File server resource manager. Block file types based on size

I have a site where our users appear to be saving some pretty huge TV quality video files (usually .MOV, and usually over 900MB in size) to our file storage server.  The
concern I have is that such large files are going to fill up our server we will run out of space .
I don't want to blanket block smaller (less than 30MB) .MOV video files from being saved
to the drive, so would like to know if there's any feature in the File server resource manager that can block file type based on size.
If it's not possible, then could someone please suggest this as a future feature of FSRM as I'm sure there are plenty of companies out there who face the same problem as me.
thanks,
Mike Geileskey
Infrastructure manager, PIAS UK Limited 

Hi,
We could not block file types based on size by using FSRM. As a workaround you could use disk quotas on NTFS Volumes which are tracked on a per-user. 
To apply disk quotas to existing volume users, add new quota entries in the Quota Entries window. Please understand that it will take you some time to add all users into the list. 
It will allow administrators to control the amount of data that each user can store on an NTFS file system volume.
For more detailed information about disk quotas on NTFS Volumes, you could refer to the article below:
File Systems
http://technet.microsoft.com/en-us/library/cc938945.aspx
Best Regards,
Mandy 
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

  • Unable to add File Server Resource Manager Tools on Windows Server 2012 - Errors on restart and roll back install

    Unable to install Windows Server 2012 Feature -  [Tools] File Server Resource Manager Tools.
    Installs, however when I restart the server error messages appears saying feature unable to install, windows reverting changes.
    In the Setup event logs have the following information message "Update FSRM-Infrastructure of package FSRM-All failed to be turned on. Status: 0x800f0922"
    Does anyone have any idea's on why this Feature can not be installed ??
    Scott

    Hi Shaun
    Tried both of your suggestions, however neither strategy worked.
    Strategy 1
    Tried installing via powershell - "install-windowsfeature -name fs-resource-manager -includemanagementtools"   
    Feature un-installed itself during the restart.
    Attempted to use the command "DISM /online /remove-feature /featurename:FSRM-Infrastructure-Services".  However
    this did work because one the Service was'nt installed or two because there was no command option for "/remove-feature"
    PACKAGE SERVICING COMMANDS:
      /Add-Package            - Adds packages to the image.
      /Remove-Package         - Removes packages from the image.
      /Enable-Feature         - Enables a specific feature in the image.
      /Disable-Feature        - Disables a specific feature in the image.
      /Get-Packages           - Displays information about all packages in the image.
      /Get-PackageInfo        - Displays information about a specific package.
      /Get-Features           - Displays information about all features in a package.
      /Get-FeatureInfo        - Displays information about a specific feature.
      /Cleanup-Image          - Performs cleanup and recovery operations on the image.
    Strategy 2
    Tried installing via powershell, using the following command DISM
    /online /enable-feature /featurename:FSRM-Infrastructure-Services, however got the same result, the install backed out during the restart.
    All up back to where I started?

  • File Server Resource Manager 2012 - Fails to generate storage report - Event ID: 8242 and 602

    Installed file server resource manager roll on new 2012 file server.   When I attempt to run a dup report on the local volume, I received an error message: "the report generation task failed with the following errors: Error generating report
    job with task name".  "
    Event ID 8242 and 602 are logged in the event viewer.
    Log Name:      Application
    Source:        SRMSVC
    Date:          6/24/2013 11:11:03 AM
    Event ID:      8242
    Task Category: None
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Computer:      xxxxxxxxxxxxxxxxx
    Description:
    Reporting or classification consumer '' has failed.
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="SRMSVC" />
        <EventID Qualifiers="32772">8242</EventID>
        <Level>2</Level>
        <Task>0</Task>
        <Keywords>0x80000000000000</Keywords>
        <TimeCreated SystemTime="2013-06-24T16:11:03.000000000Z" />
        <EventRecordID>1276</EventRecordID>
        <Channel>Application</Channel>
        <Computer>xxxxxxxxxx</Computer>
        <Security />
      </System>
      <EventData>
        <Data>
        </Data>
        <Data>
    Error-specific details:
       Error: (0x80131501) Unknown error</Data>
        <Binary>2D20436F64653A20434E534D4D4F444330303030303234332D2043616C6C3A20434E534D4D4F444330303030303231322D205049443A202030303030333036302D205449443A202030303030333734382D20434D443A2020433A5C57696E646F77735C73797374656D33325C73726D686F73742E657865202D20557365723A204E616D653A204E5420415554484F524954595C53595354454D2C205349443A532D312D352D313820</Binary>
      </EventData>
    </Event>
    Log Name:      Application
    Source:        SRMREPORTS
    Date:          6/24/2013 11:11:03 AM
    Event ID:      602
    Task Category: None
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Computer:      xxxxxxxxxxxxxxxxxxxx
    Description:
    Error generating report job with the task name ''.
    Context:
     - Exception encountered = System error.
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="SRMREPORTS" />
        <EventID Qualifiers="0">602</EventID>
        <Level>2</Level>
        <Task>0</Task>
        <Keywords>0x80000000000000</Keywords>
        <TimeCreated SystemTime="2013-06-24T16:11:03.000000000Z" />
        <EventRecordID>1277</EventRecordID>
        <Channel>Application</Channel>
        <Computer>xxxxxx</Computer>
        <Security />
      </System>
      <EventData>
        <Data>Error generating report job with the task name ''.
    Context:
     - Exception encountered = System error.
    </Data>
      </EventData>
    </Event>
    When I click on schedule a new report task, I get an error "Class not registered".
    nada

    Hi,
    When we schedule a new job, we add a scheduled task to the c:\windows\tasks folder.
    The scheduled task will contain the following command line
    "c:\WINDOWS\system32\storrept.exe reports generate /scheduled /Task:"FSRM_Report_Task{GUID.......}"
    There is also a folder on the system drive
    C:\StorageReports\Scheduled
    We Also store information in the system volume information folder in the following files:
    c:\system Volume Information\SRM\Settings\ReportSettings.xml (we use .old and .alt extentions}
    c:\system Volume Information\SRM\reports\reportX.xml (where X = an incrementing number set, in writing to these files, we also use .old and .alt extentions}
    When experiencing issues relating to scheduled report jobs, you will want to examine these files and check for NTFS permissions issues on these locations also.
    Make sure you check the volume that you will be running the report on.
    TechNet Subscriber Support in forum |If you have any feedback on our support, please contact [email protected]

  • File Server Resource Manager will not load WMI Objects on Windows 8.0/8.1 Preview with Hyper-V and Server Tools Loaded

    Hi Folks,
    I have a problem getting "File Server Resource Manager" to start properly because WMI objects are not loading??? I don't understand this at all because I am able to access them with other Apps, etc. I have been over my Services list as well but
    have not yet discovered which Service turns on/off "File Server Resource Manager". I have looked in Windows\System32\ and I can not find SrmSvc. I found other Srm's there though. I also found the FSRM Snapin which generates the Figure below but I
    can not find it in the WMI Browser. I believe the Firewall is OKAY since I have been over that thoroughly. I do have the Server Tools Installed for Windows 8.0 or Windows 8.1 Clients as well as the Windows Updates applied, which is where I got "File Server
    Resource Manager" in the first place. I have had WMI and Powershell 3.0 Package, installed since Windows 7 but I run a repair on them anyway.
    I have read through "File Server Resource Manager could not load WMI objects on Windows Server 2012
    Article ID: 2831687" but since I don't seem to have SrmSvc the solution doesn't help me. I haven't been able to find a similar one for the Windows Client.
    If there is anything you could share on this problem I would be much obliged.
    Thanks again,
    Crysta
    PhotM Phantom of the Mobile

    Hello,
    The Windows Desktop Perfmon and Diagnostic tools forum is to discuss performance monitor (perfmon), resource monitor (resmon), and task manager, focusing on HOW-TO, Errors/Problems, and usage scenarios.
    As the question is off topic here, I am moving it to the
    Where is the Forum... forum.
    Karl
    When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
    My Blog: Unlock PowerShell
    My Book:
    Windows PowerShell 2.0 Bible
    My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

  • How to use quota on a desktop folder for all users with File Server Resource Manager.

    Hi there,
    I'd like to know if there is a posibility to use variables in the path with File Server Resource Manager if you want to set the quota.
    The path I'd like to use is d:\home\%username%\desktop.
    Like to hear from you all if there is a solution or workaround for this one :)
    Thanks for your time.
    Ben.
    Ben van der Meer

    That's a question about Automator, so I'd pop that one here
    http://discussions.apple.com/forum.jspa?forumID=1339
    Regards
    TD

  • File Server Resources Manager not sending emails

    Appears that the SMTP settings are not being set correctly via FSRM.  Using 2012 R2
    I get the below error in the event log when I try to configure them (via options/email notifications tab).  If I click the 'send test email' button I get the test email which tells me my SMTP server is fine.  Seems like I'm getting an access
    denied message whenever I try to save the SMTP settings.  I already tried restarting the server as well as running the FSRM console using the 'run as admin' command.
    Source:  SRMSVC
    EventID:  16401
    The following access-denied assistance error configuration was modified:
    Error: 5
    Enabled: FALSE
    Client Display Flags:
    Error Message: This can occur if you don't have permission to access the file or folder, or if your computer doesn't meet security policy requirements.
    Message from the administrator of the file server:
    - Ask your manager if you're in the right security groups
    - For troubleshooting information, go to <a href="http://support.microsoft.com">Microsoft Support</a>
    If you need more help, click Request assistance.
    Email Flags: Put data owner on TO line, Put administrator on TO line, Include device claims, Include user information, Generate an event log when sending mail
    Additional To Emails:
    Email Message: For general support, contact: [Provide email address]
    For share permissions support, contact: [Provide email address]

    Hi,
    Please try to assign the "Send-as" permission from the adsiedit.msc to the user account.
    Is the SMTP server hosted on an Exchange server? If so, I suggest you ask for help from Exchange forums for better and accurate answer to the question.
    http://social.technet.microsoft.com/Forums/exchange/en-US/home?forum=exchangesvrdeploylegacy
    Regards,
    Mandy
    If you have any feedback on our support, please click
    here .
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • How to Expire Large Files using File Server Resource Manager

    Is there a way to expire Large Files over 2GB that have not been accessed in 2 years.
    I see under the File expiration options that I can expire files that have not been Created, Modified, or Accessed for a certain amount of time.
    Thanks,
    Eddie

    Hi Eddie,
    FSRM can help report large files and also can help move old files to a folder, but I did not found a way to combine them in a single process.
    Instead how about using Robocopy?
    You can run robocopy /min:xxx /minlad:xxx <source> <target>.
    /MIN:n :: MINimum file size - exclude files smaller than n bytes.
    /MINLAD:n :: MINimum Last Access Date - exclude files used since n.
    (If n < 1900 then n = n days, else n = YYYYMMDD date).
    Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Replace a 2003 (not R2) File Server with a 2012R2 files server and preferably keep the same machine name and IP when finished

    I am wanting to replace a 2003 (not R2) File Server with a 2012R2 file server and preferably keep the same machine name and IP when finished.  For the moment I just need some "high level" guidance, little details can be worked out once I know
    which direction I will go.  I was considering that DFS might be a way to help get through the process although when finished the 2012R2 Files server will be by itself with no other file server planned at this time.  DFS can stay installed for maybe
    future purposes but clearly I wouldn't need the DFS Replication with only one machine.
    Here's a few details of the environment....
    1.  DC's are 2012R2 but it is still 2003 DFL because the old 2003 DCs are still present.  But likely they will be gone and the DFL elevated before I start on the File Server project
    2. Nearly all machines in the facility have a shortcut on the "All Users" Desktop that points to the existing old File Server.  Editing or replacing that shortcut would be a major pain,...hence why I want to keep the same machine name at least,
    and maybe the same IP if not too much trouble.  This way the existing shortcut would continue to work with the new 2012R2 File Server.  The UNC path represented in that shortcut is also configured into one or more of our major business applications,
    futher emphasizing the need to keep the UNC path the same throughout the process.
    3. The facility runs 24/7/365 but is "light" on weekends.  The political environment is such that there is little to no tolerance for any down time at all.
    4. Would DFS (based from the 2012R2 machine) be a good tool to get where I need to go?
    Thanks for any suggestions.
    Phillip Windell

    Hi Sharon,
    I've done some more reading and have a few new ideas to run past you....
    Yes regular DFS wouldn't help and the Namespace would still be different than how it was with just the old server. However I was thinking DFS Replication could replace the purpose of RoboCopy and it would keep the two locations "in sync" until I was ready
    to flip over to the new server.  DFS Rep can exist independently of a DFS Namespace, so a Namespace is not even needed. It needs a minimum of 2003R2 for the "later & better" DFS Rep but I believe 2003 can do an "in place" upgrade to 2003R2, so I would upgrade
    the old server to 2003R2 first.  As long as the DFS Rep on 2012R2 and 2003R2 will properly interact I think that will work.
    Thanks for the reg info on the Shares.  I'm debating if editing that would reg file would really be much better than manually creating the Shares on the new server while the DFS Replication was doing its job.  I'll probably export that Key as a
    safety move whether I use it or not.
    Once the DFS Rep is fully in sync and the Shares are in place on the new server, I figure I would then:
    1. Remove the DFS Replication Object (optionally remove DFS Services completely)
    2. Rename the old File Server to something else and set it to DHCP
    3. Rename the new File Server to the name I want to use and give it the IP the old server had.
    How does that sound?
    Phillip Windell

  • Backing up Local File Server to a remote File Server - Best way?

    Hi all,
    I am building a project for my University Dissertation which is based on the implementation of an ISO 27000 compliant virtualised environment.
    I have three sites ( offices ) each with their own local file server, that i would like to back up every 24 hours to remote primary data centre.
    The primary data centre will be based in office 1, and the secondary data centre will be based in office 3.
    As this is only a project, and not a real life implementation, all the machines sit on the same network, running on the same physical host, but i need to show the process of backing up the 'local' file servers to the 'remote' ones. Each site will have its
    own file server in the data centre.
    every 24 hours, the primary data centre will backup the data to the secondary data centre ( this is so i can introduce the idea of business continuity into the project). 
    Is anybody able to direct me in the right direction for backing up my local servers to a remote server?
    Below is my high level diagram, that illustrates what i am doing. 
    Many thanks in advance
    Aaron

    One way that I have seen many organizations implement is to simply install Microsoft Distributed File System.  You can set up a hub and spoke configuration where the 'master' copies are in the hub location from which you want to backup.  Then any
    place the needs copies is a spoke off the hub.
    Another possibility would be to use Microsoft's BranchCache capability.
    Either one is part of the operating system.  I can't say specifically which would work better for your situation without getting more detail.
    .:|:.:|:. tim

  • Not Using Index on File Server When Accessing User Files Directly on Server

    It appears to me that on a server with an indexed network share (Desktop Experience and Search Indexing roles/features installed), if you access the share directly on the server using its drive path, you can search the folders using the index, which
    is much faster and supports finding words inside of the files in seconds). However, if you access the same shared folder via its network path from the server itself, the server ignores the index. I have this experience/problem across all shared folders on
    the Windows 2012 R2 Server. Details and my most specific goal follows.
    In addition to a laptop, I frequently work directly on a Windows Server 2012 R2 computer. We have Redirected Folders set up on DFS (for failover redundancy) so that my Documents folder is in:
    \\network\redirections\user\documents. This all works fine on Windows 7 and 8 client computers connected to the network via Offline Files.
    The problem is on the server itself. The server has Desktop Experience enabled and Windows Search is installed. If I navigate manually through the DFS root folder to my documents folder, I can search and it properly uses the index. This proves the location
    is properly indexed. However, if I access the folders through the official "Documents" folder from the Folder Redirection (a network share pointing to the same server computer I'm working on), it performs an un-indexed search (slow and ignores file
    contents, but does find files eventually if the search term is in their filename). Is there a way to force the server to use the indexed search on the Redirected Folders (my Documents folder in particular) when working on that server when logged in locally
    on that server?
    I suspect a workaround would be to go into the Registry and manually change the HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Shell Folders to point to the local DFS folder instead of the network share name, but at least one problem
    with this is then if I save files with links to other files (e.g., a linked Excel table in a PowerPoint, a mail merge to Access database in Word, etc.) on the server computer, those links will point to d:\DFSroot\... (a physical drive on the computer) instead
    of \\network\redirections\user\... (a universally accessible network path) and so none of the other computers will be able to find the linked files, defeating one of the
    major benefits of using Redirected Folders.
    I can't believe that I need to choose between indexed searching and proper path names in saved files. Surely there is a way to use an indexed search on the server itself?
    If you need any more info to help me troubleshoot, please let me know.
    Thanks for any help,
    Colin

    Hi Colin,
    It seems that we can not use indexed search on DFS shares. Windows Search works well when users directly access the server. That is, the server is not made available through Distributed File System (DFS).
    For more detailed information, you could refer to the links below:
    Windows Search Service, Clustered File Services, DFS, Win7 Libraries
    https://social.technet.microsoft.com/Forums/windowsserver/en-US/31ac4c16-948b-4ca4-b18f-3a339cdfd5b9/windows-search-service-clustered-file-services-dfs-win7-libraries?forum=winserverfiles
    Windows Browse and Organize Features
    https://technet.microsoft.com/en-us/library/dd744693(WS.10).aspx
    Best Regards,
    Mandy 
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • File server migration with Offline files involved

    Hi,
    We are planning a file server migration in following weeks.
    This morning, our customer came with the good old "Ow, and I just thought about something else"
    Here's the scenario :
    -They are using 1 network drive
    -That network drive is made offline available for all laptop users
    -Those users are spread out in several country's. No VPN connection
    -They are working for months on their offline network drive, right in the middle of the wood, no internet connection, it was already short for them to find power supply for their laptop ...
    ...nevermind
    -The day they come back to the office, the file server to which points the network drives will be offline.
    Now the 1 Million question : What happens with their "dirty" files ?
    yep exactly. those they changed 6 months ago, have no clue about if you ask them but certainly will the day I will clear the damn cache.
    My first analysis :
    -The new file server will have another name, no alias or re-using the old name is possible (the customer don't want to)
    -I can't tell to those laptops "hey for that offline cache, please use this new network drive"
    So :
    >> Those users have to identify manually files they changed while being offline, copy them locally on their machine and work that way the time they come back to the main office.
    >> When they finally show up, clear the cache, offline the new network drive and replace file copied locally
    >> If no internet connexion available in the branch office, let them work locally, it's still better than this hybrid-non-sense 6month offline folder "solution". If internet connexion is mainly available remotely, propose some Citrix/View/RDS
    Setup which is, for me, a more professional looking solution
    Someone has another (better?) idea/solution ?

    Hi, 
    I suggest you ask users to collect their laptop to internet, then start offline files synchronization on the old file server. After that, use
    Robocopy to copy the date from the old server to the new server. As the offline files cache cannot be recognized by the new file server, so we need to synchronize data first.
    If the older server cannot be enabled, as you mentioned, you might need to ask users to copy their changed files to the new file servers.
    Regards, 
    Mandy
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Migrating single file server to failover cluster file server

    Hi,
    Currently we have one file server which is our Domain controller also. File Server data stored in SAN storage lun. Users home folders also resides at file server.Now we want to create 2 node failover cluster file server.
    Questions:
    1)Can we assign same storage lun to failover cluster?
    2)Do we need to assign all permissions and storage quota again?
    What is the best option to achieve this goal.                                                                            

    Hi,
    if you attach the same LUN to the failover cluster the NTFS permission (security tab) are retained because they are stored in the LUN itself
    Share permission are lost because they are stored in the registry of the file server. If you have few share with a simple share permission structure, simply recreate them in the cluster. If you have a lot of shares and complex permission tree, you have to
    export registry hives related to lanmanserver\shares

  • CS5 opening file from file server through explorer gets file not found error

    Hi There,
    Has anyone come across an issue with CS5 where they open an ai file through Windows Explorer and gets an error file not found after CS5 has started? Opening through CS5's file > open option does not produce the same error and seems to only error when opening by double clicking on the ai file. Is this a possible issue with shellex open handler registry key?
    Any help would be greatly appreciated.

    Opening files directly from the server can produce errors and damage files. It is generally not advised.
    http://kb2.adobe.com/cps/327/327749.html

  • Event 12317 every minute... File Server

    Hello,
    I am getting the following error every minute on the File Server Cluster node B
    Log Name: Application
    Source: SRMSVC
    Date: 2/20/2015 10:35:13 AM
    Event ID: 12317
    Task Category: None
    Level: Warning
    Keywords: Classic
    User: N/A
    Computer: BOPFSCL1A.ad
    Description:
    File Server Resource Manager failed to enumerate share paths or DFS paths. Mappings from local file paths to share and DFS paths may be incomplete or temporarily unavailable. FSRM will retry the operation at a later time.
    Error-specific details:
    Error: NetShareEnum, 0x80070005, Access is denied.
    I have checked the blog:
    http://blogs.technet.com/b/filecab/archive/2006/09/29/459430.aspx
    Even the Authenticated Users Group was already in the Users Group for th BuiltIn Folder in AD I have restarted the srmsvc and srmreports ...
    But still the error 12317 is poping up...
    Any idea?
    Thanks,
    DOm
    System Center Operations Manager 2007 / System Center Configuration Manager 2007 R2 / Forefront Client Security / Forefront Identity Manager

    Hi Dom,
    How are things going? Please let us know if there is any progress or any new error occurs. 
    Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]
    Still having the issue and even on another cluster now...
    https://social.technet.microsoft.com/Forums/windowsserver/en-US/a07def79-50aa-4883-96e5-50d4cddd8d9a/cluster-nodes-loosing-communication?forum=winserverClustering
    Any clue?
    Thanks,
    Dom
    System Center Operations Manager 2007 / System Center Configuration Manager 2007 R2 / Forefront Client Security / Forefront Identity Manager

  • Server 2012 R2 File Server Stops Responding

    Hi,
    I am facing one problem with my Windows Server 2012 R2 Ent Edition,
    Some times file server stops working, I have checked everything is working fine and also can take the RDP but not able to access the shared drive.
    I have restart the below services:
    DFS Name Space
    File Server Resource Manager
    Netlogon
    RPC
    TCP/IP Net Bios Helper
    Network Share Interface Service
    Server
    But finally we need to restart the server then after that problem is sort-out, 
    Thanks
    Arora, Jitender

    Hi
    Can you also check the log files for errors? What does event viewer indicate?
    Try updating the drivers as well on the server.
    Hope this helps. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Maybe you are looking for

  • I need clarification on buisness objects

    Hi I am new to the Business objects , i have some doubts on business objects , Please Clarify on this My Architecture is   SAP R/3  SAP BI  SAP BO  Business Objects are using to design reports 1.What is the use of SAP integration Kit 2.If I use sta

  • Details abut lightroom 3.6

    Hi I have Lightroom 3.6 and all the time that I make  inport to photo with  white background , It takes 2 sec and the color  background is change to gray, and also the pic in more dark. Details In the camera  I shooting in raw ,  and after design on

  • Schema customization

    hello, I have one messaging server running with customized schema with some object classes and attributes. I am preparing a new server. How could I get that scheam to the new server. What are the complete steps for this. Do i require to only copy the

  • TRIP_EWT

    Hi, I am wondering if someone now how to modify TRIP_EWT. I would like to delete the "Change Approved Travel Expense Report" so the employed only could Display the trips. I am also thinking of deleting the "Create Travel Expense Report ... With Ref."

  • Consuming BO Web Services in Classic ASP

    Hi,     As per Client's requirement, we need to use BO Web Services in Classic ASP instead of in ASP.NET.     So, if anybody had tried the above thing then it will be great if he/she can tell us how to do it ?     Thanks in advance.