FILE sender, error mapping

Hello,
I've FILE to RFC interface.
Input file is xml (NFS)
<fichero>
<field1>
<field9>
This file don't contain the <ns0:FICHERO xmlns:ns0="http://Pedidos"> and runtime the error RuntimeException in Message-Mapping transformatio~ occurs,
Is it necesary put this sentence in xml file? (with this sentence the test in message mapping IR is OK),
Should I require that you send the file to include this sentence?
thanks very much,

Hi Sakthi,
This is basically for your namspace if you not required
If you don't required <ns0:FICHERO xmlns:ns0="http://Pedidos"> tag in the xml while mapping so replace your namesapce from the message type both sender and receiver if required.
Message Type -- > XML Namespace (remove your namesapce under their) and activate.
Check your source and target structure, the following tag <ns0:FICHERO xmlns:ns0="http://Pedidos"> should not be there.
Regards,
Sameer
Edited by: sameer Khanna on Apr 2, 2009 1:43 PM

Similar Messages

File Sender Scenario - Mapping error message

Hi All
Scenario
I am trying to develop a test scenario where a record is read from the file and sent to R/3 using RFC (Bapi)
So i believe this will involve a file adapter as sender and a RFC adapter as receiver, I have configured data types, message types, message mapping, interface mappings, sender determination, receiver determination etc.
Problem
When i put the text file in the polling directory the file is read, but there is an error,
On checking Processed XML message in SXMB_MONI I see that the following steps listed
1 - Inbound message (CENTRAL)
2 - Receiver Determination
3 - Interface Determination
4 - Receiver Grouping
5 - Message Branch According to Receiver
6 - Request Message Mapping
7 - Request Message Mapping
Step 1 - 6 does not show any error message, step 7 has an error with the following message
<SAP:Category>Application</SAP:Category>
<SAP:Code area="MAPPING">EXCEPTION_DURING_EXECUTE</SAP:Code>
<SAP:P1>com/sap/xi/tf/_MM_basic_paycreate_file_to_rfc_map~</SAP:P1>
<SAP:P2>com.sap.aii.utilxi.misc.api.BaseRuntimeException<;/SAP:P2>
<SAP:P3>Fatal Error: com.sap.engine.lib.xml.parser.Parser~</SAP:P3>
Additional Information
My Business System Commnication channel has a Sender File adapter, this file sender is configured to read from file system from a certain directory and message protocol is File Content Conversion.
In Content Conversion parameters input fieldname and input separator are configured (does anything else need to be configured in this section?)
My input file is of the structure aaa,bbb,ccc,ddd,eee,fff,ggg
My Data Type is of the structure
<data header>
     <aaa></aaa>
     <bbb></bbb>
     <ccc></ccc>
     <ddd></ddd>
     <branch1>
               <eee></eee>
     </branch1>
     <branch2>
               <fff></fff>
     </branch2>
     <branch3>
               <ggg></ggg>
     </branch3>
</data header>
Questions
First question is why is there 2 instance of Request message mapping showing up in the monitor? Isn't this supposed to show up only once?
Second question it appears that the problem is something to do with Mapping (Message Mapping) but i tried to test the message mapping manually using the data generated in the payload and it passes the mapping successfully.
Third question, how is the input flat file converted to the complex structure of data type (as mentioned in additional information above) is this done by the input.filedNames that assigns the corresponding values from flat file to the data type?
Fourth question - is there a way to run the process step by process (as a step through in other programming IDEs?) so the problem can be more easily identified?
Thanks
Anant

Hi All
I little update - it appears that some of the scenarios developed earlier that were working earlier are now also failing at the same process of mapping with this error message.
So i am suspecting that this is not a problem with the mappings in my scenarios but rather a some technical setting related to how XI invokes this class - com.sap.aii.utilxi.misc.api.BaseRuntimeException.
Does any one have any ideas what i can check to confirm this? Whether the problem is in the technical setting or the scenario configuration?
thanks
Anant
error message attached.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="MAPPING">EXCEPTION_DURING_EXECUTE</SAP:Code>
<SAP:P1>com/sap/xi/tf/_MM_CheckDeposit_</SAP:P1>
<SAP:P2>com.sap.aii.utilxi.misc.api.BaseRuntimeException</SAP:P2>
<SAP:P3>RuntimeException in Message-Mapping transformatio~</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>com.sap.aii.utilxi.misc.api.BaseRuntimeException thrown during application mapping com/sap/xi/tf/_MM_CheckDeposit_: RuntimeException in Message-Mapping transformatio~</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>

File Sending Error

All of the sudden, iChat is not letting me send a file, but it lets me receive them. The person on the other end is getting a message saying it is waiting for me to start, and I usually get an error or it tells me the other person did not accept the file. Any suggestions?
Thanks in advance...

The Airports do not have the UPnP function.
However if you have another device like a Modem that does the Airport will not interfere with this.
Many new modems and routers do have the UPnP Function and in some cases newer firmware for older units do as well.
If Apple made modems and routers they would have presets like other devices do based on the ports for Apple applications.
Unfortunately modems and routers have presets for PC applications and in some cases Games which may be run on several devices like computers and game boxes.
As there are thousands of modems and routers to choose from and iChat does use ports above the 1024 mark (most devices are open below this and is why Web browsing and email is Plug and Play) we are stuck with having to set up our devices.
I am not sure that any further update to the OS will make this any simpler or take control of the modem/router set up.
Sites like this one http://portforward.com/routers.htm and my pages http://www.ralphjohnsuk.dsl.pipex.com/ try to make the process as simple as we can and present this Apple Doc information http://docs.info.apple.com/article.html?artnum=93208 in a usable form.
Ralph

...file Sender content conversion 'lastFieldsOptional' error

Hi All,
I am working on a File Sender content conversion--> flat file to XI.
it's fixed length field all the rows with same column.
090627 344535AFDFG+GBP65433 ASDSSD GFD dFSSGFD 6757532
090627 344535AFDFG-GBP65433 ASDSSD GFD dFSSGFD 6757532
090627 344535AFDFG-GBP65433 ASDSSD GFD dFSSGFD 6757532
090627 344535AFDFG-GBP65433 ASDSSD GFD dFSSGFD 6757532
090628 344536AFDFG+GBP45434 ASDSSD GFD dFSSGFD 6757532
090628 344536AFDFG-GBP45434 ASDSSD GFD dFSSGFD 6757532
**EOF**
I am sucessfully able to handle the file if i remove "**EOF*" from incoming file. But i get "lastfieldsOptional" error with "*EOF**"
>
Parameters-
     Recordset Structure - ROW,*
     Recordsets per message - *
    ROW.fieldFixedLengths - 6,8,20,10,30,1,3,1,11,1,11,6,10,10,20,10,10,2,6,6,2,6,6,3
    ROW.fieldNames - INV_DATE,INV_NO,PAYMENT_REF,CUST_NO,CUST_NAME...etc etc
   ignoreRecordsetName - true
There are parameters available to ignore Last field(last column) of a Row/Rocerdset
but how to ignore the last row of the file.
Plz suggest some parameter to ignore the last row/field of the file.
Regs,
Ansh

Ansh,
.lastFieldsOptional is obselete and you cannot use. Please see sap help:
http://help.sap.com/saphelp_nw04/helpdata/en/2c/181077dd7d6b4ea6a8029b20bf7e55/content.htm
The best thing comes to my mind is use:
.keepIncompleteFields as YES
Also give a try with:
.missingLastfields as add
So with this I think your last line in the file will read into XI. But the value of last line is **EOF**. So the length is 9. Since your the first two fixed lengths are 6 and 8. You will have these values as ***EOF and ***. So while mapping you can use doesnot satrt with * and map it, so that your last line will be ignored.
Note: with this apporach you have to make sure your first two columns never start with *. If you have a doubt then you can use the condition doesnot equal to ***EOF for first field and doesnot equal to *** for the second field when you map. I hope it makes sense to you.
Regards,
---Satish

XSLT mapping to retrieve FileName from FILE SENDER adapter

Hi
I have an File Sender adapter scenario where I have switched on Adapter-specific message attributes (FileName).
In my XSLT mapping program I need to RETRIEVE the filename and map it. Can anyone help please?
Thx in advance

Hi Bohamo
Refer the following link.It provides the required solution for you.
http://help.sap.com/saphelp_nwpi71/helpdata/EN/83/2200cb50d345c793336d9a1683163e/frameset.htm
Thanks
Ram

Archive file with errors in sender file adapter not working! please help!

Hi Experts,
I have a file to RFC scenario. the input is a XML file. I have setup the flag in sender file adapter channel for archiving the input files with errors. But it is not working.
For testing I have used an invalid xML file for example without the main XML tag. I have also tested with a MSWORD file saved with.xml extension. But in both the cases the files are not getting archived.
My archive location permissions are fine and in fact normal archive operation is happening. That is, if I select the processing mode as "Archive" and gave the Archive directory then files are getting archived. The problem is only with the "Archive faulty source files" option.
What am I missing? DO I need to do some more configurations?
What are the prerequisites if any for this option?
How to test this?
Please help me! I will be greatfull to you all!
Thanks & Regards
Gopal

and go thru this links
Creating a Single Archive of the Version Files
http://help.sap.com/saphelp_nw04/helpdata/en/79/1e7aecc315004fb4966d1548447675/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/31/8aed3ea86d3d67e10000000a114084/frameset.htm
Note: reward points if solution found helpfull
Regards
Chandrakanth.k

File sender adapter Module Error

Hi Everybody,
I have developed an adapter module for file sender to rename the file name which is picked from the directory and I am getting an error
"Attempt to process file failed with java.lang.NullPointerException".
Can anybody tell me why is this error?
Thanks,
Zabi

Hi,
first check that module has been succesfully executed or not .This you can check in RWB .
Secondly go in the file adpater and click on to module tab and check
1-there will be two things one will be adapter module that you have depolyed. other one will be call sap adapter.
2- make sure that call sap adapter should come after the module you have deployed. and having the key value less then adapter module (let say your adapter module is having the key value 1 and call sap adpater is having the key value 0 then you need to change the key value there)
Thanks
sachin

Error Archiving File in File Sender Adapter using AF_Modules/PayloadZipBean

Hi everybody.
I have to pick a zip file up from ftp server, unzip an convert the file in xml.
Im using this modules in file sender adapter:
AF_Modules/PayloadZipBean --> To unzip de file
AF_Modules/MessageTransformBean --> file to xml
The problem is when I try to archive de file. Im getting this error and I dont know why (This path exists /out/ProcesadosSinError/)
Could not archive file 'test.zip' as '/out/ProcesadosSinError/20100518-091029-155_test.zip' after processing: java.io.FileNotFoundException: /out/ProcesadosSinError/20100518-091029-155_test.zip (A file or directory in the path name does not exist.)
Could it be that is not possible to archive with AF_Modules/PayloadZipBean?
Thank u so much

Hi Stefan.
Absolutely. This path exists. It's an absolute path from root. I can´t understand the error!!!!
Thanks!!!
Edited by: Christian Abad Chico on May 18, 2010 9:35 AM

How to skip a blank row in File Sender Adapter - while mapping ?

Hi friends ,
                 While i am reading a test file it contains some Blank Lines i need to skip that blank lines and i have to read only full line .
                    Do i need to give any configuration in File Sender Adapter ?
                    Expecting your reply asap
Best Regards .,
V.Rangarajan

<i>Hi friends ,
While i am reading a test file it contains some Blank Lines i need to skip that blank lines and i have to read only full line .
Do i need to give any configuration in File Sender Adapter ?</i>
>>>>
currently the only option that the file adapter provides you is to skip lines at the starting of the file but not in the middle of the file.
in case these blank lines are at the starting of the file then you can use the following option
<i>Under Document Offset, specify the number of lines that are to be ignored at the beginning of the document.
This enables you to skip comment lines or column names during processing. If you do not make an entry, the default value is zero lines.</i>
Ref: http://help.sap.com/saphelp_nw04/helpdata/en/2c/181077dd7d6b4ea6a8029b20bf7e55/content.htm
else the best way would be to handle the same in your mapping (test if the xml node is empty, in tht case do not map it) or use a module to delete all blank lines in the file.

File TO File-Using XSLT mapping (for Beginners) --- Error in XSLT

Hi,
I am following this wiki (TO File-Using XSLT mapping (for Beginners))
https://wiki.sdn.sap.com/wiki/display/XI/FileTOFile-UsingXSLTmapping%28forBeginners%29
When creating Xslt from the MapForce, when I click on the XSLT Tab I am getting the following error
http://www.flickr.com/photo_zoom.gne?id=1216715484&size=o
How to correct this error ?.....
Thanks
srini
Message was edited by:
srinivas

Hello,
The XSD you are using is from Data Type and you are using it for mapping.
Instead export XSD for Message Type and also pass the XML schema for source that will solve the issue and your XSLT will be generated.
Regards,

AS2 error The FILE send adapter cannot open file

I have AS2 setup under biztalk. I have receive port which listen to HTTP adapter and keep listening on web site.Then there is corresponding send port which just write that file in folder . Send port just have filter for Receive adapter name.
It works fine, but some time I get error message
The FILE send adapter cannot open file <folder name\guid.txt > for writing.
Details: The system cannot find the path specified.
I am not able to understand what is error for this? Please help me to figure-out this.

Specifying the Backup transport is not going to solve the problem. Specifying the backup transport in this case is something like addressing the symptom of the issue and not finding the solution to root cause of the issue.
As you specified, if the mentioned error only happens some time but not always. In this case, the message "The
FILE send adapter cannot open file <folder name\guid.txt > for writing." would just be a warning message. Just by setting the retry in the send port will solve the issue. i..e Since this issue occurs rarely, it may be short lived glitch.
So by setting the retry count (lets say 3 times) with retry interval (let say 5 mins), this issue can be easily mitigated. You would not lose the message. So during the glitch you would get this message as warning, send port will retry "after specified
retry interval so after 5 mins", so by that time chances of files transfer is high. So this problem can be easily handled just by having retry count and retry interval in send port.
But you need to find the actual cause for this issue or you need to find the permanent resolution for this issue.
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

ORA-06521: PL/SQL: Error mapping function while writting into a text file

Hi,
I'm getting an errror ORA-06521: PL/SQL: Error mapping function while trying to write data into a text file.
I'm using the following code:
--To create a new directory
create or replace directory temp as 'C:/temp';
declare
                l_str varchar2(1000);
                output_file utl_file.file_type;
                cursor test_write_cur is
                     select EMPNO,ENAME,JOB,SAL,HIREDATE
                       from EMP
                     where DEPTNO=30;
begin
           output_file := utl_file.fopen('TEMP','TESTFILE.txt','w');
           for test_write_rec IN test_write_cur
           loop
            l_str :=     test_write_rec.EMPNO||'^'||test_write_rec.ENAME||'^'||test_write_rec.JOB||'^'||
                     test_write_rec.HIREDATE||'^'||test_write_rec.SAL||chr(10);
            utl_file.put_line(output_file,l_str);
                 end loop;
           utl_file.fclose(output_file);
end;Please suggest me if i'm wrong.
Thanks & Regards,
Sanket Mishra

Dear Sanket,
I think you are need use TO_CHAR() function
to_char(test_write_rec.EMPNO) ,
to_char(test_write_rec.HIREDATE,'DD.MM.YYYY')
to_char(test_write_rec.SAL)

Error using Message Transform Bean in SimplePlain2XML in file sender

Hi guys.
Im using Message Transform Bean to convert from file to xml in file sender.
My structure look like this:
ROW (1..n)
>TRANSPORTES (1)
>ENTREGAS (1..n)
And I have configured the module like this:
AF_Modules/MessageTransformBean - transform
transform - Transform.Class - com.sap.aii.messaging.adapter.Conversion
transform - xml.ENTREGAS.endSeparator - 'nl'
transform - xml.ENTREGAS.fieldFixedLengths - 1,30
transform - xml.ENTREGAS.fieldNames - TIPO,NUM_ENTREGA
transform - xml.ENTREGAS.keyFieldValue - E
transform - xml.TRANSPORTES.endSeparator - 'nl'
transform - xml.TRANSPORTES.fieldFixedLengths - 1,30
transform - xml.TRANSPORTES.fieldNames - TIPO,NUM_TRANSPORTE
transform - xml.TRANSPORTES.keyFieldValue - T
transform - xml.conversionType - SimplePlain2XML
transform - xml.documentName - MPrueba_Zip
transform - xml.documentNamespace - http:/XXXXXX.es/XXXX/sap/prueba
transform - xml.keyFieldName - TIPO
transform - xml.processFieldNames - fromConfiguration
transform - xml.recordsetName - row
transform - xml.recordsetStructure - TRANSPORTES,1,ENTREGAS,*
Im getting this error and I don´t know why:
Error: com.sap.aii.messaging.adapter.trans.TransformException: Transformer Conversion3.0.5227 Error initializing Class: java.lang.Exception: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found: (4408) Parameter 'xml.fieldFixedLengths' or 'xml.fieldSeparator' is missing (4409) Parameter 'xml.fieldNames' is missing (4403) ; nested exception caused by: java.lang.Exception: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found: (4408) Parameter 'xml.fieldFixedLengths' or 'xml.fieldSeparator' is missing (4409) Parameter 'xml.fieldNames' is missing (4403)
Why am i doing wrong?????
Thanks a lot!!!

Hi
For Complex conversion you have to use xml.conversionType as "StructPlain2XML"
http://help.sap.com/saphelp_nw04/helpdata/en/24/4cad3baabd4737bab64d0201bc0c6c/content.htm
Regards
Ramg

File Sender Communication channel with error

Hi,
One of the File sender CC is in red but shows "Functioning". But in the Process Detail section it just showing
5/10/11 2:24:00 AM d28c6542-0d7e-453b-1d96-9e0a18159315 Retry interval started. Length: 60.0 seconds
5/10/11 2:24:00 AM                                                                     Processing started
5/10/11 2:23:00 AM d28c6542-0d7e-453b-1d96-9e0a18159315 Retry interval started. Length: 60.0 seconds
5/10/11 2:23:00 AM                                                                       Processing started
5/10/11 2:22:00 AM d28c6542-0d7e-453b-1d96-9e0a18159315 Retry interval started. Length: 60.0 seconds
5/10/11 2:22:00 AM                                                                      Processing started
Please let me know is there any error with my channel ot wny is it red then?
There is no Polling step in the Process Details.. Please reply ASAP
Thanks,
Shweta.

The Status of the channel is "Processing Erros in last 20 seconds". And in the processing deatils it just show the below two steps.
5/10/11 2:24:00 AM d28c6542-0d7e-453b-1d96-9e0a18159315 Retry interval started. Length: 60.0 seconds
5/10/11 2:24:00 AM                                                                        Processing started
5/10/11 2:23:00 AM d28c6542-0d7e-453b-1d96-9e0a18159315 Retry interval started. Length: 60.0 seconds
5/10/11 2:23:00 AM                                                                         Processing started
5/10/11 2:22:00 AM d28c6542-0d7e-453b-1d96-9e0a18159315 Retry interval started. Length: 60.0 seconds
5/10/11 2:22:00 AM                                                                        Processing started
It is continuasly showing the same message ID "d28c6542-0d7e-453b-1d96-9e0a18159315 " but this ID does not exist in SXMB_moni not in RTW message monitoring.
If I double click the message ID shown in the CC process details it shoes me below content.
Time Stamp Type Description
2011-05-09 22:03:00 Information Channel FileSenderGeneric: Converted complete file content to XML format.
2011-05-09 22:04:00 Information Channel FileSenderGeneric: Converted complete file content to XML format.
2011-05-09 22:05:00 Information Channel FileSenderGeneric: Converted complete file content to XML format.
2011-05-09 22:06:00 Information Channel FileSenderGeneric: Converted complete file content to XML format.
Please tell me what is the problem. there are No java Locks ...I have checked that.
Shweta.

File sender communication channel error

Hi gurus please help me on the below issue ,suddenly my file(sender)communication channle is showing error status stated below error ,it is just simple scenario like file to proxy upto one hour back it is working fine suddenly it is showing below error plz give me the reply im in production suport
Error: com.sap.engine.services.jndi.persistent.exceptions.NamingException: Exception during lookup operation of object with name localejbs/ModuleProcessorBean, cannot resolve object reference. [Root exception is javax.naming.NamingException: Error occurs while the EJB Object Factory trying to resolve JNDI reference Reference Class Name: Type: clientAppName Content: sap.com/com.sap.aii.af.app Type: interfaceType Content: local Type: ejb-link Content: ModuleProcessorBean Type: jndi-name Content: ModuleProcessorBean Type: local-home Content: com.sap.aii.af.lib.mp.processor.ModuleProcessorLocalHome Type: local Content: com.sap.aii.af.lib.mp.processor.ModuleProcessorLocal com.sap.engine.services.ejb3.runtime.impl.refmatcher.EJBResolvingException: Cannot start applicationsap.com/com.sap.aii.af.app; nested exception is: java.rmi.RemoteException: [ERROR CODE DPL.DS.6125] Error occurred while starting application locally and wait.; nested exception is: com.sap.engine.services.deploy.exceptions.ServerDeploymentException: [ERROR CODE DPL.DS.5106] The application [sap.com/com.sap.aii.af.app] will not be started, because of the server state is [STARTING]. at com.sap.engine.services.ejb3.runtime.impl.DefaultContainerRepository.startApp(DefaultContainerRepository.java:315) at com.sap.engine.services.ejb3.runtime.impl.DefaultContainerRepository.getEnterpriseBeanContainer(DefaultContainerRepository.java:106) at com.sap.engine.services.ejb3.runtime.impl.DefaultRemoteObjectFactory.resolveReference(DefaultRemoteObjectFactory.java:55) at com.sap.engine.services.ejb3.runtime.impl.EJBObjectFactory.getObjectInstance(EJBObjectFactory.java:144) at com.sap.engine.services.ejb3.runtime.impl.EJBObjectFactory.getObjectInstance(EJBObjectFactory.java:63) at com.sap.engine.system.naming.provider.ObjectFactoryBuilderImpl._getObjectInstance(ObjectFactoryBuilderImpl.java:77) at com.sap.engine.system.naming.provider.ObjectFactoryBuilderImpl.access$100(ObjectFactoryBuilderImpl.java:33) at com.sap.engine.system.naming.provider.ObjectFactoryBuilderImpl$DispatchObjectFactory.getObjectInstance(ObjectFactoryBuilderImpl.java:228) at javax.naming.spi.NamingManager.getObjectInstance(NamingManager.java:283) at com.sap.engine.services.jndi.implclient.ClientContext.lookup(ClientContext.java:394) at com.sap.engine.services.jndi.implclient.OffsetClientContext.lookup(OffsetClientContext.java:223) at com.sap.engine.services.jndi.implclient.OffsetClientContext.lookup(OffsetClientContext.java:242) at javax.naming.InitialContext.lookup(InitialContext.java:351) at javax.naming.InitialContext.lookup(InitialContext.java:351) at com.sap.aii.af.lib.util.ejb.FastEjbFactory.createEjbInstance(FastEjbFactory.java:83) at com.sap.aii.af.lib.util.ejb.FastEjbFactory.createEjbInstance(FastEjbFactory.java:51) at com.sap.aii.adapter.file.File2XI.send(File2XI.java:3451) at com.sap.aii.adapter.file.File2XI.processFileList(File2XI.java:1332) at com.sap.aii.adapter.file.File2XI.invoke(File2XI.java:622) at com.sap.aii.af.lib.scheduler.JobBroker$Worker.run(JobBroker.java:500) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:182) at com.sap.engine.core.thread.impl3.SingleThread.run

Hi Thank for your reply Nbendu and sorry for late reply .
My issue was now resolved but i want to know why this is happend i am getting this issue when ever there is any Basis maintaenance Happens.
If it is due to Basis maintnance then with same combination we have 2 more interfaces is there it is not affecting the other .
Any thoughts.
Regards
Madhu

FILE sender, error mapping

Similar Messages

Maybe you are looking for