File Sender adapter - source file name - weird

Hi all,
We have a sender file adapter polling an ftp location. The Dynamic config has been enabled to get the source file name.
The actual file name is - "hrmd.xml", but in the dynamic configuration node, in sxmb_moni, the fileName is shown as ./hrmd.xml.
This does not occur with any other file sender adapter comm channels polling ftp locations.
I guess this has something to do with the ftp server. Did anyone face this issue?

the fileName is shown as ./hrmd.xml
The file name surely cant have a / in it....such characters are not allowed.
is there any way we can change the fileName message attribute once the file is picked up
Create a UDF for Dynamic Configuration and change the name as per your requirement (in XI)....the source file may be having proper format for name and i assume that you have to change it for receiver file name

Similar Messages

File Sender adapter with File content conversion

Hi
I'm having problems picking up a flat file that has some junk characters in the file.
I'm usign a file sender adapter with file content conversion. The adapters shows the following error-
Conversion of complete file content of to XML format failed around position 0: sun.io.MalformedInputException
this is the sample data with junk char's -
A20099201009999009999060815160505051700130008151vÿÿÿÿ³ r 0OK0476 31N016227241915840IV 00840 ÿÿÿ ÿ ÿÿÿÿÿÿÿÿ ÿ ÿÿÿ
There is not much in the file content conversion. This is a fixed length file, I'm just pickign it up & passing it to an inbound proxy. All my processing is in the proxy.
I'd appreciate any suggestions.
Thanks
Rachana

Hi Rachana,
Do you use a specific "encoding" like UTF-8 or ISO-8859-1 in your Sender CC?
To be simple, Encoding is linked to country, you can find all "iso-nnnn" via google or some of them in sap help.
http://help.sap.com/saphelp_nw2004s/helpdata/en/e3/94007075cae04f930cc4c034e411e1/content.htm
Moreover, with your source file opened thanks to Notepad (for instance), use option "save UNDER", you will the encoding use by your file
Mickael

Error in configuring File Sender Adapter with File Content Conversion

Hi
i am designing a File to File scenario using file content conversion in which the input is comma separated file and output is a XML document.
mentioned below are the configuration information:
Recordset Name: Substr
Substr.fieldSeparator: ,
Substr.endSeparator: 'nl'
Substr.fieldNames: Name, Password
Substr.keyFieldValue: Name
and the error i can see in adapter framework is:
Sender Adapter v0830 for Party '', Service 'FileContentConversion':
Configured at 14:30:45 2005-04-07
Initialization error: Conversion initialization failed with java.lang.Exception: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found:
Mandatory parameter 'Substr.fieldNames': no value found
plz help me ASAP.
thanks and regards,
Varun Joshi

Hi Varun...
Regarding ur error.....the name and password u send in csv is not getting recognised.. so u have to check the data type structure.
there must be a recordset name and subelement must be recordset structure..the data type must be
<datatypename>
 <recordsetname>
 <recordsetructurename>
 <name>
 <password>
please try in this format and ur name and password will get recognised

Problem in File Sender Adapter in File with quotes

Hi experts.
We're having a problem in File Sender Adpapter.
We've configured the adapter with FCC. We use the fieldSeparator = ; to convert the file to xml.
The problem arises when between two ; appears a quote. For insantce in this line:
HUMALVAL MASCOTAS S.L.;"AV/DE EUROPA SN;P.IND.ALCORCO;28922;ALCORCON;40.349968;-3.847452;
The adapter shows this error:
More elements in file csv structure than field names specified.
If the line was (without "):
HUMALVAL MASCOTAS S.L.;AV/DE EUROPA SN;P.IND.ALCORCO;28922;ALCORCON;40.349968;-3.847452;
everything would work correctly.
How could we solve this?
Thanks in advance.
Regards.

Hi,
Please use xml.enclosureSign=u201C in your sender FCC.
Hopes this helps to you.
Regards,
P.Rajesh

File-Sender: Verification of file content during file content conversion

Hello,
I have a question regarding file verification when using the file-sender adapter.
I got a flat file (.csv) that I convert into XML with the file-sender adapter and file-content-conversion.
In the file there is a column RecTyp that is my KeyFieldValue. Possible values for RecTyp are B, D, U, T.
So far so good. All this works perfectly.
If (due to an error) there is another value in RecTyp than the 4 mentioned above (B;D;U;T) the file adapter ignores this row today. And here begins my issue:
I want to change this behavior. That means in detail, I want to check if there is another value in my KeyFieldValue RecTyp than specified. If this is the case an exception should be thrown. The whole message should not be delivered.
We had the idea to use the module-processor for this verification.
But may be there are other suggestions. Or may be some one can provide an appropriate module that is already written, etc.
Does anyone have an idea?
Kind regards,
Tobias

Hi,
It is better to pick the file in generic way i.e Row by Row and then go with the validation with the help of Adapter Modules or in the Mapping.
For more-
/people/sravya.talanki2/blog/2005/08/16/configuring-generic-sender-file-cc-adapter
Thanks,
Moorthy

File Sender Adapter - Multiple Source Directory

Hi all,
I have the following file to IDoc Scenaraio:
The source file might be in any of 3 directories in source system and so created file sender adapter as follows:
File access parameters:
Source Directory : Directory1
File Name         : Filename*.XML
Addiontal Directory:
Directory2    Filename*.XML
Directory3    Filename*.XML
The porblem we are facing is the file adapter is picking the file from Directory1& 2 and not from Directory3.
If the change Directory Order in adapter as follows:
File access parameters:
Source Directory : Directory3
File Name         : Filename*.XML
Addiontal Directory:
Directory2    Filename*.XML
Directory1    Filename*.XML
... then file from Directory 2 & 3 is getting processed and not from Directory1.
Any thoughts on this will be greatly appreciated.
Thanks
Sarat.

Why use BPM for this?
Instead write an abap program to pick from any of 3 directories in source directory and place it in the shared XI folder and configure your file adapter pointing to XI shared folder...shecdule the abap report for every 5 min..
Wanna know more /people/sravya.talanki2/blog/2005/08/23/sender-xi-ftp-adapter-with-regular-path-expression-150-abap
Or write OS level scripts for doing same.

FILE SENDER ADAPTER - TO GET A DINAMIC FILE NAME IN THE DIRECTORY

Hi,
     Please help me.
     I have to read by a file sender adapter a specific file in the directory that its name is Dyyyymmdd, where yyyymmdd is variable according with the current day:
     D      - fixed letter
     yymmdd - year,month and day of the current day.
     I cant´t use D* in the File Name Scheme because I must read only the one file generated in the day.
     How can I configure my file sender adapter to read this especific file in the directory?
      Thanks in advance.
      Mider.

Hi Krishna,
    I must access only one file by time ( of the current day ), but in the directory I have a lot of them of different dates. I mean, in the of the read ( in the adapter configuration ) , I need to configure the name of the file Dyyyymmdd before of the reading in the directory, in other words, I need to construct the name of file (withe the current date) before the communication channel access the file to read it.
    I think that OS command just can be applicated in file receivers, but if possible, at your purpose, how can I access the name of this especific file via OS command for senders?
    Thanks,
         Mider.
Message was edited by: Midervilson Andrade
Message was edited by: Midervilson Andrade

File Sender Adapter - Dinamic Source Directory and Filename

Hi Experts,
I have to receive in XI a file and depeding of some info, put it in diferent directories with diferent fieldnames.
In receiver File Adapter we can set the directory and fieldname dinamically by ABAP-CLASS mapping, but not in Sender.
I've read Michal's blog
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
and sap help
http://help.sap.com/saphelp_nw04/helpdata/en/43/03612cdecc6e76e10000000a422035/frameset.htm
But, I can't find Adapter-Specific Message Attributes in my File Adapter...:-) I've checked SP version is SP16, where are my Adapter-Specific Message Attributes?
How can I set Directory and Fieldname at runtime for Sender File Adapter?
Please help...
Thanks all in advance,
Regards.
Urtzi.

Hi Nilesh,
Your threath is not about my issue...
Answering to other friends, what I want is not to write p.e.: '/server/dir/' in each File Sender Adapter Channel, and put it with any other way looking some 'customizing' or checking a condition.
The problem is that frecuently in the Company changes servers and we have to enter to the Directory and change every Channel one by one...We would like to reduce the maintain of the Channels with a mapping, variable, customizing table...or something similar. Do I explain?
I don't know if its possible but I had the hope...:-)
Thanks all.
Urtzi.

Changing source file for file sender adapter in adapter module

Hi guys!
3rd party partner send us files, which are not acceptable by file adapter, so we need to implement (I suppose) adapter module in file sender adapter to correct the file format before it is taken by standard adapter. I have no experience in this development field. Could you give me:
1, whether it is possible (changing file contents before it is taken by standard file sender adapter)
2. any ideas, where to start with the development (pdf with info etc.)
Thanx a lot!
Olian

2. any ideas, where to start with the development (pdf with info etc.)
>>>>>
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/02706f11-0d01-0010-e5ae-ac25e74c4c81
1, whether it is possible (changing file contents before it is taken by standard file sender adapter)
>>
yes you can achieve this in the logic in a module

Semantics File Sender Adapter to determine which files to retrieve

Hallo,
does anybody has experience with this semantic?
Thanks in advance,
Frank
From the FAQ-List of file-adapter(Note 821267 , Question 27).
Q: Which semantics does the File Sender Adapter apply to determine which files to retrieve from an FTP server?
A: Up to and including SP13 the File Adapter will issue an NLST command (see RFC 959) with the configured source file name scheme as first parameter to the FTP server. It will try to retrieve any of the files returned by the FTP server in response to this command.
Starting with SP14, the File Adapter will issue a LIST command with the configured source file name scheme as first parameter to the FTP server. If it is able to parse the returned result (which is the case for UNIX- and Windows-style directory listings), it will retrieve any of the returned files. If it cannot parse the result, it will fall back to the pre-SP14 implementation and use the NLST command as described above.

Frank
We are on SP12 and have had problems with this and specifically, the FTP server on Solaris, not being fully RFC959 compliant.
We've had to get a different FTP Server as we were returned *.xml no file or folder found instead of 550 *.xml no file or folder found.
This increased the polling to the server, and filled up the ftp logging file, which intern filled up the partition and crasehd the server.
We got round this by installing http://www.proftpd.org/

Cant do a file get from external server using file sender adapter with ftp

Hi all,
Up until now our company has only used the file sender adapter with ftp protocol to get a file from our XI server for processing and input the file into an integration process
I have a requirement to do an ftp file get from an external server
From our XI development server I can ftp directly to the external server and view the required directory using the command window via a DOS prompt (FTP open ...). So all firewall issues and communications are fine
Unfortunately I cannot currently pull files from the external server using the XI file adapter with ftp protocol from the XI development server AWB017
FTP Connection Parameters: External server name using port 21, Data Connection is Passive, No security, I supply a userid and password
Processing Parameters: Processing Mode is Archive (I tried test but this did not work either)
No messages appear in the RWB
Is there something else that I need to set up in order for the external ftp get to work via the XI file adapter?
Regards,
Mike

Thanks for your responses.
I have found the error messages in the File Adapter Monitor
Scenario 1
When I prefix the source directory with a forward slash, eg /Folder/Subfolder the error message is as follows
EST: Error: Error connecting to ftp server 'ip address': FTPEx: /Folder/Subfolder: The system cannot find the path specified
Scenario 2
When I DO NOT prefix the source directory with a forward slash, eg Folder/Subfolder a different error message is returned
Error: Retrieving file 'FILENAME.XML' failed unexpectedly: FTPEx: Folder/Subfolder: The system cannot find the path specified
At least in this scenario the adapter has been able to identify the file on the external FTP site but cannot retrieve it
Questions
I thought that the backslash prefix for the source directory was mandatory but I am receiving an error in each scenario
I receive the same error message whether the Processing Mode is 'Archive' or 'Test'
The logs on the external ftp server seem to indicate that I am simply connecting, sending username and password then quiting straight away. I am not issuing any commands that they can see
I thought that being a Sender adapter it would inherently execute a Pull or Get command
To recap, from our XI development server I can ftp directly to the external server and view the required directory using the command window via a DOS prompt (FTP open ...). So all firewall issues, communications, userid and password are fine
Has anyone experienced these issues?
Please advise on next course of action?
Regards,
Mike

File Sender Adapter - File overwritting in the Archiving folder

Hello Experts,
I am doing File sender to proxy Receiver Async Scenario.
In File Sender adapter, i am using the Archiving option by spacifying the
Archiving path.
Files are picked up and archiving happen successfully.
Problem is: - once the File is picked up and archivied into the Archiving location
If end user again rectifies some data in the same file and place it in the source directory
then i am getting the following error in RWB Commu. channel monitoring.
Failed to archive file 'File1.TXT' as '/Input File location/File1.TXT' after processing. The FTP server returned the following error message: 'com.sap.aii.adapter.file.ftp.FTPEx: 550 File not renamed. File already exists. You may delete the existing file and then rename.u2019 For details, contact your FTP server vendor.
I know this is because of File sender adapter is trying to archive the file with the same name(File1.txt) in the archiving location.
My Question: - Is there any option to allow the File sender Adapter for overwritting the
File in the archiving location.
Thanks & Regards
Jagesh

check if there is proper rights to over write files in the archive folder.
The problem seems to be that the rights/authorization is not there. Else the adapter usually overwrites files in the archive folder unless you use the timestamp option.
Archive
Files that have been successfully processed are moved to an archive directory.
u25A0       To add a time stamp to a file name, select the Add Time Stamp indicator.
The time stamp has the format yyyMMdd-hhMMss-SSS. The time stamp ensures that the archived files are not overwritten and it enables you to sort them according to the time that they were received.
u25A0       Under Archive Directory, enter the name of the archive directory.
u25A0       If you want to archive the files on the FTP server, set the Archive Files on FTP Server indicator. If you do not set the indicator, the files are archived in the Adapter Engine file system.

Get filename from file sender adapter

Hi Experts,
I have a question regarding the file/ftp adapter (sender).
I have a directory with xml and pdf files. for every xml file there is a pdf file with the same filename. for example:
file1.xml
file1.pdf
file2.xml
file2.pdf
file3.xml
file3.pdf
Now I want to read the xml file with the file sender adapter. afterwards I want to read the related pdf file. for example: If I read the file file1.xml afterwards I want to read the pdf file file1.pdf with the file sender adapter. For this it is nessessary to get the filename from the xml file so that I can read afterwards the pdf file. How can I realise it?
Thanks and best regards
Christopher

Hi srinivas,
thanks for your quick answer.
That the file adapter is not able to read pdf files is clear to me. In this case I only want to transport the pdf. that works fine. I tested it.
the problem is the following:
I have a xml file with the name "file1.xml". I read the xml file with the sender file/ftp adapter configured with filename "*.xml". Then I want to import the pdf file with the name "file1.pdf". Therefor I need the filename from the xml file.do you know what I mean? So XI has to know the filename of the xml to import the pdf with the same name ...
regards

File Sender Adapter

Hello All...
sysinfo: files to join, file1, file2, file3 output after joining the files should be sal.txt and the executable file is run.bat
We have a File Sender Adapter and we are trying to "Run an Operating System Command Before message Processing" where we execute run.bat, if we execute it manually this executable run.bat is ok, but if we try to use it from "run operating System command before message processing" it does not work (it does not create the sal.txt file in the operating system)
we are wondering if that is because file sal.txt in the field "file name" of "file access parameters" does not exist in the operating system before the file run.bat runs.
Any clue about this?.
Regards

HI Maru,
Why don't you try to run this command from the sender directory specified in your sender file adapter in your command prompt??
Does that result in success???
And also, Instead of using a .bat fie, use the following command
COPY "C:\MyFolder\file1.txt" + "C:\MyFolder\file2.txt" +"C:\MyFolder\file3.txt" "C:\MyFolder\sal.txt"

File sender adapter (FTP) - processing mode "Archive"

Hello all
We're polling files from an external FTP server. For this I created a scenario on XI according to this thread:
When setting processing mode to "Archive" in the file sender adapter (ftp) it polls the file, stores it to the archive directory I specified and then tries to delete the file on the FTP server side. This returns me an error because we're not allowed to delete the retrieved files on the FTP server!
Because of this error the file adapter stops further processing and does not poll all the other files.
How can I disable this deletion mechanism while keeping processing mode to "Archive"?!?!?
We do not want to use processing mode "Delete" or "Test" and we don't see other options to influence this behaviour.
Thanks for any guideance on this one in advance!
Kind regards,
Renaud

Hi Bhavesh
Sorry for the late answer. Unfortunately I can't ask the application system to provide file names containing a timestamp within. The files are provided by an external partner and are retrieved by several others as well.
In the meantime I managed to achieve this:
In repository I created dummy data types, message types and message interfaces. No mapping programs and interface mappings!
In configuration I created the necessary communication channels (1 ftp sender, 1 file receiver) and the required receiver and interface determinations as well as the sender and receiver agreements.
The result of this is:
I'm able to poll some specific files via ftp from remote host. The file names are file1.arj, file2.arj, file3.arj and file4.arj. All 4 files have the same SourceFileTimestamp (e.g. "20060727T053900Z").
I'm able to store those 4 files 1:1 in a target directory with the same file names. Until here I did NOT need to follow this blog: <a href="/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14: The same filename from a sender to a receiver file adapter - SP14</a>.
As of this blog it is possible to access adapter specific attributes and make them available in message mapping using user defined functions. This way I'm able to get the SourceFileTimestamp from the polled files and use it in a message mapping. This way I'm also able to use it in variable substitution on file receiver adapter (syntax = "payload:root,1,fileTS,1") in order to dynamically create a directory with this syntax: YYYYMMDD.
So far so good... but the only remaining BIG problem now is, that as soon as the mapping is activated and assigned in the interface determination, the created files contain the XML payload instead of the original binary content. Where has it gone? How should the target message type look like so that it can carry over the original binary file content?
BTW: isn't it possible to post screenshots? Would be much more easier to explain things... so sorry to anyone if I wasn't clear enough!
TIA and best regards,
Renaud

File Sender adapter - source file name - weird

Similar Messages

Maybe you are looking for