File Not Compatible Error - CS4

I cannot open a PSD file I was working on the day before.
I get 'Could not complete your request because the file is not compatible with this version of Photoshop'
I created this file using CS4 and was opening yesterday fine.
This has never happened with PS files before.

I saved on my HD
It looks to be about the right size.
I did do some moving around of the folder it was in, andc it uses vector smart objects. I wonder if that screwed it up. So I placed it back where it was originally and still no such luck.
I havn't checked for disk failures. Is that in utilities? My computer has been acting very strange lately (not sleeping when closed, powering uo the HD for no reason etc)\
Here's my specs
Macbook Pro
OSX 10.6.8

Similar Messages

Getting "file not compatible" error on my Samsung Galaxy

Hi,
I have just recently got the lastest version of Adobe Photoshop and when I try to install it on my samsung galaxy it just says that this file is not compatible, anyone got any ideas how to resolve this problem
Skyler

Hi,
I suppose you are using the Samsung Galaxy Tab.
Normally if you can install it over the Market Web interface it should be compatible - you shouldn't even be able to see it in the Market app unless you are compatible.
Do you get the error from the Market application or when trying to start the application - i.e. does the application exist on your device?
It would also be good to know the exact model number as well as language you're using and what country your in.
What you could try out would be to clear the Market cache and then retry the install.
Thanks,
Ignacio

File not compatible error message

The file is .psb (large document format). I am on a mac, OSX10.7.3, PS CS5.1. I have been working on this file for some time, and this message suddenly appeared, which of course has stopped all work, and the job is almost ready to be printed!! Now what??

Yes, the backups did work. I lost a week of work, but not the whole picture (whew!) No question the file ws corrupted, because I found two other psb files in the archives which did open. I think the corruption happened from letting the file stay open while the machine slept - trying to save the start-up time.. Never do that again. Thank you both. The solution was not the easy one, the no pain one I was hoping for, but it did work.

I was trying to upgrade my iPhone 45 to 5.0.1 OS and received an error, "could not update due to firmware file not compatible". I have Windows PC

No success upgrading iPhone to iOS 5.0.1. Received an error, "could not update due to firmware file not compatible". I have a Windows pc. Help??

Check that and also their is a windows update. Update and try again. email me if you have the same problem I'd be happy to keep helping you with this problem
< Email Edited By Host >

My latest attempt to import photos from my slr resulted in an error. Something to thew effect of file not compatible. never had this problem before.

My latest attempt at moving photos from my slr to iphoto resulted in an error, something to the effect of file not compatible. Never happened before. Made about six attempts...no change. any ideas?
Thanks

What system and iPhoto versions are you using? What camera model and are you shooting just jpegs or RAW or both?
See if you can launch Image Capture and get it to recognize your camera. If it does then download the photos to a folder on the Desktop to get them safely on the hard drive.
See if the files can be imported into iPhoto from that folder.
Reformat the memory card with your camera, take some test shots and try to import into iPhoto directly.
OT

When I try to update phone i get the message firmware file not compatible comes up when I go into my setteings on phone to update I can't find software option i checked in general settings it is not there,what can I do to get my iOS updated?

I am having trouble updating my iOS software on my phone, I keep getting the error message firmware file not compatible what do I do now?
Cindy

A second generation iPod touch can't be updated past 4.2.1.
(88824)

Get file not found error when I try to sync

I get file not found error when I try to sync Iphone.

SteveDVD,
The use of the .WMV was because that was part of the Library .EM template. I would not anticipate problems with other formats, so long as they are supported and the same for all of your Menus in the Project.
If you have done several Motion Menu Renderings, you might want to clear Encore's Media Cache, just in case it is still referencing previous Render files.
And yes, the re-Importation should yield the same result as Linking/re-Linking.
Unfortunately, I do not have CS4, so I can't test this for you. There do seem to be a few real Bugs in the various CS4 programs, and maybe this is one?
That "File Not Found" rings a bell in my feeble brain. Seems that there was a post on that, but I do not remember it being related to Motion Menus. Maybe search will yield something of use.
Good luck,
Hunt

"File not readable" error in CS6

I've opened the file, worked on the file, saved the file and suddenly I'm getting a "File not readable" error upon open. Running CS6. One file was saved out to CS5 compatible. Created another test file and it saved out and reopened without issue.
Mac Yosemite. Only update done between opening was an Adobe Flash Player, which really shouldn't affect this. I've also tried pulling the file again from my cloud account to see if it was corrupted on my desktop...same issue.
Anyone having this issue and know how to solve for it?

skredberry,
Are you saving to your own harddisk?
It is always recommended here to open/save your documents from/to your own harddisk, then copy to external media/servers/whatever as backup.
You may be lucky (for a while), but the chances of file corruption and other unpleasantnesses are immensely greater when you use anything but the harddisk.

File not found error from scheduler

Hi,
We have a scheduler file with .cfa extension in the cf scheduler which trigger some mails to certain recipients on execution.
At the bottom option fo the scheduled task, we have checked the option to 'save output to file' and has given the file
path. On direct execution of the given url, the file is executed successfully and mails are fired.
But while trying to execute the same via scheduler it is not firing the mails. On investigation of the output file,
found the error message 'File not found'.
Is it possible that the file get executed when directly browsing the url and shows 'file not found' error
while executing via cf scheduler?(CF 8 is used.)

To be more specific,
the url format given in the cf admin scheduler is like this:
"http://www.domainname.com/myfolder/myfile.cfa"
A file path to log the output is also given to publish.
If we copy the above url to a browser and execute, the file gets executed and mails are fired.
If we set the interval or run the scheduler from the administrator,mails are not sent.On examination of log file given in the scheduler section, it is
showing error '/myfolder/myfile.cfa' file not found.

File not Found error when synching Ipod

I have a fairly new Ipod and synced successfully for months, but now iTunes says it cant synch because of a "File not Found error" (no error number or other clues). I'm running the latest iTines and Ipod software, and I've reset USB drivers but still no luck. I cant reset the iPod itself becase I then got a "1418 error", which is why I then reset USB. I'm stuck, has anyone seen this before?
The Ipod itself plays fine and Itunes recgnises it OK, albeit very slowly, even thought I'm using USB 2.
One other piece of info; when this first happened, the sync must have first deleted the songs I no longer wanted, prior to unsuccesfully adding new ones. Those old songs show up on the iPod but are skipped when I try to play them.

Its on the same thread as this one ("connecting iPod nano (second Generation ) to Windows"). Scroll through the authors, you will find it.

File not found, Error= –43

Everytime i try to make a new project logic pro does not accept audiophiles i use from other project-folders (File not found, Error= -43).
Even with the newest logic-version (10.0.7) and also a new mac book pro (moving via migration assistant) it does not work.

Hi,
I have a 'file not found' problem with Logic Express. A while back I transferred all my Logic files to DVD to make room on the hard drive. It took 4 discs, saved alphabetically by song title. Now, I nearly always get the 'file-not'found' error message when I try to work on something. Sometimes when I click 'search' it finds the file, sometimes it doesn't. I'm confident that I didn't delete the files.
Wondering if 'search' would find the files if I transferred all the files from DVD to a single folder on an external drive. I don't use the 'search manually' option, because I'm not really sure what I'm looking for, or where to look. In the other room, perhaps? 'Computer challenged' is me. Any suggestions?
DS

File not found error when tried to open Document ID settings page

Hi
when i open sitesettings>site collection administratin >Document
ID settings
it shows
file not found error
adil

Hi,
first we need to figure out the error. change the web.config so that you can see the error on browser
1) Obtain the complete call stack instead of the default error page:
<SafeMode MaxControls="200" CallStack="false"/>
to
<SChangeafeMode MaxControls="200" CallStack="true"/>
2) CustomeErrors mode value (in the system.web section) is set to Off:
<customErrors mode="On">
to
<customErrors mode="Off">
Change these value in "c:\inetpub\wssroot" CA dirctory web.config and
C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\TEMPLATE\LAYOUTS\web.config .
now again try to do the action. you will get the error on screen.
Whenever you see a reply and if you think is helpful,Vote As Helpful! And whenever you see a reply being an answer to the question of the thread, click Mark As Answer

File not found error (404) from web browser

I installed 901 DB on different Oracle home and iAS 1.0.2.2 in a
different Oracle home. The ifsconfig went thru fine.
However I am unable to access the login page ( I executed
ifsapachesetup ). I tried to access
http://<machine>:<port>/servlet/files.
I see the following error in Jserv.log
ajp12: Servlet Error: NoClassDefFoundError:
oracle.ifs.protocols.dav.impl.IfsDavServlet
On the browser I get File not found error ( HTTP 404 )
Do I need to perform additional steps on Solaris machine ( apart
from executing apache setup script ).
Please help me.

Make sure you have started all the services:
- ifsjservctl -start
- ifslaunchdc
- ifslaunchnode
- ifsstartdomain
all are in the iFS bin directory.
Keith

FILE not found error: j2ee/home/applib/applications-mapping.xml (No such fi

Hi EveryBody
i have my applications-mapping.xml file already in the applib directory, but when i try to conect to a remote ejb i had this error[b]
FILE not found error: j2ee/home/applib/applications-mapping.xml (No such file or directory)
can anyone help??

gday
Is the error on the client or server?
What role in the application does applications-mapping.xml fulfill?
How are you loading the file in?
-steve-

File not found error when opening securedoc.html

We are having a sudden issue where recipients of our secure envelope emails will open a message from us with attachments and they will get a "File Not Found" error message.
We are still using a Post X appliance, but no config changes were made whatsoever and this started happening since last weekend. (Oct. 9-11)
I did reboot the Post X box and thought the problem was fixed w/ the reboot. I sent a secure message to myself and then opened it along with the attachment and all was good. I sent the second test and the problem was back; "File not found".
I have noticed that when I get file not found the address bar in my browser is pointing to: https://res.cisco.com/websafe/eo/error?error=notfound
The time after rebooting when it did work it pointed to file on my local computer hard drive:
file:///C:/Documents%20and%20Settings/mymachine/Local%20Settings/Temporary%20Internet%20Files/PXTemp/-6pAQ4_Y5hJEmKdQhtG8lhNx0zo!/PX_L_1255377132267.html
Any ideas what could have caused this sudden issue? How do we resolve? I have a call into support, but they have been researching it all day and our secure mail is down!

used bridge, didn't work.
tried right-click, double click..open in program.
same error.
files work in other adobe products.....
only way to get a jpg in there is to "paste" it in.

File Not Compatible Error - CS4

Similar Messages

Maybe you are looking for