File Ext Openning problem!

I have searched all over my mac high and low and can not figure out out to make the default file ext. open in the correct program example .doc, .eps, .psd, .pdf, .indd I can only right click and have it open in program if I double click all files open in preview. This problem occurred after I installed snow leopard, please help me

Select a file, choose File -> Get Info, set the app you want in the Open With pop-up and click the Change All button.

Similar Messages

WEBUTIL - file already open problem

Hy everybody,
I request your help for a problem with de Webutil library.
I want to open a PDF document with the command :
Ret := WEBUTIL_HOST.Nonblocking( Cmd ) ; (Cmd = path + file name)
This function is called on a "When Button pressed" trigger in my form.
The errors occurs when :
1/ I pressed my button, my PDf is well displayed.
2/ I didn't close my PDF and I click again on my button.
3/ I get the error "WUT-105 : Unable to open file"
I just want to know if exists a function which tell me if the document is already open. (WEBUTIL_FILE.FILE_IS_READABLE does not work any more !)
Or if I could catch the exception in my code. I've tried but I didn't manage to catch it.
If somebody could help me, thanks in advance. And sorry for my english, I'm just a french guy ... ;-)
Bye.

user10836197 wrote:
Ret := WEBUTIL_HOST.Nonblocking( Cmd ) ; (Cmd = path + file name)You only pass the path of the file? Did you try it with rundll32?
rundll32.exe url.dll,FileProtocolHandler test.txtOpens test.txt with the program I specified to always open textfiles with.
cheers

Qeustion about opening/closing two IMAQ VI's so that you don't have to struggle with the File already open problem

i have included a VI to explain my problem that's how my application is build only then a lil more complicated but i left it to the basics since i can't share my full VI. The case is that if you press start the program should start and load a movie however if you either go to the other tab or when you click 'start' again the program should close the IMAQ file i just get strangled by the fact that i have no clue which loop to stop and where to close the video. Help would be greatly appreciated
Attachments:
example.vi ‏51 KB

Hello Rinus,
I think having two parallel while loops in this case doesn't seem necessary (and should be avoided).
As you said, you want to close/stop the video "stream" in the first tab when you open the second Tab (and probably also the other way around).
This would mean that you'll have to use a "framework" that allows you to have several states and can detect a change between tabs, correct?
The easiest way to implement this is by using a Design Pattern as starting point.
Can you make a flow chart that fully explains what the requirements are of your program?
This will allow you to choose the right design pattern.
If you are not comfortable with flowcharts, then a more complete description of the requirements would allow me better to guide you to an appropriate "framework".
Based on the current requirements a simple state machine could maybe do the trick, but this of course depends on the additional (not yet mentioned) requirements you might have.
I'm asking this especially because you refer to a "more complicated" top level application.
Kind Regards,
Thierry C - Applications Engineering Specialist Northern European Region - National Instruments
CLD, CTA
If someone helped you, let them know. Mark as solved and/or give a kudo.

File Stream Open Problem with g++ 3.3.3 and libstdc++.so.5

Hi
I am facing one problem when I complie and run my code
with the following compiler and standard C++ library :
OS Used : SunOS GUILIN 5.8 Generic_108528-13 sun4u sparc SUNW,UltraAX-i2
Compiler Used : g++ 3.3.3
Standard Library Used : libstdc++.so.5
Problem : I am supposed to create 1000 file streams,
but when I run my program, it creates only 254 file streams,
after that assertion occurs!!!!
OUTPUT :
========
$ echo $SHELL
/usr/bin/sh
$
$ ulimit -n
50000
$
$ ./a.out
i : 253
errno : 24
Assertion failed: in, file main.cpp, line 28
Abort - core dumped
$
========
MY CODE :
==================================================
#include <sys/errno.h>
#include <assert.h>
#include <fstream>
#include <iostream>
#include <string>
extern int errno;
const int MAX_STREAM = 1000;
using namespace std;
int main(int argc, char* argv[])
ifstream in[MAX_STREAM];
string file("boo");
for ( int i=0; i != MAX_STREAM; i++ )
in[i].open(file.c_str());
if ( errno > 0 ) {
cout << "i : " << i << endl;
cout << "errno : " << errno << endl;
} // end of "if ( errno > 0 ) {"
assert(in[i]);
return 0;
===================================================
But, if I compile the exactly same program with the
following compiler and run the executable under the
same environment as above, it is running without
any problem and 1000 file streams are created
smoothly without any assertion.
OS Used : SunOS GUILIN 5.8 Generic_108528-13 sun4u sparc SUNW,UltraAX-i2
Compiler Used : g++ 2.95.3
Standard Library Used : libstdc++.so.2.10.0
Anybody can help me to overcome this problem with
g++ 3.3.3 compiler and libstdc++.so.5 library.
With Very Best Regards
Subrata Basak
MediaRing Ltd., Singapore

CVS differentiate text and binary files (they are marked as one or the other by using a CVS option when adding the file). If a file is marked as text, cvs will perform line-end conversion if needed.
On Linux, line endings are coded as LF, whereas on Windows they're coded as CRLF. When you copied files from Windows to Linux, you probably did a binary copy, which left the CRLFs intact. When you checked those files into CVS on the Linux server, Linux CVS did not convert the CRLFs into LFs.
The result of this is that if you check the files out on Linux, they will still contain CRLF (which is wrong for Linux). You may verify this by checking out a file on Linux, then opening it using vi -b. The CRs should show as extra ^M's at the end of each line.
If, on the other hand, you check out the file on Windows, a conversion will take place, where all LFs are converted to CRLF. The result of this is that your file will contain CRCRLF at the end of each line.
The best way to fix this is probably to check everything out on the Linux box, remove every CR from every file, then check everything back in again.

RE: [Adobe Reader] when i open pdf file it open all the pages but some pages give error massage (there was error processing a page,there was a problem reading this document 110) but if i open this page which give me error with google chrome it's work ? i

HelloThank's for your helpsI hope this document is helpfulBest Regards,
Date: Sun, 22 Jun 2014 17:10:17 -0700
From: [email protected]
To: [email protected]
Subject: when i open pdf file it open all the pages but some pages give error massage (there was error processing a page,there was a problem reading this document 110) but if i open this page which give me error with google chrome it's work ? if you can help me th
    when i open pdf file it open all the pages but some pages give error massage (there was error processing a page,there was a problem reading this document 110) but if i open this page which give me error with google chrome it's work ? if you can help m
    created by Anoop9178 in Adobe Reader - View the full discussion
Hi,
Would it be possible for you to share the document?
Regards,
Anoop
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6485431#6485431
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
     To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Adobe Reader by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

thank's for reply and your help
i did the step's that you told me but i still have the same problem
                                 i have the latest v.11.0.7
i
i disable the protected mode

HT3986 I've had MS Office:mac 2011 on my imac for around 18 months now. Outlook has just disappeared and when I find the file and open it it tells me that there is a problem and I may need to re-install it. I've just done this using the installation dis

I've had MS Office:mac 2011 on my imac for around 18 months now. Outlook has just disappeared and when I find the file and open it it tells me that there is a problem and I may need to re-install it. I've just done this using the installation disc which, then said the installation had been successful.
Outlook is still not working. Can anyone please advise me on what to do next.

Remove MS Office 2011 completely (here are instructions) and reinstall it.
It's not a simple or fast process but it is important to follow all of the steps in order to get all the files that Office scatters around. This will not affect your data files, only MS Office and its preferences.

When i open pdf file it open all the pages but some pages give error massage (there was error processing a page,there was a problem reading this document 110) but if i open this page which give me error with google chrome it's work ? if you can help me th

when i open pdf file it open all the pages but some pages give error massage (there was error processing a page,there was a problem reading this document 110) but if i open this page which give me error with google chrome it's work ?
if you can help me thank's
[email address removed by host]

thank's for reply and your help
i did the step's that you told me but i still have the same problem
i have the latest v.11.0.7
i
i disable the protected mode

Launching Microsoft Access from Internet Explorer to view a downloaded MDB file opens the wrong file (not a problem if I use Firefox)

When clicking on a link (in Internet Explorer 9) to download an Access MDB file and then choosing to open the file directly in Microsoft Access (2007) instead of saving it, the file is copied to Temporary Internet Files but Microsoft Access tries to open
a different file and displays an (Unrecognized database format) error.
When I click on the option to open the file, the MDB file is copied to Temporary Internet Files\Content.IE5 but instead of that file, Access tries to open a different (incorrect) file located in Temporary Internet Files\Content.MSO (e.g. in the above error
message, NativeView.do is an XML file containing an error message).
I don't see this problem with Word, Excel or PowerPoint files. When opening a Word file (without saving) the Word file is copied to Content.IE5 but an identical .tmp file is created in Content.MSO which when opened in Microsoft Word displayed the required file
correctly. The same happens for Excel files. PowerPoint appears to be handled a little differently (no .tmp file created in Content.MSO but the required file is still copied to Content.IE5) but the PPT file is still opened correctly in Microsoft PowerPoint.
I think the Content-Type "application/msaccess" is fine because Internet Explorer does launch Microsoft Access. It just tries to open the wrong file (or so I think). However, it looks like the file type is not being determined. Here is what I noticed
when trying to open different Microsoft Office files using Internet Explorer:
The last one is the MDB file. As you can see, only for this type of file, the "Type" (Microsoft Office Access 2007?) is not displayed in this Open/Save dialog box.
On Firefox, I don't see this problem. When I tried clicking on the link to the MDB file in Firefox, Microsoft Access was launched and the file was opened correctly. Is there something I can do so the MDB file is opened properly using IE? I can add/change headers
in the HTTP response that writes this file to the output stream (on disk) if that helps.
Thanks for your time!

Sounds like a problem symptom to be discussed in either an IE forum or an Access forum, not here. How did you come to post here? ForumsRedesign. That might be an on-topic issue for this forum. <eg>
Can you find your way to either of those other forums easily from here? Another on-topic question for here I think. ; )
Robert Aldwinckle
Oops, my bad. Thanks for letting me know! :)
I've re-posted it here: http://social.technet.microsoft.com/Forums/ie/en-US/1a818501-296c-42fb-8abb-ba914629c962/launching-microsoft-access-from-internet-explorer-to-view-a-downloaded-mdb-file-opens-the-wrong-file?forum=ieitprocurrentver
Hopefully that's the right place for this.
Cheers!

Cannot open htlm file firefox opens new tab and keeps asking to open or save file ran malware bytes no problems found

When trying to open an html file firefox keeps opening the open file dialog in a new tab. I have run malware byte with no success.
The file never opens.
Finally refreshed Firefox problem resolved...

I am happy to hear that you solved it I will lock the thread.

File transfer Open dataset CSV file Problem

Hi Experts,
I have an issue in transferring Korean characters to a .CSV file using open dataset.
data : c_file(200) TYPE c value '
INTERFACES\In\test8.CSV'.
I have tried
open dataset c_file for output LEGACY TEXT MODE CODE PAGE '4103'.
open dataset c_file for output    in TEXT MODE ENCODING NON-UNICODE.
open dataset c_file for output    in TEXT MODE ENCODING Default.
Nothing is working.
But to download to the presentation server the below code is working. How can the same be achieved for uploading the file to application server.
CALL METHOD cl_gui_frontend_services=>gui_download
      EXPORTING
        filename                = 'D:/test123.xls'
        filetype                = 'ASC'
        write_field_separator   = 'X'
        dat_mode                = 'X'
        codepage                = '4103'
        write_bom               = 'X'
      CHANGING
        data_tab                = t_tab
      EXCEPTIONS
        file_write_error        = 1
        no_batch                = 2
        gui_refuse_filetransfer = 3
        invalid_type            = 4
        no_authority            = 5
        unknown_error           = 6
        header_not_allowed      = 7
        separator_not_allowed   = 8
        filesize_not_allowed    = 9
        header_too_long         = 10
        dp_error_create         = 11
        dp_error_send           = 12
        dp_error_write          = 13
        unknown_dp_error        = 14
        access_denied           = 15
        dp_out_of_memory        = 16
        disk_full               = 17
        dp_timeout              = 18
        file_not_found          = 19
        dataprovider_exception = 20
        control_flush_error     = 21
        not_supported_by_gui    = 22
        error_no_gui            = 23
        OTHERS                  = 24.

Hi,
I would recommend to use OPEN DATASET ... ENCODING UTF-8 ...
If your excel version is unable to open this format, you can convert from 4110 to 4103 with report RSCP_CONVERT_FILE.
Please also have a look at
File upload: Special character
Best regards,
Nils Buerckel

Opening CS6 file in CS5 : Problems were encountered reading layers

because the specified color book cannot be found - help please? The file is opening without any colors and as i am trying to set the file up to print, it is VITAL that i have colors. Thanks for any help

http://helpx.adobe.com/photoshop/kb/error-could-complete-request-specified.html

Problems getting files to open in browser from SP 2010 search results page

We are in day 4 of having upgraded from MOSS 2007 to SharePoitn 2010 via database attach.
When a user looks in their document library, and clicks on a PDF, they are asked if they want to check out and open or just open, and when they make the selection, acrobat reader opens the doc.
When a user performs a search on the same library, and clicks on a PDF in the results page, the user is prompted if they wish to download the file, and then, after they save it, the file is downloaded and nothing else happens.
The users do not want their disks filled with unnecessary copies of files.
Note that I did add an "application/pdf" mime type to the allowedInlineDownloadedMimeTypes property .
This is only occuring when using the download results page.
Does anyone know a fix for this?
Thank you.

Hi lwvirden，
Generally, if the PDF is added to the Web Application's AllowedInlineDownloadedMimeTypes property , the PDF files will open in browser when clicking them regardless of on the search result page or the document library.
I recommend to delete the PDF from the Web Application's AllowedInlineDownloadedMimeTypes property and then re-add it to see if the issue still occurs.
Here is a table summarizes the various PDF rendering behaviors in search and library in the link below(same for SharePoint 2010):
http://stevemannspath.blogspot.in/2013/04/sharepoint-2013-pdf-support-and.html
More reference:
http://social.technet.microsoft.com/wiki/contents/articles/8073.sharepoint-browser-file-handling-deep-dive.aspx#DownloadFunctions
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Problem in accessing application server file using open dataset

Hi All,
I am trying to access application server file using open dataset command, its working fine for normal path which imention. But when i am giving path of XI server file, its not working. How to access XI server file using open dataset. Please let me know.
Thanks in advance.
Regards,
Vishal

Hi Vishal,
You need to verify if the location where you are trying to save the file is in the same server of SAP. In case that the location is in other server you need to map that directy into the same server of SAP.
You need to point always to a location in the same server of SAP, in order that the open dataset could work.
Regards,
Eric

Generally when creating a Word file from either a Mac or Win7 pc and opening it on two different machines (either one first) it always prompts that the file is open and will be opened as read only. However opening a CSS file does not prompt that it is alr

Generally when creating a Word file from either a Mac or Win7 pc and opening it on two different machines (either one first) it always prompts that the file is open and will be opened as read only.
However opening a CSS file does not prompt that it is already open on or from any machine which is causing code edits to be lost.
What we found from out testing:
- The file can be saved from one user to the server and WILL NOT PROMPT on other machines until the saving machine has the Dreamweaver program closed completely
- The file can be closed and Dreamweaver minimised to the launch bar but it still will not register on other machines that it has been changed.
- Also, until the Dreamweaver program is closed on the machines, it will continue to open it's saved version of the file.
Example Scenario:
- User 1 opens test.css (which is 2000 lines) and adds some code to the end of the file to bring it up to 2500 lines
- Meanwhile User 2 opens test.css as well (opens as 2000 lines as User 1’s edits have not yet been saved) and adds in code to bring it to 2300 lines
- User 1 saves his file and closes it - but Dreamweaver is still open.
- User 2 also saves his file and leaves Dreamweaver open.
- The server will report the size and last edit of the file the same as User 2 as he was the last person to save it (and if you open from the Win7 Machine it will show as User 2’s 2300 line version)
- If User 1 then open's the file again (from either the 'recent' in Dreamweaver OR clicking on the file directly in Finder...which version opens.... The version that User 1 saved! Not the true version on the server, but the version that User 1 edited and saved with 2500 lines in it.
- Same for User 2, he will open 'his' version with 2300 lines in.
Other information:
- Files are opened directly from the server
- Sometimes the users will save incrementally and re-open
- Most of the time users will save incrementally and keep the files open
- The users will never not save incrementally and just save when closing the file once finished
- The users are usually working on the files all day
- It is always the bottom lines of code that are lost. It could be a case of the two versions being mixed up and cutting off the newly added lines based on the line count (possibly).
It is as if Dreamweaver is holding a cache of the version locally and then only properly looking back to the server when it has been completely closed. It is very difficult to see how the server is causing such an impact on these files, there are very few logs which are giving any indication to the root cause of the problems.
Anyone know if this is a known issue?
Is there a way that there can be a featured implemented on the server that doesn't allow another user to open a file if it is already open on another machine?
Thanks

Your server file handling has nothing, and really nothing to do with Adobe software. If files don't get locked for (over-)writing and/or lose connection to the program opening them, then your server is misconfigured. It's as plain and simple and that. Anything from "known file types"/ file associations not being set correctly, MIME types being botched, crooked user privileges and file permissions, missing Mac server extensions, delayed file writing on the server, generic network timeout issues and what have you. Either way, you have written a longwinded post with no real value since you haven't bothered to provide any proper technical info, most notably about the alleged server. Either way, the only way you can "fix" it is by straightening out your server and network configuration, not some magic switch in Adobe's software.
Mylenium

Cannot delete exe files - The action can't be completed because the file is open in Windows Explorer

We have received 3 new computers with Windows 8.1. All of us 3 have the same problem: we cannot delete exe files with message "The action can't be completed because the file is open in Windows Explorer"
For example, I download skypeinstall.exe on desktop, install the program correctly and then try to delete the file: file is in use by Windows Explorer, cannot be delete.
We reboot computer, we are able to delete the file. But, if I restore the file from the recycle bin on the desktop, I cannot delete it again until I reboot the PC. I used ProcessExplorer to see what is locking it and I can see 5 instances of explorer.exe
locking the file.
I can always reproduce the same way:
1-Reboot
2-Delete exe file
3-Restore file
4-Delete stop working and 5 explorer.exe handle are locking it.
I have tried the following so far after reading multiple threads:
- De-activating Windows Search service
- Activating User Experience service
- Deleting from command prompt (no success)
- In folder options: inactivate display icon on thumbnail and activate always display icons, never thumbnail
- Changing folder view (contents, detail, small icons...)
- Using Lock Hunter - not working until reboot
None of these worked.
We all have Windows 8.1 with Crucial SSD drive, could the problem be linked with the SSD drive incompatibility?
Any help would be appreciated.

Hi,
Please try to make a clean boot for your system, then check if this problem resolved.
Clean Boot: http://support.microsoft.com/kb/929135
If problem persists, try to open Resource Monitor to check handle of Explorer.exe, if there any exception, end them for test.
Roger Lu
TechNet Community Support

File Ext Openning problem!

Similar Messages

Maybe you are looking for