File to IDOC - issue with partner profile

I have done File to IDOC scenario and tested it end to end successfully. For same have done all require configuration setting in R/3 like defining logical System and partner profile. And it sends new IDOC successfully in R/3 with status code 50 (IDoc added).
But when I create new logical system and partner profile in R/3 and when I use same logical system in my above mention scenario then my new generate IDOC in R/3 return status code 56 (EDI: Partner profile inbound not available). But same scenario work fine with my earlier partner profile. Here I have done all require changes at adapter level like adapter specific identification and same new logical system I have update in SLD with my business system Logical System Name.

Hi Bhavesh,
Thanks for your reply.
In control record, I checked with sender and receiver partner. In this sender partner is new partner profile which I have created with port details. Receiver partner has logical system name which I have mentioned in my SLD for my receiver business system. But in receiver partner don’t have any port details.
But still it has same problem.
-Sunil

Similar Messages

  • FILE TO IDOC  SCENARIO WITH SCREEN SHOTS

    can u please send me  FILE TO IDOC  SCENARIO WITH SCREEN SHOTS and do the needful for me

    /people/ravikumar.allampallam/blog/2005/03/03/creating-purchase-order-idoc-through-xi
    /people/michal.krawczyk2/blog/2005/03/29/xi-error--unable-to-convert-the-sender-service-to-an-ale-logical-system
    /people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters
    /people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions
    Also have a look at these forum threads...
    IDOC TO FILE SCENARIO
    idoc to file scenario
    I hope this answers your query.
    regards
    Sreeram.G.Reddy
    Message was edited by:
            Sreeram Reddy

  • Captivate 8 - How to change to producing "project.json" file instead of a "project.txt" file?  Having issues with viewing published projects due to this.

    Captivate 8 - How to change to producing "project.json" file instead of a "project.txt" file?  Having issues with viewing published projects due to this.   Would be thankful fo rany/all advice.

    I'm having the same issue. I've been able to work around it by opening the txt file and copying the contents. Then I open a new file in Sublime Text 2, paste the contents and save the new file as "project.json". It seems to work, but it'd been nice if I didn't have to do this everytime I publish a new project.

  • Inbound idoc testing via partner profile

    i want to test inbound idoc testing via partner profile.
    the problem is i its generating idoc no and giving a message like
    "idoc no 12453152.. is saved but cannot or shd not be processed".
    what does that mean ..
    how shd i veiw properties of partner p[rofiles

    i am getting thid message from we 19 ..
    in that i am creating a sales order...
    i am clicking on startinboung button on application tools bar.
    this is an information pop up window ..
    if i press f1 on that ..
    help says that ...may be you  cannot process the idoc immediatly...
    check for partner profiles

  • Issue in Partner Profile config for Outbound IDOC

    Hi Experts,
    I have requirement like, When ever there will be any change in a Sales Order an Outbound IDOC will get triggered though a output type. This IDOC will save a file in the Application Server.
    The Message Type i am using is ORDERS and the Basic Type is ORDERS05.
    I have created a Partner Profile also a Receiver Port of type FILE.
    I have Assigned Message type in Outbound Parameters.
    I have assigned Receiver Port and Basic type under "Outbound Option".
    I have Assigned Applications as 'V', Message type as 'Output Type' and Process Code under "Message Control".
    When i am changing any Sales Order no IDOC is getting Triggered. I checked the Sales Order>Extras> Output> Header> Edit, the Output type is in Status RED with Message " No Partner Profiles (Message Control) Maintained".
    Please guide me if i have missed any configs.
    Help me solving this issue.
    Thanks in Advance!
    Priyabrata

    Hi Priyabrata,
    please try changing in your partner profile the application from V to V1. Another problem that's often causing the partner profile not to be found are the partner functions that are added automatically by SAP, but sometimes forgotten in the partner profile.
    I don't have a SAP system at the moment, but as far as I remember the long text of the message indicates the partner profile parameters that SAP uses for the lookup.
    If all of this doesn't help, I'd quickly debug this and see why SAP's not picking up the correct partner profile.
    Cheers, harald

  • Settings for IDoc Processing Maintain Partner Profile Manually

    Hi Everybody,
    I just wanted to maintain a partner profile for IDoc Outbound Processing in CRM7.0. The Partner Type is LS (Logical System).
    Now, when I'm creating an Outbound Parameter and want to save, I get an Error Message that the field package size must be > 0.
    The problem is, that there is no field Package Size. In older systems there is such a field under the field receiver port.
    Anyone any idea where is the missing field or another solution.
    Thanks and regards,
    Sebastian
    PROBLEM SOLVED !!
    When you get the error message, press enter several times and the field appears. Incredible.... but true.
    Edited by: Sebastian Wilhelm on Sep 3, 2009 4:06 PM

    Hi,
    Steps to do ALE Configuration with respect to IDOC:
    Configuration in R/3:
    1. Create a RFC destination using Transaction = SM59
    2. Create the ports using we21 and refer the port to the created RFC dest in above Step.
    3. Create a Logical System using Transaction BD54.
    4. Create a partner profile using transaction WE20.
    Also need to configure in XI:
    1. Create a RFC destination using Transaction = SM59
    2. Create the ports using Transaction IDX1 and refer the port to the created RFC dest in above Step.
    3. The port has to be displayed in the IDX2 transaction and we should be able to view the idoc’s which we imported through integration repository otherwise we have to manually import the idoc’s from IDX2 using the port created above
    Also refer to the link below for further details:
    /people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters
    Regards,
    Nithiyanandam

  • Issue with Agent Profile from AM 70 OpenSSO interesting issue

    Hi All,
    I have a specific scenario and if it is not possible then ugrade from AM 7.0 to OpenSSO cant be true.
    I have issue with the agent profiles (BTW I am not doing upgrade from AM 7.0 to OpenSSO but its a fresh OpenSSO install)
    In AM 7.0 Agent profile is like this (below is the exact export from the AM 7.0)
    dn: uid=Test-Agent,ou=agents,o=am
    sunIdentityServerDeviceStatus: Active
    uid: Test-Agent
    objectClass: sunIdentityServerDevice
    objectClass: iplanet-am-user-service
    objectClass: top
    objectClass: iPlanetPreferences
    sunIdentityServerDeviceType: Agent
    cn: default
    sunIdentityServerDeviceVersion: 2.2
    userPassword: {SSHA}1w9aOfz1D4bypX292YT2oObVee34BWkgSB3IXQ==
    Below is exact import into the OpenSSO (I created this LDIF using my script)
    dn: ou=Test-Agent,ou=default,ou=OrganizationConfig,ou=1.0,ou=AgentService,ou=services,o=am
    ou: Test-Agent
    sunsmspriority: 0
    sunserviceID: 2.2_Agent
    sunKeyValue: sunIdentityServerDeviceStatus=Active
    sunKeyValue: sunIdentityServerDeviceKeyValue=
    sunKeyValue: description=
    objectClass: sunServiceComponent
    objectClass: top
    sunKeyValue: userpassword={SSHA}1w9aOfz1D4bypX292YT2oObVee34BWkgSB3IXQ==
    Now you can see the issue in AM 7.0 the password is stored as "userPassword: {SSHA}1w9aOfz1D4bypX292YT2oObVee34BWkgSB3IXQ==" where by directory server userpassword is SSHA encrypted VS in opensso it is "sunKeyValue: userpassword={SSHA}1w9aOfz1D4bypX292YT2oObVee34BWkgSB3IXQ==" which OpenSSO doesnt like .. :)
    If i create a Agent from the opensso Console then Agent create a password using AES encryption and and that works fine even when I import my above LDIF and update the password using the OpenSSO console it also works. The issues I have this I dont know all of the Agent clear text password and I only have the LDIF to work with. Any thought !! Please let me know I am stating to believe that the upgrade from AM 7.0 to OepnSSO will have the same issue which i have not tried yet.
    Anythoughts or ideas are very welcome !
    -Haris

    Configuring the agent like this, ie importing a ldif file is not supported and can lead to unexpected results as you have observed. Just do it in a supported way and change the password for the agent if you don't know it. As the administrator you are supposed to know the password or have the power to reset it.

  • Idoc: BS and Partner profile

    Hi Experts
    Does the partner profile created in R3 and the business system created in SLD needs to be the same for any idoc scenario. If yes why do we need to do so? and is it applicable for all types in partner profile?
    thkx

    They do not need to be the same, but it may help with a complex landscape if they are.
    The systems are linked via hostname to SLD
    A standard naming convention is recomended across the landscape and applied through all connections.

  • ALE issue:No partner profiles (message control) maintained

    Hi,gurus:
    My ALE scenario is tranferring PO from client 800 to 900 client.
    Now the logical system,partner profile，port，rfc，distribution model are created both the sender and receiver side.
    In ME21N->MESSAGE, the output type is NEU,and medium is A,partner function is LS,partner is ECCCLNT900.
    When I saved the PO,the status is red,and no idoc was generated.
    I viewed the processing log,the information is: No partner profiles (message control) maintained.
    But my distribution model is   sender:ECCCLNT800;receiver:ECCCLNT900;MESSAGE：ORDERS;
    The partner profile is ECCCLNT900(LS),and the outbound parameters are ORDERS,SYNCH.  For ORDERS,the message control is EF,NEU,ME10.
    Have you ever met this issue?
    Thanks in advance.

    Hi Li,
    Please refer this threads...
    Re: Message is not proposing automatically
    Re: IDoc was saved but cannot or should not be sent
    Hope you have to post this thread in ABAP General category..
    Regards,
    kumar.

  • Issue with Display Profiles

    Hi eb,
    I have a problem with Display profiles. When 2 users are log in, my display profil switch to "Generic RGB" and I cannot change it to any other profil.
    When I restart and log in one user - everything is ok. When I log in second user display profile set to Generic RGB and issue start. When I log out one of them situation is same and issue persist.
    I tryed run Color Sync Utility > Profile First Aid , but no problems found.
    Had anybody same issue?
    THX for ur help.

    Found a temporary solution! Here's the article: http://www.macworld.com/weblogs/macosxhints/2006/02/fuscolor/index.php
    Thanks to Niel from the thread at http://discussions.apple.com/thread.jspa?messageID=4776564&#4776564
    Hopefully the long-term fix is on it's way...
    Good luck!

  • File to idoc scenario with controls

    I am working on file to idic scenario.
    file has four types of lines :
    Begin of file.
    header.
    items.
    end of file.
    each line has a element Record type and some other elements.for header record type is A , for item its B , for Begin of file its C and for end of file its D.
    we have to check for every line that it should have record type as one of these four and if not so we have to send a mail through alert functionality.we have to send a mail which has all errors by checking the whole file for record types.we have to ignore these lines in the file and proceed with the rest.
    how can we implement this?
    regards,
    rohit

    Hi,
    Please go through these links
    /people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters
    /people/venugopalarao.immadisetty/blog/2007/01/24/troubleshooting-file-to-idoc-scenario-in-xi
    /people/ravikumar.allampallam/blog/2005/06/24/convert-any-flat-file-to-any-idoc-java-mapping
    /people/pooja.pandey/blog/2005/07/27/idocs-multiple-types-collection-in-bpm
    /people/sravya.talanki2/blog/2005/08/17/outbound-idocs--work-around-using-party
    /people/venugopalarao.immadisetty/blog/2007/01/24/troubleshooting-file-to-idoc-scenario-in-xi
    Thanks
    Vikranth Khimavath

  • PO outbound IDOC - Issue with Unit of measure

    Hi,
    I am facing issue with unit of measure.
    1) In the PO outbound idoc in segment E1EDP01, the unit is always converted into ISO code and sent. Is there any way to avoid it.
    2) Now while changing unit to ISO code, it checks if it is preset in T006 table. Now in some of the cases like Unit FT3, there are no entries in T006 table, hence IDOC is going into error. Let me know how can this be resolved. Do I need to update T006 table if yes then how can I do it.
    Thanks.
    Regards,
    Shahu

    Sorry.. Posting it in ABAP Development forum.

  • Using SYPART01 IDOC for setting partner profiles from external system

    We wish to maintain our partner profiles from an external system.
    Is there any existing interface for doing this.
    It seems that the sypart message is only for output, not input.
    Any ideas or suggestions?
    Thanks!
    Dan

    Hello Dan,
    Thanks for your post.
    I hope the following code helps in future.
    http://wiki.sdn.sap.com/wiki/display/Snippets/Copy+partner+profiles+with+SYPART+message+quickly.

  • Value of package size issue with partner

    Hi
    Iam trying to configure idoc type in the partner, but when i try to save it,  is giving the following error
    "Please enter a value for package size".

    Hi Kalyan,
    Check we20 (partner profiles) and the mode (in outbound) it it is collect you need top specify a size for package
    Check this thread too
    Re: ale/idoc setting
    Regards
    Suraj
    Edited by: S.R.Suraj on Oct 12, 2009 12:09 PM

  • Issue with color profile image processing

    Their seems to an issue with the iPhone displaying an image which has a Color profile of: Generic HDR Profile. The image appears very dark and nearly unviewable. This has been frustrating to trouble shoot becasue the image will display correctly on the computer, but when it is viewed on the iPhone it looks completely different. When images have other color profiles such as sRGB the images will look the same on both platforms. When an image has a Generic HDR color profile it will not display correctly on the iPhone. 
    Anyone else come across this problem?

    When PSE gets weird, the first thing to do is to reset the preferences. Go to the editor preferences>general, click this button and restart the editor:

Maybe you are looking for

  • Only 1 spot color of Linked 2-channel Photoshop image appears in acrobat 9.0

    I just installed CS 4 design premium. I have a 2-color business package that was created in Illustrator CS2 with 2-color Photoshop links (spot color multichannel files saved as Photoshop DCS 2.0/eps). When working before in CS 2 my spot color links v

  • Create Oracle Text Index from Java via JDBC

    Hi, I have a question relevant to creation of the Text Index in Oracle Text via Java JDBC. In Java I create client application and I connect to remote Oracle server. (there is Oracle 10g Enterprise Edition 10.2.0.3.0 on Debian Linux OS). In Java I cr

  • WLC integration with LDAP to authenticate domain users without Radius

    Dear All,      I have a WLC 4404 with LWAPs, the customer has a microsoft LDAP and all users are joined to the domain and he wants the users to be authenticated against their domain accounts and this should be done automatically so that when users lo

  • Component quantity showing ZERO

    Hi Gurus, I am getting an issue during create of production orders.The issue is like this I took a finish material code   F00010   and created two production orders with different order type Also I maintained the alternative group in BOM for some lin

  • Sqlloader to load AQ table

    Hi, Can I use SQLLOADER to load data in an AQ table. If yes, can you please provide some help in this regard. Regards, Koushik