File length not recognized

Hello all
I searched but could not find the answer to my problem, so thank you for any help you can provide.
I have a new HXR-NX3 I am evaluating to replace my PD170 cams. Using DV mode on the cam, I am unable to properly import the video files into PPro CS6. The 2GB files are 9:47 each, but PPro only sees 2:37.  I can import the files into Premiere Elements 7 and join them in the timeline with no problems.
So why can CS6 not see the entire length of the clips?
The HD test recordings I've done seem to be ok, but I need the DV mode to work as well.
Thanks

I've never imported footage via firewire, not directly to the computer that is. The setup I've used for years now, I've recorded from the PD170 via firewire to various DV recorders. Currently using Focus-Vitec H200 Pro Compact Flash recorders. That gives me a single dv-mov file, anywhere from 14-17GB usually, that I can import into Premiere. I'm also using one older Focus hard drive based recorder that makes multiple 2GB dv-avi files that I join manually in the timeline and re-encode into a single file. In the past I've also used recorders that made single large dv-avi files. All of these methods worked fine.
The only thing different in the new process is the camera. The NX3 has built in SD card recording so I don't have to use external recorders.  Eventually I'll probably switch to hidef, and the Sony CMU software seems to import that just fine. But for as long as I'm using a mix of NX3 and PD170 cams I'll need to use DV.
Thanks

Similar Messages

  • Trying to upload raw cr2 files and Lightroom says "file is not recognized"

    Backstory: I photographed a VERY important commercial shoot today and I went to upload the photos to Lightroom. The first 30 images uploaded just fine, but the rest won't. Lightroom says the file is not recognized by the raw format support in Lightroom (401). Everything is updated in my computer... Lightroom, Photoshop ect. Photoshop also says that the file cannot be read. I can't open them in iPhoto or preview either. BUT I can see the thumbnail when I click the camera card reader on the desktop. I am uploading from a card reader as well. I shot with this card yesterday and everything was fine. I NEVER delete photos off my camera, and I always format it. If it is corrupted, how do you I find that out, and is there anyway to get my photos back?
    Is there anything I can do to fix this? I am panicking. Help, please.
    Thank you in advance

    The two raw files you've uploaded to dropbox are corrupted so Lightroom and Photoshop are giving you the correct message.  At least with these two, the embedded JPG preview is there but the raw data is not correct so cannot be rendered.  Here is the error that Canon's own software gives when the files are attempted to be edited:
    You should reattempt to copy the images from the memory cards to your computer using a card reader and an operating-system function (Explorer or Finder) to do it rather than LR or a cable connected to the camera, then see if things work any better.  If you already used a card reader, then try a different one and see if the situation improves.
    If you cannot get a better set of images by retransferring them, then we can work through how to extract the embedded JPG previews en masse.

  • Is there a way to restore photos from Drop box to my desktop iPhoto in a large batch instead of one at a time? I tried and a zip file was downloaded but won't open. Says file format not recognized.

    Is there a way to restore photos from Drop box to my desktop iPhoto in a large batch instead of one at a time? I tried and a zip file was downloaded but won't open. Says file format not recognized. I see how to do it one at a time with the "download" button in Dropbox but that's so cumbersome for lots of photos.

    Have you tried these avenues?
    Contact us - Dropbox
    Dropbox Help Center
    Dropbox Forums
    Submit a help request - Dropbox
    OT

  • HT3775 Hi, my mac which is on 10.7.5 osx. but when ever i insert any mpeg/avi video cd it shows the file format not recognized. i am fed up of this. plz somebody help me. what should i do now.

    hi,
              i am using 10.7.5 lion there are a lot of problems in this OS.
    like most of the programs quit's unexpectedly. some programs does not work on it. like adobe cs5 is not working. everytime time when i do click on adobe cs 5 icon it shows a message "To open “Adobe Photoshop CS5,” you need to install a Java SE 6 runtime, but you are not connected to the Internet.To install a Java SE 6 runtime later, open “Adobe Photoshop CS5” again" while i always remain connected on the net.
    2. when ever i insert an avi or mpeg video disk it shows the file format not recognized. to **** with this macbook pro n its 10.7.5 lion. the same disk works/runs on windows on windows systems.
    plz somebody help me what should i do now.
    [email protected]

    it sounds like a fualty installation of Lion, this may happen from time to time.
    The best thing to do in this situation is to reinstall Lion. You will not loose anything doing this, but you should always keep back ups of your information.
    http://www.apple.com/osx/recovery/
    basically hold Cmd+R on boot..
    first go to disk utility, verify and repair your disks and permissions. Exit out of Disk utility and then go directly to "reinstall Lion"
    choose that and let it reinstall.
    Adobe CS6 does need Java to run.
    To play your movies you might need to get an application called VLC. VLC is a free app and will play most videos and music files you throw into it.
    http://www.videolan.org/vlc/download-macosx.html
    you have a 64bit intel mac, so get the one for that.

  • I need help! when I am importing my NEF files from my D3300 camera into lightroom 5 and try to use the "copy as DNG" button I always get an error message saying that "saying the file is not recognized by the raw format support"

    I need help! when I am importing my NEF Raw files from my D3300 camera into lightroom 5 and try to use the "copy as DNG" button I always get an error message saying that "saying the file is not recognized by the raw format support". The whole purpose of that button is so that the file can be recognized... How can I make the "copy as DNG" button work as it is supposed too?? Thank you

    Thank you for responding. So I essentially will never be able to use that button in lightroom 5? do I need to get LR 6? Will there ever be an update for LR 5 that will enable me to use it?
    Does DNG Converter work within LR or do I have to upload pictures to my computer and then make a second copy in DNG format. and then go into LR and use them?
    Thank you @dj_paige

  • I can't open my photo's in Bridge because the camera (Canon EOS D650) RAW file is not recognized?

    Ik kan in Bridge mijn foto's via photodownloader niet openen omdat RAW bestand van camera (Canon EOS 650D) niet ondersteund wordt, ook niet na updates?

    Beste,
    Ik heb Photoshop CS6, maar blijkbaar wordt mijn camera Canon EOS D650 niet ondersteund.
    Mvg,
    Op 14-jan-2015, om 21:39 heeft Ronald Keller het volgende geschreven:
    I can't open my photo's in Bridge because the camera (Canon EOS D650) RAW file is not recognized?
    created by Ronald Keller in Bridge General Discussion - View the full discussion
    Welke versie van Photoshop heb je? Voor die camera heb je minstens CS6 nodig.
    Camera Raw-compatible Adobe applications
    Camera Raw plug-in | Supported cameras
    If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7096583#7096583 and clicking ‘Correct’ below the answer
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7096583#7096583
    To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
    Start a new discussion in Bridge General Discussion by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

  • My lightroom 4 will not import my files from my compact flash card . It has been working for years with out fail but now there is no import previews and it says the files are not recognized by raw format support in LR

    I have lightroom 4 I've had it for years and it has imported my raw files from my CF card without issue . Now when I plug in my CF card to import new files it says import operations not performed and there are no image previews . When I continue by hitting "import" I get a pop up window that states "the files are not recognized by raw format support in Light Room"

    Don't feel too bad.  If the D4S has as many menus and custom functions as my Canon 5D Mark iii its easy to get messed up.
    If you downloaded from the link I gave you it will be Lr 5.4.   The link was just to show you when the D4S was supported.  The newest version is 5.7.1 and can be downloaded here.  Don't know your OS so you will have to pick Windows or Mac.   Product updates
    On my Mac I just run the downloaded installer program (its a full version and not an small update) and it installs the new version and erases the old version.  If you are on Windows you will have to get help from a windows person. 

  • Just purchased Nikon D610. tried to import 3 images and got this message: The files are not recognized by the raw format support in Lightroom. How do I fix this frustrating problem. Have been using Lightroom for years also Nikon products without any prior

    How do I import images. Have a message that says: The files are not recognized by the raw format suppot in Lightroom. Am using a Mac version 10.9.4. the import is from a new Nikon D610. Am using LR 4.4 Please help Adobe is useless as a support.

    Each camera must be supported explicity and your LR version is years older than your camera.
    According to Adobe's Camera-support page, you need at least LR 5.3 to work with your D610 NEFs in LR:
    Camera Raw plug-in | Supported cameras
    If you don't want to upgrade to LR 5, or can't due to your OS being too old, then it might work to use the latest DNG Converter and create DNGs from your NEFs, which should open in LR 4.x.  You can find the DNG Converter here:  http://www.adobe.com/downloads/updates

  • Im running lightroom 4 and just purchased the Sony A7 and using its sd card. when I   tried to load the photos, I got a message "the files are not recognized by the raw format support in lightroom"

    Tried loading my raw files shot w my new Sony a7 and its sd card into lightroom4. Got a message: "The files are not recognized by the raw format in lightroom"
    Does Lightroom 4 not work with the Sony A7?
    Thanks,

    Lightroom 4 cannot read the RAW photos from a Sony A7
    You would have to download and install the FREE Adobe DNG Converter version 8.5 and then convert your RAW to DNG, and then import the DNGs into Lightroom 4
    You could also purchase Lightroom 5.5, which will have the capability to read the RAWs directly.

  • I have iphoto 6 and my pictures are no longer showing.  I have tried importing them but it just give me an error msg. (file format not recognized) I have tried rebuilding the iphoto library but that doesn't work either. Any suggestions?

    I have iphoto 6 and my pictures are no longer showing.  I have tried importing them but it just give me an error msg. (file format not recognized) I have tried rebuilding the iphoto library but that doesn't work either. Any suggestions?

    How did you rebuild?
    Try these in order - from best option on down...
    1. Do you have an up-to-date back up? If so, try copy the library6.iphoto file from the back up to the iPhoto Library allowing it to overwrite the damaged file.
    2. Download <a href="http://www.fatcatsoftware.com/iplm/"><b><u>iPhoto Library Manager</b></u></a> and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
    3. If neither of these work then you'll need to create and populate a new library.
    To create and populate a new *iPhoto 6* library:
    Note this will give you a working library with the same Rolls and pictures as before, however, you will lose your albums, keywords, modified versions, books, calendars etc.
    Move the iPhoto Library to the desktop
    Launch iPhoto. It will ask if you wish to create a new Library. Say Yes.
    Go into the iPhoto Library on your desktop and find the Originals folder. From the Originals folder drag the individual Roll Folders to the iPhoto Window and it will recreate them in the new library.
    When you're sure all is well you can delete the iPhoto Library on your desktop.
    In the future, in addition to your usual back up routine, you might like to make a copy of the library6.iPhoto file whenever you have made changes to the library as protection against database corruption.

  • Libc.so: file not recognized: File format not recognized

    Hi,
    While running the "cd $ORACLE_HOME/procbuilder60/lib; make -f ins_procbuilder.mk install"
    i am getting the error.
    [appldev@datadev lib]$ cd $ORACLE_HOME/procbuilder60/lib; make -f ins_procbuilder.mk install
    rm -f de60desm /appldev/devora/iAS/6iserver/bin/de60desm
    - Linking de60desm executable...
    gcc -o de60desm -L/appldev/devora/iAS/6iserver/lib/ -L/appldev/devora/iAS/6iserver/lib/ -L/appldev/devora/iAS/6iserver/lib//stubs/ \
    /appldev/devora/iAS/6iserver/procbuilder60/lib/detk2.o /appldev/devora/iAS/6iserver/procbuilder60/lib/demsr.o /appldev/devora/iAS/6iserver/procbuilder60/lib/demcl.o \
    /appldev/devora/iAS/6iserver/procbuilder60/lib/ui10.o /appldev/devora/iAS/6iserver/procbuilder60/lib/uiicxd.o \
    /appldev/devora/iAS/6iserver/rdbms/lib/defopt.o -lde60 \
    -lca60 -lucol60 \
    -lnvu60 -lnvc60 -lnvs60 -luicc60 -lmmiw60 -lmmov60 -lmma60 -lmmos60 -lmmoi60 -lmmia60 -lmmft60 -lmmcm60 -luihx60 -luihx60 -luc60 -luipr60 -luimotif60 -lot60 -lrem60 -lree60 -lrec60 -luiimg60 -luimotif60 -luipr60 -luiimg60 -luc60 -lrem60 -luimotif60 -luia60 -ltknqap60 -luipr60 -luimotif60 -lutt60 -lix60 -lixd60 -lrod60 -lror60 -lros60 -lrod60 -lror60 -lros60 -lrod60 \
    -luat60 -lutc60 -lutl60 -lutsl60 -lplsf -lplsb -lextp /appldev/devora/iAS/6iserver/lib/libpsd.a -lplsf -lplsb -lextp \
    -lslax /appldev/devora/iAS/6iserver/lib/nautab.o /appldev/devora/iAS/6iserver/lib/naeet.o /appldev/devora/iAS/6iserver/lib/naect.o /appldev/devora/iAS/6iserver/lib/naedhs.o `cat /appldev/devora/iAS/6iserver/lib/naldflgs` -lnetv2 -lnttcp -lnetwork_d -lnz -lnzr -lnsslb8 -lbcert -lncr -lnetv2 -lnttcp -lnetwork_d -lnz -lnzr -lnsslb8 -lbcert -lclient -lvsn -lcommon -lgeneric -lmm -lnlsrtl3 -lcore4 -lnlsrtl3 -lcore4 -lnlsrtl3 -lnetv2 -lnttcp -lnetwork_d -lnz -lnzr -lnsslb8 -lbcert -lncr -lnetv2 -lnttcp -lnetwork_d -lnz -lnzr -lnsslb8 -lbcert -lclient -lvsn -lcommon -lgeneric -lepc -lnlsrtl3 -lcore4 -lnlsrtl3 -lcore4 -lnlsrtl3 -lclient -lvsn -lcommon -lgeneric -lnlsrtl3 -lcore4 -lnlsrtl3 -lcore4 -lnlsrtl3 `cat /appldev/devora/iAS/6iserver/lib/sysliblist` -ldl -lpthread -lm -L/usr/lib -lm -L/usr/X11R6/lib -lXm -L/usr/X11R6/lib/ -L/usr/X11R6/lib/ -lXt -lX11 -lm -lix60 -lixd60 -lX11 -lnlsrtl3 -lXp -lXext
    /appldev/devora/iAS/6iserver/lib//stubs//libc.so: file not recognized: File format not recognized
    collect2: ld returned 1 exit status
    make: *** [de60desm] Error 1
    My OS version is RHEL 5.
    Please suggest.
    Thanks in advance.

    But We are facing another issue while running "cd $ORACLE_HOME/reports60/lib; make -f ins_reports60w.mk install"
    [appldev@datadev lib]$ export LD_LIBRARY_PATH=/appldev/devora/8.0.6/network/jre11/lib/i686/native_threads/
    [appldev@datadev lib]$ cd $ORACLE_HOME/reports60/lib; make -f ins_reports60w.mk install
    Last few lines Error:
    ld -shared -o rwows60.so -z text -G -export-dynamic -L/appldev/devora/8.0.6/lib/ -L/appldev/devora/8.0.6/network/jre11/lib/linux/native_threads -L/appldev/devora/8.0.6/network/jre11/lib/i686/native_threads /appldev/devora/8.0.6/reports60/lib/rxmawt.o /appldev/devora/8.0.6/reports60/lib/rwsows3.o /appldev/devora/8.0.6/reports60/lib/rwswif.o /appldev/devora/8.0.6/reports60/lib/rwswcj.o /appldev/devora/8.0.6/reports60/lib/rwswcs.o /appldev/devora/8.0.6/reports60/lib/rwswm.o /appldev/devora/8.0.6/reports60/lib/rwsws.o /appldev/devora/8.0.6/reports60/lib/rwswcm.o /appldev/devora/8.0.6/reports60/lib/rwswk.o /appldev/devora/8.0.6/reports60/lib/rwswu.o /appldev/devora/8.0.6/reports60/lib/rwswur.o /appldev/devora/8.0.6/reports60/lib/rwswx.o -lzrc60 -lca60 /appldev/devora/8.0.6/lib/nautab.o /appldev/devora/8.0.6/lib/naeet.o /appldev/devora/8.0.6/lib/naect.o /appldev/devora/8.0.6/lib/naedhs.o -lnetv2 -lnttcp -lnetwork_d -lnz -lnzr -lnsslb8 -lbcert -lncr -lnetv2 -lnttcp -lnetwork_d -lnz -lnzr -lnsslb8 -lbcert -lclient -lvsn -lcommon -lgeneric -lmm -lnlsrtl3 -lcore4 -lnlsrtl3 -lcore4 -lnlsrtl3 -lnetv2 -lnttcp -lnetwork_d -lnz -lnzr -lnsslb8 -lbcert -lncr -lnetv2 -lnttcp -lnetwork_d -lnz -lnzr -lnsslb8 -lbcert -lclient -lvsn -lcommon -lgeneric -lepc -lnlsrtl3 -lcore4 -lnlsrtl3 -lcore4 -lnlsrtl3 -lclient -lvsn -lcommon -lgeneric -lnlsrtl3 -lcore4 -lnlsrtl3 -lcore4 -lnlsrtl3 -ldl -lm -lpthread -ldl -lpthread -lm -L/usr/lib -lm -lc
    /usr/lib/libc.so: file not recognized: File format not recognized
    make: *** [rwows60.so] Error 1
    Kindly suggest..What is the document/step you are following?
    Thanks,
    Hussein

  • "/usr/bin/strip: File format not recognized" while packing

    Hi.
    I would build a package for wingide but after the build process came a strange error:
    $ makepkg
    ==> Erstelle Paket: wingide 3.0.4-1 (Do 13. Mär 17:10:33 CET 2008)
    ==> Prüfe Laufzeit-Abhängigkeiten...
    ==> Prüfe Buildtime-Abhängigkeiten...
    ==> Empfange Quellen...
    -> wingide-3.0.4-1-i386-linux.tar.gz im Build-Verzeichnis gefunden
    ==> Überprüfe Gültigkeit der Quell-Dateien mit md5sums...
    wingide-3.0.4-1-i386-linux.tar.gz ... Durchgelaufen
    ==> Entpacke Quellen...
    -> bsdtar -x -f wingide-3.0.4-1-i386-linux.tar.gz
    ==> Entferne existierendes pkg/ Verzeichnis ...
    ==> Betrete fakeroot-Umgebung ...
    ==> Beginne build()...
    ==> Säubere Installation...
    -> Entferne info/doc-Dateien...
    -> Komprimiere Man-Pages...
    -> Entferne Debugging-Symbole aus Binär-Dateien und Bibliotheken...
    /usr/bin/strip: opt/wingide/bin/2.4/src/debug/tserver/64bit/tdbgtracer24.so: File format not recognized
    the PKGBUILD file:
    # Contributor: Andreas Schönfelder <[email protected]>
    pkgname=wingide
    pkgver=3.0.4
    pkgrel=1
    pkgdesc="The intelligent development environment for python programmers"
    url="http://www.wingware.com"
    license=
    arch=('i686')
    source=(http://wingware.com/pub/$pkgname/$pkgver/$pkgname-$pkgver-$pkgrel-i386-linux.tar.gz)
    md5sums=('0fd31ac2e7851d1b777f8c100f480e40')
    build()
    cd $startdir/src/$pkgname-$pkgver-$pkgrel-i386-linux
    mkdir -p $startdir/pkg/{opt/wingide,usr/bin}
    tar -xC $startdir/pkg/opt/wingide -f binary-package-$pkgver-$pkgrel.tar
    sed -e "s/^DIR=.*$/DIR=\/opt\/wingide/" -i $startdir/pkg/opt/wingide/wing
    mv $startdir/pkg/opt/wingide/wing $startdir/pkg/usr/bin
    # vim:syntax=sh
    Greets, Andreas
    Last edited by echasslau (2008-03-13 16:14:05)

    Adding options=(!strip) to the PKGBUILD will skip that step, but make other binaries significantly larger. If you just get the output but that package is built successfully, I would ignore it.

  • Canon 7D Mark II error "Files are not recognized by the raw format support in Light (149)"?

    Has anyone tried to load raw files from a Canon 7D Mark II I get an error "Files are not recognized by the raw format support in Light (149)"?

    Based on previous experience, I expect the final versions of LR, ACR and DNGC to be released simultaneously.  We have so far seen Release Candidates of ACR and DNGC but not LR.
    Unless there needs to be a second ACR/DNGC Release Candidate which happens once every few years for special circumstances, which I don't see any of at the moment.

  • I've got LR5.7 and Camera Raw 8.7 and my Fuji X-Pro 1 files are not recognized. How to make good ? Thank you

    I've got LR5.7 and Camera Raw 8.7 and my Fuji X-Pro 1 files are not recognized. How to make good ? Thank you

    Do you get an error message? What - exactly - does it say?

  • Help. I can't open any of my project files,"Project file version not recognized". Whats going on?

    After uninstalling and reinstalling Prelude CC none of my project files will open.
    I get the notice "This version of the project file is not recognized!"
    I have no idea how to troubleshoot this. Any help would be greatly appreciated.

    So after 3 hours of painful chat, Adobe Finally gave me the solution. They wouldn't answer my question without trying a bunch of things that I had said I already did, so hopefully this helps some people.
    Somehow, updating was disabled, or suppressed, my the administrator (that's me). Adobe kind of forgot to give the administrator a way to then reenable that for users. You'd think that would be something the administrator would control from the admin console online, but no. You set it up once on install, then everyone is just stuck with whatever version they installed at the time. But good news! There's a file that suppresses that. You Might be able to simply delete it. I'm not sure.
    But if you need to fix it, here it is. All 2 minutes that it will take you. Do NOT contact Adobe. Their help system is incredibly inefficient (but then again, aren't most?):
    go here: C:\Program Files (x86)\Common Files\Adobe\AAMUpdaterInventory\1.0
    see an adobeUpdateradminprefs.dat file? Open that in notepad (or notepad++ or equivelant if you like that better)
    Change the 1 to a zero and save.
    That's all. That Should have been a known item, and would take all of 10 seconds to check, but I had to uninstall and reinstall several things before we went to a folder. Because uninstalling reinstalling is easier? ha
    Now in response to Ramesh:
    1. the issue is moot because previous versions of prelude can not open future versions. That's all over the web. So just make sure you have the current version.
    2. we are now both at the current version.
    3. offline media? we hadn't figured that out. If she closes the file and opens it again it seems to go away. So that's an unknown. And it's working now, so I don't really care.

Maybe you are looking for