File Read and Write using File Adapter in Bpel

In Bpel Process i am using File Adapter ( Schema is Opaque) for read and write the file contents. i am able do successful deployment and read, write function in first time deployment, after that again i tired to run the application, its not going to write the content of file, its only writing the file with out data's or content in that file.
Please help me...
Saravanan

Hi Eric
In my domain.log file having the following details. In this file im unable to find out what the exact problem. Please look at this and help me.
<2008-01-22 18:25:42,024> <INFO> <default.collaxa.cube.compiler> validating "C:\product\10.1.3.1\OracleAS_1\bpel\domains\default\tmp\.bpel_BPELProcess2_1.1_298e83988d77b6640c33dfeec11ed31b.tmp\BPELProcess2.bpel" ...
<2008-01-22 18:25:49,850> <INFO> <default.collaxa.cube.engine.deployment> <CubeProcessFactory::generateProcessClass>
Process "BPELProcess2" (revision "1.1") successfully compiled.
<2008-01-22 18:25:49,914> <INFO> <default.collaxa.cube.activation> <AdapterFramework::Inbound> Loading JCAActivationAgent for {portType=Read_ptt}
<2008-01-22 18:25:49,914> <INFO> <default.collaxa.cube.activation> <AdapterFramework::Inbound> JCAActivationAgent::load - Locating Adapter Framework instance: OraBPEL
<2008-01-22 18:25:49,930> <INFO> <default.collaxa.cube.activation> <AdapterFramework::Inbound> JCAActivationAgent::load - Done loading JCAActivationAgent for processId='bpel://localhost/default/BPELProcess2~1.1/
<2008-01-22 18:25:49,930> <INFO> <default.collaxa.cube.engine.deployment> Process "BPELProcess2" (revision "1.1") successfully loaded.
<2008-01-22 18:26:02,698> <INFO> <default.collaxa.cube.activation> <AdapterFramework::Inbound> JCAActivationAgent::uninit Shutting down the JCA activation agent, processId='bpel://localhost/default/BPELProcess2~1.0/', activation properties={portType=Read_ptt}
<2008-01-22 18:26:02,698> <INFO> <default.collaxa.cube.activation> <AdapterFramework::Inbound> Adapter Framework instance: OraBPEL - performing endpointDeactivation for portType=Read_ptt, operation=Read
<2008-01-22 18:26:02,698> <INFO> <default.collaxa.cube.ws> <File Adapter::Outbound> Endpoint De-activation called in adapter for endpoint : D:\MAXIMUS_Project_Softwares\jdevstudiobase10132\jdev\mywork\MyLabs\BPELProcess2\in
<2008-01-22 18:26:02,698> <INFO> <default.collaxa.cube.activation> <AdapterFramework::Inbound> JCAActivationAgent::init - Initializing the JCA activation agent, processId='bpel://localhost/default/BPELProcess2~1.1/
<2008-01-22 18:26:02,698> <INFO> <default.collaxa.cube.activation> <AdapterFramework::Inbound> JCAActivationAgent::initiateInboundJcaEndpoint - Creating and initializing inbound JCA endpoint for:
process='bpel://localhost/default/BPELProcess2~1.1/'
domain='default'
WSDL location='rd.wsdl'
portType='Read_ptt'
operation='Read'
activation properties={portType=Read_ptt}
<2008-01-22 18:26:02,698> <INFO> <default.collaxa.cube.activation> <AdapterFramework::Inbound> Adapter Framework instance: OraBPEL - endpointActivation for portType=Read_ptt, operation=Read
<2008-01-22 18:26:02,730> <INFO> <default.collaxa.cube.activation> <File Adapter::Inbound> Endpoint Activation called in File Adapter for endpoint: D:\MAXIMUS_Project_Softwares\jdevstudiobase10132\jdev\mywork\MyLabs\BPELProcess2\in
<2008-01-22 18:26:02,730> <INFO> <default.collaxa.cube.activation> <AdapterFramework::Inbound> Adapter Framework instance: OraBPEL - successfully completed endpointActivation for portType=Read_ptt, operation=Read
<2008-01-22 18:26:02,890> <WARN> <default.collaxa.cube.activation> <File Adapter::Inbound> PollWork::run exiting, Worker thread will die
<2008-01-22 18:26:04,171> <INFO> <default.collaxa.cube.ws> <File Adapter::Outbound> Managed Connection Created
<2008-01-22 18:26:04,171> <INFO> <default.collaxa.cube.ws> <File Adapter::Outbound> Connection Created
<2008-01-22 18:26:04,171> <INFO> <default.collaxa.cube.ws> <File Adapter::Outbound> FileInteraction Created

Similar Messages

  • File read and write operations

    how do use file read and write operations?
    can anyone give simple program?

    http://www.tutorialspoint.com/cplusplus/cpp_files_streams.htm
    http://www.cplusplus.com/doc/tutorial/files/
    check this
    and with mfc
    http://www.functionx.com/visualc/fileprocessing/serialization.htm
    https://msdn.microsoft.com/en-us/library/6337eske.aspx
    http://www.informit.com/library/content.aspx?b=Visual_C_PlusPlus&seqNum=90

  • I'm trying to share folder between users on a single mac.  I put the folder in "shared," set permissions so other user can read and write, enabled file sharing, but can't find the folder on the second user's account.  Any help?

    I'm trying to share a folder between users on a single mac.  I want both users to be able to read and write so the folder stays current on both accounts.  I put the folder in "shared," set permissions on folder so other user can read and write, enabled file sharing, but can't find the folder on the second user's account.  Any help?

    Did you log out of one account and into the other or just used Fast user switching?
    Is the permissions set to anyone?
    When you move data to teh Shared folder is it copied or just moved?
    If copied then it's not a folder both can access, just a way station like a USB thumb drive that things are coped too and off of likely.
    You can run this #5 on each user account to reset the user permissions once they are taken back out of the Shared folder
    Step by Step to fix your Mac

  • File Read and write in Flex

    hi,
    can any one tell me how to read and write a file using
    actionscript in flex2
    regards,
    Shah Mohamed

    Hi all,
    I have tried read and write file using AIR inturn in Flex 3
    .I can able to compile it with no errors. But while i try to run
    ,it throw an error .and the stack trace of the error is below.. Im
    in showstopper stage. kindly update me with your suggesstions .
    Expecting the reply..
    Thanks in advance
    VerifyError: Error #1014: Class flash.filesystem::FileStream
    could not
    be found.
    at [newclass]
    at
    global$init()[D:\dev\nexxus\metasoft\iGallery;com\metasoft\flex\util;MetasoftUtils.as:8]
    at
    com.metasoft.flex.server::MetasoftServer/getUserInfo()[D:\dev\nexxus\metasoft\iGallery;co m\metasoft\flex\server;MetasoftServer.as:146]
    at
    com.metasoft.flex.server::MetasoftServer/isValidUser()[D:\dev\nexxus\metasoft\iGallery;co m\metasoft\flex\server;MetasoftServer.as:17]
    at
    components::Login/components:Login::login()[D:\dev\nexxus\metasoft\iGallery;components;Lo gin.mxml:14]
    at
    components::Login/__loginButton_click()[D:\dev\nexxus\metasoft\iGallery;components;Login. mxml:102]
    at [mouseEvent]
    regards,
    Shah Mohamed.N

  • How do I migrate files created in a Windows OS to a new external drive that is formatted as a MAC drive. I want to read and write these files back to the new drive.

    How do I migrate files from an external hard drive created in a Windows OS to a new MAC external drive? I want to read and write these files to the new drive.

    LKrzesowski wrote:
    How do I migrate files from an external hard drive created in a Windows OS to a new MAC external drive? I want to read and write these files to the new drive.
    If all you're trying to do is move the files from the Windows external to the Mac external, you can simply connect them both to the Mac and drag the files from the Windows drive to the Mac drive. If you want to move the files back and forth between them, you'll need to establish the format of the Windows external. Macs can read and write to FAT32 and exFAT (which can handle files larger than 4GB) formatted drives but can only read NTFS formatted drives without additional software. With the Windows drive connected, you can check its format with Disk Utility.

  • How to read and write Xml file at client side using JavaScript !

    Hello,
    i am new to javascript.
    I have requirement to read and update XML file at client side.
    Will you please guide what could be the best way to read and update XMl file using javascript.
    Thanks,
    Zuned

    This is a Java forum,not a Javascript forum. Maybe you should ask here [http://www.webdeveloper.com/forum/forumdisplay.php?forumid=3&s|http://www.webdeveloper.com/forum/forumdisplay.php?forumid=3&s].

  • How to read and write(a file .txt) from a URLConnection

    I try to read and write on one URLConnection. Is it possible ? How can i make it ?
    The reading part of my application work's but not the writting part
    That's a part of rhe code that i use to write :
    String Line = "Hi";
    MyUrl = new URL(this.getCodeBase(), FichierEvenement) ;
    Con = MyUrl.openConnection() ;
    Con.setDoOutput(true);
    Con.setDoInput(true);
    Con.setUseCaches(false);
    Dos = new DataOutputStream(new BufferedOutputStream(Con.getOutputStream( )));
    Dos.writeUTF(Line);
    Please help me :)

    What are you doing with the bytes written to the OutputStream? This info would help, but i do have a suggestion. I ran into this problem when trying to write strings using writeUTF. The output was all screwed up. So, maybe change your string to a character array. That way Unicode is displayed properly. This in conjunction with writing to an .html file instead of to the connection itself might work.

  • How to read and write to file on server

    can any body tell how to read or write to a file on server, like where do i keep the file and what does the path look like......on server
    stand alone i am reading and writing into file but when it comes to server i am confused how it works...i mean the path
    thank you

    The Path needs to be absolute:
    For example in Unix it would look like:
    /usr/paz/Test.txtIn Windows it would look like:
    C:/Paz/Test.txtHope this helps.
    Thanks and regards,
    Pazhanikanthan. P

  • Need help to read and write using UTF-16LE

    Hello,
    I am in need of yr help.
    In my application i am using UTF-16LE to export and import the data when i am doing immediate.
    And sometimes i need to do the import in an scheduled formate..i.e the export and imort will happend in the specified time.
    But in my application when i am doing scheduled import, they used the URL class to build the URL for that file and copy the data to one temp file to do the event later.
    The importing file is in UTF-16LE formate and i need to write the code for that encoding formate.
    The problem is when i am doing scheduled import i need to copy the data of the file into one temp place and they doing the import.
    When copying the data from one file to the temp i cant use the UTF-16LE encoding into the URL .And if i get the path from the URl and creating the reader and writer its giving the FileNotFound exception.
    Here is the excisting code,
    protected void copyFile(String rootURL, String fileName) {
    URL url = null;
    try {
    url = new URL(rootURL);
    } catch(java.net.MalformedURLException ex) {
    if(url != null) {
    BufferedWriter out = null;
    BufferedReader in = null;
    try {
    out = new BufferedWriter(new FileWriter(fileName));
    in = new BufferedReader(new InputStreamReader(url.openStream()));
    String line;
    do {
    line = in.readLine();
    if(line != null) {
    out.write(line, 0, line.length());
    out.newLine();
    } while(line != null);
    in.close();
    out.close();
    } catch(Exception ex) {
    Here String rootURL is the real file name from where i have to get the data and its UTF-16LE formate.And String fileName is the tem filename and it logical one.
    I think i tried to describe the problem.
    Plz anyone help me.
    Thanks in advance.

    Hello,
    thanks for yr reply...
    I did the as per yr words using StreamWriter but the problem is i need a temp file name to create writer to write into that.
    but its an logical one and its not in real so if i create Streamwriten in that its through FileNotFound exception.
    The only problem is the existing code build using URL and i can change all the lines and its very difficult because its vast amount of data.
    Is anyother way to solve this issue?
    Once again thanks..

  • Urgent: Please help. how to solve the time delay during buffer read and write using vc++

    I need to continuously acquire data from daqmx card, write into a file and at the same time corelate (in terms of time) the data with signals from other instruments. The current problem is that there is time delay during read and write data into buffer,thus causing misalignment of the data from multiple instruments. Is there a way to solve  the delay? or Is there a way to mark the time of the data acquisition in the buffer?  If I know the starting time (e.g. 0) of data acquisition and sampling rate (e.g. 1kHz), can I simply add 1ms to each data sample in the buffer? The current code is shown below.
    void DataCollectionWin::ConnectDAQ()
    DAQmxErrChk(DAQmxCreateTask ("", &taskHandle));
        DAQmxErrChk(DAQmxCreateAIVoltageChan(taskHandle,"Dev1/ai0,Dev1/ai1,Dev1/ai2,Dev1/ai3,Dev1/ai4,Dev1/ai5,Dev1/ai16,Dev1/ai17,Dev1/ai18,Dev1/ai19,Dev1/ai20,Dev1/ai21,Dev1/ai6,Dev1/ai7,Dev1/ai22","",DAQmx_Val_Cfg_Default,-10.0,10.0,DAQmx_Val_Volts,NULL));
      DAQmxErrChk(DAQmxCfgSampClkTiming(taskHandle,"",1000.0,DAQmx_Val_Rising,DAQmx_Val_ContSamps,60000));
      DAQmxErrChk (DAQmxRegisterEveryNSamplesEvent(taskHandle,DAQmx_Val_Acquired_Into_Buffer,50,0,EveryNCallback,NULL));// Every 50 samples the EveryNSamplesEvent will be trigured, to reduce time delay.
      DAQmxErrChk (DAQmxRegisterDoneEvent(taskHandle,0,DoneCallback,NULL));
      DAQmxErrChk (DAQmxStartTask(taskHandle));
    int32 CVICALLBACK EveryNCallback(TaskHandle taskHandle, int32 everyNsamplesEventType, uInt32 nSamples, void *callbackData)
     DAQmxErrChk (DAQmxReadAnalogF64(taskHandle,50,10.0,DAQmx_Val_GroupByScanNumber,data,50*15,&read,NULL));
       //memcpy(l_data,data,6000);
      SetEvent(hEvent);
    l_usstatus_e[0]=g_usstatus[0];// signals from other instruments that need to be corelated with the data from daq cards.
     l_optstatus_e[0]=g_optstatus[0];
     if( read>0 ) // write data into file
       //indicator=1;
     for (i=0;i<read;i++)
     {  //fprintf(datafile,"%d\t",i);
      fprintf(datafile,"%c\t",l_usstatus_s[0]);
      fprintf(datafile,"%c\t",l_usstatus_e[0]);
            fprintf(datafile,"%c\t",l_optstatus_s[0]);
      fprintf(datafile,"%c\t",l_optstatus_e[0]);
              fprintf(datafile,"%.2f\t",data[15*i]);
     //   sprintf( pszTemp, "%f", data[6*i]);
     // pListCtrl->SetItemText(0, 2, pszTemp);
        //pWnd->m_trackinglist.SetItemText(0, 2, pszTemp);
         fprintf(datafile,"%.2f\t",data[15*i+1]);
         fprintf(datafile,"%.2f\t",data[15*i+2]);

    Hello kgy,
    It is a bit of a judgment call. You should just choose the board that you think has the most to do with your issue. For example, this issue was much more focused on setting up your data acquisition task than the Measurement Studio environment/tools, so the MultifunctionDAQ board would have been the best place for it. As for moving your post to another board, I do not believe that is possible.
    Regards,
    Dan King

  • Java Applet: choose, read and write local file

    Can some body please help in writing a Java Applet with the following features:
    1. FileChooser button to select a local text file
    2. Load button
    3. Read the file line by line, process it and write into a text file.

    AnilK wrote: Thank you very much.
    Those are just empty words. You can show your thanks in ways that are more useful both to me and you.
    To better show your thanks you might..
    1) Stop treating me as though I were your servant. In a conversation, you might ask a question that I try to answer. As part of my answer, I might need to ask you some questions. A question is a sentence followed by '?'. I did ask you some questions. There are four questions I asked in my first reply. Please answer my questions so I can provide you the best advice.
    2) Do not ignore things I say. (see below*)
    AnilK wrote: However, I still have a problem where the applet can not write a local text file.
    * That is probably because you ignored what I mentioned about digitally signing the applet. If you do not understand anything I write, please do a search and if that does not help you to understand it, ask me what I mean.
    AnilK wrote: Can some body please help me out.
    I was happy to help, but my enthusiasm is dropping quickly. Unless you can manage to improve your replies, I will not help further.
    I will supply some more tips before I finish this message and wait to see your reply, to decide whether I will help further.
    1) If you use 'code' delimiters, the Java code will be colored nicely for people to read. Here is an example (e.g.).
    } catch (Exception e) {
    ret = "problem found. Please reload.";
    return ret;
    2) I had a point here about indenting code, but when I went to reply, the code was indented, which makes me think that using code delimiters would also fix the problem where the code looks as if it has no indentation.
    3) It is 'best practice' (unless you are an expert and can justify otherwise) to dump every stacktrace to find out what really happened. e.g.
      } catch (Exception e) {
        // Very important!  Find out why it failed!
        e.printStackTrace();
        // now go on to do the other things..
        ret = "problem found. Please reload.";
      return ret;
    } 4) When you get a stacktrace, copy/paste at least the first few lines into the message. If my guess about the cause of the problem is correct, the word 'security' will appear somewhere in the stacktrace.
    5) To encourage people to help, post compilable examples, rather than code snippets.
    <http://homepage1.nifty.com/algafield/sscce.html>
    By the way - congratulations on getting as far as you have. You have surprised me that you got so far already. Improve on the other things I mentioned, and I would be happy to help further.

  • Read and Write Excel File

    Hi all. I need your need help. I need to know how to read EXCEL FILE and insert it to a certain table. By the way, can anyone tell me how to write to a EXCEL FILE?
    Thank you in advance.

    READING EXCEL
    There are several options how to read excel file - ODBC, on a fly excel-->CSV conversion (if you have 11.2 and want to use external tables preprocessor), ... I put (I think all) options on my BLOG http://jiri.wordpress.com/2010/01/04/load-ms-excel-file-to-oracle-database/
    WRITING TO EXCEL
    Writing to excel is tricky because there is no direct way from Oracle, here are few tips
    1. JAVA - you can create java stored procedure, I did not test this but it's probably doable http://www.java-tips.org/other-api-tips/jexcel/how-to-create-an-excel-file.html
    2. Excel XML format - you can use UTL_FILE and write to XML format Excel can read http://blogs.msdn.com/b/brian_jones/archive/2005/06/27/433152.aspx
    3. Excel can also read CSV files, but it's plan text file with no formatting. You can use UTL_FILE to easily create CSV (comma separated) file and read it from excel, I have few samples on my blog http://jiri.wordpress.com/2009/03/18/oracle-fast-parallel-data-unload-into-ascii-files/

  • How to read and write a file in unicode?

    Hello!
    I have a problem with reading and writing files which are saved in unicode. with my current code I get strange boxes in my text
    Do you need a special Reader/Writer for this?
    Please, help me if you have any ideas.
    cheers
    import java.io.*;
    import java.util.*;
    public class StreamConverter {
       static void writeOutput(String str) {
           try {
               FileOutputStream fos = new FileOutputStream("test_uni.txt");
               Writer out = new OutputStreamWriter(fos, "UTF8");
               out.write(str);
               out.close();
           } catch (IOException e) {
               e.printStackTrace();
       static String readInput() {
          StringBuffer buffer = new StringBuffer();
          try {
              FileInputStream fis = new FileInputStream("file_uni.txt");
              InputStreamReader isr = new InputStreamReader(fis, "UTF8");
              Reader in = new BufferedReader(isr);
              int ch;
              while ((ch = in.read()) > -1) {
                 buffer.append((char)ch);
              in.close();
              return buffer.toString();
          } catch (IOException e) {
              e.printStackTrace();
              return null;
       public static void main(String[] args) {
            String inputString = readInput();
            writeOutput(inputString);     
    }

    Are you saying there's only the three boxes at the beginning, and the rest of the text is okay? That sounds like a Byte Order Mark (BOM). The BOM is optional for UTF-8, but Java's I/O classes act like it's forbidden. They should check for it when reading so they can skip over it, but (for now, at least) we have to do that ourselves.
    All you have to do is read the first three bytes from the InputStream and compare them to the BOM. If they match, you start reading the text from that position; otherwise you reset the InputStream and start reading from the beginning.
    http://en.wikipedia.org/wiki/Byte_Order_Mark

  • I have an excel file,i want to read and write this file to xml

    hello,
    i have an excel file,i want to read excel data and write to xml file .i also have an exisitng xml file and i want to appened the excel data to the exisiting xml.please give some example code.
    thanks

    GoOgLe

  • Problem During reading and write local file

    Hi ,
    I had written a small applet program, it have function �readNwriteFile()� it read/write the local file
    This function works fine when I call it from start () function.
    But whenever I was trying to call this function from java script it gave me this exception.
    �java.security.AccessControlException: access denied (java.io.FilePermission C:\temp_jar\DSC01692.JPG read)�.
    Java script is working fine, I can access any another function from script The problem is some related to access
    I had set the permission in my policy file .this the permission that I had set.
    grant codebase "file:c:\temp_jar"{
    permission java.io.FilePermission "<< ALLFILES >> , "read ,write ,delete ,execute ";
    Java code.
    package com.ravindra;
    import javax.swing.*;
    import java.awt.*;
    import java.io.*;
    import java.util.*;
    public class MialTest extends JApplet{
         public void init() {
         public void start(){
              readNwriteFile(); /// When I call this function from here It is working
         public byte [] readNwriteFile(){
              try {
                   File localfile = null;
                   localfile = new File("C:\\temp_jar\\DSC01692.JPG");
                   FileInputStream fs = new FileInputStream(localfile);
                   ByteArrayOutputStream bs = new ByteArrayOutputStream() ;
                   int actual_data = (int)fs.read();
                   while(actual_data > -1){
                        bs.write(actual_data);
                        actual_data = (int)fs.read();
                   byte [] final_data = bs.toByteArray();
                   File out_file = new File("C:\\temp_jar\\Ravindra_test.JPG");
                   FileOutputStream out_stream = new FileOutputStream(out_file);
                   out_stream.write(final_data);
                   out_stream.flush();
                   fs.close();
                   bs.close();
                   localfile = null;fs = null; bs = null;
                   return final_data;
              } catch (Exception e) {
                   // TODO Auto-generated catch block
                   e.printStackTrace();
                   return null;
    Java Script Code:

    Hi ,
    I had written a small applet program, it have function �readNwriteFile()� it read/write the local file
    This function works fine when I call it from start () function.
    But whenever I was trying to call this function from java script it gave me this exception.
    �java.security.AccessControlException: access denied (java.io.FilePermission C:\temp_jar\DSC01692.JPG read)�.
    Java script is working fine, I can access any another function from script The problem is some related to access
    I had set the permission in my policy file .this the permission that I had set.
    grant codebase "file:c:\temp_jar"{
    permission java.io.FilePermission "<< ALLFILES >> , "read ,write ,delete ,execute ";
    Java code.
    package com.ravindra;
    import javax.swing.*;
    import java.awt.*;
    import java.io.*;
    import java.util.*;
    public class MialTest extends JApplet{
         public void init() {
         public void start(){
              readNwriteFile(); /// When I call this function from here It is working
         public byte [] readNwriteFile(){
              try {
                   File localfile = null;
                   localfile = new File("C:\\temp_jar\\DSC01692.JPG");
                   FileInputStream fs = new FileInputStream(localfile);
                   ByteArrayOutputStream bs = new ByteArrayOutputStream() ;
                   int actual_data = (int)fs.read();
                   while(actual_data > -1){
                        bs.write(actual_data);
                        actual_data = (int)fs.read();
                   byte [] final_data = bs.toByteArray();
                   File out_file = new File("C:\\temp_jar\\Ravindra_test.JPG");
                   FileOutputStream out_stream = new FileOutputStream(out_file);
                   out_stream.write(final_data);
                   out_stream.flush();
                   fs.close();
                   bs.close();
                   localfile = null;fs = null; bs = null;
                   return final_data;
              } catch (Exception e) {
                   // TODO Auto-generated catch block
                   e.printStackTrace();
                   return null;
    Java Script Code:

Maybe you are looking for

  • MacBook Pro Retina Running Very Slow (EtreCheck)

    Problem description: My MacBook Pro Retina has been running very sluggish lately. It used to be so consistently fast and now it is just so sluggish. EtreCheck version: 2.0.11 (98) Report generated November 25, 2014 at 11:17:21 AM MST Hardware Informa

  • Upgrade Presenter 8 to Presenter 10

    I want to upgrade Presenter 8 to Presenter 10. What is the cost and why do I have to have Presenter 9 if I want to upgrade to Presenter 10, according to all of the online upgrade options? Trying to ask a question is very frustrating. There is no phon

  • How to delete downloaded podcast and reset podcast to not downloaded??

    Hi all, Hope this is a simple question/answer. I've got several podcasts with lots and lots of downloaded episodes which I am no longer interested in keeping on my Powerbook. I can click on the episode I want to delete and delete the file once I use

  • Truncating values in column

    Our application (using CR 9.x) gets installed and when I run a report the values in the far right column are fine. I install another application (not ours) which uses CR 8.5 and now my first application doesn't print the far right column correctly. E

  • Ipod doesn't show on itunes

    When I connect my Ipod to the computer via the USB cable, it will charge.  I tunes is open and it doens't see my Ipod.  I have restarted the Ipod and still nothing.  This is a window XP Pro computer.