File/Storage Errors in Server 2012

Hi
We are running Server 2012 (proper, downloaded from licensing portal) and are using it as an NFS server for some of our VM Ware machines.
Yesterday the NFS storage went offline for approx. 15 minutes, and then came back online.  The following errors are found in Event Viewer, these errors appear to have been happening since 21/08 but this the first time the NFS server has gone offline.
This error is found in the Applications Log:
File Server Resource Manager finished syncing claims from Active Directory and encountered errors during the sync (0x80072030, There is no such object on the server.
).  Please check previous event logs for details.
And is accompanied by this error:
File Server Resource Manager failed to find the claim list 'Global Resource Property List' in Active Directory (ADsPath:
LDAP://mydc.mydomain.local/CN=Global Resource Property List,CN=Resource Property Lists,CN=Claims Configuration,CN=Services,CN=Configuration,DC=mydc,DC=local). Please check that the claims list configured for
this machine in Group Policy exists in Active Directory.
Additionally the following error appears in the System log, but not at the same time as the above:
The Group Policy Client Side Extension Folder Redirection was unable to apply one or more settings because the changes must be processed before system startup or user logon. The system will wait for Group Policy processing to finish completely before
the next startup or logon for this user, and this may result in slow startup and boot performance.
Our PDC is Server 2003 R2, we have a 2008R2 DC and the 2012 server seems to be authenticating with this DC.  There are no errors on that DC.
Any help appreciated.
Many thanks

I thing the following site gives a solution:
It is a schema problem...
Event ID 12339 and 12344: File Server Resource Manager failed to find claim list
Problem: You are running a Windows Server 2012 file server and you see the error messages in your logs every 15 minutes or so.
1) Event ID: 12339
File Server Resource  Manager failed to find the claim list 'Global Resource Property List' in Active Directory (ADsPath: LDAP://dc1.domain.local/CN=Global Resource Property List,CN=Resource Property Lists,CN=Claims Configuration,CN=Services,CN=Configuration,DC=domain,DC=local). 
Please check that the claims list configured for this machine in Group Policy exists in Active Directory.
2) Event ID: 12344
File Server Resource  Manager finished syncing claims from Active Directory and encountered errors during the sync (0x80072030, There is no such object on the server.) Please check previous event logs for details.
Solution: You can either upgrade the Active Directory schema to version 56 (Windows Server 2012) or safely ignore the error messages.
If you can update the schema of your domain. Follow these steps:
1)
log on to Windows Server 2012 as Administrator of your domain
2)
Copy from "support \adprep" in the media of Windows Server 2012 to "c:\"
3)
run this command
c:\adprep\adprep.exe /forestprep
THANKS to KIM HELLMAN
Search for kim hellman blogspot and the error message

Similar Messages

  • Log error "Could not load file or assembly 'BarcodeConversion' or one of its dependencies. Access is denied. This code work fine in server 2008 but get this error in server 2012

    This code work fine in server 2008, but get this error in server 2012.  Do yo have any idea?

    Need some more info as to where this is installed and how.
    First thing to try would be to uninstall the solution and reinstall.
    Check the GAC for your assembly as well as web.config.
    If you don't see it in one of those places, something went wrong with the install and you'll need to start over.
    Brandon James SharePoint Developer/Administrator

  • Bare metal restore of full server backup fails with RPC error 0x800706BA (server 2012)

    With Windows Server 2012, after creating a successful windows server backup (full server), I am unable to do a bare metal restore of the system.
    EFI System Partition, C:, D: are the volumes on a single array (Raid 5).
    Loading WinRE and launching re-image, the full server restore stops after completing the C: restore just after beginning the D: drive restore (data volume) with the error with the message about RPC error 0x800706BA, unavailable.
    The system will not boot as a result of the failure. 
    What may be causing this?
    [edit]
    I think I have two things working against me here... one, Volume Shadow Copy service wasn't running in WinPE and two.. the D: volume contains data deduplication.
    I think this is causing some of my problems.
    Is there an additional service that I need to start in WinPE to get a volume that was deduplicated restored perhaps using wbadmin?

    Hi,
    Thanks for the reply Shaon.
    The hardware system is identical; however, I am increasing storage capacity from 12TB to 16TB.  Basically, the system is the same, just new hard drives (4x4TB versus 4x3TB).  Drives are all identical enterprise class drives and I am actually using
    the same system (backup, swap drives then restore).
    I tried both using the WinRE restore (re-image) with the backup set, and tried using wbadmin.  Both produce same RPC unavailable messages (although using the GUI based tool via WinRE provides the additional error code #).
    I do not have any idea what to look at to try to figure this one out.
    [edit]
    I was just informed of this posting:
    http://social.technet.microsoft.com/Forums/windowsserver/en-US/147efccc-e0e9-4458-852e-c3a44ae5cb64/the-system-image-restore-failed-error-details-he-rpc-server-is-unavailable-0x800706ba?forum=windowsbackup
    and in my case, this lab server does in fact act also as a DC as well as a file server...  do I need to spin up a secondary controller (perhaps in a VM on another machine) to do this restore?

  • Ssis - import data from flat file to table (sql server 2012)

    i have create a ssis for importing data from flat file to table in sql server 2012.
    but i got the below error for some column in data flow task.
    error: cannot processed because than one code page (950 and 1252)
    anyone helps~

    Hi,
    The issue occurs because the source flat file uses ANSI/OEM – Tranditional Chinese Big5 encoding. When processing the source file, the flat file connection manager uses code page 950 for the columns. Because SQL Server uses code page to perform conversions
    between non-Unicode data and Unicode data, the data in the code page 950 based input columns cannot be loaded to code page 1252 based destination columns. To resolve the issue, you need to load the data into a SQL Server destination table that includes Unicode
    columns (nchar or nvarchar), and convert the input columns to Unicode columns via Data Conversion or the Advanced Editor for the Flat File Source at the same time.
    Another option that may not be that practical is to create a new database based on the Chinese_Taiwan_Stroke_BIN collation, and load the data to non-Unicode columns directly.
    Reference:
    http://social.technet.microsoft.com/Forums/windows/en-US/f939e3ba-a47e-43b9-88c3-c94bdfb7da58/forum-faq-how-to-fix-the-error-the-column-xx-cannot-be-processed-because-more-than-one-code-page?forum=sqlintegrationservices 
    Regards,
    Mike Yin
    TechNet Community Support

  • Continued DCOM Errors on Server 2012

    We started noticing this error reoccurring after I set up a Powershell routine that sends daily emails to us with the errors from the systems Event Viewer log.  At first it was once or two a day and today it was 5 yesterday it was 7.  We are constantly
    getting the follow error on our 2012 server:
    The description for Event ID '10010' in Source 'DCOM' cannot be found. The local computer may not have the necessary registry information or message DLL files to display the message, or you may not have permission to access them. The following information
    is part of the event:
    '{73E709EA-5D93-4B2E-BBB0-99B7938DA9E4}'
    When I use a Powershell routine that returns information about all the DCOM's I get this:
    Application ID:  {73E709EA-5D93-4B2E-BBB0-99B7938DA9E4}
    Caption:  Microsoft WMI Provider Subsystem Host
    Description:  Microsoft WMI Provider Subsystem Host
    Installation Date:
    Name:  Microsoft WMI Provider Subsystem Host
    Status:
    So Powershell script says it says it is there.  Then how can we get the error message that the DCOM cannot be found? We have ran a malware program on the server and come up with nothing.  Checked the registry key and everything there seems to be
    set correctly.  Checked for server updates and there are none.  Checked for Firmware updates (Dell PowerEdge Server) and nothing there either.
    Of the 10 or so servers we have, this one with Server 2012 on it is the only one that giving us these errors, or any errors (not including Terminal Service errors), and we would like to find out what the problem is and correct it. 
    Thank you for any suggestions.
    Mark

    I am still getting these errors more than 10 times a day during the week but hardly any on the weekends.
    Server
    Event Time
    Type
    EventID
    Source
    Message
    VOLCANO
    08/27/2014 07:54:11
    Error
    10010
    DCOM
    The description for Event ID '10010' in Source 'DCOM' cannot be found. The local computer may not have the necessary registry information or message DLL files to display
    the message, or you may not have permission to access them. The following information is part of the event:'{73E709EA-5D93-4B2E-BBB0-99B7938DA9E4}'
    I had changed the power settings to every 5 hours which should have only given me 5 or 6 a day but I was getting as many as 15.  Hard Drives were set to not power down. So I am not sure that the 'Sleep' suggestion in the one article is correct. But
    this morning I went and put the power setting to never for the display.
    Any other suggestions? 

  • SQL Server 2012 Install Errors on Server 2012

    I am getting an error when installed a new copy of Microsoft SQL Server 2012 Service Pack 1 on a newly created Server 2012 that has all its updates.  About 90% of the way through the installation this is the error I received below:
    TITLE: Microsoft SQL Server 2012 Service Pack 1 Setup
    The following error has occurred:
    Attempted to perform an unauthorized operation.
    Click 'Retry' to retry the failed action, or click 'Cancel' to cancel this action and continue setup.
    For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft%20SQL%20Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xDC112D1C%25400xBB814387
    Second Error when continuing: 
    TITLE: Microsoft SQL Server 2012 Service Pack 1 Setup
    The following error has occurred:
    A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
    Click 'Retry' to retry the failed action, or click 'Cancel' to cancel this action and continue setup.
    For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft%20SQL%20Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xBA6E21AA%25400x9A41B222
    I clicked cancel on both errors but I don't know if this will impact my application. After the installation completes I can see everything passed except the Database Engine. Any thoughts on this issue?

    Hello,
    If this is a VMware machine, please read the following article:
    http://support.microsoft.com/kb/2799534
    If the above is not the case please share the Detail.txt log file with us. The following article may help you locate the file on disk:
    http://msdn.microsoft.com/en-us/library/ms143702(v=sql.110).aspx
    Hope this helps.
    Regards,
    Alberto Morillo
    SQLCoffee.com

  • Server Manager Error, Windows Server 2012 Standed

    Windows
    Server 2012 on my desktop
    and I've been in it then
    open Server Manager "ServerManager.exe - This application could not be started"
    error this time. In it,
    the option is YES and
    NO. YES is open
    to the side of .net.
    Please help me as soon as possible.

    Hi,
    Please check the event viewer to get more detailed error information about this issue.
    You can also remotely access it from another server by adding this server in the server manager of the remote server, and try to access the roles and features from the remote server, and tackle the problem from there.
    I hope this helps.

  • Can't download files on Android from Server 2012 Essentials Remote Web Access

    I have two servers, one with Windows Server 2012 Essentials, and the other SBS 2011.  Employees like using Remote Web Access to log in from anywhere and have access to shared folders.  It works perfect on a Desktop computer, but when they try to
    use their Android tablets or phones, and want to download a file (e.g. a PDF) from one of the shared folders on the server, the download fails.   When Microsoft was pushing 2012 they said RWA worked great on mobile devices, do I have to set up something
    separately to make this happen?
    I've completely disabled the firewall, and have ports 80,443,987, and 1723(just to be safe) all forwarded to the server.
    I can log into the RWA site on the android, browse files and folders, but when I select a PDF to download, the download shows as if it's starting, shows in my android notification as if its going to start downloading (Shows MobileDownload www.mydomain.com)
    but eventually after a few minutes, will time out and show "Download Unsuccessful".
    Network connectivity is fine as I can do this on a Windows Desktop PC using any browser (Chrome, Firefox, IE) and successfully download anything I want.
    UPDATE:  I found this in the event handler when I tried to download something from a mobile device...
    - System
    - Provider
    [ Name] ASP.NET 4.0.30319.0
    - EventID 1309
    [ Qualifiers] 32768
    Level 3
    Task 3
    Keywords 0x80000000000000
    - TimeCreated
    [ SystemTime] 2014-01-12T16:49:12.000000000Z
    EventRecordID 72818
    Channel Application
    Computer MYSERVER.MYDOMAIN.local
    Security
    - EventData
    3005
    An unhandled exception has occurred.
    1/12/2014 11:49:12 AM
    1/12/2014 4:49:12 PM
    953eedf1ad414391a193e5f98a281da5
    263
    3
    0
    /LM/W3SVC/1/ROOT/Remote-1-130340167702975633
    Full
    /Remote
    C:\Program Files\Windows Server\Bin\WebApps\RemoteAccess\
    MYSERVER
    2592
    w3wp.exe
    NT AUTHORITY\NETWORK SERVICE
    HttpException
    Server cannot set content type after HTTP headers have been sent. at System.Web.HttpResponse.set_ContentType(String value) at System.Web.UI.Page.SetIntrinsics(HttpContext context, Boolean allowAsync) at System.Web.UI.Page.ProcessRequestWithNoAssert(HttpContext context) at System.Web.UI.Page.ProcessRequest(HttpContext context) at Microsoft.WindowsServerSolutions.Web.RemoteAccessSite.RealPageHandler.ProcessRequest(HttpContext context) at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
    https://remote.MYDOMAIN.com:443/Remote/fs/MobileDownload.aspx?path=\\MYSERVER\PICTURES\2013603.jpg
    /Remote/fs/MobileDownload.aspx
    MY.IP.ADDRESS.141
    MYDOMAIN\user
    True
    Forms
    NT AUTHORITY\NETWORK SERVICE
    31
    NT AUTHORITY\NETWORK SERVICE
    False
    at System.Web.HttpResponse.set_ContentType(String value) at System.Web.UI.Page.SetIntrinsics(HttpContext context, Boolean allowAsync) at System.Web.UI.Page.ProcessRequestWithNoAssert(HttpContext context) at System.Web.UI.Page.ProcessRequest(HttpContext context) at Microsoft.WindowsServerSolutions.Web.RemoteAccessSite.RealPageHandler.ProcessRequest(HttpContext context) at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)

    Hi,
    Before going further, would you please let me confirm something firstly?
    Would you please let me know if all Android devices
    encounter this same issue? If you download different type files, will still this issue persists? You can upload a small file (such as a text file) to the share folder, then check if Android device can’t download it.
    Based on your description, when logon a desktop computer, you will download files via RWA successfully. Please use the user account which logon computer to logon
    the Android device, will still fail to download?
    Please check if there has enough free space in Android devices that be used to save download.
    When this issue occurred, please check the state of Android device in Dashboard. Besides, I suggest you should run the Best Practices Analyzer (BPA) and fix all
    it can find. Then monitor the result.
    Run the Windows Server 2012 Essentials Best Practices Analyzer
    http://technet.microsoft.com/en-us/library/jj200181.aspx
    In addition, regarding to the Event ID 1309, please refer to the following articles.
    Event ID: 1309 Source: ASP.NET 4.0.30319.0
    http://www.eventid.net/display-eventid-1309-source-ASP.NET%204.0.30319.0-eventno-11022-phase-1.htm
    Hope this helps.
    Best regards,
    Justin Gu

  • Local Storage in SQL Server 2012 (Fast Track Appliance)

    Hello,
    Before procuring the Microsoft SQL Server 2012 Fast Track Appliance, we require additional information to satisfy the requirements from our infrastructure staff.  What type of data is stored in the local storage?  It seems that the local storage
    may be used for computations functionality only (temporary tables etc?); therefore, the only system backups that we may need to perform are for the main server and spare server which also contains all computation nodes (each SQL Server 2012 instance running
    on virtual machines?).  In fact, we probably don’t need any backups since the spare server provides a fail-over mechanism and allows for our engineers to “repair” any issues on the problem server? Also, If all of our data is already on a separate system
    outside of this data warehouse and can simply be exported back to the PDW system, then perhaps we don’t require backups? We simply use this data warehouse for analysis of the data (query and reporting).  The data collection and maintenance are permanently
    stored on a separate system.
    One last question, if required – could we remove the local storage and replace it with our enterprise SANs? – likely a performance hit; however, may still be better than having to integrate separate hardware components to try to replicate the fast track
    appliance and attempt to tune for performance.  Our infrastructure policy requires the use of enterprise SANs and reduction in local storage (possibly from new data center consolidation policies).
    Thank you for helping us to decide quickly and purchase this Fast Track Appliance expeditiously to meet our rapidly approaching deadline.  I have been unable to find answers to these questions from Microsoft pre-sales and tech support staff (without
    a support contract).
    Thank you,
    Vinh
    703-727-5377

    Hello,
    Thank you for the question.
    If the data in the local storage can be extracted from the PDW again, we don't need to backup them.
    As for the storage replacement, technically speaking, you can replace the local storage with the different SANs. However, if you do so, you will lead the system to a nonsupport scenario.
    Please refer http://msdn.microsoft.com/en-us/library/hh918452.aspx for further information.
    If you cannot determine your answer here or on your own, consider opening a support case with us. Visit this link to see the various support options that are available to better meet your needs:
     http://support.microsoft.com/default.aspx?id=fh;en-us;offerprophone
    Regards,

  • How to export SSIS package to File system in SQL Server 2012

    I am accessing SSIS package by connecting to a database engine. I wanted to export the SSIS to file system. How to get it done in sql server 2012? I tried Util utility , i got package not present. Let me know what other options are available to export to
    file system?
    Mano

    Hi Mano,
    After exporting the project stored in a SSISDB catalog to an .ispac file, we can modify the extension .ispac to .zip, then, we can extract the zip file to get the .dtsx package files. Besides, please note that if there are project level connection managers
    or parameters, their definition cannot be exported to individual packages.
    Regards,
    Mike Yin
    TechNet Community Support

  • Setup closed with exit code: 0x84C40013 - Silent Install error - SQL Server 2012 express management studio SP1

    I am trying to create a silent installation package for SQL Server 2012 Express Management Studio SP1. (both x86 & x64)
    Prior to installation I have performed the following :
    1. Turned ON the Windows feature 'Microsoft .NET Framework 3.5.1' (I had read somewhere on the internet that this is required prior to installation)
    2. Installed Microsoft .NET Framework 4.0
    I am using the following command line to perform an unattended install :
    <EXENAME> /Q /IACCEPTSQLSERVERLICENSETERMS /ACTION=install /FEATURES=Tools 
    However, the installation fails abruptly.
    The application installs successfully with the following command line :
    <EXENAME> /IACCEPTSQLSERVERLICENSETERMS /ACTION=install /FEATURES=Tools
    The error occurs only while attempting to install the application with the /Q switch appended.
    Please help.

    Hello Fanny,
    Thanks for providing the link to the SQL Server 2012 unattended install guide.
    However, I must highlight that I was running the setup.exe with "Run As a Administrator" option and still facing the issue.
    Anyways, I found out the root cause and I must say that it was a rather silly one.
    As I had stated previously, the following command line was causing the issue :
    <EXENAME>
    /Q /IACCEPTSQLSERVERLICENSETERMS /ACTION=install /FEATURES=Tools
    I simply changed it to the following and it worked....
    <EXENAME>
    /QUIET /IACCEPTSQLSERVERLICENSETERMS /ACTION=INSTALL /FEATURES=TOOLS
    It so seems that everything must be in CAPITALS for this to work.
    Regards,
    Soumen

  • Infamous 0x80072EE6 error WSUS (Server 2012)

    Hi Folks
    In a test test lab I have setup a windows 2012 R2 server (home-dc-01.pcecorp.com) and a few domain joined windows 8 clients.  The server has WSUS installed and I have configured a group policy with WSUS settings.
    However the test clients report the Infamous error: 0x80072EE6 when I try to run an update.
    client log snip:
    2014-10-21    14:45:18:403     884    960    EP    FATAL: SLS: Failed to construct full endpoint URL, error = 0x80072EE6
    I have tried setting WUServer and WUStatusServer in group policy to combinations of:
    home-dc-01.pcecorp.com
    http://home-dc-01.pcecorp.com
    http://home-dc-01.pcecorp.com:8530      (I understand this is what I should use!)
    the client is picking up the settings from group policy policy as [HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\WindowsUpdate] is getting populated
    I can query DNS and ping 'home-dc-01.pcecorp.com'
    Date/time and zone are correctly set
    I have disabled the firewall on both the server and client
    Dropped a test.htm file on the server in "C:\Program Files\Update Services\WebServices\Root"and I can sucsesfully access this from a client in a browser at:  http://home-dc-01.pcecorp.com:8530/test.htm
    Bindings on the 'WSUS Administraton' site are as default:
    http: 8530
    https: 8531
    Any other ideas?
    Thanks in advance

    Hi,
    The error code 0x80072EE6 means that the client can't recognize the protocol.
    Plese post the complete windowsupdate.log here. It may give some hints.
    Besides, could you try to run the WSUS Client Diagnostic Tool on the client?
    To download WSUS Client Diagnostic Tool, please click the link below,
    http://www.microsoft.com/en-us/download/details.aspx?id=30827
    Best Regards.
    Steven Lee
    TechNet Community Support

  • Windows Update error 80246003 Server 2012 / 2012 R2

    Hi All,
    I'm running into a problem trying to apply an update from WSUS 3.2.7600.226. Other updates have succeeded OK but I'm left with this one failing on more than one server. All the other updates seem fine but once this update fails windows update appears broken
    and will no longer update anything. 
    The update is KB2538243. I've attached the error to this post and also included some logs below. 
    So far I've removed the servers from wsus. Stopped the wuauserv service and deleted the "software distribution" folder. used gpupdate to detect them again. Nothing seems to work. The patches have been applied to wsus to allow updating of W8 and
    2012. 
    reportingevent.log
    {C8746CA9-B4D1-444C-A328-9DD4C55D5B7F} 2014-04-10 14:12:52:638+0100
    1 156 [AGENT_STATUS_30]
    101 {00000000-0000-0000-0000-000000000000}
    0 0
    AutomaticUpdatesWuApp Success
    Pre-Deployment Check Reporting client status.
    {D7B6F804-F14F-496A-8441-AB3C208E846F} 2014-04-10 14:12:53:388+0100
    1 161 [AGENT_DOWNLOAD_FAILED]
    101 {729A0DCB-DF9E-4D02-B603-ED1AEE074428}
    103 80246003
    AutomaticUpdatesWuApp Failure
    Content Download Error: Download failed.
    {0879984E-30B9-4D9B-AF57-BC1C7D79D2C5} 2014-04-10 15:15:53:126+0100
    1 147 [AGENT_DETECTION_FINISHED]
    101 {00000000-0000-0000-0000-000000000000}
    0 0
    AutomaticUpdatesWuApp Success
    Software Synchronization Windows Update Client successfully detected 1 updates.
    {7CE18B21-4171-4C2A-9721-10B3A0065E1D} 2014-04-10 15:15:53:126+0100
    1 156 [AGENT_STATUS_30]
    101 {00000000-0000-0000-0000-000000000000}
    0 0
    AutomaticUpdatesWuApp Success
    Pre-Deployment Check Reporting client status.
    {606FD01F-1067-42BE-B79F-70FA7D4E786C} 2014-04-10 15:15:53:954+0100
    1 161 [AGENT_DOWNLOAD_FAILED]
    101 {729A0DCB-DF9E-4D02-B603-ED1AEE074428}
    103 80246003
    AutomaticUpdatesWuApp Failure
    Content Download Error: Download failed.
    {F2B3147F-9BA2-469C-94E7-2AE5ABCED6D9} 2014-04-10 15:15:56:798+0100
    1 147 [AGENT_DETECTION_FINISHED]
    101 {00000000-0000-0000-0000-000000000000}
    0 0
    AutomaticUpdatesWuApp Success
    Software Synchronization Windows Update Client successfully detected 1 updates.
    {4C24E5FF-754E-4FDE-A94A-EA3FC05421E9} 2014-04-10 15:15:56:798+0100
    1 156 [AGENT_STATUS_30]
    101 {00000000-0000-0000-0000-000000000000}
    0 0
    AutomaticUpdatesWuApp Success
    Pre-Deployment Check Reporting client status.
    {8CA4C3D4-6863-4024-8B0C-64B4E3D67E82} 2014-04-10 15:15:57:767+0100
    1 161 [AGENT_DOWNLOAD_FAILED]
    101 {729A0DCB-DF9E-4D02-B603-ED1AEE074428}
    103 80246003
    AutomaticUpdates Failure
    Content Download Error: Download failed.
    {587487B1-5F5C-4020-88D8-D455DBFF3600} 2014-04-10 15:18:32:569+0100
    1 147 [AGENT_DETECTION_FINISHED]
    101 {00000000-0000-0000-0000-000000000000}
    0 0
    AutomaticUpdatesWuApp Success
    Software Synchronization Windows Update Client successfully detected 1 updates.
    {AA9B99F1-B716-43A8-A5B0-F500D139202B} 2014-04-10 15:18:32:569+0100
    1 156 [AGENT_STATUS_30]
    101 {00000000-0000-0000-0000-000000000000}
    0 0
    AutomaticUpdatesWuApp Success
    Pre-Deployment Check Reporting client status.
    {82AF887E-C294-41C6-95EF-69349940BEA8} 2014-04-10 15:18:33:491+0100
    1 161 [AGENT_DOWNLOAD_FAILED]
    101 {729A0DCB-DF9E-4D02-B603-ED1AEE074428}
    103 80246003
    AutomaticUpdates Failure
    Content Download Error: Download failed.
    {38E21A73-07B7-45B0-83BF-E6647E19AFCF} 2014-04-10 15:18:35:913+0100
    1 147 [AGENT_DETECTION_FINISHED]
    101 {00000000-0000-0000-0000-000000000000}
    0 0
    AutomaticUpdatesWuApp Success
    Software Synchronization Windows Update Client successfully detected 1 updates.
    {1D60C4A7-A5E8-404F-9D03-6468C5C35A05} 2014-04-10 15:18:35:913+0100
    1 156 [AGENT_STATUS_30]
    101 {00000000-0000-0000-0000-000000000000}
    0 0
    AutomaticUpdatesWuApp Success
    Pre-Deployment Check Reporting client status.
    {762EE1E6-106F-4AFF-885B-04B91F472AA7} 2014-04-10 15:18:36:866+0100
    1 161 [AGENT_DOWNLOAD_FAILED]
    101 {729A0DCB-DF9E-4D02-B603-ED1AEE074428}
    103 80246003
    AutomaticUpdatesWuApp Failure
    Content Download Error: Download failed.
    windowsupdate.log
    2014-04-10 15:18:36:569
    704 3c0
    AU ## START ##  AU: Download updates
    2014-04-10 15:18:36:569
    704 3c0
    AU #########
    2014-04-10 15:18:36:569
    704 3c0
    AU  # Found no download approved updates.
    2014-04-10 15:18:36:569
    704 3c0
    AU #########
    2014-04-10 15:18:36:569
    704 3c0
    AU ##  END  ##  AU: Download updates
    2014-04-10 15:18:36:569
    704 3c0
    AU #############
    2014-04-10 15:18:36:804
    704 a18
    DnldMgr BITS job {61E23E31-6C46-4638-8145-8CDB273C62E1} completed successfully
    2014-04-10 15:18:36:804
    704 a18
    DnldMgr CUpdateDownloadJob::GetNetworkCostSwitch() Neither unrestricted or restricted network cost used, so using current cost
    2014-04-10 15:18:36:804
    704 a18
    IdleTmr WU operation (DownloadManagerDownloadJob, operation # 3451) stopped; does use network; is not at background priority; will NOT start idle timer (task did not previously stop it
    2014-04-10 15:18:36:804
    704 a18
    IdleTmr Decremented PDC RefCount for Network to 0
    2014-04-10 15:18:36:804
    704 a18
    IdleTmr Decremented idle timer priority operation counter to 2
    2014-04-10 15:18:36:819
    704 a18
    Misc Validating signature for C:\Windows\SoftwareDistribution\Download\49b9fcd994be15e2906948beef673948\470640aa4bb7db8e69196b5edb0010933569e98d:
    2014-04-10 15:18:36:851
    704 a18
    Misc Microsoft signed: Yes
    2014-04-10 15:18:36:851
    704 a18
    DnldMgr  Download job bytes total = 4479832, bytes transferred = 4479832
    2014-04-10 15:18:36:851
    704 678
    DnldMgr ***********  DnldMgr: New download job [UpdateId = {542F36E8-38E5-49AE-9AEE-F35C6FF7107D}.103]  ***********
    2014-04-10 15:18:36:866
    704 678
    DnldMgr WARNING: Update validation failed, error 80246003.
    2014-04-10 15:18:36:866
    704 678
    DnldMgr FATAL: DM:CAgentDownloadManager::DownloadUpdate: pDownloadJob->Init failed with 0x80246003.
    2014-04-10 15:18:36:866
    704 678
    DnldMgr WARNING: Got error (hr = 80246003) starting update 0 in call 20. Notifying call.
    2014-04-10 15:18:36:866
    704 678
    DnldMgr Error 0x80246003 occurred while downloading update; notifying dependent calls.
    2014-04-10 15:18:36:866
    704 26c
    AU >>##  RESUMED  ## AU: Download update [UpdateId = {729A0DCB-DF9E-4D02-B603-ED1AEE074428}]
    2014-04-10 15:18:36:866
    704 26c
    AU  # WARNING: Download failed, error = 0x80246003
    2014-04-10 15:18:36:866
    704 678
    DnldMgr *********
    2014-04-10 15:18:36:866
    704 678
    DnldMgr **  END  **  DnldMgr: Download Call Complete [Call 20 for caller AutomaticUpdates has completed; signaling completion.]
    2014-04-10 15:18:36:866
    704 678
    DnldMgr *************
    2014-04-10 15:18:36:866
    704 26c
    AU Download call completed, hr = 0x80246003
    2014-04-10 15:18:36:866
    704 26c
    AU #########
    2014-04-10 15:18:36:866
    704 26c
    AU ##  END  ##  AU: Download updates
    2014-04-10 15:18:36:866
    704 26c
    AU #############
    2014-04-10 15:18:36:866
    704 678
    DnldMgr FATAL: DM:CAgentDownloadManager::LoadUpdateMetadataFromDatastore: GetUpdates failed with 0x80248007.
    2014-04-10 15:18:36:866
    704 678
    Report REPORT EVENT: {587487B1-5F5C-4020-88D8-D455DBFF3600}
    2014-04-10 15:18:32:569+0100 1
    147 [AGENT_DETECTION_FINISHED] 101
    {00000000-0000-0000-0000-000000000000}
    0 0 AutomaticUpdatesWuApp
    Success Software Synchronization
    Windows Update Client successfully detected 1 updates.
    2014-04-10 15:18:36:866
    704 678
    Report REPORT EVENT: {AA9B99F1-B716-43A8-A5B0-F500D139202B}
    2014-04-10 15:18:32:569+0100 1
    156 [AGENT_STATUS_30] 101
    {00000000-0000-0000-0000-000000000000}
    0 0 AutomaticUpdatesWuApp
    Success Pre-Deployment Check
    Reporting client status.
    2014-04-10 15:18:36:866
    704 678
    Report REPORT EVENT: {82AF887E-C294-41C6-95EF-69349940BEA8}
    2014-04-10 15:18:33:491+0100 1
    161 [AGENT_DOWNLOAD_FAILED] 101
    {729A0DCB-DF9E-4D02-B603-ED1AEE074428}
    103 80246003
    AutomaticUpdates Failure
    Content Download Error: Download failed.
    2014-04-10 15:18:36:866
    704 678
    Report REPORT EVENT: {38E21A73-07B7-45B0-83BF-E6647E19AFCF}
    2014-04-10 15:18:35:913+0100 1
    147 [AGENT_DETECTION_FINISHED] 101
    {00000000-0000-0000-0000-000000000000}
    0 0 AutomaticUpdatesWuApp
    Success Software Synchronization
    Windows Update Client successfully detected 1 updates.
    2014-04-10 15:18:36:866
    704 678
    Report REPORT EVENT: {1D60C4A7-A5E8-404F-9D03-6468C5C35A05}
    2014-04-10 15:18:35:913+0100 1
    156 [AGENT_STATUS_30] 101
    {00000000-0000-0000-0000-000000000000}
    0 0 AutomaticUpdatesWuApp
    Success Pre-Deployment Check
    Reporting client status.
    2014-04-10 15:18:36:866
    704 26c
    AU WARNING: Failed to get Network Cost info from NLM, assuming network is NOT metered, error = 0x80240037
    2014-04-10 15:18:36:866
    704 26c
    AU WARNING: Failed to get Network Cost info from NLM, assuming network is NOT metered, error = 0x80240037
    2014-04-10 15:18:36:866
    704 678
    Report CWERReporter::HandleEvents - WER report upload completed with status 0x8
    2014-04-10 15:18:36:866
    704 678
    Report WER Report sent: 7.9.9600.16422 0x80246003(0) 729A0DCB-DF9E-4D02-B603-ED1AEE074428 Download 101 Managed
    2014-04-10 15:18:36:866
    704 678
    Report CWERReporter finishing event handling. (00000000)
    2014-04-10 15:18:36:882
    704 26c
    IdleTmr Decremented idle timer priority operation counter to 1
    2014-04-10 15:18:36:882
    704 308
    AU WARNING: GetUpdateMetadata2 failed, error = 0x80248007
    2014-04-10 15:18:36:882
    704 308
    AU WARNING: GetUpdateMetadata2 failed, error = 0x80248007
    2014-04-10 15:18:38:585
    704 208
    AU BeginInteractiveInstall invoked for Install
    2014-04-10 15:18:38:585
    704 208
    AU Auto-approved 0 update(s) for install (for Ux), installType=0
    2014-04-10 15:18:38:585
    704 208
    AU WARNING: BeginInteractiveInstall failed, error = 0x8024000C
    2014-04-10 15:18:38:585
    704 870
    AU AU received handle event
    2014-04-10 15:18:38:585
    704 870
    AU WARNING: Failed to get Wu Exemption info from NLM, assuming not exempt, error = 0x80240037
    2014-04-10 15:18:38:585
    704 870
    AU Triggering Offline detection (non-interactive)
    2014-04-10 15:18:38:585
    704 870
    AU WARNING: Failed to get Network Cost info from NLM, assuming network is NOT metered, error = 0x80240037
    2014-04-10 15:18:38:585
    704 870
    AU WARNING: Failed to get Network Cost info from NLM, assuming network is NOT metered, error = 0x80240037
    2014-04-10 15:18:38:585
    704 870
    AU #############
    2014-04-10 15:18:38:585
    704 870
    AU ## START ##  AU: Search for updates
    2014-04-10 15:18:38:585
    704 870
    AU #########
    2014-04-10 15:18:38:585
    704 870
    IdleTmr WU operation (CSearchCall::Init ID 21) started; operation # 4008; does not use network; is at background priority
    2014-04-10 15:18:38:585
    704 870
    IdleTmr Incremented PDC RefCount for System to 1
    2014-04-10 15:18:38:585
    704 870
    Agent *** START ***  Queueing Finding updates [CallerId = AutomaticUpdates  Id = 21]
    2014-04-10 15:18:38:585
    704 870
    AU <<## SUBMITTED ## AU: Search for updates  [CallId = {46E5E308-CC0D-49A1-A033-DA0A05BA7E9E} ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}]
    2014-04-10 15:18:38:585
    704 654
    Agent ***  END  ***  Queueing Finding updates [CallerId = AutomaticUpdates  Id = 21]
    2014-04-10 15:18:38:585
    704 654
    Agent *************
    2014-04-10 15:18:38:585
    704 654
    Agent ** START **  Agent: Finding updates [CallerId = AutomaticUpdates  Id = 21]
    2014-04-10 15:18:38:585
    704 654
    Agent *********
    2014-04-10 15:18:38:585
    704 654
    Agent  * Online = No; Ignore download priority = No
    2014-04-10 15:18:38:585
    704 654
    Agent  * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation' or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1 or IsInstalled=0
    and DeploymentAction='Uninstallation' and RebootRequired=1"
    2014-04-10 15:18:38:585
    704 654
    Agent  * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
    2014-04-10 15:18:38:585
    704 654
    Agent  * Search Scope = {Machine & All Users}
    2014-04-10 15:18:38:585
    704 654
    Agent  * Caller SID for Applicability: S-1-5-18
    2014-04-10 15:18:38:929
    704 654
    Agent  * Found 0 updates and 66 categories in search; evaluated appl. rules of 287 out of 594 deployed entities
    2014-04-10 15:18:38:929
    704 654
    Agent *********
    2014-04-10 15:18:38:929
    704 654
    Agent **  END  **  Agent: Finding updates [CallerId = AutomaticUpdates  Id = 21]
    2014-04-10 15:18:38:929
    704 654
    Agent *************
    2014-04-10 15:18:38:929
    704 654
    IdleTmr WU operation (CSearchCall::Init ID 21, operation # 4008) stopped; does not use network; is at background priority
    2014-04-10 15:18:38:929
    704 654
    IdleTmr Decremented PDC RefCount for System to 0
    2014-04-10 15:18:38:929
    704 26c
    AU >>##  RESUMED  ## AU: Search for updates [CallId = {46E5E308-CC0D-49A1-A033-DA0A05BA7E9E} ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}]
    2014-04-10 15:18:38:929
    704 26c
    AU  # 0 updates detected
    2014-04-10 15:18:38:929
    704 26c
    AU #########
    2014-04-10 15:18:38:929
    704 26c
    AU ##  END  ##  AU: Search for updates  [CallId = {46E5E308-CC0D-49A1-A033-DA0A05BA7E9E} ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}]
    2014-04-10 15:18:38:929
    704 26c
    AU #############
    2014-04-10 15:18:38:929
    704 26c
    AU All AU searches complete.
    2014-04-10 15:18:38:929
    704 26c
    AU WARNING: Failed to get Network Cost info from NLM, assuming network is NOT metered, error = 0x80240037
    2014-04-10 15:18:38:929
    704 26c
    AU WARNING: Failed to get Network Cost info from NLM, assuming network is NOT metered, error = 0x80240037

    The patches have been applied to wsus to allow updating of W8 and 2012.
    Looks to me like you've installed KB2734608 on the WSUS server and then failed to perform the required post-installation client-side procedures, resulting in the WUA being unable to validate the installation file (because it doesn't have the SHA-2 hash cached
    in the client-side datastore).
    2014-04-10 15:18:36:866 704
    678 DnldMgr WARNING: Update validation failed, error 80246003.
    0x80246003
    -2145099773
    WU_E_DM_UNKNOWNALGORITHM
    The file metadata requested an unknown hash algorithm
    Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
    SolarWinds Head Geek
    Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
    My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
    http://www.solarwinds.com/gotmicrosoft
    The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

  • BugCheck ERROR 1001 Server 2012

    Kindly Assist, 
    I am experiencing the error below on one of my Cluster Nodes.
    Event 1001, BugCheck
    The computer has rebooted from a bugcheck.  The bugcheck was: 0x00000124 (0x0000000000000000, 0xfffffa80c3640028, 0x00000000b6000000, 0x0000000000040150). A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: 082714-46893-01.
    I Tried to analyze the minidump and am getting the info below
    hal.dll hal.dll+2d965
    fffff801`13403000 fffff801`1346f000
    0x0006c000 0x50875a79
    10/24/2012 6:03:21 AM Microsoft® Windows® Operating System
    Hardware Abstraction Layer DLL 6.2.9200.16442 (win8_gdr.121023-1503)
    Microsoft Corporation C:\Windows\system32\hal.dll
    ntoskrnl.exe ntoskrnl.exe+160ef9
    fffff801`1346f000 fffff801`13bbb000
    0x0074c000 0x51a966cd
    6/1/2013 6:13:17 AM Microsoft® Windows® Operating System
    NT Kernel & System 6.2.9200.16628 (win8_gdr.130531-1504)
    Microsoft Corporation C:\Windows\system32\ntoskrnl.exe
    How do I fix this issue?

    Hi,
    This Forum is not the best place for dump file analyzing. It's suggested to contact Microsoft Customer
    Support Services (CSS) so that a dedicated Support Professional can help you on this issue.
    To obtain the phone numbers for specific technology request, please refer to the website listed below:
    http://support.microsoft.com/default.aspx?scid=fh;EN-US;PHONENUMBERS¡¯
    If you are outside the US, please refer to
    http://support.microsoft.com   for regional support phone
    numbers.
    Thanks for your understanding.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Original File storage in Content Server

    Hi Gurus,
    My client has installed Content server for SAPDMS. Before installing content server we were storing files in the sap database.
    when i store original files from the transaction CV01n, i want to find out whether the files are stored in the sap database or CS.
    SInce earlier in the check-in document  screen,  the storage categories mentioned are seen. Now again after we installed content
    server we can see them with the new storage category of content server, since i have defined all these in the VAULT.
    My question is,  there is any path between the DATA carrier and the storage conditions.
    Kindly solve this gurus.
    Regards
    Poonguntran

    Anybody can help he out of this issue.

Maybe you are looking for

  • Mini-Displayport to DVI adapter not working, but Mini-Displayport to VGA and Thunderbolt work fine

    Mini-Displayport to DVI adapter not working, but Mini-Displayport to VGA and Thunderbolt work fine. This is a brand new MacBook Pro (15-inch, mid-2012) just received.  I suspect that this is a hardware problem as: The mini-displayport to DVI adapter

  • How do I get my merged clips to reconnect with their audio?

    I am on FCP 7 syncing audio and video with ProRes 4444 @ 23.98. I am merging clips into bins labeled according to their scene. Pretty straight forward. We then decided to go to ProRes 422 proxy to edit on a smaller faster drive at a lower cost. I tra

  • Fees with using AIM, SKYPE etc

    Please help me understand the fees for using AIM etc on the phone. I just got a bill, after two years and had extra charges for texting for the first time. In researching the issue, since push and sms was added AND turned ON for AIM, everytime someon

  • Movie not showing up in iTunes.

    I have 3 or 4 movies that i purchased that are not showing up in iTunes. The movies are still available in the store and are showing up on my iOS devices.

  • Adobe flash 14 (latest version) crashes everytime in Firefox 30.0

    I updated from Firefox 28 to Firefox 30 today. Nowhere that needs Adobe Flash will work. not Youtube or even Speakeasy. Just the dreaded "Flash plugin has crashed" notification. Everything worked in 28 and add on manager says my plugin is up to date