File to File output not received using BPM

Hi...
I am doing simple File to File scenario using BPM. Everything id fine. But i am not getting output in receiver side.Could you please help me out in this issue.
Thanks
Leela

Let me tell you ID configuration for this blog...
1)Sender Agreement :
Sender service : Source Service interface : source_ob
Receiver service : BPM
create sender channel
2)Receiver agreement :
   Sender service :BPM    interface : target_abs
   Receiver service : Target service
3)Receiver determination 1:
Sender service : Source service interface : source_ob
Receiver service : BPM
4) Receiver determination 2:
    Sender service : BPM interface : target_abs
    Receiver service : Target
5)Interface determination 1:
      Sender service : Source interface : source_ob
       Receiver service : BPM
Inbound interface : target_abs
Interface mapping : specify the interface mapping name
6)Interface determination 2:
      Sender service : BPM interface : target_abs
       Receiver service : Target
Inbound interface : Target_IB
Interface mapping : N/A
Check the above config with ur configuration

Similar Messages

File to RFC with multiple records using BPM Scenario Error...!!!

Hello Guru's,
I have done the File to RFC with multiple records using BPM scenario as per the Materiel available in the sdn.sap. This involves BAPI (BAPI_MATERIEL_AVAILABILITY). I have done exactly the same what is their in the materiel. SXI_CACHE is also giving return value " 0 ". File is getting deleted from the source directory, but no file in target directory. SXMB_MONI is also showing no error (black Flag). BPM is also error free. Checked the interfaces also.
Can any one tell me what mistake would i have done.
Thanks in advance.

Hi,
There is one similar discussion I found,
FTP TO RFC using BPM
Thanks
Swarup

File to File transfer with a Mail Confirmation using BPM

Hi everyone,
I'm trying to configure a scenario where I will pick a file, send it to the appropriate receiver and send an acknowledgement mail to a mail account.
I have created necessary business process, interfaces, mappings, data types in IR. Also, I have done configuration accordingly in ID.
My question is, how should I design the BPM so that after send/receive file task is complete, it would send a simple message to an email accound which includes a simple text like "message sent"? My scenario will get more complicated later, but for now, this would be more than enough.
I used file sender/receiver and a mail receiver communication channel in ID and configured them. My mail c.c. connects to a smtp server.
For the BPM, I start the process with a "Receive" step with my file interface message. After, there's the "Send" step which sends the file using the same abstract message interface to send the file to my receiver service.
No problem till here. This BPM works ok for these two steps.
For mail option, I added a third step to my BPM which is a "Send" step using the abstract mail interface I had created with a data type which only has a field containing my confirmation message. So, the new BPM is in order:
Receive File - Send File - Send Mail
But, this won't work. In the workflow, I can see a messages saying
Waiting for event 'RECEIVED' of object type 'ZXI_PROXY_G001_MI_IDOC_AB_0001'
and an error at Result Processing - Execution step.
Is this because there's no "Receive" step for my mail interface? How can I configure a simple BPM for this case?
Listing of steps for the BPM would be more than sufficient. Thanks!

Gökhan,
What is the receiver in your case? Bcoz if is synchronous then you can see if its successfully delivered or not and send email based upon the status . If its Asynchronous wht ever the case it might be, u will send an e-mail stating message sent. Could you please clarify the above functionality.
oops!! I'm sorry in your case File is the receiver, even though wht ever happened do u need to send email is it..
raj.

Photoshop cse 5 error "Could not open scratch file because disk is not available" using Maverick

I am getting the following error:
"Could not open scratch file because disk is not available"
I am using Adobe Photoshop CS5 on the Mac Operating System "Maverick". The application is currently loaded on an external bootable drive. I created an external bootable drive using "Disk Utilities". I've changed the directory /private/ to 777 using the following command "chmod -R 777 /private/". I have created the external bootable drive in the event that my current internal drive crashes. I would just then have to swap the drives out. I created the external bootable drive using DYNEX SATA Hard drive enclosure.
Photoshop General Discussion

I searched around and found the answer. My question was to specific. Jim Olvera had the same problem and this was the solution with the help of Adobe Support.
OS X Mavericks. I was able to resolve it after a chat discussion with Adobe support. It is indeed a permissions issue apparently, but not one that can be resolved with Disk Utility. I was able to change to another scratch disk by holding down "Command + Option" as I launched Photoshop, and that did it. Still can't use the previous disk as a scratch, though, even though permissions have been repaired.
JO
Thank you for your suggestion, but I could not even get to the point where "Photoshop" would even open up.
Thank you everyone!

How can i manage old data on my file server that as not been used for over 2 years?

I have 4 file servers and more then 50% of the data is older then 2 years
I would like to move that data to another san, slower but i would like the user to have access by shortcut on there share
Would make it faster to backup because the drive would be 50% less big and would not affect users because they would see the same thing in there share it would just be a little lomnger to open file upon need.
Thanks
I have an environement 2008r2 but can transfert everything to a 2012 r2 if needed
Thanks

robocopy is the tool I recommend to use for that. See that: https://social.technet.microsoft.com/Forums/windowsserver/en-US/51e5f602-b7f2-4d06-adda-1372c30f6250/help-for-script-to-move-old-files?forum=winserverpowershell
You can also add the shortcuts using a script: http://superuser.com/questions/455364/how-to-create-a-shortcut-using-a-batch-script
More if you ask them in the Scripting forum: https://social.technet.microsoft.com/Forums/windowsserver/en-US/home?forum=ITCG&filter=alltypes&sort=lastpostdesc
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile

How to know if a file browser item is not null using javascript fucntion

Hi
 
I tried to use javascript for validation. I have a file browser item named P55_FILE_NAME and I would like to know if this item is null or not before submit.
 
I wrote this function : 
function validate_import(f_n){ 
 if (trim(document.getElementByName(f_n).src) == "") 
 { 
 alert ("File name is empty."); 
 document.getElementByName(f_n).focus(); 
 } 
 else{ 
 doSubmit('SUBMIT'); 
 } 
} 
When I press submit button I got an error, sounds like the src method does not exist in my input item. 
Then, I looked my source page an I found this : 
input type="file" name="p_t01" size="30"
 
there is know src method and the name is not P55_FILE_NAME and I don't want to use p_t01 that will change. 
 
I need your help. 
Benn

Hello,
The p_txx notation is the internal name the ApEx engine attaches to each page item. It starts with p_t01 (for the first item on page) and can end with p_t99 (hence, the max 99 items per page limit). You can see these names in your HTML source code.
The bug in the File Browse item (fixed in version 2.2) is that the ID of the item is the internal name instead of the item name. Hence, in order to use DOM, you need to use this internal notation.
If the File Browse item id is p_t01, you can null its content by using something like that (V2.0 notation) :
html_GetElement('p_t01').value = '';I'm using the same, and similar code, for manipulating this type of item with no problems.
Please document the use of this workaround, as when you'll upgrade your ApEx system, you will have to change this code back to the standard – item id equal item name.
(Please follow Scott's advise, and keep your logic connected issues on the same thread. It will get you more quick and accurate help).
Regards,
Arie.

How do i set system preferences to delete file cache that is not being used

My file cache is using over a GB of memory. How do i set the system to free up memory that is being held but not used?

It's normal since Mavericks for almost all memory to be in use, either by applications or by the file cache. That's what you should want, since unused memory is going to waste. The relevant measure of whether memory is in short supply is what Apple calls "memory pressure."
Apple's explanation of memory pressure is here. If you want a more detailed, technical description, see here, and for the source code, see here.

Detecting and diverting error messages to diffierent receiver using BPM

HI Frndz,
I am working on BPM where i need to detect the message is in error or not, if is it is error it should divert to mail adapter otherwise it should go into idoc adapter(Succesful messages).
I think thorugh BPM we can achive this but i am struck at a point "how only the error messages will get diverted into the mail adapter" ........................
Points will be rewarded based on the solution provided........
Regards
Sai Ganesh

Hi Sai,
Create a Block and place your logic like
receive step to receive the message,
some operation as per your business logic.
send step to send this message to IDOC adapter.
Also create a exception branch in this block to capture if any error occured while processing a message. In the exception branch, insert a send step where you will be sending this error message to MAIL ADAPTER.
Hope this helps!!!
Chrish

File-To-RFC without using BPM

hey guys
is a File-To-RFC scenario possible without using BPM? i have gone through the blog by Arpit Seth ( /people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit ) but it uses BPM.
i am new to XI and not very comfortable with BPM.
please let me know if BPM is the only way out or are there some other methods too.
Also under what circumstances one should use BPM?
thanx in advance.
aamir suhail

Hi,
it's a standard non BPM scenario
(you can find many weblogs like this)
the only different thing is the RFC signature import
(inside repository)
and the use of different channels (file and RFC)
you can find many examples in my XI FAQ
(document section)
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions">XI / PI FAQ - Frequently Asked Questions</a>

I can not receive files via bluetooth from other external devices

I can not receive files via bluetooth from other external devices nokia, samsung and other than apple. I can send files to them but not receive. What is the problem?

I sucessfully transfered files from my Nexus4 to MBP via Bluetooth
1. Go to system preference and select Sharing.
2. Check the Bluetooth sharing.
3. Specify directory to which you want to recieve files from Blue tooth device.
4. Turn Blue tooth off and make it on.
Your MBP is now ready to recieve files from Andoriod phone.

N:1 File to File Scenario..

Hi Experts,
I am trying to do N:1 file to file scenario. Input source directory contains 5 files and each file consists of many of records and i want all the entries in input files need to be transformed to single ouput file.
Example:
Input files
File1 : ABC
File2 : DEF
File3 : EFG
File4 : HFG
Output file:
File0: ABC
         DEF
         EFG
         HFG
How we can achive this?
Regards,
Srini

Hi
doing a N:1 mapping, you need a BPM. This is possible only with a transformation step.Without BPM it's not possible.Use BPM collect pattern to collect your multiple file into one file.
N:1 Mapping this blog help u
IDOCs (Multiple Types) Collection in BPM
look BpmPatternCollectMerge
BPM with Patterns explained Part-1 //part1
BPM with Patterns explained Part-2 //part2

Proxy ack not received in PI

Hi experts,
Good Morning !!!
I am not getting proxy ack to PI
for file to proxy
how we will get Ack from receiver Abap proxy?
and we can view in PI if the ack is received or not ??
Please tell me any one
Thanks in advance
Regards,
Ravi

Hi Ravi,
As per my understanding your scenario is File to proxy.
You should use BPM to receive acknowledgement.
File adapter does not support acknowledgements..
Refer the below link
FAQ: XI 3.0 / PI 7.0 / PI 7.1 / PI 7.3 File Adapter
Refer 6th question..
Regards
Bhargava Krishna

N:1 Multimapping using bpm

hi all,
i am doing multiple file to single file that is n:1 mapping using BPM. please send me link for the same or give some suggestion regarding this.
thanks ,
Anup Banerjee

Hi,
You can use any of the collect message pattern provided. In your case any one of the following can be used:
1. BpmPatternCollectMessage
2. BpmPatternCollectTime
->There are some patterns in SWC : SAP BASIS --> namespace : http://sap.com/xi/XI/System/Patterns In ESR of your SAP PI System.
-> please go through this blogs it will help you.
Correlation Runtime Behavior of BPM.
http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/10526. [original link is broken] [original link is broken]
In Configuration By using of BPM.
-> two communication channels one for sender and one for receiver
-> 2 receiver Determinations
one for Sender to IP.
One for IP to Receiver.
-> 2 Interface Dtermination
one for Sender to Ip
one for IP two Receiver
-> 1 Sender agrement.
-> 1 receiver agrement for (IP to Receiver)
regards,
ganesh.

Help needed in Multiple Receivers sceenarios using BPM

Hi,
I am new to BPM. As per my requirement, based on a business logic i may split the messages into two at message mapping. If i have spitted the messages into two, it should go to different receivers. Or if my logic hasnt splitted the mesaage means it should go to any one of the receivers. I also expect response from the receiver system once its done successfully.
Could you help me how to do this using BPM?
Thanks & Regards,
Senthil.

Hi,
You can do it without BPM also, by using MultiMapping. If only splitting is required then I would suggest not to use BPM since it will consume much memory. Instead you can use multmapping.
For Multimapping, go to messages tab in message mapping and select your different target structures and map it as per your requirement. In Integration Directory, go to advanced Interface Determination and proceed.
Br,
Madan Agrawal
Edited by: Madan Agrawal on Feb 12, 2009 8:25 AM

Doubt in file to file scenario

can i transfer a flat file (notepad) from sender to receiver using following configuration
Adapter Type: File Adapter
Transport Protocol: File System (NFS)
Message Protocol: file
Adapter engine: Integration server

Hi,
Check out this Blog
/people/shabarish.vijayakumar/blog/2006/04/03/xi-in-the-role-of-a-ftp
You can use the same logic either for FTP or for NFS
Thanks,
Prakash

File to File output not received using BPM

Similar Messages

Maybe you are looking for