File System - /sapdb/LCA/backup - 100% Full
Hello Gurus
In Our Test server File System - /sapdb/LCA/backup is full, can anybody tell us in which way we are able to create some space in this file system
Seeking for an early help
Server Description
Database - ORACLE - 9.2.0.7.0
Operating System - AIX
Component Version - SCM 4.10
Thanks & Regards
Shishir
Hi,
OSS note 869267 should address the issue you have. Please revert if it doesn't.
Regards
Vinod
Similar Messages
-
Opinion on non-clustered file system to offload backups
3 node 11.2 rac using ASM on SAN.
All of the RMAN backups go to +FRA. Any node can initiate RMAN and create backups.
I want to offload the backups from +FRA to a filesystem. Our current backup system can only read cooked file systems.
This LUN also comes from the same SAN. It will have a file system, ext4. It will be visible to all 3 nodes and will be mounted to ONLY the first node. First node will be the one to copy from asm to this filesystem.
If first node is out of commission, I can mount the backup lun to one of the other remaining nodes.
Does this sound like a decent plan or should I go with a clustered file system?
Thanks for you opinions!Have you looked at using ACFS? Create a very big diskgroup, then create an ACFS volume and finally an ACFS filesystem. create a path on all nodes on which the ACFS filesystem will be mounted.
Example: Using asmca do the following
mkdir /d01/FRA on all systems
DGFRA (4disks at 500G)
Create ACFS volume 1.8T
Create ACFS filesystem mount point of /d01/FRA
set your db_recovery_file_dest=/d01/FRA scope=both sid='*'
Now any node can backup to this FRA location AND any node can copy files to tape or where ever...
This is "supported" as of 11.2.0.3 ( I have used it on 11.2.0.1 and 11.2.0.2 for testing) -
RMAN to Disk (shared mounted file system) then secure backup to Tape
Hi
This is a little away from the norm and I am new to Oracle secure Backup.
We have several databases on physically separate servers, all backup to a central disk (a ZFS shared file-system).
We have a media server also with the same mounted file-system so it can see all of the RMAN backups there.
Secure backup is installed on the media server and is configured as such.
The question I have is I need to backup the file system to tape where all the RMAN backups live, I have configured the data set but I get file permission errors for each of the RMAN backup files in the directory.
I have tried to change these permissions but to no avail (assuming it is just a read write access change that is needed - but this may be a problem in the long run). What is the general process for backup of already created RMAN backups sat in a shared area? I know its not the norm to do to disk then to tape backups but can this be done? I would have installed Secure backup client on each server and managed the whole backup through secure backup but this is not possible I must do the to tape from the file system, any advise and guidance on this would be much appreciated.
Kind regards
Vicky
Edited by: user10090654 on Oct 4, 2011 4:50 AMYou can easily accomplish a very streamlined D2D2T strategy! RMAN backup to disk...then backup that disk to tape via RMAN and OSB. Upon restore, RMAN will restore from best media disk or tape based on where files are located.
Donna -
SQL0968C The file system is full
Hi All,
In our BI pre-prod system we trying to test the BI data load.
It stopped giving this error in SM21
Database error -968 at FET
SQL0968C The file system is full. SQLSTATE=57011
Database error -968.
Our BI is 7.0 version ,DB2 8.1, AIX 5.3.
I checked in db2diag.log and found that temporary tablespace was full at that time.
Following is some example from db2diag.log.
2007-06-18-21.00.17.073907+060 E154034841A701 LEVEL: Error
PID : 528538 TID : 1 PROC : db2pclnr 0
INSTANCE: db2fbr NODE : 000
FUNCTION: DB2 UDB, buffer pool services, sqlbClnrAsyncWriteCompletion, probe:0
MESSAGE : ADM6017E The table space "PSAPTEMP16" (ID "3") is full. Detected on
container "/db2/FBR/saptemp1/NODE0000/temp16/PSAPTEMP16.container000"
(ID "0"). The underlying file system is full or the maximum allowed
space usage for the file system has been reached. It is also possible
that there are user limits in place with respect to maximum file size
and these limits have been reached.
But we tested the same load before with approximatly same amount of data but dont know why its giving the problem this time.
How to solve this temporary tablespace issue is it require to increase the filsystem size. tablespace is in autoextent mode and fiesystem is still 20GB free.
Regards,
ManishHi Manish,
when looking at the error message <a href="http://publib.boulder.ibm.com/infocenter/db2luw/v9/topic/com.ibm.db2.udb.msg-search.doc/doc/sql0968-sch.htm?resultof=%22%53%51%4c%30%39%36%38%43%22%20%22%73%71%6c%30%39%36%38%63%22%20">SQL0968C</a>, the documentation states the following:
SQL0968C
The file system is full.
Explanation:
<b>One of the file systems containing the database is full. This file system may contain the database directory, the database log files, or a table space container.</b>
The statement cannot be processed.
User response:
Free system space by erasing unwanted files. Do not erase database files. If additional space is required, it may be necessary to drop tables and indexes identified as not required.
On unix-based systems, this disk full condition may be due to exceeding the maximum file size allowed for the current userid. Use the chuser command to update fsize. A reboot may be necessary.
This disk full condition may be caused when containers are of varying sizes. If there is sufficient space in the file system, drop the table space and recreate it with containers of equal size.
sqlcode: -968
sqlstate: 57011
Please check also the other filesystems that belong to the database, not only the one where PSAPTEMP16 is included.
Check, if you are using quotas in your system.
Kind regards
Waldemar Gaida -
File system /usr/sap/SID full
Hello All,
File system /usr/sap/SID getting full
I have rese trace from SAP level but still file system rapidly increasing...
below 2 files rapidly incrasing more space in file system
hostname:sidadm 136> du -sk dev_server1
31400 dev_server1
hostname:sidadm 136> pwd
/usr/sap/SID/DVEBMGS02/work
more dev_server1
[Thr 76096] * LOCATION SAP-Gateway on host xxxx / sapgw02
[Thr 76096] * ERROR registration of tp SLD_NUC from host xxxx not allowed
[Thr 76096] *
TIME Sat Mar 27 13:05:32 2010
[Thr 76096] * RELEASE 700
[Thr 76096] * COMPONENT SAP-Gateway
[Thr 76096] * VERSION 2
[Thr 76096] * RC 720
[Thr 76096] * MODULE gwxxrd.c
[Thr 76096] * LINE 3766
[Thr 76096] * COUNTER 60935963
[Thr 76096] *
[Thr 76096] *****************************************************************************
[Thr 76096] *** ERROR => SAP_CMACCPTP3: wrong rqtype SAP_ACCPTP [r3cpic_mt.c 10240]
[Thr 75582]
Please help me to solve permently
Regards
MohsinHi Gaurav,
I got the issue, problem was that the reginfo and secinfo on my ABAP system which was connected to my JAVA system, it was not allowing the requests to pass through and hence it was not getting registered. I deactivated the parameters of reginfo and secinfo and its now working fine.
I will look into the issue of where i went wrong with reginfo/secinfo -
In my Database and Application Server,
mount point /sapmnt/D01/global
WF_LOG_000000016002_017-rwxrwxrwx 1 root sys 2936 Jun 22 2007
WF_LOG_000000016003_017-rwxrwxrwx 1 root sys 2936 Jun 22 2007
WF_LOG_000000016004_017-rwxrwxrwx 1 root sys 2936 Jun 22 2007
WF_LOG_000000016005_017-rwxrwxrwx 1 root sys 2936 Jun 22 2007
WF_LOG_000000016006_017-rwxrwxrwx 1 root sys 26225 Jun 22 2007
WF_LOG_000000066004_017-rwxrwxrwx 1 root sys 5548 Jun 22 2007
WF_LOG_000000066005_017-rwxrwxrwx 1 root sys 29140 Jun 22 2007
WF_LOG_000000066006_017-rwxrwxrwx 1 root sys 24134 Jun 22 2007
So shall I remove this logs frm database and Application Server.
Regards,
santoshThanx SAM, for reply message, I use swu10 remove the log.
but in my file system is still showing 93 % full.
/sampmt/D01/global following direcory are there .
total 15730
drwxrwxrwx 2 root sys 152576 Apr 16 10:35 000JOBLG
drwxrwxrwx 2 root sys 432128 Apr 16 18:56 017BDCLG
drwxrwxrwx 2 root sys 4234240 Apr 17 09:50 017JOBLG
-rwxrwxrwx 1 root sys 0 Jun 22 2007 ABAPPROT
-rw-rr 1 d01adm sapsys 416440 Apr 17 09:48 SLOGJ
-rwxrwxrwx 1 root sys 639432 Jun 24 2007 SLOGJ.SAV
-rw-rr 1 d01adm sapsys 999920 Apr 14 10:27 SLOGJO
-rwxrwxrwx 1 d01adm sapsys 999920 Jun 23 2007 SLOGJO.SAV
-rw-rw---- 1 d01adm sapsys 2515 Apr 15 12:35 WF_LOG_000000125004_017
-rwxrwxrwx 1 d01adm sapsys 160 Jun 25 2007 dev_sapstart
-rwxrwxrwx 1 d01adm sapsys 270 Jun 24 2007 ms_acl_info
drwxrwxrwx 2 d01adm sapsys 1024 Apr 13 09:26 sapcontrol
drwxrwxrwx 4 d01adm sapsys 96 Jun 24 2007 security
pwd
/sapmnt/D01/global
shall I remove this logs directory..
Regards,
Santosh -
I have a 83Gb file system that apparently is not full, but its actually full, because I have run out of inodes, and I have 10 million files in there, so I want to create another that will cater for this inode issue. My question is if I use the
newfs -T
option will it work? As its only going to be 90Gb?You use probably a UFS file system, right ? Then in this case, use the "-i" option with a value less as 8192. 8192 is the default value for a UFS filesystem that is between 3GB and 1 TB size.
But if you want to store 10M of files, UFS will be limited to 1M per TB : 64-bit: Support of MultiterabyteUFS File Systems (System Administration Guide: Devices and File Systems)
In this case, use instead UFS a ZFS filesystem that supports 2^48 entries !!! -
Root file system is 100% full on server with oracle databse
hi,
This was very strange to me, i have a solaris 10 Generic_122300-03 sun4u sparc SUNW,Sun-Fire-V440, with one oracle database running on it. The daatabase guys was doing some activity and the CPU utilization was 100%. I got an update from db team that their process was hung for aroung 2 hours and db was not coming up. At this point of time the / file system was piling 100% and suddenly the database came up and / file system came down to normal.
i am not sure what had happened, i didnt get an oppurtunity to check for any logs files getting generated under / apart from var or swap which can cause this. var is seperate file system.
any idea on finding this out?Only thing I can suggest is to have auditing enabled - then you can possibly see what file or directories are being accessed during this time when it slows down. Also make sure you have enough swap space defined. I had production machines in the past that generated massive swap usage and the system would slow to a crawl during the time the application/machine was initializing for a run. Also check the usual messages in /var/adm.
-
Root file system getting full SLES 10 SAP ERP6
Hi Gurus
Iam having an unusual problem.My / file system is getting full and i can`tv pick up what causing it .I have checked the logs in /var/messages.I dont know whats writing to / .I didnt copy anything directly on /
Filesystem Size Used Avail Use% Mounted on
/dev/sda5 7.8G 7.5G 0 100% /
SLES 10 64 bit ERP6 SR2
Anyone who had a similar problem.
Any ideas are welcomecd /
xwbr1:/ # du -hmx --max-depth=1
1 ./lost+found
48 ./etc
1 ./boot
1 ./sapdb
1 ./sapmnt
1430 ./usr
0 ./proc
0 ./sys
0 ./dev
85 ./var
8 ./bin
1 ./home
83 ./lib
12 ./lib64
1 ./media
1 ./mnt
488 ./opt
56 ./root
14 ./sbin
2 ./srv
1 ./tmp
1 ./sapcd
1 ./backupdisk
1 ./dailybackups
1 ./fulloffline
cd /root
xwbr1:~ # du -hmx --max-depth=1
1 ./.gnupg
1 ./bin
1 ./.kbd
1 ./.fvwm
2 ./.wapi
12 ./dsadiag
1 ./.gconf
1 ./.gconfd
1 ./.skel
1 ./.gnome
1 ./.gnome2
1 ./.gnome2_private
1 ./.metacity
1 ./.gstreamer-0.10
1 ./.nautilus
1 ./.qt
1 ./Desktop
1 ./.config
1 ./Documents
1 ./.thumbnails
38 ./.sdtgui
1 ./sdb
1 ./.sdb
4 ./.mozilla
56 . -
FILE SYSTEM BACKUP IS HANGING ON OSB
Hi all
i am having a test setup for OSB ( using windows 2003 ent 32 bit , administrative server + mediaserver ) , i am using HP c1537a scsi Tape drive ( driver details Microsoft 10/1/2012 version 5.2.3790.0 ) , and while firing the file system backup the job is getting hanged on the webtool,
i am attaching the logs
WEB TOOL LOG
admin/5.1
Type backup osb-server
Level full
Family FS-BKP-MF
Encryption off
Scheduled time 04/19.11:29
Introduction time 2012/04/19.16:59
Earliest exec time 04/19.11:29
Last update time 2012/04/19.17:23
Expire time never
State running since 2012/04/19.17:23
Priority 100
Privileged op yes
Run on host osb-server
Requires host osb-server and family FS-BKP-MF and any device
Attempts 2
Log
2012/04/19.16:59:49 Job created.
2012/04/19.16:59:49 Dispatching job to run on administrative server.
2012/04/19.17:04:03 Drive or volume on which mount attempted is unusable.
ob> lsdev
drive tc-tape in service
ob> pingd tc-tape
Info: drive tc-tape accessible.
ob>
ob> lsdev -lg
tc-tape:
Device type: tape
Model: [none]
Serial number: [none]
In service: yes
Automount: yes
Error rate: 8
Query frequency: 1024KB (1048576 bytes) (from driver)
Debug mode: no
Blocking factor: (default)
Max blocking factor: (default)
UUID: 26934f4f-fe7b-49ce-a3ed-034a7c9ad046
Attachment 1:
Host: osb-server
Raw device: //./obt0
Connection type: SCSI
Inquiry data:
Vendor: HP
Product: C1537A
Firmware: L111
Tape state: online, write protected
Hardware compression: on
Last read was: compressed
Hardware encryption: not available
Maximum block size: 61440
Remaining tape: 3615300 (uncompressed) blocks (3.70GB)
ob>
please guide me resolve this issue ..
Regards
ASA
Edited by: 927832 on Apr 19, 2012 5:10 AMHi Rich
Thanks for your reply.
since i am using a stand alone Tape drive, we will not able to take the inventory , isn't it ?
i hope that my media family parameters are correct only .please find the media family details below.
media family name :- test-media-family
volume id used :- unique to this media family
volume expiration :- 3 years
appendable :- yes
rotation policy & volume duplication policy are ;- none
====================================
While i am mounting the Tape to the drive is gives the following error
ob> mountdev -w test-tape
Error: can't mount volume in test-tape - timed out waiting for bot
ob>
Edited by: 927832 on Apr 20, 2012 3:04 AM -
File System error while restoring a backup from analysis server to another
Hi
I have restored an analysis database backup to from server 1 (sql server 2008) to server 2(sql 2008) and its working fine
and now am trying to restore another database from analysis server server 3 (sql 2005) to server 2 (sql 2008 )but its giving error that
File System error occured while opening the file G:\ProgramFiles\MSAS10.MSSQLSERVER\OLAP\Backup\Workordermodule.0.db\WomDW1.7.00 ..etcHi Maverick,
According to your description, you are experiencing the error when restoring the SSAS 2005 database on SSAS 2008 server, right?
In your scenario, how do you backup your SSAS 2005 database? Please ensure that you backup and restore steps are correct. Here is a blog which describe how to migrate a cube in SQL Server Analysis Services 2005 to SQL Server Analysis Services 2008 step by
step, please refer to the link below.
http://blogs.technet.com/b/mdegre/archive/2010/03/31/migrating-a-cube-in-sql-server-analysis-services-2005-to-sql-server-analysis-services-2008.aspx
Besides, you can import SQL 2005 AS database in SQL 2008 BIDS Project. Then fix AMO warnings and deploy that database on SQL 2008 Server.
http://technet.microsoft.com/en-in/library/ms365361(v=sql.100).aspx
Regards,
Charlie Liao
TechNet Community Support -
Is possible control tape library slot 1 - 10 for file system backup
hi ..
i am new to osb , i just install and setup osb , i have a question as below , hope expert can help me
env: testing
rhel 5.5
tape library with 20 slot
file system backup
1. is possible osb only use slot 1 - 10 for file system backup ? amanda can control slot x - slot y for the configuration .
2. how do i label the tape for slot 1 - slot 10 by obtool ? how to control osb auto load the tape for next backup ? where to check the log say that next tape is tape-02 ?
thanks ..hi dcooksey
how do i use list for a tape drive...for example, if you want tape drive A to only use slots 1-10 from obtool or webtool ?
becoz i new to backup solution & osb ( i always use ghost or acronis to clone the image ) , my thinking as below , pls correct me if i am wrong
slot 1 - 10 for daily backup
slot 11-16 for full system backup
slot 17 - 20 reserve ( this tape only use for full system backup before perform any application upgrade patches , )
daily backup mon - fri ( 2 week ) ( no backup on saturday and sunday ) , server application offline
full system backup friday ( 1 , 14 on calendar ) every 2 week perform full system backup after daily backup completed
for upgrade application ,
perform full system backup after daily backup , then release the server to application team to perform upgrading .
so how to set my media family for the above setting ? the slot configuration is control by media family ?
hope you can help ... -
Oracle DB and File system backup configuration
Hi,
As I understand from the help documents and guides, brbackup, brarchive and brrestore are the tools which are used for backing up and restoring the oracle database and the file system. We have TSM (Trivoli Storage manager) in our infrastructure for managing the backup centrally. Before configuring the backup with TSM, I want to test the backup/restore configuration locally i.e. storing the backup to local file system and then restoring from there. Our backup strategy is to have full online backup on the weekends and incremental backup on the weekdays. Given this, following are the things, I want to test.
1. Full online backup (to local file system)
2. Incremental online backup (to local file system)
3. Restore (from local file system)
I found help documents to be very generic and couldn't get any specific information for the comprehensive configuration to achieve this. Can someone help with end to end configuration?
We are using SAP Portal 7.0 (NW2004s) with Oracle 10g database hosted on AIX server.
Helpful answers will be rewarded
Regards,
ChandraThanks for your feedback. I am almost clear about this issue now, except one point need to be confirmed: do you mean that on linux or unix, if required, we can set "direct to disk" from OS level, but for windows, it's default "direct to disk", we do not need to set it manually.
And I have a further question: If a database is stored on a SAN disk, say, a volume from disk array, the disk array could take snapshot for a disk on block level, we need to implement online backup of database. The steps are: alter tablespace begin backup, alter system suspend, take a snapshot of the volume which store all database files, including datafiles, redo logs, archived redo logs, controll file, service parameter file, network parameter files, password file. Do you think this backup is integrity or not. please note, we do not flush the fs cache before all these steps. Let's assume the SAN cache could be flushed automatically. Can I think it's integrity because the redo writes are synchronous. -
Hi,
We are facing a proble in which our root file system is 100% because of a lot of directories being created in the /proc directory. These directories are created with numbers as their names.
Please give some advice1- It should be nothing to do with proc file system.
2- Somtimes backup command has an 'o' instead of a 0
(zero) in /dev/rmt/"0" and a file "o" is created in
/dev/rmt that fills entire space.
3- If your slice is really large enough, use du -sh
/* command in case solaris 9 (du -sk for 8) to see
which directories are taking space.
4- If you still find nothing and directory sizes
don;t seem to pose any problem, umount all filesstems
and then do a du -sh /*.
Remember, if you have a directory (say /export/home)
filled with stuff, and currently it is not mounted,
It consumes space from / filesystem. When it is
mounted later, the space shown by df -k would show
consumed space for entire Inode table. But du -sk
wont show those files. Indeed those are hidden untill
you unmount the physical slice from /export/homeI had root file system 100% used
I deleted all syslog and messages files, the best I could reclaim was 1%
I did "du -d / |more" to discover sizes of file that may be filling up root file system.
I discovered that in /dev/rmt the size was unusually very large about
2.5GB
There was a file with file name "1" in /dev/rmt which was taking all the space
I did "rm -r 1" to removed the unwanted file and reclaimed 53% free space -
Root File system is reporting that it's full [SOLVED]
My root file system is reporting as full, and I'd like some ideas on how to track the problem. I've tried a number of things like searching for the largest directory, searching for the largest file, and all that jazz. I'm obviously missing something. /dev/sda3 should be at 50%.
One note. The computer started what seemed like normal today. I converted my second hard drive to ext4, rebooted, and started to notice that things that needed the /tmp directory couldn't start. I made some quick space to get operational by removing 56M of stuff from pacman's cache, but that's a quick hack. I don't know if this is related or not. I am running testinskottish wrote:
MoonSwan wrote:
You're a dork who solved this issue and will know better next time. How is this a bad thing? I'm sure someone around here has done worse Skottish, so don't feel too stupid. (Won't name names but I'm sure as well that I've done worse somewhere...)
In the meantime, while you're down...*bonks skottish with the dork-stick*
Thanks for the kind words MoonSwan.
This happened because of the way my system is set up. I have rsync making backups of /home and /etc to /backup on close. It turns out that rsync created the /backup directory instead of using the existing one. Why? Because /dev/sdb1 wasn't mounted when I restarted after the conversion. Doh!
no shame in that. i totally freaked out once when i was still in school because i couldn't find a paper that was due. turned out i had /home unmounted when i saved the file, but had /home mounted when i went looking for it.
it was hiding under the mounted filesystem the whole time!
Maybe you are looking for
-
Does Mixing 802.11n with .11g Devices Slow the Whole Network?
Hi all, I'm considering buying the new Airport Extreme as I also have a new Macbook Pro that supports 802.11n. I also have a couple Airport Expresses on my network, and my question is this: Will the presence of the Airport Express units (which are 80
-
Syncing multiple iPhones with 1 computer
I have my iPhone 4s and my wife has an iPhone 4s. What is the best way to sync with iTunes. I would like to use my 1 account. Will that mess anything up, or is it better to set up both iTunes account.
-
1. Is there any Mail update for OS 10.4.11 users beyond v. 2.1.3? 2. Is there any version of OS 10.5 (Leopard) installable on G4s described below? I know OS 10.5.6 needs a faster processor so cannot be installed. 3. MAIN QUESTION: I have concluded af
-
User name and password for Oracle BI Spreadsheet Add-in
Dear all, I downloaded Oracle Database 10g Express Edition and I installed it successfully. I created a new account. Then I downloaded Oracle Business Intelligence Spreadsheet Add-in and I installed it successfully as well (both on my PC). Now I woul
-
Error message when I try to play music
When I try to play music that I purchased on my phone I get an error message saying "The requested url was not found on this server". What does this mean and what do I do?