File to file scenario using BPM

Hi,
Did you check in RWB--Communication channel monitoring or SXMB_MONI for the reason?
Thanks!

Hi,
The problem is when i insert the xml file in the sender directory I don receive the output file.
1) while checking the CC please check whether your file is being picked-up from the sender directory.
2) Is your file format the one that you have given in the sender CC? (XYZ.xml, XYZ.txt....)
3) See if the return code of your BPM is 0.....login to SAP GUI --> go to transaction SXI_CACHE -->select Integration Process and see for your BPM....if it is not 0 then use the Repeat Activation option (available above the BPM list).
I also want to kno why do we need to use BPM?
If you are talking about the use of BPM in this aprticular blog, then please note that this scenario can be done without a BPM also....BPM is used just to show the basic functinality.....
How to decide whether your scenario requires a BPM depends on the requirements...refer this checklist for more info:
http://help.sap.com/saphelp_nw70/helpdata/EN/1c/287842f9e03654e10000000a155106/frameset.htm
Regards,
Abhishek.

Similar Messages

Could any one provide me with the links of file to file scenario using BPM

Could any one provide me with the links of file to file scenario using BPM

Hi,
omit RFC part
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions">XI / PI FAQ - Frequently Asked Questions</a>

Alerts-Idoc to File Scenario using BPM

Dear all,
At the sender side,I am sending 2 Idoc's orders03,orders04 Idocs I am Merging in to single at my mapping level and sending to the respective receivers.
When even some error occurs at system level or application level,an alert must be sent to the respective valid receipents.
My question is,when creating the Alert Rule how to use the interfaces(orders03,04) (here I have multiple senders).
Is Alert rule required in BPM scenario's?if not let me know how alerts would be triggered for bpm scenarios.
Thanks,
Srini

Hi,
Let me see if I had you requirement correct.
When the Idoc is sent from R3, sender partner type is LS and Receiver Partner Type is LI.
If yes,
1. Create a Party in ID.
2. The Agency , Scheme and Identifier will have values,
Agency --> Receiver Business System name or Business Service Name to be used for File.
Scheme --> ALE#LI
Identiier --> Value of the RCVPRN field in the idoc control Record. Basically the Receiver Partner Name.
All the Configuration In ID will use this Party as the Receiver Party and the corresponding Service asthe Receiver service.
No need for a sender party as sender partner is LS.
Regards
Bhavesh

File to RFC scenario using BPM : a synchronous one

Hi All
I am doing File>RFC>File scenario using BPM with help of the blog
RFC Scenario using BPM --Starter Kit
here everything is explained but i am getting error while the processing of BPM part
Input file is being picked (this part is success) but rest BPM and response i am not getting back in .
interface names
filereq_MI >Filetoabstract_MI>Sync_MI>RFCtoabstract_MI>Fileres_MI
(abstract means its an abstract interface)
i have configuered the Integration process as follows
Start>Recieve>synch_send>send>end
step : Recieve
mode : asynch
message:Filetoabstract_MI
step : synch_send
mode : synch
synch interface : synch_send
req message:Filetoabstract_MI
res message : RFCtoabstract_MI
step : send
mode : asynch
message:RFCtoabstract_MI
and i have given interface mapping during second (synch_send) step but here mapping is giving problem its showing exception error during mapping
error is there
1) Integration process ---> file
2) Integration process-->R/3 system

Hi,
Configure the Integration Engine According to this Blog and Trigger the Process again
Configuration of a Central Integration Server
Regards
Seshagiri

Soap to File Scenario with BPM

Hi Guys
I have create my Soap to File Scenario using BPM to split the file on "Transformation step" into 7 files and it must save these files to my FTP Server, when testing on sxmb_moni I don't get any errors but when checking on the FTP server no files are created, and I understand that it should be showing all seven processing on the sxmb_moni, but that is not happening.
I have used the ForEach mode on my Block.
What could I be doing wrong.
Thanks!!
Yonela

go to runtime work bench to see communication channel, especailly the receiver channel.
To see what happened on it

File to file error using BPM

Hi...
I am doing File to File scenario using BPM. I am getting the below error. Could you please help me out in this.
Runtime error
Unable to read payload from the message object

Check the mapping indepently i.e go to Interface Mapping and give the input xml from the SXMB_MONI and test it.
Probably problem with some tranformations ,format.
if problem persists
There seems to be an issue with the XML files.
Correct them and try to open the XML file in IE.
During the testing of the mapping, please set the trace level to all and test the mapping once again.
reward points if found helpfull
regards
chandra.k

File to SOAP Scenario Using BPM

Hi,
I am doing File to SOAP scenario using BPM.
while doing Integration Process in IR, i got the following error message
"Expression of simple type xsd:string expected"
But i have given xsd:string in the correlation element as well as in Data types.
I dont know why it is getting the error.
could you anyone please help me to sort out?
Regards,
Sai Ch.

Hey,
Check in the correlation editor, where you define the condition.
Whether the data type of the XPath is string and whether it matches with the data type of the messages that you have selected.also make sure the type of the correlation variable is string.
regards,
Milan

File to IDOC Scenario using BPM

Hi Experts,
    I am working on file-Bapi-Idoc scenario using BPM.
    I have two conditions
1. If the Sonumber is populated then need trigger an Bapi_change
2.If the Sonumber is not populated from the file then need to trigger a Bapi_Createfromdat to create the sales order and receive the salesorder number as response from Bapi
and the response of these BAPIs should be validated whether the Bapi is successful or not.
If it is successful message then need to trigger IDOC or else should throw an alert message.
let me know the steps involved in this scenario.
can i send alert message to other email IDs or can i send it to only XI admin?
Please let me know u r inputs.
Thanks in advance
Praveen

Hey,
You need to have a BPM for this.
BPM design.
Recieve step(abstract asynchronous) for file structure
Switch Case(condition whether sonumber is populated or not)
if populated
Branch 1(of switch)
    transforamtion step:- mapping between File and Bapi_Change(Request structure)
Send step(abstract syncronous) To send the BAPI_change
Branch 2(of switch)
transformation step:-mapping between file and BApi_Create
Send step(abstract synchronous) To send the BAPI_Create
Block step(which will include the Switch step)
    trigger an Execption in case of an error(in any of the two branches) through the block
    The Exception will trigger an alert.
Now after the Block step there will be a transformation step(which will have the mapping between RFC response and Idoc)
Next is the send step(abstract asynchronous) for the idoc
In case if there is no exception the Idoc will be triggered or the exception branch will trigger the alert
rewards points if useful
regards,
      Milan

File to File scenario using Transport Protocol FTP Problem

Hi,
my scenario is a file to file scenario using Transport Protocol FTP
there are 3 systems involved
a. computer 1 ( My system-source)
b. computer 2 (XI server)
c. computer 3 (Target system)
I want XI to pick file from computer 1 and post it to computer 3
I am logging on to XI server from computer 1(thro SAP GUI),
Sender communication channel :
Transport protocol:FTP
Messsage protocol: file
In FTP connection Parameters:
Server: computer 1 IP address
port:21
User name and PW---> I have given computer 1 Username and password.
Connection mode: permanently
Transfer mode: Binary
Folder: C:\ftproot\output
filename : given
In Receiver Communication Channel
Transport protocol:FTP
Message protocol: file
In FTP connection Parameters:
Server: computer 3 IP address
port:21
User name and PW---> I have given computer 3 Username and password.
Connection mode: permanently
Transfer mode: Binary
Put File: Use Temporary File
Folder:
eccserver\saploc\tmp
filename scheme: given
When I activate the scenario file is not getting picked from the source
In Adapter Framework: Message says up and running No message processing now
How to check FTP server is up and running on computer 1 (source system)and Computer 2 (XI server)?
What could be the problem ?
Thanks
dushanth

Hi
Consider that I dont have FTP installed on my computer. According to this blog
/people/shabarish.vijayakumar/blog/2006/08/01/along-came-a-file-adapter-mr-ftp-and-rest-of-the-gang
I have configured.
In sender comm channel I have given Ipaddress of computer 1 (which has a file to be picked)
In Receiver Comm channel I have given IP address of computer 3 (in which file to be posted)
and computer 2 is the XI server
Computer 1 has FTP installed
1. XI server should have FTP installed or not ? IF yes is it FTP client or FTP server or Guild FTP (according to the blog is enough)
2. Computer 3 should have FTP installed or not ?
Please help me I am really confused.
Thanks
dushanth

RFC Scenario using BPM

I did whatever mentioned in that blog(/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit). Also I do have some experience in BPM.
After testing I don't see the file inthe outbound directory. So I started analysing from all sides.
1. First checked the message in my sxi_monitor, it black and white flag showed that the message processed successfully.
2. I opened the message and saw the message from CENTRAL Client passed to PE ADAPTER Client with tooltip showing "Transfer to Process engine".
1. First I checked whether my BPM is correct by pressing F7. There is no syntax error.
2. I checked in sx_cache, the ReturnCode was 0.
3. In smq2 I saw a message stuck in the PE queue. I double clicked the queue and saw the status text as "Permanent error in BPE inbound processing". So I kept debugging by pressing F8 and after that the message got disappeared.
4. I opened the message in sxi_monitor, and after the CENTRAL Client the message passed to PE ADAPTER, which measn the meesage has got transferred to process engine. But i'm not seeing any change in the file.
5. Also what I did was use transaction SXMB_MONI and chose process radio button and execute. Located my message but there is no task value which starts with 'WS..' in Process def column.
Can you please pinpoint where i went wrong and anything else?
One more thing, everytime i test the new file the file goes and gets stuck in the queue and I have got to follow the item 3 mentioned above.
Thanks,

Hi Kishore, The second block is a synchronous send block in the BPM triggers the call to RFC. I've done it as per the blog. There is no transformation step in the BPM. Anyway I fixed the issue. In the receive block whatever container value I used should be used in the send block also. Earlier I was getting some warning. Now my BPM is clean and it worked.
Lesson learnt: Ensure there is no warning in the BPM. Thanks again Kishore.
Thanks,
Edited by: XISearch on Apr 29, 2011 5:20 AM
Edited by: XISearch on Apr 29, 2011 5:24 AM
Edited by: XISearch on Apr 29, 2011 5:24 AM
Edited by: XISearch on Apr 29, 2011 5:25 AM

Integrtion Scenario using BPM with two sender and multiple receiver

integrtion Scenario using BPM with two sender and multiple receiver
How many Application Components are required?

Hi Vinod,
1) In integration repository you can have one or many software components it depends on your landscape orchestration
2) In integration direcory you need at least one service for bpm and one or many for each system in your bpm
also each connection between systems and bpm must have receiver determination and so on.
Advice: Please treat BPM as a separate system.
best,
Wojciech

Blogg RFC scenario using BPM - starter kit (more detail on BPM required)

I follow this blog to the letter - because it is the same as my scenario:
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit
The problem is I have no experience with BPM. I have setup the Integration process as I think it should be but I get an error.
Could one of you experts go through the BPM steps in more detail? Screen shots/details of the properties and containers on each step would be very useful. Thanks.

Hi Lynn!!
Check this SAP help for certain requirements when to use BPM:
http://help.sap.com/saphelp_nw04/helpdata/en/cb/15163ff8519a06e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/08/16163ff8519a06e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/0e/56373f7853494fe10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/11/13283fd0ca8443e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/ca/7c5c41fe06cf1ee10000000a155106/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/e8/8e2d4233c8db2ce10000000a1550b0/content.htm
Take a look at this blog by Michal,
/people/michal.krawczyk2/blog/2005/09/16/xi-how-to-test-your-mapping-in-real-life-scenarios
/people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm - Walk through BPM
/people/siva.maranani/blog/2005/05/22/schedule-your-bpm - Schedule BPM
/people/sriram.vasudevan3/blog/2005/01/11/demonstrating-use-of-synchronous-asynchronous-bridge-to-integrate-synchronous-and-asynchronous-systems-using-ccbpm-in-sap-xi - Use of Synch - Asynch bridge in BPM
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken] - Use of Synch - Asynch bridge in BPM
Check this weblog for a step by step procedure:
/people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit
or case study go thru this blog:
/people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm
for checklist:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3bf550d4-0201-0010-b2ae-8569d193124e
Take a look at this blog for some very good guidelines on when to use BPM's and when not to use BPM,
/people/swen.conrad/blog/2006/12/22/xi-ccbpm-performance-under-perform-or-out-perform
Thanks !!
Pls reward if useful

Issue in File to RFC to File Scenario with BPM using Block Step

Hi Everybody,
                       I am doing File to RFC to File Scenario for multiple records using BPM using Block Step. The File Message is getting posted and after that, the message is getting stuck up in the qRFC Monitor (Inbound Queue).
                    After seeing the message in Inbound Queue, I am trying to execute and release the message. But when i execute the LUW, it says " Function module doesnt exist or EXCEPTION raised" in Inbound queue.
Could somebody suggest me the outcome of this? What does this mean and how to
release the stuck up message in Queue.
Thanks and Regards,
N.Jayanth Kumar

Hi Rajesh,
                       After going through the blog, i saw the trace messages. It says
" The   exception occurred (program: CL_SWF_XI_INBOUND=============CP, include CL_SWF_XI_INBOUND=============CM00F, line: 19)"
Regards,
N.Jayanth Kumar

SFTP to File Scenario using multiple files

Hi All,
I have a scenario wherein 2 separate CSV files ex a.csv and b.csv has to be picked up from the SFTP folder and the same has to be mapped and send to one single file ex c.csv.
Say a.csv contains fields Name,Address and b.csv contains Phone,Mobile and I need to map them as per FSD into c.csv which will then have Name,Address,Phone,Mobile
I am bit confused on how to do it.
Shall I use Additional File name option in SFTP sender channel configuration? In that case how will I use the FCC as we have 2 separate csv files and both the files are CSV files and needs to be converted to XML.
Any related threads will help.
Regards,
Shaibayan

Hi Inaki,
Thanks for your reply.
BPM is not an option in our case as we are told not to use BPM.
However as per the thread from Michael
"pick both files in one run (one as file, the other one as attachment - so one communication channel )
inside the mapping you can get the values from the attachment and do the mapping"
This part is fine and we can do the mapping by creating N:1 mapping but since our files are .csv files so a content conversion is required for both the a.csv and b.csv. How to go through with this.
The structure will be something like below in the message mapping after we add both the source structures in Signature Tab:
Message
     Message1
          MT_FILE_A
               RecordSet1
                    Name
                    Address
                    Field3
     Message2
          MT_FILE_B
               RecordSet2
                    Phone
                    Mobile
Can I use the below values for Content Conversion?
Document Name:MT_FILE_A,MT_FILE_B
Recordset Structure:RecordSet1,*,RecordSet2,* or we have to use MT_FILE_A.RecordSet1,*,MT_FILE_B.RecordSet2.*
And in the Name Value for Name do we need to use dot for each Document Name i.e.
MY_FILE_A.RecordSet1.fieldSeparator?
Regards,
Shaibayan

File - to - JDBC- to - File Scenario using Stored Procedure

Hi,
I want to do File - to - JDBC - to - File scenario, because I'm getting data in a file format and that data i want to load in a database. Database level i have a stored procedure. if any exceptions. my stored procedure will give the Response. so, now i want to store that resposne in a file..
for this. what are the steps we have to use. is this scenario will comes in Synch ronous or Asynchronous ? and I have searched the web blogs also. al the blogs are related to Http or Soap with JDBC . so, please give me some input help about this...
how many data types we have to create... any body having step step procedure for this...
regards
Jain

Hi,
You will need a BPM in your design as Sender File adapter does not support Synchronous messaging. Refer my answer in this thread (page 2) and have your design accordingly....instead of RFC you will have a file adapter as the ultimate receiver.
Re: BPM FILE--> JDBC--> RFC
Just take care of below things:
1) JDBC message format is as per the guidelines
[Message format for sending req to JDBC|http://help.sap.com/saphelp_nw04/helpdata/en/2e/96fd3f2d14e869e10000000a155106/content.htm]
2) check for the format of your source and target file format (if it is a Flat-file with a xml structure that XI can parse then no need of FCC but if it is a CSV file then you will need FCC)
Regards,
Abhishek
Edited by: abhishek salvi on Apr 14, 2009 7:32 PM

File to file scenario using BPM

Similar Messages

Maybe you are looking for