File system and LR2 file system view summary

Hello,
Is there a way when navigating a directory via the Folders panel to click on the folder and get summary information about the contents of the folder both from a file system perspective as well as a Lightroom perspective?
file system perspective: number of physical files supported by LR2 in the folder
LR2 perspective: the number of files that have virtual copies, how many total virtual copies total, how many photos are in stacks, how many stacks, etc.
Thanks,
Matt
-Windows XP x64 SP2
-AMD Athlon 64 X2 Dual Core 6400+
-4.00 GB of RAM
-Lightroom Version 2.0 64-bit 481478 Camera Raw 4.5
-Two Silicon Graphics GDM-5011P Monitors
-Huey Pro with version 1.5 of their calibration/profiling software
-Nvidia Evga 8800 GT graphics card with 512 MB of Video RAM
-Monitor One: The 'normal' Lightroom window in either the Library or Develop Module
-Monitor Two: 'Loupe-Normal' in 1:1 view

               No, you can't specify an entire filesystem as something to cluster. I
          suggest using NFS or some shared filesystem and then running a cluster
          off of that.
                                   - Mike
          Michael Lenart wrote:
          >
          > yes
          > "Mike Benham" <[email protected]> wrote in message
          > news:[email protected]..
          > >
          > >
          > >
          > > I'm not sure if I understand what you're asking. How can you cluster a
          > > filesystem? It seems like you want to mount some filesystem via NFS and
          > > then access that from each instance of a server? Are you asking if
          > > Weblogic can perform the duty of NFS?
          > >
          > > - Mike
          > >
          > >
          > > Michael Lenart wrote:
          > > >
          > > > Can the file system be clustered?? For example, in the cluster level
          > > > property file can I have a file system with the name of XDrive and then
          > use
          > > > that file system in my components??
          

Similar Messages

  • Dump Previous Systems and Damaged Files?

    I just upgraded to Tiger (10.4.6) from 10.3.9. I have two new folders on my Finder now, Previous Systems and Damaged Files. As I have only 25 GB of an 80 gig hard drive left, is it OK to dump them?
    eMac 1.24 GHz Power PC G4   Mac OS X (10.4.6)  

    With 25 GB remaining you should be in no immediate danger of filling the hard drive and killing the system, so you can take your time checking out 10.4.6 before you toss the Previous Systems folder. You can look it over and decide if there are any files in there you want to still use. That said, I kept the Previous System folder around on my eMac after updating for all of maybe three days, so yeah, you can toss Previous Systems.
    I'd be more concerned about a Damaged Files folder. I've never seen thaat as part of an upgrade, it suggests there may be directory or physical disk damage. If you open Disk Utility, what does it show for your hard drive's SMART status? If you boot from the Tiger install disk and run Disk Utility> Repair Disk from the Installer menu, does it report any problems? What sort of files are in the Damaged Files folder?

  • Moving indesign files (.indd) and link files

    Hi guys
    How can I move indesign files (.indd) and link files to another folder without breaking the link? or recreate the link.
    I couldnt find any good answer.
    Thanks

    As per my knowledge, such scenario is not supported by product, these links are of "absolute" type (let Adobe team prove I am wrong).
    If you have 360 files and need to rename/move the whole project, the only reasonable way is to write a script that would find and update all references with new location.
    The only other trick that comes to my mind is to manipulate the file system (NTFS or whatever Mac OS X uses), i.e. create a hardlink for folder, and/or bunch of softlinks for files, between old and new location, so that from the program's point of view the path and filenames would be the same. A sort of a quick & dirty hack.
    But it only makes sense to do so, if you do not need to reuse old location and filenames. A script to fix broken links, especially if you handle and support it yourself, will resolve this problem forever.

  • FireFox 4 and earlier versions will not install on my Windows Vista, 64 bit computer. The file downloads and the file extracts but I never make it to the installation wizard.

    I have tried to download FireFox 4 and earlier versions from several different website, thinking the files might have gotten corrupted, and each time I download the file the exact same thing happens, the file downloads and the file gets extracted but when the extraction completes the small window dissappears and nothing else happens.
    My machine is a Windows Vista 64 bit system and I've tried downloading the file with my 32 and 64 bit Internet Explorer but nothing seems to work. Can someone help me please because I would love to be able to completely delete I.E.

    Hi, thanks for your Flash file info. Well you must have been doing it right, since all of your Flash files for IE and FF are correct.
    The SWF plugin for FF and the SWO for IE are also correct.
    You shouldn't be having any problems with Flash Player.
    What you can try is to turn off the hardware acceleration feature. Go to any video, like youtube and right click on the video and click on Settings. Display Settings is where you will UN check hardware acceleration.
    See if that helps. Let me know.
    Thanks,
    eidnolb

  • I can not transfer date from one hard drive to another, I keep getting an error because I have two of the same file names and one file name is in caps and I cant change the file name

    can not transfer date from one hard drive to another, I keep getting an error because I have two of the same file names and one file name is in caps and I cant change the file name. My original external has an error and needs to be reformatted but I dont want to lose this informations its my entire Itunes library.

    Sounds like the source drive is formatted as case sensitive and the destination drive is not. The preferred format for OS X is case insensitive unless there is a compelling reason to go case sensitive.
    Why can't you change the filename? Is it because the source drive is having problems?  If so is this happening with only one or two or a few files? If so the best thing would be to copy those over individually and then rename them on the destination drive.
    If it is more then you can do manually and you can't change the name on the source you will have to reformat the destination as case sensitive.
    Btw this group is for discussion of the Support Communities itself, you;d do better posting to Lion group. I'll see if a host will move it.

  • How can I download music files (MP3) and video files (AVI) to iPod Nano?

    I just want to download music files (MP3) and video files (AVI) to my son's iPod Nano and iTunes has all menus grayed out, can't get on Apple support site to upload diagnostics file. Driving me mad - should be simple...  Please help!!! Dump of diagnostics below:
    Microsoft Windows XP Professional Service Pack 3 (Build 2600)
    INTEL_ DG41RQ__
    iTunes 11.1.3.8
    QuickTime 7.2
    FairPlay 2.5.16
    Apple Application Support 2.3.6
    iPod Updater Library 11.1f5
    CD Driver 2.2.3.0
    CD Driver DLL 2.1.3.1
    Apple Mobile Device 7.0.0.117
    Apple Mobile Device Driver 1.64.0.0
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 1.9.6.502
    Gracenote MusicID 1.9.6.115
    Gracenote Submit 1.9.6.143
    Gracenote DSP 1.9.6.45
    iTunes Serial Number 0012B9B00CB27BC0
    Current user is an administrator.
    The current local date and time is 2013-12-22 23:15:54.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is disabled.
    HDCP is not supported.
    Core Media is not supported. (16002)
    Video Display Information
    ATI RADEON XPRESS 200 Series
    Intel(R) G41 Express Chipset
    **** External Plug-ins Information ****
    No external plug-ins installed.
    **** Network Connectivity Tests ****
    Network Adapter Information
    Adapter Name:        {E4F794BB-151F-490C-8AC0-1EDB6DA3718A}
    Description:             D-Link DWA-125 Wireless N 150 USB Adapter(rev.A2) - Packet Scheduler Miniport
    IP Address:              192.168.5.104
    Subnet Mask:          255.255.255.0
    Default Gateway:     192.168.5.1
    DHCP Enabled:       Yes
    DHCP Server:          192.168.5.1
    Lease Obtained:      Sun Dec 22 21:35:11 2013
    Lease Expires:         Mon Dec 23 21:35:11 2013
    DNS Servers:          91.216.105.75
                                    216.93.191.228
    Active Connection:  LAN Connection
    Connected:              Yes
    Online:                     Yes
    Using Modem:         No
    Using LAN:              Yes
    Using Proxy:            No
    Firewall Information
    Windows Firewall is on.
    iTunes is enabled in Windows Firewall.
    Connection attempt to Apple web site was successful.
    Connection attempt to browsing iTunes Store was successful.
    Connection attempt to purchasing from iTunes Store was successful.
    Connection attempt to iPhone activation server was successful.
    Connection attempt to firmware update server was unsuccessful.
    The network connection timed out.
    Connection attempt to Gracenote server was successful.
    iTunes has never successfully accessed the iTunes Store.
    **** CD/DVD Drive Tests ****
    No drivers in LowerFilters.
    UpperFilters: GEARAspiWDM (2.2.3.0),
    D: LITE-ON DVDRW SHW-160P6S, Rev PRS2
    Drive is empty.
    **** Device Connectivity Tests ****
    iPodService 11.1.3.8 is currently running.
    iTunesHelper 11.1.3.8 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    Universal Serial Bus Controllers:
    Standard Enhanced PCI to USB Host Controller
    Standard OpenHCD USB Host Controller
    Standard OpenHCD USB Host Controller
    Standard OpenHCD USB Host Controller
    Standard OpenHCD USB Host Controller
    Standard OpenHCD USB Host Controller
    Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C8.  Device is working properly.
    Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C9.  Device is working properly.
    Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CA.  Device is working properly.
    Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CB.  Device is working properly.
    Intel(R) 82801G (ICH7 Family) USB2 Enhanced Host Controller - 27CC.  Device is working properly.
    FireWire (IEEE 1394) Host Controllers:
    Texas Instruments OHCI Compliant IEEE 1394 Host Controller
    Connected Device Information:
    IPOD (K:\), iPod nano (7th Generation) running firmware version 1.0.2
    Serial Number:         DCYK27TGF0GT
    Bus Speed:              61440
    **** Device Sync Tests ****
    No iPod, iPhone, or iPad found.

    Hi fkerrin!
    In case you haven’t already tried this process before, here is an article for you about syncing media to the iPod:
    iTunes: Syncing media content to iPod
    http://support.apple.com/kb/ht1351
    Thanks for coming to the Apple Support Communities!
    Regards,
    Braden

  • Information about file Id, Logical file name and Physical file name

    Hi All,
    I am testing one program. Selection screen has 3 parameters, File Id, Logical File Name and Physical file name. In Physical File name, i am giving complete file name with path. But it is giving error. Please tell me, what is File id and what all information i need to enter for logical file name and physical file name.
    Thanks
    Puneet Aggarwal

    hi,
    try using this for filename.
    parameters : p_file like rlgrap-filename.
    Thanks,
    Gaurav

  • Logical file names and Physical file names

    Hi Guys...
         Can you let me know what is the difference between Logical file names and Physical file names?
    Regards,
    Rohit

    Using Logical Files in ABAP Programs http://help.sap.com/saphelp_nw04/helpdata/en/9f/db95e635c111d1829f0000e829fbfe/content.htm
    Creating and Defining Logical Filenames
    http://help.sap.com/saphelp_nw04/helpdata/en/fc/eb3df8358411d1829f0000e829fbfe/content.htm

  • What are the differences between file vault and legacy file vault?

    what are the differences between file vault and legacy file vault?

    Legacy is an encrypted disk image of your Home folder, FileVault2 is whole disk encryption

  • One Sender system and two receivers system scenario. Pls help

    Hello,
    I have One Sender system and two receivers system scenario.
    My sender is RFC (sync) in nature.
    My one receiver is RFC (sync) in nature.
    My second receiver is RFC (sync) in nature.
    Pls tell me and send me links/docs for this scenario.
    Regards

    Hi Rick,
    For two receivers you require 2 interface determination, receivers determinations etc.
    Go through these threads for one sender and multiple receivers:
    one sender and two receiver
    /people/shabarish.vijayakumar/blog/2005/08/03/xpath-to-show-the-path-multiple-receivers
    Then configure your RFC communication channel in XI system + activate it and after that using all same parameters make an TCP/IP RFC destinatioon on R3 side.
    Rewrads if found helpful.
    BR,
    Alok

  • My mac says that it has 40 gb of movies on it but when i finder search for file size, and for file type it gives me no videos

    My mac says that it has 40 gb of movies on it but when i finder search for file size, and for file type it gives me no videos or movies. I have called apple 3 times and each time they do the same thing and then do something that takes awhile to finish so we hang up and then it never works.
    Please Help

    each time they do the same thing
    And what thing might that be?

  • I have One Sender system and two receivers system scenario. Pls help

    Hello,
    I have One Sender system and two receivers system scenario.
    My sender is RFC (sync) in nature.
    My one receiver is RFC (sync) in nature.
    My second receiver is RFC (sync) in nature.
    How to proceed with this.
    If my second receiver is async then how to proceed with this.
    Regards

    Hi Rick !
    Depending on your requierements, you can create a BPM that
    1) receives request from sender
    2) sends request to receiver 1 / receives response from receiver 1
    3) sends request to receiver 2 / receives response from receiver 2
    4) do some processing with both responses
    5) sends response to sender.
    If your second receiver is async, just use an async send step in step 3. As far as I know, you cannot use multimapping with sync scenarios.
    Regards,
    Matias.
    ps: please award points if helpful

  • File Adapter and Third party system

    Hi,
    I am new to XI and implementing a simple scenario.
    In SLD- I have 3rd paty software component and product.
    3rd party technical system: using my pc - For host name I am using my machine name.
    Scenario: Using file adapter transform csv file to xml.
    File resides on my machine. I have configured file adapter inbound and outbound. Integration Dir & Rep objects are all activated.
    But nothing happens, cannot see any message in Messgae monitoring..
    Any help would be great.. Is my technical system setup wrong?
    thanks

    chk whether the folder in your m/c where the CSV file resides is shared and has appropriate access. Also you need to specify your m/c IP with fwd slashes, e.g) //<Ipaddress>/foldername
    configuring your m/c as a Third Party system in SLD is fine.
    If you think ur SLD settings are not correct, you can define your file adapter commn. channel  in a Business Service(which does not require an SLD entry) and check whether it works.
    Thanks
    Saravana

  • How to view long file names and sort files within folders/projects?

    Hello, like so many people here, I am a new mac user, but certainly not computer illiterate. I have been a professional photographer for 10 years and recently change to mac and have been slowly trying to adapt my work flow accordingly.
    However I have become increasingly frustrated with Aperture 3 and after reading posts here it looks like I am certainly not the only person. While in my case I am sure it is because of my inexperience with mac systems so any guidance or assistance is much appreciated.
    Hopefully my questions are simple. I have been importing my images and re-naming images as I do so. A very simple combination of date, custom name, and counter. However, when I look at the images once the import has completed, they are not in any logical order within the 'project'. I have tried to sort them by file name, orientation, file size, etc, both ascending and descending, but they will not list in the correct order. eg the file '2010-03-09 Lyon France 001', continually falls between '2010-03-09 Lyon France 022' and '....021'.
    This has also lead me to a further question. While my file names can generally be read when the image is a landscape format, on the portrait images the file name it too long for me to read the whole name, and I can not find anyway to read the file name, eg browser, split screen, viewer, or full screen.
    Im sorry for all the details, and I am sure it is just my lack of experience, so appreciate your help.
    PS. On a separate note, I notice on another thread from the frustrated user 'ultratechy' that he got a reply from Tony who stated 'Also after installing any application you should always run disk utility and repair permissions....' Now as I am completely new to mac, I had no idea about this. Any other tips that I should always be aware of? Thanks again.

    Thanks for your reply Calx. If it makes you feel better, I am actually a New South Welshman - just living in the sunshine state!
    You are correct, I am trying to get my head around a new way of working and thinking, but I suppose it will all become clearer as time goes by. I have re-visited the manual many times, and been doing loads of research online, but just trying to put it all into practice now, so any tips or advice is always appreciated.
    At the moment, I am just working with a small part of my library until I do get my head around things before moving onto the bulk of my images. I have my images stored and backed up on multiple external hard drives. I am trying to import my images into aperture from an external drive as I have been slack over the years with keywording, metadata, organising, etc etc, so I figure from what I have read that aperture may assist me with making these time consuming tasks a bit quicker and easier.
    I have put a bit of thought into my filing structure, but I am sure that with further use and understanding, this may change in the future, but I hope not. To give you an example of how I am thinking and working - I have used folders for my regular clients, eg, Ray White, and then made another level of folders within 'Ray White' for the date, and then in each 'date folder' I place my projects and name them with the address of the property I have photographed. I select and edit images from each project and place them in albums under each project. Not sure if this is the most perfect structure, but any advice is welcome.
    Keywords is always an issue with me. Over the years I have compiled a number of list for each client and each 'type' of photography. For example, real estate images have there own list, I just simply manually add keywords for specific jobs, eg the address and any specific location or features.
    Again, advice and guidance always welcome and I would appreciate how you go about these topics? And maybe you can help explain something that I have pre-emted may be a problem, and it may happen when I move onto my larger library, and I am not sure how to explain this as it may show my lack of management previously. When I worked on my PC, I used PS4, Adobe Bridge and Camera RAW pretty much exclusively. For my landscape images for example, I might have 2 or 3 variations of the one images, eg, black and white, sepia, and color for instance. But the file name remained the same, I just stored them in different folders indicating what version of the image was stored there. Now I am thinking that when I import images in Aperture, I will come across difficulties because Aperture will think the I am importing duplicate images because I will in fact have 3 images with the same file name, even though the adjustments I have made to them are different. Is this the case? Will I have to make adjustments again? Will I have to change the name of the files prior to importing? If so, any advice or tips?
    Well, I should stop there. Im sorry to bombard you with some much text, but as mentioned, I am new, and finding my feet, so thanks for your time.

  • Read incoming EDI File content and FTP file on R/3 server based on value

    Hi,
    We have the below scenario:
    The incoming file is received in XI in the below directory:
    /usr/feeders//interfaces/EP1/abc
    The file name is- TCDE.BLQSAM.OCAA2682.C0084031
    The file contains some data like below:
    UNBUNOA:3HEXAGON-ABCABC10268002090806:1004+403140015324'
    UNH1CONTRL:2:2:UN:APACS'
    UCI1000284217ABC10268002HEXAGON-ABC7+C00'
    Based on this incoming file reference number in line 3 as given (1000284217) for example, a lookup needs to be made in R/3 in a table to determine if the file should be placed in directory A or Directory B in R/3 without any XML conversion.
    I have made the scenario and the details are as below:
    Created the new Mapping Archive in the IR and import this .jar
    Created an Interface mapping for the Control File processing and select the mapping program from the archive
    Created a Business Service called  "BSY_ECC6_FI_CENTRAL" and a communication channel called "CCIA_01_RFC_RECEIVER", for the connection to the R/3 system of type RFC and will have to have the connection settings for the R/3 backend with the client which has the data in it for the FM call.
    I have the java code that I can forward you for reference.
    I am not able to run the scenario successfully.
    Plaese advise as to how I can develop this scenario.
    Regards,
    Archana

    Hi Archana,
    Based on this incoming file reference number in line 3 as given (1000284217) for example, a lookup needs to be made in R/3 in a table to determine if the file should be placed in directory A or Directory B in R/3 without any XML conversion.
    Created the new Mapping Archive in the IR and import this .jar
    Created an Interface mapping for the Control File processing and select the mapping program from the archive
    Created a Business Service called "BSY_ECC6_FI_CENTRAL" and a communication channel called "CCIA_01_RFC_RECEIVER",
    for the connection to the R/3 system of type RFC and will have to have the connection settings for the R/3 backend with the
    client which has the data in it for the FM call.
    What i understand from your Qs is, you want to get the location where the file need to be placed from the table in R/3 system
    based on the ref. no mentioned in source EDI file, and the target file should be placed as a flat file format.
    You are using RFC lookup to get the details of the location in Java mapping, Once you have the location you can map it to the
    element in payload and using varaible substitution you can specify the  target directory.
    Regards,
    Prasanna

Maybe you are looking for

  • I need more help

    I have to install an new hard my main run of room on it and I transfer everything over to the new hard drive will Itunes will play the list is gone. I have try going to the download page to reinstall it that doesn't work could I please have the link

  • How can I get my music transferred from my ipod classic back to my computer?

    I have a 5th generation Ipod classic that is cracked on the surface but works still on a docking station at home in which I can select the music through my tv.  My problem is that certain music and ablums show they are on my itunes but do not play on

  • Changing Frequency of individual photos in slideshow

    Is it possible? In iphoto it is (each photo can be displayed for a different amount of time) .... but it doesn't seem possible in idvd ... I would like to match photos to music ... so would like some photos to be up for 1 second, others 2 seconds, ot

  • Where can i download Visual Composer 7.0?

    Hi, Where can i download Visual Composer 7.0? Thanks.

  • How can I get cloud totally off my ipad -

    How can I get cloud totally off my ipad - I hate the tabs it installed on Safari.  I deleted the account on Ipad but it is still there (just asking for sign in) and still tabs taking up space on an already small screen...thx! Or even how to remove th