File to Proxy Scenari0, Error in ECC server Messages stucked in Queue

Hi All
we have created a file to proxy scenario in PI & when we are sending the data to Proxy, proxy is not getting executed in SAP ECC & we are getting the following error in out production ECC server & all the messages are getting s
No load could be found for transformation /1SAI/TXSA9475ABE3925030F71D9
could any one of you please help me in resolving this issue.
Thanks
Rinku Gangwani

Hi,
Are you activate the ICF services in ERP system? This issue must be done for the correct execution of proxy channel.
What type of program mapping are you using for the content transformation?
If you use a ABAP mapping program make sure to activate the program correctly.
Best regards
Ivá

Similar Messages

Message stuck in queue - Rejected by server

Okay, so I thought was being smart by trying to set up my companies email on my own. When I entered all of the information (which I made mistakes) I tried to send a test message. Of course it would not go through and was being rejected by my companies server. So I deleted the email account I created on iphone. However, the test email I sent remained in queue and kept trying to resend over and over getting the same error/rejection message from companies email. Since there is no sent box (on .MAC anyway)there was no way to erase the test message stuck in queue.
Solution: Since I currently have two email accounts .MAC and Yahoo, I just tured off the .MAC and all of a sudden I hear the SHOOOWWWSHHHH. The test message stuck in queue was sent from the yahoo account. (after I confirmed the message was sent, I turned on hte .MAC email account again)
Now I know this solution is purely dumb luck and playing around with settings, but just incase it happens to you, this was how I solved it.

Hey, thanks for that! It is very intersting to see how that works. Looks like the outgoing mail queue can change "on demand", like when you left only one account active. This means that the ability to send emails from any of the accounts regardless of where it came in is just a programming step away...

File to Proxy Scenario : Error in communication channel monitoring

Hi,
I have developed File to Proxy Scenario on PI 7.1 system and it is not working. I see the below error in communication channel monitoring.
u201CError: com.sap.engine.interfaces.messaging.api.exception.ConfigException: Some of the IS access information is not available. SLDAccess property may be set to true, but SLD is not available.u201D
File will be picked from the FTP server.
I have created File system in SLD of type "Third Party", Can this be the issue?
Please guide me on this.
Thanks,
Chandravadan

Hi!
Check if the tcode SLDCHECK is ok!
Check note #764176.
Also, refer to link below and execute each steps from the links there MANUALLY.
Wizard-Based Configuration:
http://help.sap.com/saphelp_nwpi71/helpdata/EN/45/2e4c1b16bb4aa8e10000000a11466f/frameset.htm
Regards,
Caio Cagnani

File to Proxy Scenario Error

Hi Experts,
I am working on File To Proxy Scenario. I am getting the below Error: The Messages in SXMB_MONI are going to AUtomatically Restart Status. I see some Queues with RETRY Status in SMQ2. When i am testing from SPROXY, the Table is Updated with the Corresponding Values. But when i place the file in the ftp folder then i am getting this error.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">CLIENT_SEND_FAILED</SAP:Code>
<SAP:P1>500</SAP:P1>
<SAP:P2>Internal Server Error</SAP:P2>
<SAP:P3>(See attachment HTMLError for details)</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>Error while sending by HTTP (error code: 500, error text: Internal Server Error) (See attachment HTMLError for details)</SAP:Stack>
<SAP:Retry>A</SAP:Retry>
</SAP:Error>
Please check and do the needful .
Regards,
GIRIDHAR

Hi Giridhar,
The problem is with connection. Please check the below discussion
HTTP returns status is 500(Internal Server Error)
Problem in ABAP proxy........ | SCN
regards,
Harish

Error while sending the messages to JMS Queue

Hi ,
I am trying to pick the file from JMS Queue and send the response xml as outbound message to JMS Queue again using XAI Sender
I Created XAI Sender, Outbound Message Type(DM-RCVRESP) and configured these two with External System.
I am able to pick the file from JMS Queue but unable to send the message through XAI Sender (Real-time)
Plz find below the error trace getting.
[Wed Jun 15 16:12:09 IST 2011] Error while processing sender "UPLOADSTG" : Unable to update response in staging table: Row id not given.
com.splwg.mpl.sending.SameThreadSendingManager$ProcessException
     at com.splwg.mpl.sending.SameThreadSendingManager.processDestination(SameThreadSendingManager.java:341)
     at com.splwg.mpl.sending.SameThreadSendingManager.sendResponse(SameThreadSendingManager.java:293)
     at com.splwg.mpl.sending.SameThreadSendingManager.doSend(SameThreadSendingManager.java:249)
     at com.splwg.mpl.server.async.ExecSendRequestProcessor.ProcessRequest(ExecSendRequestProcessor.java:61)
     at com.splwg.mpl.server.async.RequestProcessingThreadAdapter.run(RequestProcessingThreadAdapter.java:46)
     at com.splwg.mpl.server.PooledThread.run(PooledThread.java:91)
     at java.lang.Thread.run(Thread.java:662)
Please guide me in this regard..
Thanks,
sukumar

What have you configured for the response tab for the sender? Are you using the MPL or the MDB?
Take a look at:
MPL Best Practices (Doc Id 1308165.1)
Oracle WebLogic JMS Integration (Doc Id: 1308181.1)

Error while enqueue-ing messages in Jms Queue

While testing the ProcessSalesOrderFulfillmentOSMCFSCommsJMSProducer_1.0 process , in the Order to Bill PIP, we are encountering the following error ,
09/10/08 15:05:07 Error initializing the Oracle JMS Resource provider for Queues: Io exception: Got minus one from a read call
<2009-10-08 15:05:07,060> <WARN> <default.collaxa.cube.ws> <JMSAdapter::Outbound> JMSMessageConsumer_init: Retrying connection; attempt #231
09/10/08 15:05:29 Stop process
09/10/08 15:05:31 Shutting down...
09/10/08 15:05:37 Error initializing the Oracle JMS Resource provider for Queues: Io exception: Got minus one from a read call
<2009-10-08 15:05:37,875> <WARN> <default.collaxa.cube.ws> <JMSAdapter::Outbound> JMSMessageConsumer_init: Retrying connection; attempt #232
<2009-10-08 15:05:43,484> <INFO> <collaxa> <ServerManager::uninit> Shutting down all domains
<2009-10-08 15:05:43,487> <INFO> <default.collaxa.cube.engine> <AdapterStats::uninit:Done uninitializing Adapter statistics holder for engine > default
<2009-10-08 15:05:43,494> <INFO> <default.collaxa.cube.activation> <AdapterFramework::Inbound> JCAActivationAgent::uninit Shutting down the JCA activation agent, processId='bpel://localhost/default/AIAReadJMSNotificationProcess~1.0/', activation properties={portType=Consume_Message_ptt}
<2009-10-08 15:05:43,494> <INFO> <default.collaxa.cube.activation> <AdapterFramework::Inbound> Adapter Framework instance: OraBPEL - performing endpointDeactivation for portType=Consume_Message_ptt, operation=Consume_Message
<2009-10-08 15:05:43,494> <INFO> <default.collaxa.cube.ws> <JMSAdapter::Outbound> JmsResourceAdapter_endpointDeactivation: Deactivating endpoint Endpoint_10
<2009-10-08 15:05:44,547> <INFO> <default.collaxa.cube.activation> <AdapterFramework::Inbound> Stopping inbound part of Adapter Framework instance: OraBPEL
<2009-10-08 15:05:45,549> <INFO> <default.collaxa.cube.ws> <JMSAdapter::Outbound> JmsResourceAdapter_stop: Jms Adapter stopped
<2009-10-08 15:05:45,550> <INFO> <default.collaxa.cube.activation> <AdapterFramework::Inbound> JCAActivationAgent::uninit Shutting down the JCA activation agent, processId='bpel://localhost/default/AIADiagnosticsDequeueMessageVerification~1.0/', activation properties={portType=Consume_Message_ptt}
<2009-10-08 15:05:45,550> <INFO> <default.collaxa.cube.activation> <AdapterFramework::Inbound> Adapter Framework instance: OraBPEL - performing endpointDeactivation for portType=Consume_Message_ptt, operation=Consume_Message
<2009-10-08 15:05:45,550> <WARN> <default.collaxa.cube.ws> <JMSAdapter::Outbound> JmsResourceAdapter_endpointDeactivation: Cannot deactivate. Endpoint oracle.tip.adapter.jms.inbound.JmsConsumeActivationSpec@c50033 has not been activated before.
<2009-10-08 15:05:45,550> <INFO> <default.collaxa.cube.activation> <AdapterFramework::Inbound> Stopping inbound part of Adapter Framework instance: OraBPEL
<2009-10-08 15:05:45,570> <INFO> <default.collaxa.cube.engine> <AdaptorManager::unload> Uninitialized adaptors for platform 'ias_10g', datasource 'oracle'
<2009-10-08 15:05:45,570> <INFO> <default.collaxa.cube.engine> <CubeEngine::uninit> Uninitialized BPEL domain "default"
<2009-10-08 15:05:45,577> <INFO> <default.collaxa.cube.engine> <CubeEngine::unload> Unloaded BPEL domain "default"
<2009-10-08 15:05:45,577> <INFO> <collaxa> <ServerManager::uninit> Done shutting down all domains
09/10/08 15:06:07 Error initializing the Oracle JMS Resource provider for Queues: Io exception: Got minus one from a read call
and after restarting OC4J we are able to enqueue messages into the database queue.If anyone has encountered similar problem could you please provide your suggestion to fix this issue .Thanks.
Regards,
Keynes.

What have you configured for the response tab for the sender? Are you using the MPL or the MDB?
Take a look at:
MPL Best Practices (Doc Id 1308165.1)
Oracle WebLogic JMS Integration (Doc Id: 1308181.1)

BPM: Message Stucked in Queue on Error even after Cancel Process

Hi all,
We have a scenario where we are using BPM to call RFCs in sequence using BPM. In case of exception, we make use of exception branch and canel the process. But even after doing so, failed messages are stucked in queue and if a new message comes in, it goes in pending status due to previous stucked messages.
Can anybody please suggest how to overcome this.
Thanks
-Kulwant

You need to make sure that:
1) You have defined a Exception Handler in your Block
2) You have included this in the Exception Branch properties.
3) You have included this under the Exceptions section of your Sync Send Step....
Even I got into the same situation and then figured out that F7 mentioned Exception will never be raised....why??.....the 3rd point was the reason.....check if same applicable to your case also...
Regards,
Abhishek.

File to Proxy scenario message failed in ECC with staus SYSFAIL

Hi All,
We are working on File to proxy scenario, PI able to send message successfully to ECC, but In ECC , message got stuck in queues with the status 'SYSFAIL',
when I read the error message it is showing Address Invalid.
when I run the LUW, it is giving 'Function module does not exist or EXCEPTION 'raised message.
I'm using PI 7.1 EHP1 , ECC 6.0, can anyone suggest the trouble shooting guidelines for this issue?
Thanks,
Venu.

when I run the LUW, it is giving 'Function module does not exist or EXCEPTION 'raised message.
in your code, there seems to be an invalid statement.
check the proxy code.

Error on WWI server EHS_GLM_GENSERV: Results file not found on production

Hi Experts,
I need some help/advice. We have issues with our new EH&S WWI server.
This new setup working OK with Dev and QA (the WWI and GLM part is just fine), We did try to link this server to production then it gives below error.
Only difference between existing WWI QA and production server is that
Existing QA and development WWI server installed at location C:\Program Files (x86)\EHS\WWI
And Same path maintain on new server C:\Program Files (x86)\EHS\WWI
But existing production WWI server installation path is different C:\Program Files\EHS\WWI
So is there any customizing changes required from SAP side to avoid this error on production
Can you please advise on this.
================================================================================
Error on WWI server EHS_GLM_GENSERV: Results file not found
Message no. C$830
Diagnosis
The results file of the generation was not found on the WWI server EHS_GLM_GENSERV.
System Response
Generation was not carried out.
Procedure
Advise your system administrator to check the WWI installation on the WWI server EHS_GLM_GENSERV.
Check the Windows event log on the WWI generation server. The event log may contain other error messages.
SAP Note 1058521 provides possible solutions for this error.
==================================================================================
Log shows
============================================================================================================================================
E000 Error: OLE Exception (-2146823114) from Word8_OpenDoc (docs.Open) by Microsoft Word: This file could not be found. (C:\Windows\...\r00000000000001422051.rtf) (HRESULT Code:5174)
E000 Error opening document (Word8_OpenDoc: Documents.Open failed)
================================================================================================================================================

Hello Gajanan,
the path of the temporay workfolder can be configured in the IMG. Often this path is setup as the WWI server installed location but it is just a temporay workfolder which must exist on the WWI server. The path can be configured under:
For ECC 6.0 Ehp 0-2 and lower
Environment, Health and Safety -> Basic Data and Tools -> Basic Settings -> Specify Environment Parameters
For ECC 6.0 Ehp 3-6
Environment, Health and Safety -> Product Safety -> Global Label Management -> Make Settings for Basic Data
For ECC 6.0 Ehp 7
Environment, Health and Safety -> Global Label Management -> Set Basic Data and Tools for Global Label Management -> Make Settings for Basic Data

File Content Conversion Error in PI 7.1 (file to Proxy)

Hi
I am working on File to Proxy Scenario and I gave the File content conversion as below, File is picking up by the PI Server when I look at Communication Channel Monitoring, However when I open the Message ID in the CC monitoring it says as
404 Not Found
The requested resource does not exist.
and I do not see any message SXMB_MONI(Because the content is not converted), Can anyone give an idea how to debug this
Thanks
PR
Please find the details below which I gave in the content Conversion
Document Name : MT_TW_AK
Document NameSpace : http://aiwcd.com/Claims_Management(CM)_Rel2.0
RecordSet Name : FROISROIAcknowledgement
RecordSet Structure : Header,1,Record,*,Trailer,1
Recordset Sequence : Ascending
KeyField Name :TransactionSetID
Key Field Type : String (Case Sensitive)
IgnoreRecordsetName : true
Header.fieldNames :TransactionSetID,SenderID,ReceiverID,DateTransmissionsent,TimeTransmissionsent,OriginalTransmissionDate,OriginalTransmissionTime,TestProductionCode,InterchangeVersionID
Header.fieldFixedLengths: 3,25,25,8,6,8,6,1,5
Header.keyFieldValue : H
Record.fieldSeparator :
Record.fieldNames : TransactionSetID,RecordSequenceNumber,DateProcessed,TimeProcessed,InsurerFEIN,ClaimAdministratorPostalCode,ClaimAdministratorFein,AcknowledgementTransactionSetID,ApplicationAcknowledgmentCode,InsuredReportNumber,ClaimAdministratorClaimNumber,JuridictionClaimNumber,MaintenanceTypeCode,MaintenanceTypeCodeDate,RequestCode,FreeFormText,NumberofErrors,MaintenanceTypeCorrectionCode,MaintenanceTypeCorrectionCodeDate,JurisdictionBranchOfficeCode,ClaimAdministratorAlternatePostalCode,NumOfErrors
Record.fieldFixedLengths: 3,9,8,6,9,9,9,3,2,25,25,25,2,8,3,60,2,2,8,2,9,19
Record.keyFieldValue : A
Trailer.fieldNames:TransactionSetID,DetailRecordCount,TransactionCount
Trailer.fieldFixedLengths: 3,9,9
Trailer.keyFieldValue : T
ignoreRecordsetName: true

PR,
Can you check the error in sender communication channel?
Go to RWB ---> Component Monitoring ---> Adapter Engine ---> Communication cahnnel monitoring --> it displays new page. Then give your file sender communication cahnnel name. There you will definitely see some error.
The error what you are getting is a different to this one. Can you please check the error what I have given above path.
Regards,
---Satish

ICM_HTTP_CONNECTION_FAILED error in file to proxy??

Hi
In my file to proxy,
i am maintaining one Http RFC destination..intest Connection i am getting 500 as status.
two TCP/IP destinations LCRSAPRFC and SAPSLDAPI.
i am maintaing values in SPROXSET table.
in SLDAPICUST also.
and in SXMB_ADM i configuerd Integration engine.
but i am getting error in sxmb_moni
SAP:P4></![CDATA[>
<SAP:AdditionalText><html><head><title>SAP Web Application Server Error</title> <style type="text/css"> body { font-family: arial, sans-serif;} </style> </head> <BODY text="#172972" link="#808080" vlink="#808080" alink="#8e236b" bgcolor=white leftmargin="0" topmargin="0" marginheight="0" marginwidth="0"> <table height="61" width="100%" border="0" cellspacing="0" cellpadding="0"><tr><td background="http://dcexi0605.aaaa.com:8030/sap/public/icman/img/bluebar_tile.gif" height="30"><table> <tr> <td width=5></td> <td width=20% nowrap><font face=arial size="-1" color=white>SAP Web Application Server </font></td><td width=75% align="right" nowrap><font face=arial size="-1" color="white"><a href="http://help.sap.com/">Help </font></td><td width=5% nowrap></font></td> </tr></table> </td><td rowspan=2 width=122 height=61 valign=top><img src= "http://dcexi0605.aaaa.com:8030/sap/public/icman/img/theme.jpg" width=122 height=61 border=0 alt="SAP"></td> </tr><tr><td background="http://dcexi0605.aaaa.com:8030/sap/public/icman/img/graybar_tile.jpg" height="31"> </td></tr> </table> <br><br> <table width=800> <tr><td width=50 nowrap> </td><td> <H2><b>404 Resource not found</b></H2><br><hr><br>Partner not reached<br><br><hr> <table border="0"> <tr><td>Error:</td><td>-20</td></tr> <tr><td>Version:</td><td>6040</td></tr> <tr><td>Component:</td><td>ICM</td></tr> <tr><td>Date/Time:</td><td>Wed Feb 28 12:28:10 2007 </td></tr> <tr><td>Module:</td><td>icxxconn_mt.c</td></tr> <tr><td>Line:</td><td>2121</td></tr> <tr><td>Server:</td><td>ciBGX30_BGX_30</td></tr> <tr><td>Detail:</td><td>Connection request from (42/31087/0) to host: dcesssss08.aaaa.biz, service: 8010 failed (NIECONN_REFUSED) AP-T42, U31087, 100 SOA_AAA, M2B-36-D-1787, 12:28:10, M0, W2, , 1/0</td></tr> </table> <p></p> </td></tr></table> <table><tr><td width=50 nowrap></td> <td nowrap><FONT SIZE=-1><a href="http://www.sap.com/">© 2001-2005, SAP AG</a></FONT></td></tr></table></SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace=""></SAP:ApplicationFaultMessage>
<SAP:Stack><b>Error when receiving by HTTP (error code: 400, error text: ICM_HTTP_CONNECTION_FAILED)</b></SAP:Stack>
<SAP:Retry>A</SAP:Retry>
</SAP:Error>
please guide me where i did mistake
regards
Ram

hi friends..
now i am getting HTTP_RESP_STATUS_CODE_NOT_OK HTTP response contains status code 403 with the description Forbidden Error when sending by HTTP (error code: 403, error text: Forbidden)
i maintaind in RZ10 the values.intially port is 8100 , now i changed it 8000
in sxmb_adm..
corresponding Integarion server:
http://hostname:8030/sap/xi/engine?type=entry
the same value is maintained in Sproxset table also
in SMICM -Services Http services port is 8000
please suggest me
regards
Ram

File to proxy ..HTTP_RESP_STATUS_CODE_NOT_OK error in sxmb_moni??

Hi friends..
in file to proxy.. i am getting error like this..
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?> <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand=""><SAP:Category>XIServer</SAP:Category><SAP:Code area="INTERNAL">HTTP_RESP_STATUS_CODE_NOT_OK</SAP:Code><SAP:P1>500 </SAP:P1><SAP:P2>Internal Server Error</SAP:P2><SAP:P3></SAP:P3><SAP:P4></SAP:P4><SAP:AdditionalText><html><head><title>SAP Web Application Server Error</title>
<style type="text/css">
body { font-family: arial, sans-serif;}
</style>
</head>
<BODY text="#172972" link="#808080" vlink="#808080"
alink="#8e236b" bgcolor=white leftmargin="0" topmargin="0"
marginheight="0" marginwidth="0">
<table height="61" width="100%" border="0" cellspacing="0"
cellpadding="0"><tr><td background="http://dceazar01:8010/sap/public/icman/img/bluebar_tile.gif"
height="30"><table> <tr> <td width=5></td> <td width=20% nowrap><font face=arial size="-1" color=white>SAP Web Application Server
</font></td><td width=75% align="right" nowrap><font face=arial
size="-1" color="white"><a href="http://help.sap.com/">Help
</font></td><td width=5% nowrap></font></td> </tr></table>
</td><td rowspan=2 width=122 height=61 valign=top><img src=
"http://dceazar01:8010/sap/public/icman/img/theme.jpg" width=122 height=61 border=0 alt="SAP"></td>
</tr><tr><td background="http://dceazar01:8010/sap/public/icman/img/graybar_tile.jpg" height="31">
</td></tr>
</table>
<br><br>
<table width=800>
<tr><td width=50 nowrap>
</td><td>
<H2><b>500 Internal Server Error</b></H2><br><hr><br>Internal Server Error(-1)<br><br><hr>
<table border="0">
<tr><td>Error:</td><td>-1</td></tr>
<tr><td>Version:</td><td>6040</td></tr>
<tr><td>Component:</td><td>HTTP_PLG</td></tr>
<tr><td>Date/Time:</td><td>Sun Jan 7 12:04:44 2007
</td></tr>
<tr><td>Module:</td><td>http_plg_mt.c</td></tr>
<tr><td>Line:</td><td>3505</td></tr>
<tr><td>Server:</td><td>dceazar01_SRD_10</td></tr>
<tr><td>Detail:</td><td>No handler defined for this URL</td></tr>
</table>
<p></p>
</td></tr></table>
<table><tr><td width=50 nowrap></td>
<td nowrap><FONT SIZE=-1><a href="http://www.sap.com/">© 2001-2005, SAP AG</a></FONT></td></tr></table></SAP:AdditionalText><SAP:ApplicationFaultMessage namespace=""></SAP:ApplicationFaultMessage><SAP:Stack><b>HTTP response contains status code 500 with the description Internal Server Error
Error when sending by HTTP (error code: 500, error text: Internal Server Error)</b></SAP:Stack><SAP:Retry>M</SAP:Retry></SAP:Error>
please guide me..
regards
Ram

hi friends..
trace is like this...
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?> <SAP:Trace xmlns:SAP="http://sap.com/xi/XI/Message/30"><Trace level="1" type="T">Party normalization: sender </Trace>
<Trace level="1" type="T">Sender scheme external = XIParty</Trace>
<Trace level="1" type="T">Sender agency external = http://sap.com/xi/XI</Trace>
<Trace level="1" type="T">Sender party external = </Trace>
<Trace level="1" type="T">Sender party normalized = </Trace>
<Trace level="1" type="T">Party normalization: receiver </Trace>
<Trace level="1" type="T">Receiver scheme external = </Trace>
<Trace level="1" type="T">Receiver agency external = </Trace>
<Trace level="1" type="T">Receiver party external = </Trace>
<Trace level="1" type="T">Receiver party normalized = </Trace>
<Trace level="1" type="B" name="CL_XMS_HTTP_HANDLER-HANDLE_REQUEST"></Trace>
<Trace level="1" type="T">XMB was called with URL /sap/xi/engine?type=entry</Trace>
<Trace level="2" type="T">Request Line = POST /sap/xi/engine?type=entry HTTP/1.1</Trace>
<Trace level="2" type="T">Host = dcexi0602.aaaa.com:8000</Trace>
<Trace level="2" type="T">Server protocol = HTTP/1.1</Trace>
<Trace level="2" type="T">Remote address = 10.150.113.48</Trace>
<Trace level="1" type="T">COMMIT is done by XMB ! </Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-ENTER_XMS"></Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-SET_START_PIPELINE"></Trace>
<Trace level="3" type="T">XMB was called with external pipeline PID = ENTRY</Trace>
<Trace level="3" type="T">Getting type of XMB... </Trace>
<Trace level="1" type="B" name="SXMBCONF-SXMB_GET_XMB_USE">
</Trace>
<Trace level="2" type="T">XMB kind = CENTRAL</Trace>
<Trace level="3" type="T">Start pipeline found </Trace>
<Trace level="2" type="T">Switch to external start pipeline PID = CENTRAL</Trace>
<Trace level="1" type="B" name="CL_XMS_TROUBLESHOOT-ENTER_PLSRV">
<Trace level="3" type="T">No triggers found. OK. </Trace>
</Trace>
<Trace level="1" type="T">**************************************************** </Trace>
<Trace level="1" type="T">*                                                  * </Trace>
<Trace level="1" type="T">*                                                  * </Trace>
<Trace level="1" type="T">XMB entry processing </Trace>
<Trace level="3" type="T">system-ID = DGX</Trace>
<Trace level="3" type="T">client = 100</Trace>
<Trace level="3" type="T">language = E</Trace>
<Trace level="3" type="T">user = XIAFUSERDGX</Trace>
<Trace level="1" type="Timestamp">2007-01-07T12:48:42Z CET </Trace>
<Trace level="1" type="T">*                                                  * </Trace>
<Trace level="1" type="T">*                                                  * </Trace>
<Trace level="1" type="T">**************************************************** </Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_UC_EXECUTE"></Trace>
<Trace level="1" type="T">Message-GUID = 6799BA809E4D11DBB72AF6C9E0007003</Trace>
<Trace level="1" type="T">PLNAME = CENTRAL</Trace>
<Trace level="1" type="T">QOS = EO</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_ASYNC"></Trace>
<Trace level="3" type="T">QOS = EO</Trace>
<Trace level="3" type="T">Message-GUID = 6799BA809E4D11DBB72AF6C9E0007003</Trace>
<Trace level="1" type="T">Get definition of external pipeline = CENTRAL</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID">
<Trace level="3" type="T">External PLID = CENTRAL</Trace>
<Trace level="3" type="T">Internal PLID = SAP_CENTRAL</Trace>
</Trace>
<Trace level="1" type="T">Get definition of internal pipeline = SAP_CENTRAL</Trace>
<Trace level="3" type="T">Generate prefixed queue name </Trace>
<Trace level="1" type="T">Queue name : XBTI0004</Trace>
<Trace level="1" type="T">Generated prefixed queue name = XBTI0004</Trace>
<Trace level="1" type="T">Schedule message in qRFC environment </Trace>
<Trace level="3" type="T">Setup qRFC Scheduler </Trace>
<Trace level="1" type="T">Setup qRFC Scheduler OK! </Trace>
<Trace level="3" type="T">Call qRFC .... MsgGuid = 6799BA809E4D11DBB72AF6C9E0007003</Trace>
<Trace level="3" type="T">Call qRFC .... Version = 000</Trace>
<Trace level="3" type="T">Call qRFC .... Pipeline = CENTRAL</Trace>
<Trace level="3" type="T">OK. </Trace>
<Trace level="1" type="T">----------------------------------------------------- </Trace>
<Trace level="1" type="T">Going to persist message </Trace>
<Trace level="1" type="T">NOTE: The following trace entries are always lacking </Trace>
<Trace level="1" type="T">- Exit WRITE_MESSAGE_TO_PERSIST </Trace>
<Trace level="1" type="T">- Exit CALL_PIPELINE_ASYNC </Trace>
<Trace level="1" type="T">Async barrier reached. Bye-bye ! </Trace>
<Trace level="1" type="T">----------------------------------------------------- </Trace>
<Trace level="3" type="T">Version number = 000</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST"></Trace>
<Trace level="3" type="T">Persisting message Status = 001</Trace>
<Trace level="3" type="T">Message version 000</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE">
<Trace level="3" type="T">Trace object available again now. OK. </Trace>
<Trace level="3" type="T">Message was read from persist layer. OK. </Trace>
<Trace level="3" type="T">Message properties in XMB object were setup. OK. </Trace>
<Trace level="3" type="ToDo">Make sure we catch exceptions in persist read </Trace>
<Trace level="3" type="ToDo">Tracing obj. not avail. before return of CL_XMS_MAIN-PERSIST_READ_MESSAGE</Trace>
</Trace>
<Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>
<Trace level="1" type="B" name="SXMS_ASYNC_EXEC"></Trace>
<Trace level="3" type="T">message version successfully read from persist version= 000</Trace>
<Trace level="2" type="T">Increment log sequence to 001</Trace>
<Trace level="1" type="T">----------------------------------------------------- </Trace>
<Trace level="1" type="T">Starting async processing with pipeline CENTRAL</Trace>
<Trace level="3" type="T">system-ID = DGX</Trace>
<Trace level="3" type="T">client = 100</Trace>
<Trace level="3" type="T">language = E</Trace>
<Trace level="3" type="T">user = XIAFUSERDGX</Trace>
<Trace level="1" type="Timestamp">2007-01-07T12:48:43Z CET </Trace>
<Trace level="1" type="T">----------------------------------------------------- </Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC"></Trace>
<Trace level="1" type="T">Get definition of external pipeline CENTRAL</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID">
<Trace level="3" type="T">External PLID = CENTRAL</Trace>
<Trace level="3" type="T">Internal PLID = SAP_CENTRAL</Trace>
</Trace>
<Trace level="1" type="T">Corresponding internal pipeline SAP_CENTRAL</Trace>
<Trace level="3" type="T"> </Trace>
<Trace level="3" type="T">Pipeline attributes </Trace>
<Trace level="3" type="T">PID        = SAP_CENTRAL</Trace>
<Trace level="3" type="T">ENABLE     = 1</Trace>
<Trace level="3" type="T">TRACELEVEL = 0</Trace>
<Trace level="3" type="T">EXEMODE    = A</Trace>
<Trace level="3" type="T"> </Trace>
<Trace level="3" type="T"> </Trace>
<Trace level="3" type="T">Pipeline elements </Trace>
<Trace level="3" type="T">ELEMPOS    = 0001</Trace>
<Trace level="3" type="T">PLSRVID    = PLSRV_RECEIVER_DETERMINATION</Trace>
<Trace level="3" type="T">PLSRVTYPE = </Trace>
<Trace level="3" type="T">FL_DUMMY   = 0</Trace>
<Trace level="3" type="T"> </Trace>
<Trace level="3" type="T">ELEMPOS    = 0002</Trace>
<Trace level="3" type="T">PLSRVID    = PLSRV_INTERFACE_DETERMINATION</Trace>
<Trace level="3" type="T">PLSRVTYPE = </Trace>
<Trace level="3" type="T">FL_DUMMY   = </Trace>
<Trace level="3" type="T"> </Trace>
<Trace level="3" type="T">ELEMPOS    = 0003</Trace>
<Trace level="3" type="T">PLSRVID    = PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
<Trace level="3" type="T">PLSRVTYPE = </Trace>
<Trace level="3" type="T">FL_DUMMY   = </Trace>
<Trace level="3" type="T"> </Trace>
<Trace level="3" type="T">ELEMPOS    = 0004</Trace>
<Trace level="3" type="T">PLSRVID    = PLSRV_MAPPING_REQUEST</Trace>
<Trace level="3" type="T">PLSRVTYPE = </Trace>
<Trace level="3" type="T">FL_DUMMY   = </Trace>
<Trace level="3" type="T"> </Trace>
<Trace level="3" type="T">ELEMPOS    = 0007</Trace>
<Trace level="3" type="T">PLSRVID    = PLSRV_OUTBOUND_BINDING</Trace>
<Trace level="3" type="T">PLSRVTYPE = </Trace>
<Trace level="3" type="T">FL_DUMMY   = </Trace>
<Trace level="3" type="T"> </Trace>
<Trace level="3" type="T">ELEMPOS    = 0008</Trace>
<Trace level="3" type="T">PLSRVID    = PLSRV_CALL_ADAPTER</Trace>
<Trace level="3" type="T">PLSRVTYPE = =SWITCH=</Trace>
<Trace level="3" type="T">FL_DUMMY   = </Trace>
<Trace level="3" type="T"> </Trace>
<Trace level="3" type="T">ELEMPOS    = 0009</Trace>
<Trace level="3" type="T">PLSRVID    = PLSRV_MAPPING_RESPONSE</Trace>
<Trace level="3" type="T">PLSRVTYPE = </Trace>
<Trace level="3" type="T">FL_DUMMY   = </Trace>
<Trace level="3" type="T"> </Trace>
<Trace level="3" type="T"> </Trace>
<Trace level="1" type="Timestamp">2007-01-07T12:48:43Z CET Begin of pipeline processing PLSRVID = CENTRAL</Trace>
<Trace level="1" type="B" name="PLSRV_RECEIVER_DETERMINATION">
<Trace level="1" type="Timestamp">2007-01-07T12:48:43Z CET Start of pipeline service processing PLSRVID= PLSRV_RECEIVER_DETERMINATION</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
<Trace level="3" type="T">Calling pipeline service: PLSRV_RECEIVER_DETERMINATION</Trace>
<Trace level="3" type="T">Reading Pipeline-Service specification... </Trace>
<Trace level="3" type="T"> </Trace>
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV) </Trace>
<Trace level="3" type="T">PLSRVID    = PLSRV_RECEIVER_DETERMINATION</Trace>
<Trace level="3" type="T">PLSRVTYPE = </Trace>
<Trace level="3" type="T">ADRESSMOD = LOCAL</Trace>
<Trace level="3" type="T">P_CLASS    = CL_RD_PLSRV</Trace>
<Trace level="3" type="T">P_IFNAME   = IF_XMS_PLSRV</Trace>
<Trace level="3" type="T">P_METHOD   = ENTER_PLSRV</Trace>
<Trace level="3" type="T">FL_LOG     = </Trace>
<Trace level="3" type="T">FL_DUMMY   = 0</Trace>
<Trace level="3" type="T"> </Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
<Trace level="1" type="B" name="CL_RD_PLSRV-ENTER_PLSRV">
<Trace level="1" type="T">R E C E I V E R - D E T E R M I N A T I O N </Trace>
<Trace level="1" type="T"> Cache Content is up to date </Trace>
<Trace level="2" type="T">Start without given receiver </Trace>
<Trace level="2" type="T">Classic Receiver Determination via Rules. </Trace>
<Trace level="2" type="T">Check conditions for rule line no. 1 </Trace>
<Trace level="2" type="T">...valid Receiver w/o Condition: - SAP_ERP_azar_DEV </Trace>
<Trace level="2" type="T">No Receiver found behaviour: 0 </Trace>
<Trace level="2" type="T">Number of Receivers:1 </Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="Timestamp">2007-01-07T12:48:43Z CET End of pipeline service processing PLSRVID= PLSRV_RECEIVER_DETERMINATION</Trace>
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST">
<Trace level="3" type="T">Persisting message after plsrv call </Trace>
<Trace level="3" type="T">Message-Version = 001</Trace>
<Trace level="3" type="T">Message version 001</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
</Trace>
<Trace level="1" type="B" name="PLSRV_INTERFACE_DETERMINATION">
<Trace level="1" type="Timestamp">2007-01-07T12:48:43Z CET Start of pipeline service processing PLSRVID= PLSRV_INTERFACE_DETERMINATION</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
<Trace level="3" type="T">Calling pipeline service: PLSRV_INTERFACE_DETERMINATION</Trace>
<Trace level="3" type="T">Reading Pipeline-Service specification... </Trace>
<Trace level="3" type="T"> </Trace>
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV) </Trace>
<Trace level="3" type="T">PLSRVID    = PLSRV_INTERFACE_DETERMINATION</Trace>
<Trace level="3" type="T">PLSRVTYPE = </Trace>
<Trace level="3" type="T">ADRESSMOD = LOCAL</Trace>
<Trace level="3" type="T">P_CLASS    = CL_ID_PLSRV</Trace>
<Trace level="3" type="T">P_IFNAME   = IF_XMS_PLSRV</Trace>
<Trace level="3" type="T">P_METHOD   = ENTER_PLSRV</Trace>
<Trace level="3" type="T">FL_LOG     = </Trace>
<Trace level="3" type="T">FL_DUMMY   = 0</Trace>
<Trace level="3" type="T"> </Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
<Trace level="1" type="B" name="CL_ID_PLSRV-ENTER_PLSRV">
<Trace level="1" type="T">I N T E R F A C E - D E T E R M I N A T I O N </Trace>
<Trace level="1" type="T"> Cache Content is up to date </Trace>
<Trace level="2" type="T">Check conditions for (Inb: Party Srvc If) SAP_ERP_azar_DEV InterfaceCollection </Trace>
<Trace level="2" type="T">...valid InbIf without Condition: InterfaceCollection </Trace>
<Trace level="2" type="T">Number of receiving Interfaces:1 </Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="Timestamp">2007-01-07T12:48:43Z CET End of pipeline service processing PLSRVID= PLSRV_INTERFACE_DETERMINATION</Trace>
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST">
<Trace level="3" type="T">Persisting message after plsrv call </Trace>
<Trace level="3" type="T">Message-Version = 002</Trace>
<Trace level="3" type="T">Message version 002</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
</Trace>
<Trace level="1" type="B" name="PLSRV_RECEIVER_MESSAGE_SPLIT"></Trace>
<Trace level="1" type="Timestamp">2007-01-07T12:48:43Z CET Start of pipeline service processing PLSRVID= PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
<Trace level="3" type="T">Calling pipeline service: PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
<Trace level="3" type="T">Reading Pipeline-Service specification... </Trace>
<Trace level="3" type="T"> </Trace>
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV) </Trace>
<Trace level="3" type="T">PLSRVID    = PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
<Trace level="3" type="T">PLSRVTYPE = </Trace>
<Trace level="3" type="T">ADRESSMOD = LOCAL</Trace>
<Trace level="3" type="T">P_CLASS    = CL_XMS_PLSRV_RECEIVER_SPLIT</Trace>
<Trace level="3" type="T">P_IFNAME   = IF_XMS_PLSRV</Trace>
<Trace level="3" type="T">P_METHOD   = ENTER_PLSRV</Trace>
<Trace level="3" type="T">FL_LOG     = </Trace>
<Trace level="3" type="T">FL_DUMMY   = 0</Trace>
<Trace level="3" type="T"> </Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
<Trace level="1" type="B" name="CL_XMS_PLSRV_RECEIVER_SPLIT-ENTER_PLSRV"></Trace>
<Trace level="3" type="T">Case handling for different plsrv_ids PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
<Trace level="2" type="T">got property produced by receiver determination </Trace>
<Trace level="1" type="T">number of receivers: 1 </Trace>
<Trace level="1" type="T">Single-receiver split case </Trace>
<Trace level="1" type="T">Post-split internal queue name = XBTOE1__0000</Trace>
<Trace level="1" type="T">------------------------------------------------ </Trace>
<Trace level="1" type="T">Persisting single message for post-split handling </Trace>
<Trace level="1" type="T"> </Trace>
<Trace level="1" type="T">Going to persist message + call qRFC now... </Trace>
<Trace level="1" type="T">NOTE: The following trace entries are always lacking </Trace>
<Trace level="1" type="T">- Exit WRITE_MESSAGE_TO_PERSIST </Trace>
<Trace level="1" type="T">Async barrier reached. Bye-bye ! </Trace>
<Trace level="1" type="T">------------------------------------------------ </Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST"></Trace>
<Trace level="3" type="T">Persisting message Status = 012</Trace>
<Trace level="3" type="T">Message version 003</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE">
<Trace level="3" type="T">Trace object available again now. OK. </Trace>
<Trace level="3" type="T">Message was read from persist layer. OK. </Trace>
<Trace level="3" type="T">Message properties in XMB object were setup. OK. </Trace>
<Trace level="3" type="ToDo">Make sure we catch exceptions in persist read </Trace>
<Trace level="3" type="ToDo">Tracing obj. not avail. before return of CL_XMS_MAIN-PERSIST_READ_MESSAGE</Trace>
</Trace>
<Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>
<Trace level="1" type="B" name="SXMS_ASYNC_EXEC"></Trace>
<Trace level="3" type="T">message version successfully read from persist version= 004</Trace>
<Trace level="2" type="T">Increment log sequence to 005</Trace>
<Trace level="1" type="T">----------------------------------------------------- </Trace>
<Trace level="1" type="T">Starting async processing with pipeline CENTRAL</Trace>
<Trace level="3" type="T">system-ID = DGX</Trace>
<Trace level="3" type="T">client = 100</Trace>
<Trace level="3" type="T">language = E</Trace>
<Trace level="3" type="T">user = XIAFUSERDGX</Trace>
<Trace level="1" type="Timestamp">2007-01-07T12:48:43Z CET </Trace>
<Trace level="1" type="T">----------------------------------------------------- </Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC"></Trace>
<Trace level="1" type="T">Get definition of external pipeline CENTRAL</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID">
<Trace level="3" type="T">External PLID = CENTRAL</Trace>
<Trace level="3" type="T">Internal PLID = SAP_CENTRAL</Trace>
</Trace>
<Trace level="1" type="T">Corresponding internal pipeline SAP_CENTRAL</Trace>
<Trace level="3" type="T"> </Trace>
<Trace level="3" type="T">Pipeline attributes </Trace>
<Trace level="3" type="T">PID        = SAP_CENTRAL</Trace>
<Trace level="3" type="T">ENABLE     = 1</Trace>
<Trace level="3" type="T">TRACELEVEL = 0</Trace>
<Trace level="3" type="T">EXEMODE    = A</Trace>
<Trace level="3" type="T"> </Trace>
<Trace level="3" type="T"> </Trace>
<Trace level="3" type="T">Pipeline elements </Trace>
<Trace level="3" type="T">ELEMPOS    = 0001</Trace>
<Trace level="3" type="T">PLSRVID    = PLSRV_RECEIVER_DETERMINATION</Trace>
<Trace level="3" type="T">PLSRVTYPE = </Trace>
<Trace level="3" type="T">FL_DUMMY   = 0</Trace>
<Trace level="3" type="T"> </Trace>
<Trace level="3" type="T">ELEMPOS    = 0002</Trace>
<Trace level="3" type="T">PLSRVID    = PLSRV_INTERFACE_DETERMINATION</Trace>
<Trace level="3" type="T">PLSRVTYPE = </Trace>
<Trace level="3" type="T">FL_DUMMY   = </Trace>
<Trace level="3" type="T"> </Trace>
<Trace level="3" type="T">ELEMPOS    = 0003</Trace>
<Trace level="3" type="T">PLSRVID    = PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
<Trace level="3" type="T">PLSRVTYPE = </Trace>
<Trace level="3" type="T">FL_DUMMY   = </Trace>
<Trace level="3" type="T"> </Trace>
<Trace level="3" type="T">ELEMPOS    = 0004</Trace>
<Trace level="3" type="T">PLSRVID    = PLSRV_MAPPING_REQUEST</Trace>
<Trace level="3" type="T">PLSRVTYPE = </Trace>
<Trace level="3" type="T">FL_DUMMY   = </Trace>
<Trace level="3" type="T"> </Trace>
<Trace level="3" type="T">ELEMPOS    = 0007</Trace>
<Trace level="3" type="T">PLSRVID    = PLSRV_OUTBOUND_BINDING</Trace>
<Trace level="3" type="T">PLSRVTYPE = </Trace>
<Trace level="3" type="T">FL_DUMMY   = </Trace>
<Trace level="3" type="T"> </Trace>
<Trace level="3" type="T">ELEMPOS    = 0008</Trace>
<Trace level="3" type="T">PLSRVID    = PLSRV_CALL_ADAPTER</Trace>
<Trace level="3" type="T">PLSRVTYPE = =SWITCH=</Trace>
<Trace level="3" type="T">FL_DUMMY   = </Trace>
<Trace level="3" type="T"> </Trace>
<Trace level="3" type="T">ELEMPOS    = 0009</Trace>
<Trace level="3" type="T">PLSRVID    = PLSRV_MAPPING_RESPONSE</Trace>
<Trace level="3" type="T">PLSRVTYPE = </Trace>
<Trace level="3" type="T">FL_DUMMY   = </Trace>
<Trace level="3" type="T"> </Trace>
<Trace level="3" type="T"> </Trace>
<Trace level="1" type="Timestamp">2007-01-07T12:48:43Z CET Begin of pipeline processing PLSRVID = CENTRAL</Trace>
<Trace level="1" type="T">Start with pipeline element PLEL= 5EC3C53B4BB7B62DE10000000A1148F5</Trace>
<Trace level="1" type="B" name="PLSRV_MAPPING_REQUEST">
<Trace level="1" type="Timestamp">2007-01-07T12:48:43Z CET Start of pipeline service processing PLSRVID= PLSRV_MAPPING_REQUEST</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
<Trace level="3" type="T">Calling pipeline service: PLSRV_MAPPING_REQUEST</Trace>
<Trace level="3" type="T">Reading Pipeline-Service specification... </Trace>
<Trace level="3" type="T"> </Trace>
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV) </Trace>
<Trace level="3" type="T">PLSRVID    = PLSRV_MAPPING_REQUEST</Trace>
<Trace level="3" type="T">PLSRVTYPE = </Trace>
<Trace level="3" type="T">ADRESSMOD = LOCAL</Trace>
<Trace level="3" type="T">P_CLASS    = CL_MAPPING_XMS_PLSRV3</Trace>
<Trace level="3" type="T">P_IFNAME   = IF_XMS_PLSRV</Trace>
<Trace level="3" type="T">P_METHOD   = ENTER_PLSRV</Trace>
<Trace level="3" type="T">FL_LOG     = </Trace>
<Trace level="3" type="T">FL_DUMMY   = 0</Trace>
<Trace level="3" type="T"> </Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
<Trace level="1" type="B" name="CL_MAPPING_XMS_PLSRV3-ENTER_PLSRV">
<Trace level="2" type="T">......attachment XI_Context not found </Trace>
<Trace level="3" type="T">Mapping is already determined in the interface determination </Trace>
<Trace level="3" type="T">Object ID of Interface Mapping DA461E413F303668931A977B9D811191 </Trace>
<Trace level="3" type="T">Version ID of Interface Mapping B2CF8EF067FF11DBA742D7830A967135 </Trace>
<Trace level="1" type="T">Mapping-Object-Id:DA461E413F303668931A977B9D811191 </Trace>
<Trace level="1" type="T">Mapping-SWCV:B2CF8EF067FF11DBA742D7830A967135 </Trace>
<Trace level="1" type="T">Mapping-Step:1 </Trace>
<Trace level="1" type="T">Mapping-Type:JAVA </Trace>
<Trace level="1" type="T">Mapping-Program:com/sap/xi/tf/_MM_M_StockMov_To_SAP_ </Trace>
<Trace level="3" type="T">Dynamic configuration is empty </Trace>
<Trace level="3" type="T">Multi mapping required. </Trace>
<Trace level="3" type="T">Creating Java mapping com/sap/xi/tf/_MM_M_StockMov_To_SAP_. </Trace>
<Trace level="3" type="T">Load b2cf8ef0-67ff-11db-a742-d7830a967135, http://aaaa.com/xi/PROCESS/PPE/ERP_MES, -1, com/sap/xi/tf/_MM_M_StockMov_To_SAP_.class. </Trace>
<Trace level="3" type="T">Search com/sap/xi/tf/_MM_M_StockMov_To_SAP_.class (http://aaaa.com/xi/PROCESS/PPE/ERP_MES, -1) in swcv b2cf8ef0-67ff-11db-a742-d7830a967135. </Trace>
<Trace level="3" type="T">Loaded class com.sap.xi.tf._MM_M_StockMov_To_SAP_ </Trace>
<Trace level="2" type="T">Call method execute of the application Java mapping com.sap.xi.tf._MM_M_StockMov_To_SAP_ </Trace>
<Trace level="2" type="T">Java mapping com/sap/xi/tf/_MM_M_StockMov_To_SAP_ completed. (executeStep() of com.sap.xi.tf._MM_M_StockMov_To_SAP_ </Trace>
<Trace level="3" type="T">Message Type 1 Number of messages 1 </Trace>
<Trace level="3" type="T">Dynamic configuration is empty </Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="Timestamp">2007-01-07T12:48:43Z CET End of pipeline service processing PLSRVID= PLSRV_MAPPING_REQUEST</Trace>
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST">
<Trace level="3" type="T">Persisting message after plsrv call </Trace>
<Trace level="3" type="T">Message-Version = 005</Trace>
<Trace level="3" type="T">Message version 005</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
</Trace>
<Trace level="1" type="B" name="PLSRV_OUTBOUND_BINDING">
<Trace level="1" type="Timestamp">2007-01-07T12:48:43Z CET Start of pipeline service processing PLSRVID= PLSRV_OUTBOUND_BINDING</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
<Trace level="3" type="T">Calling pipeline service: PLSRV_OUTBOUND_BINDING</Trace>
<Trace level="3" type="T">Reading Pipeline-Service specification... </Trace>
<Trace level="3" type="T"> </Trace>
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV) </Trace>
<Trace level="3" type="T">PLSRVID    = PLSRV_OUTBOUND_BINDING</Trace>
<Trace level="3" type="T">PLSRVTYPE = </Trace>
<Trace level="3" type="T">ADRESSMOD = LOCAL</Trace>
<Trace level="3" type="T">P_CLASS    = CL_XMS_PLSRV_OUTBINDING</Trace>
<Trace level="3" type="T">P_IFNAME   = IF_XMS_PLSRV</Trace>
<Trace level="3" type="T">P_METHOD   = ENTER_PLSRV</Trace>
<Trace level="3" type="T">FL_LOG     = </Trace>
<Trace level="3" type="T">FL_DUMMY   = 0</Trace>
<Trace level="3" type="T"> </Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL"></Trace>
<Trace level="1" type="B" name="CL_XMS_PLSRV_OUTBINDING-ENTER_PLSRV">
<Trace level="2" type="T">O U T B O U N D - B I N D I N G </Trace>
<Trace level="2" type="T"> Cache Content is up to date </Trace>
<Trace level="2" type="T">determine OUTBOUND BINDING for: </Trace>
<Trace level="2" type="T">-Bs_MES_Stock_proxy </Trace>
<Trace level="2" type="T">-SAP_ERP_azar_DEV </Trace>
<Trace level="2" type="T">http://aaaa.com/xi/PROCESS/PPE/ERP_MES.MI_IN_S_StockMov </Trace>
<Trace level="2" type="T">Channel found: - SAP_ERP_azar_DEV - CC_IN_XI_Proxy </Trace>
<Trace level="2" type="T">no header mapping defined </Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="Timestamp">2007-01-07T12:48:43Z CET End of pipeline service processing PLSRVID= PLSRV_OUTBOUND_BINDING</Trace>
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST">
<Trace level="3" type="T">Persisting message after plsrv call </Trace>
<Trace level="3" type="T">Message-Version = 006</Trace>
<Trace level="3" type="T">Message version 006</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
</Trace>
<Trace level="1" type="B" name="PLSRV_CALL_ADAPTER"></Trace>
<Trace level="1" type="Timestamp">2007-01-07T12:48:43Z CET Start of pipeline service processing PLSRVID= PLSRV_CALL_ADAPTER</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV"></Trace>
<Trace level="3" type="T">Calling pipeline service: PLSRV_CALL_ADAPTER</Trace>
<Trace level="3" type="T">Reading Pipeline-Service specification... </Trace>
<Trace level="3" type="T"> </Trace>
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV) </Trace>
<Trace level="3" type="T">PLSRVID    = PLSRV_CALL_ADAPTER</Trace>
<Trace level="3" type="T">PLSRVTYPE = =SWITCH=</Trace>
<Trace level="3" type="T">ADRESSMOD = SD</Trace>
<Trace level="3" type="T">P_CLASS    = </Trace>
<Trace level="3" type="T">P_IFNAME   = </Trace>
<Trace level="3" type="T">P_METHOD   = </Trace>
<Trace level="3" type="T">FL_LOG     = </Trace>
<Trace level="3" type="T">FL_DUMMY   = 0</Trace>
<Trace level="3" type="T"> </Trace>
<Trace level="3" type="T">Channel for Integration Engine: XI</Trace>
<Trace level="3" type="T"> </Trace>
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV) </Trace>
<Trace level="3" type="T">PLSRVID    = PLSRV_CALL_ADAPTER</Trace>
<Trace level="3" type="T">PLSRVTYPE = IENGINE</Trace>
<Trace level="3" type="T">ADRESSMOD = SD</Trace>
<Trace level="3" type="T">P_CLASS    = CL_XMS_PLSRV_IE_ADAPTER</Trace>
<Trace level="3" type="T">P_IFNAME   = IF_XMS_PLSRV</Trace>
<Trace level="3" type="T">P_METHOD   = ENTER_PLSRV</Trace>
<Trace level="3" type="T">FL_LOG     = </Trace>
<Trace level="3" type="T">FL_DUMMY   = 0</Trace>
<Trace level="3" type="T"> </Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL"></Trace>
<Trace level="1" type="B" name="CL_XMS_PLSRV_IE_ADAPTER-ENTER_PLSRV">
<Trace level="3" type="T">Channel for Integration Engine: XI</Trace>
<Trace level="1" type="T">Sender: Header mapped to</Trace>
<Trace level="1" type="T">Party = </Trace>
<Trace level="1" type="T">Agency = </Trace>
<Trace level="1" type="T">Scheme = </Trace>
<Trace level="1" type="T">Service = Bs_MES_Stock_proxy</Trace>
<Trace level="1" type="T">Receiver: Header mapped to</Trace>
<Trace level="1" type="T">Party = </Trace>
<Trace level="1" type="T">Agency = </Trace>
<Trace level="1" type="T">Scheme = </Trace>
<Trace level="1" type="T">Service = SAP_ERP_azar_DEV</Trace>
<Trace level="1" type="T">Party denormalization: sender </Trace>
<Trace level="1" type="T">Sender target scheme = </Trace>
<Trace level="1" type="T">Sender target agency = </Trace>
<Trace level="1" type="T">Sender party normalized = </Trace>
<Trace level="1" type="T">Sender party external = </Trace>
<Trace level="1" type="T">Party denormalization: receiver </Trace>
<Trace level="1" type="T">Receiver target scheme = </Trace>
<Trace level="1" type="T">Receiver target agency = </Trace>
<Trace level="1" type="T">Receiver party normalized = </Trace>
<Trace level="1" type="T">Receiver party external = </Trace>
<Trace level="1" type="B" name="CL_XMS_PLSRV_CALL_XMB-CALL_XMS_HTTP">
<Trace level="2" type="T">Addressing mode: url</Trace>
<Trace level="3" type="T">Host = dceazar01</Trace>
<Trace level="3" type="T">Port = 8010</Trace>
<Trace level="3" type="T">Transport protocol = HTTP      1.0</Trace>
<Trace level="3" type="T">Message protocol = </Trace>
<Trace level="3" type="T">Path = sap/xi/engine?type=receiver</Trace>
<Trace level="2" type="T">Auth mode: basicSAP</Trace>
<Trace level="3" type="T">Conversion of language from char2 to char1 EN</Trace>
<Trace level="3" type="T">User = asar</Trace>
<Trace level="3" type="T">Client = 400</Trace>
<Trace level="3" type="T">Language = E</Trace>
<Trace level="3" type="T">Creating HTTP-client </Trace>
<Trace level="3" type="T">HTTP-client: creation finished</Trace>
<Trace level="3" type="T">Security: Basic authentication SAP </Trace>
<Trace level="3" type="T">Serializing message object... </Trace>
<Trace level="3" type="T">HTTP-client: sending http-request...</Trace>
<Trace level="3" type="T">HTTP-client: request sent</Trace>
<Trace level="3" type="T">HTTP-client: Receiving http-response...</Trace>
<Trace level="3" type="T">HTTP-client: response received</Trace>
<Trace level="3" type="T">HTTP-client: checking status code...</Trace>
<Trace level="3" type="T">HTTP-client: status code = 500 </Trace>
<Trace level="3" type="T">Deserializing message object... </Trace>
<Trace level="3" type="System_Error">HTTP-client: error response= <html><head><title>SAP Web Application Server Error</title>
<style type="text/css">
body { font-family: arial, sans-serif;}
</style>
</head>
<BODY text="#172972" link="#808080" vlink="#808080"
alink="#8e236b" bgcolor=white leftmargin="0" topmargin="0"
marginheight="0" marginwidth="0">
<table height="61" width="100%" border="0" cellspacing="0"
cellpadding="0"><tr><td background="http://dceazar01:8010/sap/public/icman/img/bluebar_tile.gif"
height="30"><table> <tr> <td width=5></td> <td width=20% nowrap><font face=arial size="-1" color=white>SAP Web Application Server
</font></td><td width=75% align="right" nowrap><font face=arial
size="-1" color="white"><a href="http://help.sap.com/">Help
</font></td><td width=5% nowrap></font></td> </tr></table>
</td><td rowspan=2 width=122 height=61 valign=top><img src=
"http://dceazar01:8010/sap/public/icman/img/theme.jpg" width=122 height=61 border=0 alt="SAP"></td>
</tr><tr><td background="http://dceazar01:8010/sap/public/icman/img/graybar_tile.jpg" height="31">
</td></tr>
</table>
<br><br>
<table width=800>
<tr><td width=50 nowrap>
</td><td>
<H2><b>500 Internal Server Error</b></H2><br><hr><br>Internal Server Error(-1)<br><br><hr>
<table border="0">
<tr><td>Error:</td><td>-1</td></tr>
<tr><td>Version:</td><td>6040</td></tr>
<tr><td>Component:</td><td>HTTP_PLG</td></tr>
<tr><td>Date/Time:</td><td>Sun Jan 7 13:48:43 2007
</td></tr>
<tr><td>Module:</td><td>http_plg_mt.c</td></tr>
<tr><td>Line:</td><td>3505</td></tr>
<tr><td>Server:</td><td>dceazar01_SRD_10</td></tr>
<tr><td>Detail:</td><td>No handler defined for this URL</td></tr>
</table>
<p></p>
</td></tr></table>
<table><tr><td width=50 nowrap></td>
<td nowrap><FONT SIZE=-1><a href="http://www.sap.com/">© 2001-2005, SAP AG</a></FONT></td></tr></table></Trace>
<Trace level="3" type="T">HTTP-client: closing...</Trace>
</Trace>
<Trace level="2" type="T">Switch back to normalized party (HTTP response)</Trace>
<Trace level="1" type="T">Sender scheme external = </Trace>
<Trace level="1" type="T">Sender agency external = </Trace>
<Trace level="1" type="T">Sender party external = </Trace>
<Trace level="1" type="T">Sender party normalized = </Trace>
<Trace level="1" type="T">Party normalization: receiver </Trace>
<Trace level="1" type="T">Receiver scheme external = </Trace>
<Trace level="1" type="T">Receiver agency external = </Trace>
<Trace level="1" type="T">Receiver party external = </Trace>
<Trace level="1" type="T">Receiver party normalized = </Trace>
<Trace level="2" type="T">Undo header mapping (HTTP response) </Trace>
<Trace level="1" type="T">Sender: Header before undo of mapping</Trace>
<Trace level="1" type="T">Party = </Trace>
<Trace level="1" type="T">Agency = </Trace>
<Trace level="1" type="T">Scheme = </Trace>
<Trace level="1" type="T">Service = Bs_MES_Stock_proxy</Trace>
<Trace level="1" type="T">Receiver: Header before undo of mapping</Trace>
<Trace level="1" type="T">Party = </Trace>
<Trace level="1" type="T">Agency = </Trace>
<Trace level="1" type="T">Scheme = </Trace>
<Trace level="1" type="T">Service = SAP_ERP_azar_DEV</Trace>
<Trace level="2" type="T">Sender: Header after undo of mapping</Trace>
<Trace level="2" type="T">Party = </Trace>
<Trace level="2" type="T">Agency = </Trace>
<Trace level="2" type="T">Scheme = </Trace>
<Trace level="2" type="T">Service = Bs_MES_Stock_proxy</Trace>
<Trace level="2" type="T">Receiver: Header before undo of mapping</Trace>
<Trace level="2" type="T">Party = </Trace>
<Trace level="2" type="T">Agency = </Trace>
<Trace level="2" type="T">Scheme = </Trace>
<Trace level="2" type="T">Service = SAP_ERP_azar_DEV</Trace>
</Trace>
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST">
<Trace level="3" type="T">Persisting message after plsrv call </Trace>
<Trace level="3" type="T">Message-Version = 007</Trace>
<Trace level="3" type="T">Message version 007</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
</Trace>
<Trace level="3" type="System_Error">Error exception return from pipeline processing! </Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST"></Trace>
<Trace level="3" type="T">Persisting message Status = 014</Trace>
<Trace level="3" type="T">Message version 008</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
</SAP:Trace>
please guide me ...
regards
Ram

File To Proxy : Handle the response from ECC to send mail without BPM

Hi,
Scenario: FILE To Proxy
Requirement: We are receiving xml acknowledgement file from bank with IDoc number and status in SAP PI and the file is used to send the status number, message and and IDoc number to ECC. After request is received in ECC BAPI is executed to update the original status of outbound IDOC.
There would be multiple records in file and PI will send all IDoc acknowledgement to ECC to update the IDoc status.
Issue: Since PI send all records to ecc, if any single IDoc status update is failing in ECC how would it can be communicated to support.
ECC can send success or error response in proxy but how we can use the same in PI to send mail to support. Or is there any better error handling we can go for in such scenario.
Thanks,
Vertika

Hi everyone
thanks for response.
Interface 1: IDoc (ECC) to File (Bank) --> Done
Interface 2: Acknowledgment File (Bank) to BAPI (ECC) where BAPI will update the status of IDoc sent in first interface.
For Interface 2 : PI will receive file from Bank with multiple records i.e multiple IDoc numbers and their status. PI will invoke proxy to send the IDoc number and status number (eg 16) for all the records together. Now if BAPI fails to update status of any single IDoc in that file how support team will know that the particular record is failed. To handle this error ECC is saying they can send Error and Success back to PI. But the problem is how we can use that response in PI in the same interface to send emails to support team. Bank does not want any response back in this case. This is just to ensure proper error handling since this is bank related interface.
Splitting the interface in two interfaces will definitely help. But is there some way which can be used in same interface and based on error response from ECC mail is triggered.
If any one has better suggestion for such kind of error handling, please post the same.
Thanks,
Vertika

[Error] Microsoft SQL Server 2008 Setup. Error reading from file msdbdata.mdf

Hi all
I'm trying to install SQL 2008 Express on my Computer: Hp compact DX7300 Slim tower.
and get this error:
TITLE: Microsoft SQL Server 2008 Setup
The following error has occurred:Error reading from file d:\8268cd7b247d294de359c9\x86\setup\sql_engine_core_inst_msi\PFiles\SqlServr\MSSQL.X\MSSQL\Binn\Template\msdbdata.mdf. Verify that the file exists and that you can access it.
Click 'Retry' to retry the failed action, or click 'Cancel' to cancel this action and continue setup.
For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=10.0.1823.0&EvtType=0xF45F6601%25401201%25401
Log file
Overall summary:
Final result: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then rerun SQL Server Setup.
Exit code (Decimal): -2068643839
Exit facility code: 1203
Exit error code: 1
Exit message: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then rerun SQL Server Setup.
Start time: 2014-12-09 23:22:03
End time: 2014-12-09 23:40:28
Requested action: Install
Log with failure: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20141209_232121\sql_engine_core_inst_Cpu32_1.log
Exception help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=10.0.1823.0
Machine Properties:
Machine name: VISTA-PC
Machine processor count: 2
OS version: Windows Vista
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x86
Process architecture: 32 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered
Package properties:
Description: SQL Server Database Services 2008
SQLProductFamilyCode: {628F8F38-600E-493D-9946-F4178F20A8A9}
ProductName: SQL2008
Type: RTM
Version: 10
SPLevel: 0
Installation location: d:\8268cd7b247d294de359c9\x86\setup\
Installation edition: EXPRESS
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: False
AGTSVCACCOUNT: NT AUTHORITY\NETWORK SERVICE
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Disabled
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASDOMAINGROUP: <empty>
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: *****
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Disabled
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20141209_232121\ConfigurationFile.ini
ENABLERANU: True
ERRORREPORTING: False
FEATURES: SQLENGINE,REPLICATION
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: <empty>
FTSVCPASSWORD: *****
HELP: False
INDICATEPROGRESS: False
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: SQLExpress
INSTANCENAME: SQLEXPRESS
ISSVCACCOUNT: NT AUTHORITY\NetworkService
ISSVCPASSWORD: *****
ISSVCSTARTUPTYPE: Automatic
MEDIASOURCE: d:\8268cd7b247d294de359c9\
NPENABLED: 0
PID: *****
QUIET: False
QUIETSIMPLE: False
RSINSTALLMODE: FilesOnlyMode
RSSVCACCOUNT: <empty>
RSSVCPASSWORD: *****
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: NT AUTHORITY\NETWORK SERVICE
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: VISTA-PC\VISTA
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: False
TCPENABLED: 0
X86: False
Configuration file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20141209_232121\ConfigurationFile.ini
Detailed results:
Feature: Database Engine Services
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: SQL Server Replication
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20141209_232121\SystemConfigurationCheck_Report.htm
I will very appriciate if someone can help me solve it. I was trying to set Full control for my account in Properties/Security of root folder and try again but error is still.
Many thanks

Hi Foreverduy,
Before you run SQL Server 2008 express setup, make sure that you have installed Windows installer 4.5 and.NET Framework 3.5 SP1 manually. For more information about the process, please refer to the article:
http://msdn.microsoft.com/en-us/library/ms143506(v=sql.100).aspx. Moreover, please turn off all the third-party softwares which could prohibit the installation process.
According to your error message, the issue could be due to that your account has no rights to install SQL Server, or the corruption on the media.
Firstly, please ensure that your account has admin rights. Also make sure that you right-click the setup.exe and choose “Run as administrator” to complete the installation.
Secondly, please check if "msdbdata.mdf" file exists at d:\8268cd7b247d294de359c9\x86\setup\sql_engine_core_inst_msi\PFiles\SqlServr\MSSQL.X\MSSQL\Binn\Template. If it exists, please make sure that your account has read permission to the extracted
folder.
However, if the file doesn't exist in the extraction, the media could be corrupt. Please download the
media
again and check if the issue still occurs.
Regards,
Michelle Li

Error in FILE 2 Proxy Scenario

Hi All,
I am doing File to Proxy Scenario i am getting following error
Could any one provide the solution for this.
*<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>*
*- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIProxy</SAP:Category>
<SAP:Code area="ABAP">INTERFACE_REGISTRATION_ERROR</SAP:Code>
<SAP:P1>ifmmessif</SAP:P1>
<SAP:P2>MI_Emp_Sender</SAP:P2>
<SAP:P3>Namespace</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>No implementing class registered for the interface (ABAP interface, request message MI_Emp_Sender, request message, namespace )</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
Thanks in Advance
Mahesh
</SAP:Error>
Edited by: Mahesh Reddy on Jul 10, 2008 12:47 PM

Hi Mahesh,
1) Use SPROXY transaction.
Menu-> Proxy -> Activate All.
2) check in the interface determination if u are using correct
inbound interface.
3) If this if fine....try deleting all proxy objects of the interface
and create new.
Regards,
Praveen K

File to Proxy Scenari0, Error in ECC server Messages stucked in Queue

Similar Messages

Maybe you are looking for