File Path and Name field does not display correct path

We are using Crystal 2008 along with VS 2005. We embed the special "File Path and Name" field inside our report and it displays the correct path when viewed inside Crystal reports:
C:\Program Files\reports\Chart.rpt
When run through the web and viewed in the DHTML viewer, the file name and path appear as follows:
C:\Windows\TEMP\Chart {02152A43-3339-4C03-A50A-E281E1D391AF}.rpt
How can this be corrected?
Thanks in advance for any assistance.

This is a known issue tracked under ADAPT0000962216. At this time I do not know when this will be resolved, however Service Pack 2 for CR 2008 is targeted to be released by September and this may contain the fix.
Ludek

Similar Messages

I just upgraded to Mavericks and suddenly youtube does not display correctly although other sites work fine. I am using the newest MacBook Air. Any suggestions?

I just upgraded to Mavericks and suddenly youtube does not display correctly although other sites work fine. I am using the newest MacBook Air. Any suggestions?

Hi ..
Open System Preferences > Flash Player then select the Advanced tab.
Click Delete All under Browsing Data and Settings
Back to Safari. Press Command + Option + E to empty the Safari cache.
Quit and relaunch Safari, try a video.

"File Path and Name" field not displaying correctly

Post Author: DaveWoo
CA Forum: General
Hello,Here's my situation: I'm currently upgrading from Crystal Reports for Visual Studio .NET 2003 to Crystal Reports for Visual Studio 2005. I have several reports (programmatically generated using VB.NET) that use the "File Path and Name" special field. Now, in the old version of Crystal Reports (2003), the field properly displayed the original file path and name; however, in the new version (2005), the field displays as "C:\DOCUME1\Username\LOCALS1\Temp\Filename{F2459406-3719-4C8B-917C-4A7055A18C76}.tmp" - in other words, the location of the temporary .rpt file.How do I get the "File Path and Name" field to correctly display the path & name of the original file, like it did in the prior version?- Dave

This is a known issue tracked under ADAPT0000962216. At this time I do not know when this will be resolved, however Service Pack 2 for CR 2008 is targeted to be released by September and this may contain the fix.
Ludek

When I burn a disc from a playlist in iTunes, the track names and artist info does not display on the disc when friends view/listen to it. This probably is an easy fix, but I need some advice.

When I burn a disc from a playlist in iTunes on my MacBook, the track names and artist info does not display on the disc when friends view/listen to it. This probably is an easy fix, but I need some advice.

No, this standard has been implemented for several decades.
How iTunes remembers audio CDs - http://support.apple.com/kb/TA27785
It is just conceivable you burned a CD that exactly matched one already in the Gracenote database. Gracenote uses track count and duration to decide what CD it is you have in a computer. If you have one that matches that it will label it. You could conceivably even have one that matches it that is not the correct one.
This script will only work on Macs:
http://dougscripts.com/itunes/scripts/ss.php?sp=cdtexttocdinfo - script to use CD-text file on CD to label CD in iTunes

Path and Name field in SPD 2010 Workflow for creating Doc Sets

Hi Guys,
Here's hoping you can help out and give a few pointers. I'm currently trying to implement what I thought was quite a simple workflow involving the creation of a Content Type (similar to Doc Set but with additional field) within an alternative library when
a new item is added to the current library.
Create Item in CaseFileLibrary (Output to Variable: CaseFile)
When running the workflow, I keep getting the following error:
"The workflow could not create the list item because the file name is either missing or invalid. "
It seems to be related to the 'File and Path' field within the 'Create New List Item' field mappings. For this I have tried the CurrentItem:Title as some other forums suggest and have also tried entering the URL path e.g. /subsite_name/library_name/CurrentItem:Title.
(as the name of the CaseFile (Doc Set) is going to be the same as the current item name)
If anyone has any suggestions, I would be truely greatful.
Luke

Hi Luke,
This error indicates there is an error in the workflow logic. Ensure that the file name entered in the Path and Name field is a valid file name. Common reasons for a file name to be invalid include a missing or incorrect file extension or a file/path string
that is too long and exceeds the allowable number of characters.
More information, please refer to :
Common error messages in SharePoint workflow development
For the URL that you used in the ‘Create New List Item’, whether the CurrentItem:Title is a lookup, not typed by yourself. If not, please type /subsite_name/library_name/, then lookup CurrentItem:Title, like the below, then save and publish the workflow,
compare the result.
In addition, please use another name for the name, compare the result.
Best Regards,
Wendy
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Wendy Li
TechNet Community Support

Mac computers - FF 29.0 and 30.0 does not display the video layer in the Revolution Slider section of WordPress site. Why?

Mac computers - FF 29.0 and 30.0 does not display the video layer in the Revolution Slider section of WordPress site. Why?
We prepared simple Word Press web site. We used a Revolution slider plugin with HTML5 video layer. It works properly on Chrome, Safari, older Mozilla FF.
But we had a problem on PC computers with FF 29.0 30.0 – after reinstall of browser everthing seems to be OK. The slider works. Unfortunately even the reinstallation on Mac computers does not help. There is no visible video on Mac FF 30.0.
We are looking for some information what we can do to solve this problem. Could you help?

Can you play the video on YouTube?
*http://www.youtube.com/watch?v=Ugh2YvHU7D0#t=58
Note that Mac lacks support to play MP4 files natively without using a Flash player.

Product Revenue Bookings and Backlog Dashboard does not display any data

Product Revenue Bookings and Backlog Dashboard does not display any data even though the load completed successfully.
They are able to see just the parameters.
Not sure if the upgrade of the database from 9.2.0.6 to 10.2.0.3 is a factor.
What can I check?
Is there some table to verify that the data exists for display in the Product Revenue Bookings and Backlog Dashboard?
Screenshot is at:
https://gtcr.oracle.com/gtcr-dir/gtcr_5637/6415786.993/Product_Revenue_Bookings_Backlog_Dashboard.doc
Support suggested to create a new request set and run the initial load with load all summaries option; but there was no change in the Product Revenue Bookings and Backlog Dashboard.
Any ideas?

hi
We have faced the similar problem after the upgrade to 10G
What we did was
Ran the initial load of time dimension, Item setup request set, and the request set of all the dash board in the clear and initial load mode..
we were able to get the data once the clear and load is completed successfully
Regards
Ramesh Kumar S

I installed the latest version of iTunes (10.6.3.25) on a new Windows 7 PC. I can see ahred libraries on Shared but can't import as the line containing the Settings and Import buttons does not display. Any suggestions?

To move the iTunes library to this new computer I switched on Home Sharing and can see the other libraries on my home network. If I select tracks from a Shared library I can't import them as the strip containing "Show: All Items" and the "Settings" and "Import" buttons, does not display at the bottom of the screen. Goes straight from the list of tracks to the strip with Playlist icons and xxxx items, tttttt total time, yyyy GB.
Any suggestions for making the Import button appear?

I hvae the EXACT same issue
I built a new computer which is EXTREMELY fast overclocked i7 ect and.. ITUNES DOESNT WORK
I click on itunes which ive uninstalled and reinstalled and reset the winsock AND seen if there were any errors AAAAAAND ive check the Hkey to make sure bonjur was the only one in there which it is and all that happens is my cpu goes to 25% and i cant do anything except go into the task manager and close it! ANYTHING with itunes (everything else is premium speed).
what do i do
windows 7 64 bit

I do not manage to find the function to change a letter into exposing. I have MUSE DC 2014.2 and the menu does not display this possibility. I tried to import it IN design but that does not function either?

I do not manage to find the function to change a letter into exposing. I have MUSE DC 2014.2 and the menu does not display this possibility. I tried to import it IN design but that does not function either?

I'm not clear on exactly what it is you're asking, but if you're referring to changing opacity, you can change the opacity setting for the States of a menu item via the States panel and Control Strip.

RE: my input fields does not display when running the page

my input fields does not display when running the page
why is that so?

Hi,
Can you send the HTML code for us?
Afonso

Oops - spry menu bar 2.0 does not display correctly when loaded

Oops - obviously I'm new at this. I think I got my graphics loaded now.
Dear Sirs:
I notice bzz31 had a pretty complicated post, so perhaps someone can help me with my complicated problem that has been vexing me for months. I tried the Spry Menu Bar 1.0, but it was impossible for me to edit, and I was delighted to see Spry Menu Bar 2.0 come out. However the 2.0 version has been frustrating me as well.
I can get my menu bar to display properly in Live View, as shown below.
However when I load everything onto the server, the menu bar does not display correctly, as shown below:
I don't quite understand the code "file:///" but I interpret it to mean that the Spry-UI-1.7 folder is in the topmost folder of MacPro5-Docs, which is my hard drive. Here's the code I'm having trouble with:
Here's my computer directory, shown below:
Since my index file is two folders down from Spry-UI-1.7, I loaded the files onto the server similarly, as shown in the next three pictures:
(The picture below is the same as the one just above, but now you can see the path from index to Spry-UI-1.7.)
I would be most appreciative if someone can help me.
Thank you.

Have a look at the following links
<script src="file:///MacProG5-Docs/Spry-UI-1.7/includes/SpryDOMUtils.js" type="text/javascript"></script>
<script src="file:///MacProG5-Docs/Spry-UI-1.7/includes/SpryDOMEffects.js" type="text/javascript"></script>
<script src="file:///MacProG5-Docs/Spry-UI-1.7/includes/SpryWidget.js" type="text/javascript"></script>
<script src="file:///MacProG5-Docs/Spry-UI-1.7/includes/SpryMenu.js" type="text/javascript"></script>
<script src="file:///MacProG5-Docs/Spry-UI-1.7/includes/plugins/MenuBar2/SpryMenuBarKeyNavigationPlugin.js" type="text/javascript"></script>
<script src="file:///MacProG5-Docs/Spry-UI-1.7/includes/plugins/MenuBar2/SpryMenuBarIEWorkaroundsPlugin.js" type="text/javascript"></script>
<link href="file:///MacProG5-Docs/Spry-UI-1.7/css/Menu/basic/SpryMenuBasic.css" rel="stylesheet" type="text/css" />
Each of the above points to a file on your local system and cannot be found by the remote server.
Replace the red coloured parts with http://www.twhsbands.org/ will remedy the situation.
You also have some remnants of the other SpryMenuBar that should be removed from your markup.
Gramps
Wel, so much for the red coloured parts, they did not show up.
The red coloured parts read file:///MacProG5-Docs/

Aligned Form Fields Do Not Display Correctly Where Visible Borders Overlap?

I'm on creating some forms & checklists for the company I work for to simplify our project workflow. When adding text fields to the form I'd like to add borders to segregate the various fields & make the form more presentable.
The problem I'm having, is that I'm unable to place fields immediately adjacent one another without leaving a gap. If I do & use the snap to grid option, aligning the top of one field with bottom of another, it does not display correctly when printed. The border lines appear to have differing thicknesses where they touch & this makes the form look terrible. Currently I'm having to create the borders in an excel spreadsheet, convert to pdf & add borderless fields within the pre printed borders. While this gives me the look i want, if I later want to add to or amend the form I have to start from scratch first modifying the initial excel layout which is too time consuming. I'm using Acrobat X Pro. Any assistance appreciated.
Regards
John

There are at least two techniques to allow you to change the underlying layout and remake the static part of the PDF, without having to redo the form fields (except new ones, and moving as needed).
That is replace pages and copy-paste of form fields.

Main Viewer Window does not display correctly

Ever since I upgraded to Aperture 3.3 through 3.4.1, the main viewer window does not display correctly. Everything is justified to the right of the screen. When viewing images, the are not in teh center, they are over to the right. I can't even see the import controls when trying to import... actually I can't even press the import button or add metada. I am really in a bad position here. Need help with this... anyone out there have a solution please? my clients are waiting for their photos. Yikes!
Right justified?
No Import Controls?
Faces - Everything displayed in a single row, runs off the end of the right side of the screen

Have a read through this page and follow the directions to delete your application preferences,
Let us know how you go.
Tony
http://support.apple.com/kb/HT3805
Message was edited by: Tony Gay

VirtualBox Description Field Does Not Display

The VirtualBox description field does not show up any more. Here is what it looks like
It happened right after I was modifying a description at the same time I was shutting down that same guest machine. I got a message asking me to save one thing or discard it and save something else, I chose to save the machine information and discard my entry into the description field. Now, no machines display a description.
I can see the description if I click on it.
To fix this, I even tried uninstalling and re-installing VirtualBox.
Any ideas on how to fix this?

You may want to provide information about what primary OS and which version of VirtualBox you are using.
Perhaps you have renamed the Virtual machine folder. I suggest to locate the directory on your computer and edit the machine name of your Guest OS accordingly.

Dragging and dropping an item within horizontalList does not display correctly

It appears that when I drag an item from a HorizontalList to another location within the same HorizonList, it does not display the images correctly. In my HorizontalList, I have an itemRenderer that shows the thumbnail image of the item. I have about half a dozen items in the list and when I drag the sixth item and move to the beginning of the list, the display looks as if the first and the sixth element are switched, while in reality the resulting dataProvider array seems to have the right order, meaning the sixth element became the first element and the first element became the second element and so on. Has any one seen such a behavior and how do I rectify this? Thanks in advance. Cheers, Ramesh
The HorizontalList def is
<mx:HorizontalList id="myList" width="92%" height="100%" columnWidth="90" rowHeight="105" rollOverColor="#f26722"
                    itemRenderer="com.myListRenderer" labelField="name" dataProvider="{arr}" columnCount="10"
                    click="updateView(event)" dragEnabled="true" dropEnabled="true" dragMoveEnabled="true" >
</mx:HorizontalList>
The renderer code is
<?xml version="1.0" encoding="utf-8"?>
<mx:VBox xmlns:mx="http://www.adobe.com/2006/mxml" horizontalScrollPolicy="off" verticalScrollPolicy="off" horizontalAlign="center"
        verticalAlign="middle" width="90" height="90" verticalGap="0" creationComplete="init()" >
<mx:Script>
    <![CDATA[
        private function init():void {
            imageFile.source = data.url;
            imageName.text = data.name;
    ]]>
</mx:Script>
    <mx:Image id="imageFile" scaleContent="true" width="90" height="70" horizontalAlign="center" verticalAlign="middle"/>
    <mx:Label id="imageName" height="18" width="90" textAlign="left"/>
</mx:VBox>

Hi Alex,
In your blogpost on itemRenderers, you discussed something relevant in a brief section on "Background color changes when data changes". However, I could not find any reference for use on dataChange event handler. Can you pelase point me to the right article?
Implementing dataChange event instead of creationComplete did not solve my issue. I still had the issue. Thanks, Ramesh

File Path and Name field does not display correct path

Similar Messages

Maybe you are looking for