File--to--File should get acknowledment after successful processing

Hi,
Here my scenario is File-to-File scenario.
1)Once files get successfully transfered to the receiver system i shud get successful message,
2) if not i have to get an Error message .
Can anyone help me in this
Thanks,
keerthi.

Hi keerthi,
you should go for BPM in this case.
File adapter can only work with the transport acknowledgments
ACKNOWLEDGEMENTS:-
APPLICATION ACKNOWLEDGEMENTS & TRANSPORT ACKNOWLEDGEMENTS.......
transport acknowledgments - they tell us that the message was transferred from the XI adapter
(successfully or with errors)
- application acknowledgments - they tell us that the message was processed by the receiver application
(again either successfully or with errors)
refer to note: 821267
The specified item was not found.
Thanks,
Madhu
Reward points if it is helpful
Edited by: Madhu on Jul 14, 2008 1:17 PM

Similar Messages

  • File adapter - archiving files after successful processing & errors

    Hi All
    In sender file adapter, I understand that we can archive files after processing them.
    After successful processing, we can archive the file, and if there are any errors, we can archive the file in a different folder (all files resulting in errors during processing are archived in a seperate folder).
    Now, see this scenario.
    My file is successfully picked up, processed and posted to receiving sap system thru proxy.
    But, if there is any application specific error (ex: duplicate id), because of which this data cannot be processed in the receiving system, how can i move the file which is archived in successful messages folder to the folder where we archive error messages?
    Is it possible?
    This is required because, when there are these kind of errors with incorrect data, we want the corresponding file to be archived in the folder where erred files are archived.
    Please let me know how we can achieve this.
    Many Thanks
    Chandra

    in file sender CC, thr is option to archive and error file store also..
    1)under processing mode - archive.. give the path thr..
    2) To archive source files where a permanent error occurred during processing, select Archive Faulty Source Files
    http://help.sap.com/saphelp_nwpi71/helpdata/en/44/658abd344a4de0e10000000a1553f7/frameset.htm

  • Create a trigger file after successfully processing of a regular file?

    Hi,
    I have 10 differet proxy-tofile scenario interfaces going to one target system (10 different transcational data sets). For each interafce after creating the file (fixed file name file1.txt), PI has to create/append a file called "trigger file" which has different structure with fine name, file creation date/time etc. and kind of file (all or delta) which comes from proxy.
    So if file1.txt (all) has created, after that PI has to create "trigger file" with:
    file1.txt 20110106 all
    So if file2.txt (changes), another interface with different transaction, is created, we need to append "trigger file" with:
    file1.txt 20110106 all
    file2.txt 20110106 delta
    Can I do this scenario without BPM, in Integrated Configiration, we are in PI 7.1 EHP1.
    Regards,
    N@v!n

    Hi All,
    Let me try to put the question differently for the same scenario. I have completed dev with two message mappings, two operation mappings (one for regular file and one for tigger file). In ID, I am using the Integrated Configuration (with multiple receivers; here I created 2 communication components, one for regular file, another one for trigger file). This scenario works fine, creates regular file and trigger file. Only thing is it creates trigger file even regular file fails, we dont want to create a trigger file when the regular file creation fails..... since we have lof of scenario like this, we want to use integrated configuration only......I have tried to use one operation mapping (with multiple message mappings with in it), but looks like Integrated Configuration doesn't support this.
    So if I have one operation mapping with 2 message mappings in it, does operation mapping fail when one of the message mapping fails? At the end all we wanted to do create a file when ever the regular creats successfully. Pleae help me with the design. Let me know if you need more info.
    Thank You,
    N@v!n

  • PI FTP: Process 1 file at a time until it is successfully processed at the target system

    Dear Experts,
    As the title said, I'm required to process 1 file at a time and only process the next file after the previous file has been successfully processed at the target system. The interface scenario is asynchronous FTP to ABAP proxy.
    It is similar with the following link:
    File adapter to pick a single file
    I think there could be 2 feasible solutions:
    1. Configure EOIO at the sender CC. According to this link:
         Queues for Asynchronous Message Processing (SAP Library - SAP NetWeaver Exchange Infrastructure)
         It is stated that "Once the message has been processed successfully in the target system, the Integration Engine executes an implicit database commit."
         In the case of asynchronous FTP to ABAP proxy, will the PI wait for the ABAP proxy to finish processing the file before sending the next one?
    2. Configure locking at the ABAP program in ECC. I could ask the ABAPer to create a locking mechanism to lock the document before it is posted to BAPI. If the reference document is being locked, it will try again for the next second up to a certain times before it gives up.
    Which 1 is actually fits the requirement?
    Thank you,
    Suwandi C.

    Dear Experts,
    Sorry, just 1 more question which I'm curious.
    In NFS adapter we have the option to set the processing sequence to by Name / Date.
    In FTP will it only by Date?
    According to this link:
    https://help.sap.com/saphelp_nw73/helpdata/en/f9/17888f490846a9972628525cc28aac/content.htm
    "Messages are delivered with the same queue names (supplied by the application) in the same sequence that they were sent from the sender system"
    If it is in the same sequence sent by the sender, I guess it is in the Date order for FTP. Is that correct?
    Thank you,
    Suwandi C.

  • Flash player loading files very slow and getting stuck after 100%

    Hello all,
    I have an issue with my development and need your help and feedback for the same:
    I  have developed various E-Learning courses which was published some in  Flash Player 9 and some with version 10. Since Flash Player 10.1 was  introduced all my developed courses was running fine. But it's found  that user who are using Flash Player 10.1.85.3 is facing issue with file  loading and playing the courses. Some time Flash player fails to load the  chapters and files after preloading 100%, and sometime it's very slow in  loading performance. I like to intimate that all these was not happening  with Flash player version 10. Please give me any idea where I am going  wrong. Is this kind of issue possible? If anyone faced the same experience. Please give me your valuable feedback.
    Please  Note: I have faced an scenario that, suppose a user is stuck with loading  the course, and after getting stuck he clear his browser cache, and  immediately after that the same player start working fine. And loading  the course chapter properly. Need help to get rid of this kind of  situation.
    Thank you
    Amitava D

    Hello all,
    I have an issue with my development and need your help and feedback for the same:
    I  have developed various E-Learning courses which was published some in  Flash Player 9 and some with version 10. Since Flash Player 10.1 was  introduced all my developed courses was running fine. But it's found  that user who are using Flash Player 10.1.85.3 is facing issue with file  loading and playing the courses. Some time Flash player fails to load the  chapters and files after preloading 100%, and sometime it's very slow in  loading performance. I like to intimate that all these was not happening  with Flash player version 10. Please give me any idea where I am going  wrong. Is this kind of issue possible? If anyone faced the same experience. Please give me your valuable feedback.
    Please  Note: I have faced an scenario that, suppose a user is stuck with loading  the course, and after getting stuck he clear his browser cache, and  immediately after that the same player start working fine. And loading  the course chapter properly. Need help to get rid of this kind of  situation.
    Thank you
    Amitava D

  • Windows 2008 R2 Client computer backup files (*.dat) can't get restored after re-imaging the Windows 2008 R2 server

    I have a Windows server 2008 R2 and I'm using backup feature to backup all computers in the network on it. Recently I ran into an issue and had to re-image my Windows 2008 R2 server  and had to restore 2 of my client computers but now I can't restore
    files from my client computer backups because they are not listed under Backups & Devices anymore however all backup files are still available on my Backup drive. How can I retrieve files from these backup files?

    Anyone out there to help me with this issue?

  • Appraisee should get access after Part Appraisal in "HAP_DOCUMENT"  BSP Application

    Dear All,
    Your valuable Inputs are strongly needed ....
    Requirement: After Part Appraisal completion,  Appraisee should access the document by his own ID to give the comments.
    Client is using "HAP_DOCUMENT"   BSP application on ESS.
    Document movement is successful till Part Appraisal, but after this Appraisee is Not getting the BSP document to give his comments.
    We are using following settings in PHAP_CATALOG_PA:
    For Part Appraisal:  Status 'In Process'  and  Sub-Status 'Part Appraisal'  -  Standard
    After Part Appraisal for  Appraisee:  Status 'In Process'  and  Sub-Status 'Overall Appraisal'  -  Standard
    Button Used for Appraisee:  "Send to Final Approval".
    We also have applied BADI  HRHAP00_BUT_ACCESS, HRHAP00_COL_access  for corresponding Status and Sub-Statuses.
    In PHAP_CATALOG_PA also we have done all the settings for Appraisee and Relevant columns, but still the same problem.
    If it is Not possible, then Suggest any other way  so that Appraisee can access the BSP document and give his comments after "Part Appraisal".
    It is really very Urgent, Kindly suggest how to achieve this ???
    Very Thanks,
    Edwin

    Dear All,
    Pls. help, its really urgent.
    Thanks

  • SAP Dispatcher getting stopped after successful DB restore sql server 2005

    Dear Experts,
    I have installed SAP ECC 6.0 with MSS 2005 on Windows 2003 x64. MSS DB and thereafter
    SAP installtion was successful. I also logged on the system and checked a few things. Then we
    performed a PRD data  DB restore using MSS Management Studio and DB restore completed successfully.
    Then we take a restart and tried to start SAP. Primarily I found it is starting and then when it come Dispatcher
    getting stopped once i restarted the server also I tried with r3trans -d and its not executing  please check the developer trace
    and my server work directory in zip format  attached please check the attachment
    please help me to sort out this issue
    Best Regards
    SURESH .M
    SAP BASIS CONSULTANT

    Hi deepak ,
    please check the trans log iam attached
    r3trans -d getting return code 0012
    please check it
    4 ETW000 r3trans version 6.14 (release 700 - 18.09.06 - 09:35:00).
    4 ETW000 unicode enabled version
    4 ETW000 ===============================================
    4 ETW000
    4 ETW000 date&time   : 19.06.2014 - 16:57:13
    4 ETW000 control file: <no ctrlfile>
    4 ETW000 R3trans was called as follows: r3trans -d
    4 ETW000  trace at level 2 opened for a given file pointer
    4 ETW000  [dev trc     ,00000]  Thu Jun 19 16:57:15 2014                           41662  0.041662
    4 ETW000  [dev trc     ,00000]  db_con_init called                                   142  0.041804
    4 ETW000  [dev trc     ,00000]  create_con (con_name=R/3)                            181  0.041985
    4 ETW000  [dev trc     ,00000]  Loading DB library 'dbmssslib.dll' ...               138  0.042123
    4 ETW000  [dev trc     ,00000]  load shared library (dbmssslib.dll), hdl 0         47141  0.089264
    4 ETW000  [dev trc     ,00000]      using "D:\usr\sap\PRD\SYS\exe\uc\NTAMD64\dbmssslib.dll"
    4 ETW000                                                                             130  0.089394
    4 ETW000  [dev trc     ,00000]  Library 'dbmssslib.dll' loaded                        40  0.089434
    4 ETW000  [dev trc     ,00000]  function DbSlExpFuns loaded from library dbmssslib.dll
    4 ETW000                                                                              63  0.089497
    4 ETW000  [dev trc     ,00000]  Version of 'dbmssslib.dll' is "700.08", patchlevel (0.72)
    4 ETW000                                                                           28593  0.118090
    4 ETW000  [dev trc     ,00000]  function dsql_db_init loaded from library dbmssslib.dll
    4 ETW000                                                                              75  0.118165
    4 ETW000  [dev trc     ,00000]  function dbdd_exp_funs loaded from library dbmssslib.dll
    4 ETW000                                                                              70  0.118235
    4 ETW000  [dev trc     ,00000]  New connection 0 created                           11925  0.130160
    4 ETW000  [dev trc     ,00000]  0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
    4 ETW000                                                                             163  0.130323
    4 ETW000  [dev trc     ,00000]  db_con_connect (con_name=R/3)                         56  0.130379
    4 ETW000  [dev trc     ,00000]  find_con_by_name found the following connection for reuse:
    4 ETW000                                                                              60  0.130439
    4 ETW000  [dev trc     ,00000]  0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
    4 ETW000                                                                              74  0.130513
    4 ETW000  [dev trc     ,00000]  Thread ID:2196                                     16796  0.147309
    4 ETW000  [dev trc     ,00000]  Thank You for using the SLOLEDB-interface             54  0.147363
    4 ETW000  [dev trc     ,00000]  Using dynamic link library 'D:\usr\sap\PRD\SYS\exe\uc\NTAMD64\dbmssslib.dll'
    4 ETW000                                                                              76  0.147439
    4 ETW000  [dev trc     ,00000]  dbmssslib.dll patch info                              84  0.147523
    4 ETW000  [dev trc     ,00000]    patchlevel   0                                      37  0.147560
    4 ETW000  [dev trc     ,00000]    patchno      72                                     30  0.147590
    4 ETW000  [dev trc     ,00000]    patchcomment MSSQL: Thread check in DbSlDisconnect (969143)
    4 ETW000                                                                              54  0.147644
    4 ETW000  [dev trc     ,00000]  np:(local) connection used on PSPRD1                 195  0.147839
    4 ETW000  [dev trc     ,00000]  CopyLocalParameters: dbuser is 'prd'                  44  0.147883
    4 ETW000  [dev trc     ,00000]  Using Provider SQLNCLI                             46841  0.194724
    4 ETW000  [dev trc     ,00000]  OpenOledbConnection: MARS property was set successfully.
    4 ETW000                                                                             419  0.195143
    4 ETW000  [dev trc     ,00000]  ExecuteAndFlush return code: 0x80040e14 Stmt: [if user_name() != 'prd' setuser 'prd']
    4 ETW000                                                                          121982  0.317125
    4 ETW000  [dev trc     ,00000]  ExecuteAndFlush: line 6324. hr: 0x80040e14 Setuser failed because of one of the following reasons: the database principal 'prd' does not exist, its corresponding server principal does not have server access, this type of database principal cannot be impersonated, or you do not have permission.
    4 ETW000                                                                             211  0.317336
    4 ETW000  [dev trc     ,00000]  sloledb.cpp [ExecuteAndFlush,line 6324]: Error/Message: (err 15157, sev 0), Setuser failed because of one of the following reasons: the database principal 'prd' does not exist, its corresponding server principal does not have server access, this type of database principal cannot be impersonated, or you do not have permission.
    4 ETW000                                                                             168  0.317504
    4 ETW000  [dev trc     ,00000]  Procname: [ExecuteAndFlush - no proc]                 38  0.317542
    4 ETW000  [dev trc     ,00000]  setuser 'prd' failed -- connect terminated            68  0.317610
    4 ETW000  [dev trc     ,00000]  Using Provider SQLNCLI                              6271  0.323881
    4 ETW000  [dev trc     ,00000]  OpenOledbConnection: MARS property was set successfully.
    4 ETW000                                                                             215  0.324096
    4 ETW000  [dev trc     ,00000]  ExecuteAndFlush return code: 0x80040e14 Stmt: [if user_name() != 'prd' setuser 'prd']
    4 ETW000                                                                            8723  0.332819
    4 ETW000  [dev trc     ,00000]  ExecuteAndFlush: line 6324. hr: 0x80040e14 Setuser failed because of one of the following reasons: the database principal 'prd' does not exist, its corresponding server principal does not have server access, this type of database principal cannot be impersonated, or you do not have permission.
    4 ETW000                                                                             122  0.332941
    4 ETW000  [dev trc     ,00000]  sloledb.cpp [ExecuteAndFlush,line 6324]: Error/Message: (err 15157, sev 0), Setuser failed because of one of the following reasons: the database principal 'prd' does not exist, its corresponding server principal does not have server access, this type of database principal cannot be impersonated, or you do not have permission.
    4 ETW000                                                                             141  0.333082
    4 ETW000  [dev trc     ,00000]  Procname: [ExecuteAndFlush - no proc]                 37  0.333119
    4 ETW000  [dev trc     ,00000]  setuser 'prd' failed -- connect terminated            53  0.333172
    4 ETW000  [dev trc     ,00000]  Using Provider SQLNCLI                              6308  0.339480
    4 ETW000  [dev trc     ,00000]  OpenOledbConnection: MARS property was set successfully.
    4 ETW000                                                                             209  0.339689
    4 ETW000  [dev trc     ,00000]  ExecuteAndFlush return code: 0x80040e14 Stmt: [if user_name() != 'prd' setuser 'prd']
    4 ETW000                                                                            8393  0.348082
    4 ETW000  [dev trc     ,00000]  ExecuteAndFlush: line 6324. hr: 0x80040e14 Setuser failed because of one of the following reasons: the database principal 'prd' does not exist, its corresponding server principal does not have server access, this type of database principal cannot be impersonated, or you do not have permission.
    4 ETW000                                                                             122  0.348204
    4 ETW000  [dev trc     ,00000]  sloledb.cpp [ExecuteAndFlush,line 6324]: Error/Message: (err 15157, sev 0), Setuser failed because of one of the following reasons: the database principal 'prd' does not exist, its corresponding server principal does not have server access, this type of database principal cannot be impersonated, or you do not have permission.
    4 ETW000                                                                             286  0.348490
    4 ETW000  [dev trc     ,00000]  Procname: [ExecuteAndFlush - no proc]                 42  0.348532
    4 ETW000  [dev trc     ,00000]  setuser 'prd' failed -- connect terminated            55  0.348587
    4 ETW000  [dev trc     ,00000]  failed to establish conn to np:(local).             6478  0.355065
    4 ETW000  [dev trc     ,00000]  Retrying without protocol specifier: (local)          49  0.355114
    4 ETW000  [dev trc     ,00000]  Using Provider SQLNCLI                               123  0.355237
    4 ETW000  [dev trc     ,00000]  OpenOledbConnection: MARS property was set successfully.
    4 ETW000                                                                             214  0.355451
    4 ETW000  [dev trc     ,00000]  ExecuteAndFlush return code: 0x80040e14 Stmt: [if user_name() != 'prd' setuser 'prd']
    4 ETW000                                                                           14045  0.369496
    4 ETW000  [dev trc     ,00000]  ExecuteAndFlush: line 6324. hr: 0x80040e14 Setuser failed because of one of the following reasons: the database principal 'prd' does not exist, its corresponding server principal does not have server access, this type of database principal cannot be impersonated, or you do not have permission.
    4 ETW000                                                                             128  0.369624
    4 ETW000  [dev trc     ,00000]  sloledb.cpp [ExecuteAndFlush,line 6324]: Error/Message: (err 15157, sev 0), Setuser failed because of one of the following reasons: the database principal 'prd' does not exist, its corresponding server principal does not have server access, this type of database principal cannot be impersonated, or you do not have permission.
    4 ETW000                                                                             141  0.369765
    4 ETW000  [dev trc     ,00000]  Procname: [ExecuteAndFlush - no proc]                 38  0.369803
    4 ETW000  [dev trc     ,00000]  setuser 'prd' failed -- connect terminated            53  0.369856
    4 ETW000  [dev trc     ,00000]  Using Provider SQLNCLI                               886  0.370742
    4 ETW000  [dev trc     ,00000]  OpenOledbConnection: MARS property was set successfully.
    4 ETW000                                                                             226  0.370968
    4 ETW000  [dev trc     ,00000]  ExecuteAndFlush return code: 0x80040e14 Stmt: [if user_name() != 'prd' setuser 'prd']
    4 ETW000                                                                            8706  0.379674
    4 ETW000  [dev trc     ,00000]  ExecuteAndFlush: line 6324. hr: 0x80040e14 Setuser failed because of one of the following reasons: the database principal 'prd' does not exist, its corresponding server principal does not have server access, this type of database principal cannot be impersonated, or you do not have permission.
    4 ETW000                                                                             122  0.379796
    4 ETW000  [dev trc     ,00000]  sloledb.cpp [ExecuteAndFlush,line 6324]: Error/Message: (err 15157, sev 0), Setuser failed because of one of the following reasons: the database principal 'prd' does not exist, its corresponding server principal does not have server access, this type of database principal cannot be impersonated, or you do not have permission.
    4 ETW000                                                                             145  0.379941
    4 ETW000  [dev trc     ,00000]  Procname: [ExecuteAndFlush - no proc]                 37  0.379978
    4 ETW000  [dev trc     ,00000]  setuser 'prd' failed -- connect terminated            53  0.380031
    4 ETW000  [dev trc     ,00000]  Using Provider SQLNCLI                              6315  0.386346
    4 ETW000  [dev trc     ,00000]  OpenOledbConnection: MARS property was set successfully.
    4 ETW000                                                                             229  0.386575
    4 ETW000  [dev trc     ,00000]  ExecuteAndFlush return code: 0x80040e14 Stmt: [if user_name() != 'prd' setuser 'prd']
    4 ETW000                                                                            8701  0.395276
    4 ETW000  [dev trc     ,00000]  ExecuteAndFlush: line 6324. hr: 0x80040e14 Setuser failed because of one of the following reasons: the database principal 'prd' does not exist, its corresponding server principal does not have server access, this type of database principal cannot be impersonated, or you do not have permission.
    4 ETW000                                                                             122  0.395398
    4 ETW000  [dev trc     ,00000]  sloledb.cpp [ExecuteAndFlush,line 6324]: Error/Message: (err 15157, sev 0), Setuser failed because of one of the following reasons: the database principal 'prd' does not exist, its corresponding server principal does not have server access, this type of database principal cannot be impersonated, or you do not have permission.
    4 ETW000                                                                             144  0.395542
    4 ETW000  [dev trc     ,00000]  Procname: [ExecuteAndFlush - no proc]                 34  0.395576
    4 ETW000  [dev trc     ,00000]  setuser 'prd' failed -- connect terminated            53  0.395629
    4 ETW000  [dev trc     ,00000]  failed to establish conn. 0                         6497  0.402126
    4 ETW000  [dblink      ,00431]  ***LOG BY2=>sql error 0      performing CON [dblink#3 @ 431]
    4 ETW000                                                                           11973  0.414099
    4 ETW000  [dblink      ,00431]  ***LOG BY0=><message text not available> [dblink#3 @ 431]
    4 ETW000                                                                              55  0.414154
    2EETW169 no connect possible: "DBMS = MSSQL                            ---  SERVER = 'PSPRD1' DBNAME = 'PRD'"
    Best regards
    suresh

  • File is not getting deleted in File-RFC-File without BPM

    Hi,
    I'm working on File-RFC-File scenario without BPM. Everything is working fine except file is not getting deleted after the process. I'm passing xml file here and in return it will give the xml success/error message from RFC.
    For the sender CC, I'm passing the following parameters,
    Transsport protocol: File system
    Message protocol: File
    QoS: BE
    Poll Interval: 30 sec
    Mode: Delete
    File type: Binay
    Please let me know if I missed anything while passing the values.
    Thanks,
    Swamy
    Edited by: Swamy Mothe on Jun 15, 2009 8:52 AM

    Hi
    Then , is Sender and receiver File Adapter is using same folder )
    Just a question.
    But having all permisions and above config would delete the file
    can u see the status of u r File Adapter in RWB.? Is it in green?
    rgds
    srini

  • XML Parsing of a file which keeps getting appended by another process

    Hi:
    What's the best method to parse an XML file as it's getting appended by another process. I need a functionality similar to UNIX "tail -f" where the reader waits for more input after reading is complete.
    I am getting SAXParseException because the end root tag is not yet written but the parser thinks it has finished reading the file.
    Any help will be appreciated.

    I would not use a file, a better solution would be to use a message pipeline. The (JAXM) Java API for XML Messaging, is designed to do this type of task.
    http://search.java.sun.com/ClickThru?url=http%3A%2F%2Fjava.sun.com%2Fxml%2Fjaxm%2F&qt=JAXM&pathInfo=%2Fjava&hitNum=1&col=jsun0&col=jsun1

  • Create .txt empty file After Message Processing Command Line Linux command

    Hi All,
    An empty .txt file has to be created in FTP location(FTP loc c:\xyz\Customer20082910.txt) only after the .dat file has been created(FTP loc c:\xyz\Customer20082910.dat)
    Note:.dat has the actual data and .txt is an empty file and is created only after .dat is created
    I know that .txt empty file can be created using the After Message Processing Command Line...
    But confused which command to be given such that it will be created in the FTP location(c:\xyz\Customer20082910.txt)
    Can any one please give the Linux command for it...
    Regards,
    Sridhar

    Hi Aamir,
    Thanks for the suggestion, I will ask my client to create a shell script at FTP server...
    And one more question,
    This is reverse side , now the .dat file is to be picked only if .txt exists at the FTP server (scenario File > XI>SAP) (earlier was SAP>XI>File)..
    So please can you suggest for this also...
    How can i check for the .txt and pick corresponding .dat file...
    i had posted question long back
    Need to pick .TXT file only if .CTL file is available
    Regards,
    Sridhar

  • Getting error after when trying to print managed session bean property.

    Hi All,
    I am reading a file from my local machine. After reading a file , i am storing file details in the property of the same bean.
    After that i am trying to preint contents of that file in one jsp by accessing that stored managed bean property.
    But I am getting following error:
    Nov 15, 2009 2:33:41 PM com.sun.faces.lifecycle.LifecycleImpl phase
    WARNING: executePhase(RENDER_RESPONSE 6,com.sun.faces.context.FacesContextImpl@138c63) threw exception
    javax.faces.FacesException
         at com.sun.faces.lifecycle.RenderResponsePhase.execute(RenderResponsePhase.java:135)
         at com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:251)
         at com.sun.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:144)
         at javax.faces.webapp.FacesServlet.service(FacesServlet.java:245)
         at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
         at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
         at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:233)
         at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191)
         at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:128)
         at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102)
         at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
         at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:293)
         at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:849)
         at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:583)
         at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:454)
         at java.lang.Thread.run(Unknown Source)
    Caused by: ClientAbortException:  java.net.SocketException: Connection reset by peer: socket write error
         at org.apache.catalina.connector.OutputBuffer.doFlush(OutputBuffer.java:319)
         at org.apache.catalina.connector.OutputBuffer.flush(OutputBuffer.java:288)
         at org.apache.catalina.connector.Response.flushBuffer(Response.java:548)
         at org.apache.catalina.connector.ResponseFacade.flushBuffer(ResponseFacade.java:279)
         at com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:201)
         at com.sun.faces.lifecycle.RenderResponsePhase.execute(RenderResponsePhase.java:106)
         ... 15 more
    Caused by: java.net.SocketException: Connection reset by peer: socket write error
         at java.net.SocketOutputStream.socketWrite0(Native Method)
         at java.net.SocketOutputStream.socketWrite(Unknown Source)
         at java.net.SocketOutputStream.write(Unknown Source)
         at org.apache.coyote.http11.InternalOutputBuffer.realWriteBytes(InternalOutputBuffer.java:740)
         at org.apache.tomcat.util.buf.ByteChunk.flushBuffer(ByteChunk.java:434)
         at org.apache.coyote.http11.InternalOutputBuffer.flush(InternalOutputBuffer.java:299)
         at org.apache.coyote.http11.Http11Processor.action(Http11Processor.java:973)
         at org.apache.coyote.Response.action(Response.java:183)
         at org.apache.catalina.connector.OutputBuffer.doFlush(OutputBuffer.java:314)
         ... 20 more
    Nov 15, 2009 2:33:41 PM org.apache.catalina.core.StandardWrapperValve invoke
    SEVERE: Servlet.service() for servlet Faces Servlet threw exception
    java.net.SocketException: Connection reset by peer: socket write error
         at java.net.SocketOutputStream.socketWrite0(Native Method)
         at java.net.SocketOutputStream.socketWrite(Unknown Source)
         at java.net.SocketOutputStream.write(Unknown Source)
         at org.apache.coyote.http11.InternalOutputBuffer.realWriteBytes(InternalOutputBuffer.java:740)
         at org.apache.tomcat.util.buf.ByteChunk.flushBuffer(ByteChunk.java:434)
         at org.apache.coyote.http11.InternalOutputBuffer.flush(InternalOutputBuffer.java:299)
         at org.apache.coyote.http11.Http11Processor.action(Http11Processor.java:973)
         at org.apache.coyote.Response.action(Response.java:183)
         at org.apache.catalina.connector.OutputBuffer.doFlush(OutputBuffer.java:314)
         at org.apache.catalina.connector.OutputBuffer.flush(OutputBuffer.java:288)
         at org.apache.catalina.connector.Response.flushBuffer(Response.java:548)
         at org.apache.catalina.connector.ResponseFacade.flushBuffer(ResponseFacade.java:279)
         at com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:201)
         at com.sun.faces.lifecycle.RenderResponsePhase.execute(RenderResponsePhase.java:106)
         at com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:251)
         at com.sun.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:144)
         at javax.faces.webapp.FacesServlet.service(FacesServlet.java:245)
         at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
         at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
         at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:233)
         at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191)
         at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:128)
         at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102)
         at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
         at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:293)
         at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:849)
         at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:583)
         at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:454)
         at java.lang.Thread.run(Unknown Source)There is no specific reason mentioned for this error. Anyone has faced this problem before?
    Whats wrong here?

    Hi gimbal2,
    I haven't deployed the project yet. I am still in development phase. I am using eclipse. So i am using inbuilt browser from eclipse only.
    I saw this post on the same forum:
    http://forums.sun.com/thread.jspa?threadID=5297862
    This person had the same problem. But his question is not answered yet.
    People here are saying:
    *1)page is getting submitted more than once. Either because the user is clicking on the commandbuttons/links multiple times or through some other event.*
    ->I am not using any javascript. But problem here is whenever i try to load file from my local machine, in first attempt it wont proceed. I need to load file twice or thrice. Is it some problem?
    But one thing to note here is that i am not getting exception after loading the file. I am getting exception after reading the file in managed bean and returning from it with some status.
    *2)This exception can be caused by the browser closing its end of the socket for any number of reasons (user presses stop loading button, clicks another link, closes the browser window, etc.):*
    ->I am not pressing any button or doing any activity once i load the file.
    *3)Sounds like it should be caught and ignored since these are normal user actions. I was just concerned it might be causing some kind of impact that we don't know about.*
    ->I can't ignore it because, my next JSP is not getting loaded after i return from the read file bean.
    Hope People here can help me solve this problem. I am not able to proceed :(

  • Scenario PROXY - SENDER FILE - RECEIVER FILE

    Hi Experts,
    I need to create a synchronous scenario where the proxy sends the filename to send and PI must transfer the file to a location X. The source file is in a different location of the destination file 
    This scenario, should this be done through Process Integration?
    Thanks,

    Hi,
    I think you can use a sync/async bridge to do your scenario and you wont need any development outside of using standard modules. The idea is to create a scenario Proxy(sync)-File(Async) -File (Async) without BPM. Check the point 8 in this document http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/80f96dbf-adca-3010-ffb5-daf2d1f0e276?QuickLink=index&…
    I have never tested this with the SFTP channel, and i dont know if this adapter supports the RequestOneWayBean and WaitResponseBean modules. May be you should wait to someone that confirms to you the possibility of using this modules with the SFTP adapter.
    Regards.

  • Prevent auto data deletion of records from gl_interface table after success

    Hello All,
    I currently developing the journal conversion.
    I have successfully imported some sample journal data.
    But the problem here is i am not able find the successfully uploaded journal data in the gl_interface table.It is getting deleted after successful import.
    How to prevent this deleted, i want that data to be available in the gl_interface table.
    Any setup needs to be done for this?
    Oracle ebs version : 12.1.1
    Thanks & Regards
    aboothahir

    any suggessions on the above query?
    Thanks & regards
    Aboo

  • What file extension should I see after doing a complete PSE backup?

    I repetedly have had problems getting back a catalog after getting a new computer, getting an additional hard drive, etc.  So...when I do a complete back up, what file name extension should I see, so that I am POSITIVE that I can get my catalog back later, with all tags? Or is that too much to expect?
    (1) For instance, after doing a complete backup recently, I only see a "My Catalog.psb" file in the folder.  When I go to get the file loaded back into my new PSE 9 program (no matter if I "restore" or "convert" or whatever) from my old PSE 7, PSE will only look for a .tly file, so I  can't even choose that .psb file.  Also, my tags are usually nested within subcategories.  Can I get those nests back, too?
    (2)  I have given up and re-imported all of my photos, which at least brings in a list of tags that are on each photo.  But,I have to rebuild all the subcategories and tags underneath those subcategories.  UGH.
    So, what do I look for to make sure I have a correct backup file, and will I get everything back like I see it?  Or will it look different? Please post easy instructions - I am not an expert with PSE (because if I was, I wouldn't still be having the same problems year after year when I update PSE).

    Done!!  It took lots of effort, and lots of trial and error, but I figured
    out what I had been doing wrong...I had been confusing CATALOG with a FULL
    BACKUP.  To me, they were one and same but now I know they aren't.   Who
    knew?
    For those who read this thread in the future who only convert a catalog once
    every two or three years, like me (which means it is not very easy to
    remember what to do) here's what I found out when I was trying to load a
    PSE7 catalog into my new PSE9 program. (Please correct me if I am wrong
    about anything.)
    1)  Before you do anything, I suggest that you make a Full Backup of the
    catalog of  the older PSE program (the catalog you will soon import into to
    the newer PSE program) .  This will make it easier on you, rather than
    converting several incremental backups.
    2)  Open up the newest version of your PSE, holding down the Shift key as
    the Elements Organizer opens up.  This will open up the Elements Catalog
    Manager.
    3)  In the Catalog Manager go to "Convert" (top right corner)
    ...You may be lucky and automatically see the catalog you used in your older
    program listed here.  If so, skip to #8.
    I wasn't so lucky, so I had to do the following...
    4)  Click on "Find More Catalogs".
    5)  Navigate to the Adobe Photoshop Elements folder (usually located at
    C/Program Data/Adobe/Photoshop Elements),
    6)  Now here's the important part:
    ...Double click on the folder you see with the NAME OF THE CATALOG YOU WISH
    TO IMPORT (the catalog used in your older program).  When you do this, it
    will find your most up to date backup.
    ...Do not click on the folder that has your latest backup in it (it won't
    do anything no matter how much you try). THE BACKUP IS NOT YOUR CATALOG.  To
    me it seemed logical that it was, but to the Photoshop Elements program it
    was not...how was I to know?
    7)  After you double click on the folder with the name of the catalog you
    wish to import, you will see a line pop into the "Convert Catalog" box.
    8)  Highlight the line with the name of your older catalog in the "Convert
    Catalog" box, and click on "Convert" at the bottom of that box. Name your
    new catalog. Your tags, nesting, and photos should now all import into your
    newer version of Photoshop Elements.
    Finally...success for me!  Thank you SO MUCH for all of your help.  It
    steered me in the right direction, and taught me a few new tricks as I
    researched my problem.  I really appreciate your help!
    Note to Adobe Help Manual Writers:
    If only someone had written clearer directions on how to do this, I might
    have saved several days of anguish.  Please do not assume we know and
    understand your lingo.  Please do not assume that things will automatically
    load. Tell us what to do if they don't...AND what to do if our navigation
    to what we think is the right place doesn't work.  *A couple of sentences
    like this would have helped tremendously: "A catalog is not a backup.  When
    you navigate, make sure you are clicking on a catalog folder with the name
    of the catalog you wish to convert.  Don't click on a backup folder because
    that won't mean anything to the program."  *Please assume we will make
    mistakes, and when you see a pattern of people making the same mistake
    (having trouble importing catalogs, for instance), use that information to
    write better directions.

Maybe you are looking for