/Users/steve/Library/Preferences/.GlobalPreferences.plist
Sep 11 08:49:18 steve.local sandboxd[12256] ([12255]): fontworker(12255) deny file-read-data /Volumes/Users/Users/steve/.CFUserTextEncoding
Sep 11 08:49:28 steve com.apple.launchd.peruser.89[451] (com.apple.cfprefsd.xpc.agent[12253]): Exited: Killed: 9
Sep 11 08:49:28 steve kernel[0]: memorystatus_thread: idle exiting pid 12253 [cfprefsd]
Sep 11 08:49:28 steve kernel[0]: (default pager): [KERNEL]: System is out of paging space.
Sep 11 08:49:28 steve kernel[0]: (default pager): [KERNEL]: ps_allocate_cluster - send HI_WAT_ALERT
Sep 11 08:49:28 steve kernel[0]: low swap: suspending pid 7864 (Microsoft PowerP)
Sep 11 08:49:28 steve kernel[0]: low swap: suspending pid 658 (Google Chrome)
Sep 11 08:49:28 steve kernel[0]: (default pager): [KERNEL]: Swap File Error.
Sep 11 08:49:28 steve kernel[0]: (default pager): [KERNEL]: ps_allocate_cluster - send HI_WAT_ALERT
Sep 11 08:49:29 --- last message repeated 8 times ---
Sep 11 08:49:29 steve kernel[0]: te_cluster - send HI_WAT_ALERT
Sep 11 08:49:29 steve kernel[0]: (default pager): [KERNEL]: ps_allocate_cluster - send HI_WAT_ALERT
Sep 11 08:49:34 --- last message repeated 224 times ---
Sep 11 08:49:34 steve.local QuickLookUIHelper[12258]: [QL] QuickLookUIHelper is stuck - force quit now
Sep 11 08:50:02 steve.local fseventsd[36]: SLOWDOWN: client 0x7fd92e809400 (pid 593) sleeping due to too many errors (num usleeps 42)
Sep 11 08:50:02 steve.local fseventsd[36]: SLOWDOWN: client 0x7fd92e805400 (pid 1988) sleeping due to too many errors (num usleeps 42)
Sep 11 08:51:07 steve.local fseventsd[36]: SLOWDOWN: client 0x7fd92b015e00 (pid 622) sleeping due to too many errors (num usleeps 75)
Other notes that might help yuo help me.
Machine is an iMac with 16gig of RAM.
There are two partitions on the drive... one for the OS and one for users.
The OS has an 80gig Partition with 50% free space.
The User partition is much more with about 75% free space.
In the past I have noticed Photoshop to be using over 8gig of RAM so maybe it is photoshop.
Thanks
Morgs

There is excessive swapping of data between physical memory and virtual memory. That can happen for two reasons:
You have a long-running process with a memory leak (i.e., a bug), or
You don't have enough memory installed for your usage pattern.
Tracking down a memory leak can be difficult, and it may come down to a process of elimination.
When you notice the swap activity, open the Activity Monitor application and select All Processes from the menu in the toolbar, if not already selected. Click the heading of the Real Mem column in the process table twice to sort the table with the highest value at the top. If you don't see that column, select
View ▹ Columns ▹ Real Memory
from the menu bar.
If one process (excluding "kernel_task") is using much more memory than all the others, that could be an indication of a leak. A better indication would be a process that continually grabs more and more real memory over time without ever releasing it. Here is an example of how it's done.
The process named "Safari Web Content" renders web pages for Safari and other applications. It uses a lot of memory and may leak if certain Safari extensions or third-party web plugins are installed. Consider it a prime suspect.
If you don't have an obvious memory leak, your options are to install more memory (if possible) or to run fewer programs simultaneously.
The next suggestion is only for users familiar with the shell. For a more precise, but potentially misleading, test, run the following command:
sudo leaks -nocontext -nostacks process | grep total
where process is the name of a process you suspect of leaking memory. Almost every process will leak some memory; the question is how much, and especially how much the leak increases with time. I can’t be more specific. See the leaks(1) man page and the Apple developer documentation for details.

SOLUTION: Dealing with the 'end of file' error

Adobe have not only failed to fix the constant 'end of file' error after 6 versions but also, even worse, failed to make the error in any way useful. If you get this error when building a complex project, you have to completely rebuild your project to find the cause. This is a huge issue when dealing with projects like the one I'm currently doing: 7 different discs (projects), each with about 20 timelines.
A simple 'end of file: NAME OF FILE' in the error message would solve this.
However, luckily (as I would have otherwise killed myself by now), I have found a much quicker way of finding problematic files. This is the Windows solution, but hopefully there's an equivelant Mac way of doing it.
Get Process Monitor from here.
Run it, and hit the Filter button on the toolbar.
Add filters for:
Process Name is Adobe Encore.exe
Operation is ReadFile
Go start your build process
When the 'end of file' message appears, switch over to Process Monitor and scroll down to the bottom
Scroll up until you see the last time a file of yours was accessed
There's your culprit
The actual problem with the file usually seems related to Encore not dealing with externally created files very well. Import a non-DVD/blu-ray ready copy of your video and transcode it internally, that seems to fix it.
Adobe needs to stop work on every new feature or bugfix for Encore, and fix the error messages. Bugs are inevitable, but not having adequate error messages or logging so the bugs can be worked around is unforgiveable. It's a simple matter and should be fixed immediately.

Here is where you tell Adobe about bugs, and also where you ask for new features
https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

" Can not interpret the data in file " error while uploading the data in DB

Dear All ,
After running the below report I am getting the " Can not interpret the data in file " error.
Need to upload the data in DB through excel or .txt file.
Kindly advise to resolve the issue.
REPORT ZTEST_4.
data : it like ZPRINT_LOC occurs 0 with header line,
FILETABLE type table of FILE_TABLE,
wa_filetable like line of filetable,
wa_filename type string,
rc type i.
CALL METHOD CL_GUI_FRONTEND_SERVICES=>FILE_OPEN_DIALOG
CHANGING
FILE_TABLE = filetable
RC = rc.
IF SY-SUBRC = 0.
read table filetable into wa_filetable index 1.
move wa_filetable-FILENAME to wa_filename.
Else.
Write: / 'HI'.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
start-of-selection.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME = wa_filename
FILETYPE = 'ASC'
HAS_FIELD_SEPARATOR = 'X'
TABLES
DATA_TAB = it.
IF SY-SUBRC = 0.
Write: / 'HI'.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
insert ZPRINT_LOC from table it.
if sy-subrc = 0.
commit work.
else.
rollback work.
endif.
Regards
Machindra Patade
Edited by: Machindra Patade on Apr 9, 2010 1:34 PM

Dear dedeepya reddy,
Not able to upload the excel but have sucess to upload the .csv file to db through the below code. Thanks for your advise.
REPORT ZTEST_3.
         internal table declaration
DATA: itab TYPE STANDARD TABLE OF ZPRINT_LOC,
      wa LIKE LINE OF itab,
      wa1 like line of itab.
                   variable declaration
DATA: v_excel_string(2000) TYPE c,
       v_file LIKE v_excel_string VALUE    'C:\Documents and Settings\devadm\Desktop\test.csv', " name of the file
        delimiter TYPE c VALUE ' '.         " delimiter with default value space
     read the file from the application server
OPEN DATASET v_file FOR INPUT IN TEXT MODE ENCODING DEFAULT.
IF sy-subrc NE 0.
write:/ 'error opening file'.
ELSE.
    WHILE ( sy-subrc EQ 0 ).
      READ DATASET v_file INTO wa.
      IF NOT wa IS INITIAL.
        append wa TO itab.
      ENDIF.
      CLEAR wa.
    ENDWHILE.
ENDIF.
CLOSE DATASET v_file.
EXEC SQL.
     TRUNCATE TABLE "ZPRINT_LOC"
ENDEXEC.
*------display the data from the internal table
LOOP AT itab into wa1.
WRITE:/ wa1-mandt,wa1-zloc_code,wa1-zloc_desc,wa1-zloc,wa1-zstate.
ENDLOOP.
insert ZPRINT_LOC from table itab.

Logical end of file error

I am getting a "logical end of file error =39" message when trying to export audio to SDII for making a time stamped (BWF) . Any ideas?

How long is the wedding video?
My standard list of things to do first...
Run MacJanitor (free download) to do all the Unix Cron Maintenance scripts.
Run Disk Utility (Applications -> Utilities) and repair disk permissions on your start up drive (typically your internal drive). Also verify any other drives mounted on the system.
Run Preferential Treatment (free download) to check for corrupt/damaged application and system preference files.
Run Cache Out X (free download) to clear all system and application caches.
Reboot your Mac.
If you still can not get it to run correctly, next thing to try is to throw out the iDVD preference file (don't forget to change back those preferences you want different from the defaults next time you run it). If it still doesn't work, then I would suggest you reinstall iDVD.
Patrick

Crystal Server 2013: How to troubleshoot "Can not create temp file---- Error code:-2147215357"

We have a Java7 web app, which generate PDF report by calling Crystal Server 2013 SP4.
The app is being deployed on many different servers. We sometimes got the error below when generating report:
com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: Can not create temp file---- Error code:-2147215357 [CRSDK00000615] Error code name:internal
at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.controllerExportInternal(PrintOutputController.java:280)
at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.export(PrintOutputController.java:152)
at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.export(PrintOutputController.java:130)
at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.export(PrintOutputController.java:113)
Problem is, this seems to be a pretty generic exception. It could be caused by many different reasons.
e.g. network connection problem, wrong DB login, wrong folder path, lack of folder access right, etc.
Each time we could only guess what's wrong.
We are running into it again, and this time everything seems correctly configured so far.
We wonder if there are more info we can get to troubleshoot? For example, any log file of Crystal Server we should look into? Or does Crystal Server has debug mode which prints more details to tell us what goes wrong?

Prithviraj Shekhawat wrote:
Hi Henry,
I believe you are using RAS SDKs to export the reports to PDF.
Apply trace on RAS server and check what you find in RAS logs.
Check whether you can see timeout error is RAS logs. Usually if connection is lost and the RAS server no more have the session to write to the temp directory, we do see these errors.
Also, does the account that runs RAS have permissions to create a file in RAS's default temp directory? Are you getting any out of memory or out of disk space exceptions on App server or RAS, tracing RAS server is the way to move forward.
Thanks,
Prithvi
>>I believe you are using RAS SDKs to export the reports to PDF.
Yes
>>Apply trace on RAS server and check what you find in RAS logs.
>>Check whether you can see timeout error is RAS logs.
How to configure tracing, and where are RAS logs? Is it configured in CMC --> Servers --> Crystal Report Services?
>>Also, does the account that runs RAS have permissions to create
>>a file in RAS's default temp directory?
Pretty sure yes.
>> Are you getting any out of memory or out of disk space exceptions
>>on App server or RAS, tracing RAS server is the way to move forward.
Not on App server.
For RAS, that's the problem, I am not sure where to look.......

Can not create temp file---- Error code:-2147215357 [CRSDK00000615] Error code name:internal

Hello,
While exporting Export reporting from BI4 getting exception
Can not create temp file---- Error code:-2147215357 [CRSDK00000615] Error code name:internal
In Trace Log I am getting
com.crystaldecisions.xml.serialization.XMLWriter||Failed to create an object instance for CrystalReports.TextObjectFormat
java.util.MissingResourceException: Can't find resource for bundle java.util.PropertyResourceBundle, key CrystalReports.TextObjectFormat
at java.util.ResourceBundle.getObject(ResourceBundle.java:374)
at java.util.ResourceBundle.getString(ResourceBundle.java:334)
I tried following solution according to the all forums but still issue exist.
Done changes mention in KB article In <Installation-dir-of-BO>\Common\4.0\java\CRConfig.XML we have to increase the JAVA heap MIN and Max size
<JVMMaxHeap>64000000</JVMMaxHeap> <JVMMinHeap>32000000</JVMMinHeap>
Increase the value in the ReportApplicationServer Services in the CMC for "Number of database records to read when previewing or refreshing a report". The value -1 is for unlimited records but not recommended for performance.
Check for temporary read write permission on server
Using SDK library from C:\Program Files (x86)\SAP Business Objects\SAP BusinessObjects Enterprise XI 4.0\java\lib
Can you please let me know is there anything missing.

Hi,
We face the same problem with some BI4 reports.
The same report works well with the "Crystal Reports Viewers API", as used in Infoview, but not with the "Report Application Server (RAS) API".
This error appears after some time working on a report. If we reproduce the same report, but from zero, no problem.
Hope it can help.
Ludovic.

File Error:Unknown File.

I am getting a "File Error:Unknown file" when i try and save my project. So i am not able to save any changes i make to my project. any thoughts?

Try FILE>Save Project As.
does that work?
Shane

"File error: unknown file" upon movie import

Got a DVD. Extracted the footage with Mac the ripper. Created an mp4 file with Handbrake. It plays fine in Quicktime at 720 by 480 and 23.98 FPS. I've tried importing it into FCP and I get the error, "File error: unknown file". FCP sequence presents are 24 FPS...I've also tried switching it to 23.98 FPS. I've re-encoded the movie in Quicktime to a .mov file with "DV/DVCPRO - NTSC" compression and it still will not import. Any suggestions?

Tried making an AVI in Handbrake. Handbrake just froze everytime and it would never finish.
I should also note that FFMpeg did not like the footage either and would not convert it to a file of any kind.
So I put the DVD into a consumer DVD player and used my Panasonic DVX100B camera to record the footage in VCR mode. The tape turned out fine.
BUT...
I am trying to capture the footage from another low end Canon camera. Usually there is no problem. However, with this particular footage from this cursed DVD, I get a "general error" when I try to capture the footage in FCP.
No matter what file format or media is used, this footage will not import into FCP. It must be watermarked to not like FCP.
Any further suggestions???

File Error: Unknown File when trying to render a Motion Lower third

I'm getting this: "File Error: Unknown File" when trying to render a Lower third made in the Motion tab. I'm using FCP 6.0.6 and haven't had any issues with this before. It seems to work fine if there is just text, but as soon as I apply any effect, like a drop shadow, I get that error message.
Thanks,
Joe

What's the exact format of the video you're working with and the exact specification the sequence you're editing in?

File Error - Unknown file when trying to import from HDD camera

I recently purchased a Panasonic SDR-H80 and am trying to get my widescreen footage into FCP. I converted the .MOD files to .m4v files in Handbrake, and they play and look fine in the Finder. However, when I try to move them into FCP, I get a dialog that says "File Error - Unknown file." I'm not sure what I'm doing wrong here. Can anybody help?

I converted the .MOD files to .m4v files in Handbrake .... I'm not sure what I'm doing wrong here
What you're doing wrong is using Handbrake and trying to use .m4v files in FCP. Neither is the correct process in preparing for editing.
Try using MPEG Streamclip and a format that actually works natively in FCP. .m4v is a final delivery format- not for editing. A search on this forum would have revealed that to you in a matter of seconds: http://discussions.apple.com/search.jspa?objID=c206&search=Go&q=handbrake
-DH

After upgrade to CF9, CFIMAGE "Unable to create temporary file" error

We recently upgraded from CF8 to CF9 Enterprise. I'm getting an "Unable to create temporary file" error on
my CFIMAGE resize calls. We use sandbox security. I assume I need to grant write access to whatever folder CF uses for temp files, but which folder is it? The same code (and sandbox settings) ran fine in CF8....
Note, if I attempt to add C:\JRun4\servers\cfusion\SERVER-INF\temp to the sandbox for this particular app, CF crashes on all requests across all apps on the server with a:
Security: The requested template has been denied access to C:\JRun4\servers\cfusion\cfusion-ear\cfusion-war\WEB-INF\cfclasses\cfapp2ecfc1510154633.c lass.
The following is the internal exception message: access denied (java.io.FilePermission C:\JRun4\servers\cfusion\cfusion-ear\cfusion-war\WEB-INF\cfclasses\cfapp2ecfc1510154633.c lass read)
ColdFusion cannot determine the line of the template that caused this error. This is often caused by an error in the exception handling subsystem.
I need to restart CF to get everything working again.

Another update. Had a problem with a sandboxed CF9 site doing a simple CFIMAGE READ to a memory variable. Got an "Unable to create temporary file" error.
Inserted the following code in the file upload page:
<cfscript>
writeoutput("Temp Dir : " & createobject("java","java.lang.System").getProperty("java.io.tmpdir") );
</cfscript>
... and it reveals the temp directory as C:\WINDOWS\TEMP. Added that to the sandbox, and the CFIMAGE READ is working properly now.
Note this seems inconsistent with CFIMAGE RESIZE behavior which appears to use the CF GetTempDirectory() value, which in my case is C:\JRun4\servers\cfusion\SERVER-INF\temp\cfusion-war-tmp\
For reference, see the section "Sandbox Considerations" at this link:
http://help.adobe.com/en_US/ColdFusion/9.0/Admin/WSc3ff6d0ea77859461172e0811cbf364104-7fc8 .html#WSc3ff6d0ea77859461172e0811cbf364104-7fcc

OraRRP Error with "Unable to copy data file;Error code 2, check disk space"

Hi,
Some users get this message -"Unable to copy data file;Error code 2, check disk space" when run report with orarrp, but most users do not get it.
I check free space at both server and client side, they are very sufficient.
I also checked directory exists for REPORTXX_TMP variable.
My user call reports via URL (rwservlet) and it occur for all reports.
How I can solve this problem?
Thanks in advance.
Tawatchai R.

Hi,
have the same problem now. One user has temporarily problems to download .rrpa files via URL (rwservlet) request. Error code: -"Unable to copy data file;Error code 2, check disk space". Did you get a solution??
Thanks in advance. Axel

Rep-0118:Unable to create temporary file error in Report Builder

I have installed Report Builder (latest edition) for windows 2000 server, but my users on windows XP cannot create the report it gives them
Rep-0118:Unable to create temporary file error
Please help me out
Vijay

You have to change registry settings by going through REGEDIT. Under hkey_local_machine/software/oracle/<oracle home>, look for variable REPORTS_TMP. Change value for this, for example c:\windows\temp or something like that where you want oracle reports to create temp files.

File Error!! It's Killing Me!

Similar Messages

Maybe you are looking for