File to idoc adapter   :IDOC IS POSTED IN XI but showing error EDI partner

Hi ,
my interface is working fine but issue is that in Recver R3 system idoc is in errors status 56 (EDI partner profile not available.
I already define business system which is used to send data from XI.
My Business system name is testBsys1 for sender XI service.
In R3 i have created logical system testBsys1
and in we20 already created partner profile testBsys1
and also maintain in bound parameter.
please suggest me where is i am doing mistake.

Hi Mohit,
How is the control record of the posted Idoc made in PI? Check the Control Record of The IDoc that is posted in R3, it is not having correct information.
IF you are not making the control records in PI  mapping, then in the receiver IDoc, keep apply control records from payload as checked.
Regards
Suraj

Similar Messages

  • FILE TO IDOC SCENARIO-Receiver Business system ECC showing Red

    HI
         In File-idoc scenario Business system showing red status in RWB .And i have given the role for the business system as application server and configure related integrated server . But the error in a RWB  for the ping and self-test is as follows
         Unable to log on to system buss_ecc_200 in language en with user PIRWBUSER .
    I thing from XI side every thing is ok. But for bussiness system side ECC might miss some configuration .
           could any help in this issue:
    regards..

    Hi
    Please try one of the followings:
    1) In Configuration --> Business service --> Service --> Adapter specific identifiers. Give logical system name for the sender system (e.g XI_00_800)
    2) In Design --> mapping objects. Give all information of sender n receiver in EDIDC40 segment and
       In configuration --> receiver communication channel in that enable the checkbox take sender from payload.
    3) In configuration --> Receiver Agreement --> Header mapping --> Sender Service (Give XI1 i.e ur sender system).
    Also check the RFC destination that is the major problem with idoc...

  • PO is getting created but showing error is address with status of IDoc - 51

    Hi Experts,
    I am using IDoc type  - PORDCR103
    Process code - copy of  IDOC_INPUT_PORDCR1 (Function Module)
    After processing through WE19 it is generating an IDoc number with status - 51 showing error in Address , But it is creating a PO.
    My requirement is In status -51 It should not create PO.
    Inside IDOC_INPUT_PORDCR1 a Bapi  'BAPI_PO_CREATE1' is used for creating PO. Here In RETURN parameter of BAPI a Row is comming with Message type - E.  Some other messages are also there of type 'S' and 'W'.
    After processing ,  PO is getting created with staus - 51.
    Please help me .
    Thanks
    Susanta
    Edited by: Susanta22 on Oct 11, 2011 12:29 PM

    Hi,
    in ur code ur filling the idoc data rcord, control record ryt ..before u append data to idoc data , u r also validating and u might be doing in loop for appening the idoc data.
    if there is any error in idoc then it won't distribute the data, it will be in error status only..u can only see the data in WE02. Then u can also change the data in WE02 and redistirbute it via BD87.
    if u have any conerns let me know
    Regards,
    Nagaraj

  • Database files list on one drive in master.sys.master_files, but show on another in the file system

    We have a one node cluster sql server instance where the machine was patched/updated and re-booted this past weekend.  The machine came up, but the SQL Server did not because it could not locate RestoreCheckpointDB24.ckp on an
    M drive.  If I RESTOREFILELISTONLY on my backups everything was clearly on an N drive previously.  To get by the error, our network team changed a registry key pointing to
    N drive to M drive and everything magically came up.  The file system and failover cluster manager are now showing all files to be on an
    M drive, but if you query master.sys.master_files everything is showing on the
    N drive.  Anyone know how this is possible and how to resolve???
    As well, a log shipping session is now broken because it's copying to a missing
    N drive and my Management->SQL Server Logs folder is empty as well. 
    Any ideas?  I'm completely baffled as well as our network guys. 
    Thanks!

    I'm thinking your problem is:
    "To get by the error, our network team changed a registry key pointing to N drive
    to M drive
    and everything magically came up."
    That's called a hack and hacks usually have unexpected and adverse consequences.
    And in more than 15 years of working with SQL Server I've never had to use a registry change to make SQL Server work.  As a personal best practice I avoid making manual changes to the registry at all costs.

  • IDOC is posting with Errors in File to IDOC scenario

    Hi,
       I did the File  to IDOC scenario for CREMAS  . IDOC is posting with Errors .. i.e. in the status record it was showing  56- EDI: Partner profile inbound not available  ..
    If I manually process that IDOC in WE19 , then it was processing successfully..    and in the  we19 it was showing Inbound Processing : Port Not Maintained    but even though manually it was posting fine...
    any ideas regarding this will be appriciated..... 
    Regards
    Babu

    Please check whether you had done the following assuming your doing File to Idoc
    Settings in your Business service for the receiving system
    Please specify the RFC detination, SAP System and Client of the Receiving System in the adapter specific detials.
    Settings in R/3
    WE20 - Add the partner profile for the particular message type cremas and process code.
    Your statement
    " and that same logical system name  had given as Message Specific Attributes in the Sender Business Sevice parameters in I.D "
    Please do mention R/3 Details in the receiver business service or system.
    Thnz

  • Posting  multiple records from file to idoc

    Hi Exerts,
       i have done scenario to post one record from file to IDOC, to post multiple records from file to idoc what are the options to be modified in the scenario.
    thanks,
    dhanush

    Hi Dhanush,
      You need to change the occurance of idoc to 0 to unbounded ie need to opt idoc packaging.
      Just download the xsd of you idoc to the desktop and change the occurance tag as "<xsd:element name="IDOC" type="COND_A.COND_A02" maxOccurs="unbounded" />" and then reimport it into External definition and use it in your message mapping and then map it with you source structure.
    Regards,
    Prasanthi.

  • IDocs not created in file to IDoc scenario

    Hi all
    I am trying this file to IDoc scenario.
    File picked up successfully and sent to R/3 Backend…But Idoc is not posted…the status records
    In /n we05 in R/3 Backend shows that EDI: Partner profile inbound not available
    I created/tested all basics like RFC dest, port etc.
    File service that I am using is a business service …hence I am specifying a Logical system name in
    <b>Adapter specific Identifiers</b> of the file service.
    I disabled EDI_DC40 control tag record as IDoc adapter
    takes care of it.
    So at first I tried the configuration of IDoc comm. Channel by checking the Apply control record values from payload
    But SXMB monitor gave an error regarding this control record tag…I guess as we have disabled it so there won’t be any values
    for control record in payload (correct me if I am wrong).
    So I unchecked the checkbox Apply control record values from payload and monitor showed up as successfully processed.
    But in the backend I am getting this error regarding partner profile.
    I also tried to use an existing profile (<b>LS</b> type) by modifying it’s inbound parameters to accept <b>CREMAS</b> Idoc.
    But the error is as persistent as me
    Pls help
    Sudhir

    Hi
    Sender --> LEGACY, maintained in SLD (Logical system).
    Receiver--> ENI maintained in SLD with logical sys name M700.
    Partner Profile LEGACY maintained in R3.
    <b>Following is the IDocOutbound in SXMB monitor in XI</b>.
      <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Response
      -->
    - <SAP:IDocOutbound xmlns:SAP="http://sap.com/xi/XI/Message/30">
      <SAP:TABNAM>EDI_DC40</SAP:TABNAM>
      <SAP:MANDT>100</SAP:MANDT>
      <SAP:DOCREL>640</SAP:DOCREL>
      <SAP:DOCNUM>0000000000001013</SAP:DOCNUM>
      <SAP:DIRECT>2</SAP:DIRECT>
      <SAP:IDOCTYP>CREMAS03</SAP:IDOCTYP>
      <SAP:CIMTYP />
      <SAP:MESTYP>CREMAS</SAP:MESTYP>
      <SAP:MESCOD />
      <SAP:MESFCT />
      <SAP:SNDPOR>SAPAXI</SAP:SNDPOR>
      <SAP:SNDPRN>LEGACY</SAP:SNDPRN>
      <SAP:SNDPRT>LS</SAP:SNDPRT>
      <SAP:SNDPFC />
      <SAP:RCVPOR>SAPENI</SAP:RCVPOR>
      <SAP:RCVPRN>M700</SAP:RCVPRN>
      <SAP:RCVPRT>LS</SAP:RCVPRT>
      <SAP:RCVPFC />
      <SAP:TEST />
      <SAP:SERIAL />
      <SAP:EXPRSS />
      <SAP:STD />
      <SAP:STDVRS />
      <SAP:STATUS />
      <SAP:OUTMOD />
      <SAP:SNDSAD />
      <SAP:SNDLAD />
      <SAP:RCVSAD />
      <SAP:RCVLAD />
      <SAP:STDMES />
      <SAP:REFINT />
      <SAP:REFGRP />
      <SAP:REFMES />
      <SAP:CREDAT>0000-00-00</SAP:CREDAT>
      <SAP:CRETIM>00:00:00</SAP:CRETIM>
      <SAP:ARCKEY>DF57A2C0532811D9AD84000F206A031B</SAP:ARCKEY>
      </SAP:IDocOutbound>
    <b>Control record of IDoc in R3</b>
    Tab: Typeinfo
         Basic type-->CREMAS03
         Message Type-->CREMAS
    Tab: Partner
         Recipient
          Port  -->SAPENI
          Partner Number--> M700
          Partner Type-->LS
         Sender
          Port  -->SAPAXI
          Partner Number--> LEGACY
          Partner Type-->LS
    Pls help
    Regards
    Sudhir

  • File to IDOC scenario error...

    Hi all,
    we hhave created an File to Idoc scenario .
    we are getting the following error in SXMB_MONI t-code.
    <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
      <SAP:Category>XIAdapter</SAP:Category>
      <SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_INV_SND_SERV</SAP:Code>
      <SAP:P1>BUS_SENDER</SAP:P1>
      <SAP:P2 />
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText />
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack>Unable to convert sender service BUS_SENDER to an ALE logical system</SAP:Stack>
      <SAP:Retry>M</SAP:Retry>
      </SAP:Error>
    can any one plz say wat this error might be..
    TIA
    Regards,
    Raj

    Hi,
    The problem occurs when sender and receiver business system or business service does not have a logical system name.
    ID - Integration Directory
    Posting the IDOC'S into SAP R/3 System, sender and receiver business system or business service requires the logical system name. If the business system (Web As ABAP) does not have the logical system name, then add the logical system for business system.
    If business system type = Web AS ABAP, then add the Logical system in Technical System level and Save.
    If business system type = Third-Party, then add the logical system in business system level and Save.
    If the business service does not have the logical system name in ID, it needs to be configured as follows.
    Go to ID and click the Business service -> Services -> Adapter Specific Identifiers. Enter the logical system name and Save.
    Apply and activate.
    hope this will help you.
    regards
    Aashish Sinha
    PS : reward points if helpful

  • How to convert XML into idocs and post in ECC using PI

    Hello All,
    I want to configure the scenario like this MDM->PI->ECC. Using FTP I am getting able to fetch the xml file from MDM Server Ready folder. Now, I need to convert this XML file into Idocs and post it in ECC. Can anyone provide me step by step configuration in PI to achieve this. I have configured communication channel with adapter type Idoc in Itegration Builder. But, I am not sure where it will do the conversion of XML into Idoc and how do post it to ECC. I am working first time on PI 7.1. I have worked on XI 3.0 in 2006-2007. Any help to configure this step by step shall be appreciated.
    Thanks & Regards,
    Hemal

    In you have the XML from MDM you have to use the mapping provided by the funtionals in the Funtional specification documents. once you did it you must configure the Receiver IDoc Adapter. and later dont fonget to configure properly the ReceiverAgreement.
    as you receive the docuement from MDM via FTP, thats not a SAP System that means that you have to define PI as the sender of the IDoc,otherwise you will have the Error "Unable to convert the sender service to an ALE logical system"
    to do that in the receiver Agreement>Header Mapping>Sender System-->Select PI server.
    Take in mind to send IDocs to any SAP System, the system that send it must be a SAP system too. thats why you configure it
    http://help.sap.com/saphelp_nw04/helpdata/en/5d/112d20f6ce6c46ba66afb98d278fbd/frameset.htm
    Another thing is you have configure the ALE distribution Model.
    se this:
    http://wiki.sdn.sap.com/wiki/display/XI/FileToIDOC
    /people/michal.krawczyk2/blog/2005/03/29/xi-error--unable-to-convert-the-sender-service-to-an-ale-logical-system
    /people/venugopalarao.immadisetty/blog/2007/01/24/troubleshooting-file-to-idoc-scenario-in-xi
    Let us know
    Rodrigo P-.

  • Partner Profile not fnd (file-to-idoc)

    Hi,
    Idoc in r/3 failed with 56 error. Partner profile not found.
    partner profile was set up (between XI logical system and R/3 system) in R/3 server.
    Control record of idoc is showing sending system as MDMSBX01 with port SAPXI0. Actually, MDMSBX01 is the source sytem(file server). I can't even find this port SAPXI0 in IDX1. Not sure, how this got picked up.
    I was testing the scenario by using <b>"test message" in Integration Engine(RWB)</b> since I do not have access to FTP server. I am sure this is causing to pick up wrong source system(instead of XI server system as source). Please clarify.
    Below is XML message from MONI.
      <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Response
      -->
    - <SAP:IDocOutbound xmlns:SAP="http://sap.com/xi/XI/Message/30">
      <SAP:TABNAM>EDI_DC40</SAP:TABNAM>
      <SAP:MANDT>100</SAP:MANDT>
      <SAP:DOCREL>700</SAP:DOCREL>
      <SAP:DOCNUM>0000000000011006</SAP:DOCNUM>
      <SAP:DIRECT>2</SAP:DIRECT>
      <SAP:IDOCTYP>CREMAS05</SAP:IDOCTYP>
      <SAP:CIMTYP />
      <SAP:MESTYP>CREMAS</SAP:MESTYP>
      <SAP:MESCOD />
      <SAP:MESFCT />
      <SAP:SNDPOR><b>SAPXI0</b></SAP:SNDPOR>
      <SAP:SNDPRN><b>MDMSBX01</b></SAP:SNDPRN>
      <SAP:SNDPRT>LS</SAP:SNDPRT>
      <SAP:SNDPFC />
      <SAP:RCVPOR>SAPEC0</SAP:RCVPOR>
      <SAP:RCVPRN>EC0CLNT100</SAP:RCVPRN>
      <SAP:RCVPRT>LS</SAP:RCVPRT>
      <SAP:RCVPFC />
      <SAP:TEST />
      <SAP:SERIAL />
      <SAP:EXPRSS />
      <SAP:STD />
      <SAP:STDVRS />
      <SAP:STATUS>03</SAP:STATUS>
      <SAP:OUTMOD />
      <SAP:SNDSAD />
      <SAP:SNDLAD />
      <SAP:RCVSAD />
      <SAP:RCVLAD />
      <SAP:STDMES />
      <SAP:REFINT />
      <SAP:REFGRP />
      <SAP:REFMES />
      <SAP:CREDAT>2007-04-20</SAP:CREDAT>
      <SAP:CRETIM>14:36:52</SAP:CRETIM>
      <SAP:ARCKEY>40697C80EF8711DBB286000F203CD31A</SAP:ARCKEY>
      </SAP:IDocOutbound>

    Hi,
    as explained by Ahmad, see the Partner profile os created or not in , R3 system,
    At the same time in receiver Idoc adapter select the  apply control record from payload checkox .As per moni , the parner profile is in xml, so try to see the partner profile is created in R3 by TcWE21,check for inbound messgae type the said Idoc is existed or not and the corresponding process code is selected or not..
    Regards
    Chilla

  • File to IDOC - issue with partner profile

    I have done File to IDOC scenario and tested it end to end successfully. For same have done all require configuration setting in R/3 like defining logical System and partner profile. And it sends new IDOC successfully in R/3 with status code 50 (IDoc added).
    But when I create new logical system and partner profile in R/3 and when I use same logical system in my above mention scenario then my new generate IDOC in R/3 return status code 56 (EDI: Partner profile inbound not available). But same scenario work fine with my earlier partner profile. Here I have done all require changes at adapter level like adapter specific identification and same new logical system I have update in SLD with my business system Logical System Name.

    Hi Bhavesh,
    Thanks for your reply.
    In control record, I checked with sender and receiver partner. In this sender partner is new partner profile which I have created with port details. Receiver partner has logical system name which I have mentioned in my SLD for my receiver business system. But in receiver partner don’t have any port details.
    But still it has same problem.
    -Sunil

  • Error in executing scenario File to Idoc

    Hi,
        I did File to Idoc scenario.
      In that I got error in status record at r/3 system...
    status record code is 51....Error is <i>Application document not posted</i>
    regards,
    pavani

    Hi Ravi,
    i mapped some of the data fields. Control fields i disabled them....
    Can you giv me wat are the importent fields for Cremas04...
    I did all the field that are indicated in red color..
    still i m getting error
    Message was edited by:
            Pavani Kumari Kokkiragedda

  • File to IDOC - Error Inbound -56

    Hi,
       I am doing file to Idoc. (CREMAS01).. My scenario in
    RWB is successful. But in R/3 it is shwoing IDOC
    error :"EDI: Partner profile inbound not available".
      I created Partner Profile in R/3(logical name of BS-
    sender file). Still is shwoing Error.
    Regards,
    Mukharji
    Message was edited by: Mukharji T

    Hi Mukharji,
    I hereunder give you the step by step procedure for File to IDOC scenario.  Cross check whether you have done all these:-
    SLD
    1) Create a Product/Software Component
    2) Technical System pointing to R/3 system
    3) Business System for the above technical system
    In the Repository
    1) Import the Software component created in the sld
    2) Create a namespace,
    3) import the idoc and then create sender data type/message type etc and mapping
    4) Mapping Rules is depends on the requirement
    In the Directory
    1) Create a Scenario /import the business system
    2) Create Receiver/Interface determination
    3) Create communication channels for sender and receiver
    4) Sender Agreeement and Receiver Agreement.
    Then the file adapter configuration is depend on the input file format.
    Also you need to have Logical destionation created in the XI , and the IDX1 entry
    In R/3 Port, Partner profiles etc should be created
    Have a look into this document~
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/877c0d53-0801-0010-3bb0-e38d5ecd352c
    While doing an File -> XI -> IDoc scenario, The Points to noted are:
    1. You don’t need a DT, MT or a message interface for the IDOC as it itself acts as the Message Interface.
    2. You import the IDOC and use the same in your mapping.
    3. In this configuration note that you will need a sender agreement for the file.
    4. In this configuration note that you will also need a receiver agreement for the IDOC.
    For any File -> XI -> IDoc scenario ref:
    /people/anish.abraham2/blog/2005/12/22/file-to-multiple-idocs-xslt-mapping
    Hope this helps you.
    Regards.
    Praveen

  • File to IDoc scenario( Bypass)-- Error ( Segment is missing) -- urgent pls.

    Hi All,
    I am doing File to IDoc scenario( Bypass) for Orders05.
    File is picking succesfully and not posting the idoc in the SAP..
    My source file(idoc-xml) consists of all the required data to post the idoc including the segment 'E1EDK01'.
    but the error it is showing is <b>" Obligatory node 'E1EDK01' missing in the structure ORDERS05 "</b>
    Please suggest me ASAP what is going wrong .
    Thanks in Advance.
    Regards
    Seema.

    The source File is not the idoc XML. It is invalid. You might need to ask the source to change the XML or use a Mapping to do this.
    This is how it should look, ( check the parts in bold),
    <?xml version="1.0"?>
    <ORDERS05>
    <IDOC <b>BEGIN ="1"</b>>
    <EDI_DC40 SEGMENT="EDI_DC40">
    <DOCNUM>1</DOCNUM>
    <DIRECT>2</DIRECT>
    <IDOCTYP>ORDERS05</IDOCTYP>
    <CIMTYP></CIMTYP>
    <MESTYP>ORDERS</MESTYP>
    <SNDPOR>XXXXXXXXX</SNDPOR>
    <SNDPRT>LS</SNDPRT>
    <SNDPFC></SNDPFC>
    <SNDPRN>XXXXXXXX</SNDPRN>
    <RCVPOR>XXXXXX</RCVPOR>
    <RCVPRT>LS</RCVPRT>
    <RCVPFC></RCVPFC>
    <RCVPRN>XXXXXXXX</RCVPRN>
    <CREDAT>20070511</CREDAT>
    <CRETIM>152803</CRETIM>
    </EDI_DC40>
    <E1EDK01 <b>SEGMENT = "1"</b>><BELNR>AAAAAAAAA123</BELNR>
    </E1EDK01<b>SEGMENT = "1"</b>>
    <E1EDKA1 ><PARVW>EK</PARVW> <ILNNR>231654845121</ILNNR>
    </E1EDKA1>
    <E1EDKA1 <b>SEGMENT = "1"</b>><PARVW>LF</PARVW>
    <NAME1>international</NAME1>
    <NAME2>Delhi</NAME2>
    <ILNNR>2121211545</ILNNR>
    </E1EDKA1><E1EDK02 <b>SEGMENT = "1"</b>><QUALF>001</QUALF>
    <BELNR>AAAAAAAAA123</BELNR>
    </E1EDK02><E1EDK02 <b>SEGMENT = "1"</b>><QUALF>002</QUALF>
    <BELNR>AAAAAAAAA123</BELNR>
    </E1EDK02><E1EDP01><POSEX>45</POSEX>
    <E1EDP19 <b>SEGMENT = "1"</b>><QUALF>001</QUALF>
    <IDTNR>00000000002150059</IDTNR>
    <KTEXT>Reddy</KTEXT>
    </E1EDP19><E1EDP19>
    <QUALF>003</QUALF>
    <IDTNR>5484218521214</IDTNR>
    </E1EDP19></E1EDP01>
    </IDOC></ORDERS05>
    Regards
    Bhavesh
    PS : You need to add SEGMENT = "1" for every segment. Please do add it if I have missed in the XML above.

  • Error while posting Inbound Idocs-"EDI: Partner profile not available"

    Hi,
    I am getting the error "EDI: Partner profile not available" Status -56 while creating inboud Idocs.
    I have done the following steps so far
    1.Created IDOC basic Type and Message Type. (Custom)
    2. Created process code to process the IDOC.
    3. Use the FM IDOC_INBOUND_WRITE_TO_DB to create the inbound IDOC.
    4. Use the FM IDOC_START_INBOUND to process the IDOC.
        Is ther anything else that i have to do inorder to post the idoc sucessfully.
    Thanks in advance
    -Nishant
    Edited by: nishant patel on Nov 13, 2009 10:35 AM
    Edited by: nishant patel on Nov 13, 2009 10:41 AM

    Hi,
    Check in WE20 if the partner profile is configured for the idoc type and the message type. That might be the cause of the error.
    Also make sure the same partner profile details are sent to the control record. Partner profile details are stored in the table EDP13.
    Hope this helps
    Regards
    Shiva

Maybe you are looking for