File transfer from one smaller Lacie to bigger Lacie: A problem

Dear friends
I purchased another bigger Lacie drive with more memory. I followed the instruction and backed up all files from internal drive to this new Drive. Since my smaller Lacie was getting very full I also transferred all my FCP files by dragging them to the new lacie drive. But in the process something strange happened:
When I open the fcp files from this new Lacie they all go offline, and when I try to reconnect them they don't go online. On the other hand, when I open fcp project files from my old lacie the files open but after a long time & after a lot of clicking & when the circling of the little circle stops. Sometimes, the little circle doesn't stop at all unless I force quit. I must have done something wrong transferring the files. What could it be, and how can I fix the problem? I would be grateful to you to help me to solve this problem step by step. faruk

Hi Andy
I am sorry I keep coming back, but I believe I am getting very close to solving this mysterious aspect of fcp's with your help & encouragement.
1. When both lacies of the same name are connected to 800 ports I get to my projects online regardless which of the 2 paths I take: Macintosh HD/users/....or Big lacie/powerbook Backup/Macintosh HD/users. Therefore, question of media reconnection doesn't seem to apply here.
2. When small lacie is connected & the big one not, I still get to my projects online no matter which the two paths I take. Here also Media connection doesn't seem to apply either.
3. The only time the projects go offline & Media connection seem to apply is when big lacie is connected & the small one is not regardless which of the two paths I take. When I click to reconnect in this case I get the following messages:
a. There are no clips selected that have files associated with them.
When I select a clip or the sequence in the browser I get file Attribute Mismach which says:
Some attributes of one or more of the files you have chosen do not match the attributes of the original. This may cause problems within the sequences that are dependent on them, the attributes that differed are as follows: -Media start and End. Would you like to connect them again?
When I click continue it says; one or more files did not have enough media to recconect some clips. Some edited clip items have had their out point adjusted.
b. "I did move around clips & folders from one project to another, but that's it. But the fact is that inside FCP folder I created in big lacie I do see all media files you have mentioned & the box is ticked already.
c. But when I click Macintosh HD in the the first column where all FCP files are installed I get the following:
Second column: capture scratch, audio render files, & render files
Third Column: Only Capture Scratch opens & I get the same three folders
Fourth column: Again, only Capture Scratch opens, but opens strangely to one of my projects Maps & when I click the project, it opens to a fourth column as the same three in the Second Column.
Fifth Column: Strangely again Olnly Scratch Disk opens to the next column with the same three folders & the same process continue to two more columns & then stops opening. What did do wrong. should I delete files in the big lacie & start all over again, painful as it is? Have best weekend. faruk

Similar Messages

  • Getting error in file transfer from one system to another system

    Hi All
    One of my client (User) wants to transfer his file from  SAP R/3 System SAP XI system. He is using a customize t-code ZFIR0325 (Trial balance report transfer to Hyperian System). When user execute the  program he is getting error "File Transfer Failed due to Network chk with Admin"
    I checked with Network team but they said it is okay from their side. We also check for authorization but there is no issue regarding authorization.
    Name of File Path of Aplication Server, XI destinaion and XI directory entered by user is correct.
    We also put authorization trace in XI System to RFC User (In file transfer from one system to another system this RFC User is geeing Used) but no authorization issue was found.
    Please help me to resolve this problem. I any detail require I will provide the same.

    Guruprasad Wrote:
    He is using a customize t-code ZFIR0325 (Trial balance report transfer to Hyperian System).
    We also put authorization trace in XI System to RFC User (In file transfer from one system to another system this RFC User is geeing Used) but no authorization issue was found.
    Firstly, no one in the community can answer on how a custom transcation code and a program associated with it behaves.
    If there are no authorization issues in the system, you have to look at the exact error message. Look if your XI system is allowed to receive files from the SAP system.
    Unfortunately, you should do some more home work before putting your question here. If everything is fine and configured correctly, then the issue might be with the program.
    Regards,
    Raghu

  • File transfer from one system to another system

    How can I use ODI to do file transfer from one system to another system ?
    Do I need to create Models or I have to simply use Jython procedure/script to do the same ? Kindly help. I have done DB to DB using Knowledge Modules. But I am not able to understand this piece.
    Kindly help.

    If you are asking about file transfer use ODI FTP tool to do it. If you are asking about file transformation..
    You can not do file transformation directly in ODI like we do in any other ETL tool like data stage or Ab Initio.. File transformation in ODI can be done using staging database in an interface(i.e ELT way).
    Create source and target data stores for the file to be transformed. Create an interface using File to SQL LKM to load the file into staging database and then use SQL to File Integration knowledge module.
    Thanks,
    D

  • Vendor Open items transfer from one Recon to Another recon

    We have wrongly maintained one recon account in Vendor. 
    Is there any way to trnasfer Vendor Open items transfer from one Recon to Another reconciliation account..

    Hi,
    The best way is to transfer the items from old to new reconciliation account.
    Please use the following entries to transfer.
    1. Dr Vendor a/c(Old recon a/c)
        Cr Vendor clearing a/c
    After nullifying the balance in old recon account, here chage recon in the master.
    2. Dr Vendor clearing a/c
        Cr Vendor a/c(New recon a/c)
    F101 only post the adjustment entry at period end and reverse the same entry in next period. So, transferring the items is the best method. If you have volume of data, then create a LSMW for this.
    Rgds
    Murali. N

  • Transfer from One Consignment stockiest to another

    Hi,
    I transferred material from manufacturing plant to one consignment stockiest through Fill up Order. Now I want to transfer material from this consignment stockiest to another consignment stockiest without taking material back to the plant.
    How can I do this in SAP..?
    Regards,
    Falgun

    Dear Falgun,
    There is no any standard solution for the scenarios e.g.,  stock transfer from one consg agnt to another consg agnt (In your case one stockiest to another).  Better you first create pick up against the fill up, and create Fill Up for correct stockiest.
    Thnx,
    Pratik

  • Process steps for Capital goods transfer from one exciseable plant to another exciseable plant

    Please guide me about below mention process :
    Capital goods transfer from one exciseable plant to another exciseable plant with updation of RG23C register.
    Goods purchase in prev month.

    Company code to company code u have to treat the another company as Vendor/Customer in each company code books. Then the process is same.  Sale order, delivery and billing to the Customer(2nd company code i.e. stock receiving company code).  Then in receiving company code based on the delivery document of other company code GR can be made. and IV.

  • From Forms 5.0 I want to copy a file/folder from one location to another.

    Hi,
    I have a question and I really appreciate your help.
    My Question is
    I would like to copy a file/folder from one location to another.
    (For ex: From my Hard disk to a Network folder).
    I want to do this from Oracle Forms 5.0 and my operating system is Windows 2000/NT Workstation.
    At present my users are doing this by using drag and drop windows functionality,
    But now they want to do this by using a GUI screen.
    I would greatly appreciate if somebody can answer my question.
    Thank you very much and have a nice day.
    Thanks & Regards
    Sanjeev.

    Hi Shay,
    Am able to copy the files/folders by doing the follwing.
    Declare
    My_Command Varchar2(1000);
    Begin
    MY_COMMAND := 'XCOPY /E ' ||:FROM_LOC ||' '|| :TO_LOC ;
    HOST(MY_COMMAND);
    End;
    But my problem is am not able to trap the errors.
    Do you have any idea?
    Thanks

  • File Transfer From Unix server to Windows Client System Using WebUtil

    Hi all,
    I want to Transfer a File from Unix Server to Window Client System using Webutil. But below mention code is not working.
    DECLARE
         V_Server_Path VARCHAR2(500) := Null;
         V_Client_Path VARCHAR2(500) := Null;
    BEGIN
         V_Server_Path := '/proj/oraapps/viper/dev/reports/cache/Saveauftr.txt';
         V_Client_Path := 'C:\Migration\EU_Applications\Lima\OAS_WorkArea\Client\Saveauftr.txt';
         IF WebUtil_File_Transfer.Is_AS_Readable(V_Server_Path) THEN
         IF WebUtil_File_Transfer.AS_To_Client(V_Client_Path,V_Server_Path) THEN
              Message('Downloading the File ..... .... ... .. .');
              Message('Downloading Was Successfull ...');
              Message('File Transfer from Server Was Successfull ...');
         END IF;
    END IF;
    END;
    Can anyone suggest me,Why the above code is not working and what to do for solve the Problem.
    Regards
    Gany

    Hello,
    You have more chances to get an answer in the Oracle Forms OTN Forum :
    Forms
    Regards

  • How do I transfer from one ArrayList to another -

    Hi
    Basically what I want to do is transfer from one arayList to another using an iterator to iterate of the list and transfer certain entries to another - one is called lots, the other is called unsold.
    I don't want help with trying to get the right fields to transfer at the moment I'm just trying to get it to transfer EVERY entry, which I cant seem to to with this while loop
    public ArrayList getUnsold()
           Iterator it = lots.iterator();
            while(it.hasNext()) {
                    Lot lot = (Lot) it.next();
                    unsold.add(lot.getDescription());
                    return unsold;With the above all I seem to get is the first item in the 'lots' list to transfer even though theree are 3 items that need to be transferred...
    I have declared all arraylists and everything on this level works I just cant transfer items over properly...
    Any help is most appreciated.
    -greg

    Add these print statements (and others you think might help) to help you see what's going on: public ArrayList getUnsold()
           Iterator it = lots.iterator();
            while(it.hasNext()) {
                    Lot lot = (Lot) it.next();
                    System.out.println(lot);
                    System.out.println(lot.getDescription)());
                    unsold.add(lot.getDescription());
                    System.out.println(unsold);

  • HT4528 If I transfer from one iPhone 4 to another iPhone 4 will I lose my voicemails?

    If I transfer from one iPhone 4 to another iPhone 4 will I lose my voicemails?

    Not if you backup your old phone and then restore your new phone to that backup http://support.apple.com/kb/HT1766

  • I just installed photoshop ele. ver 11 and my file transfer from version 10 failed, what do I do?

    I just installed photoshop ele. ver 11 and my file transfer from version 10 failed, what do I do?

    I was transering my album from version 10 to version 11.  I got on-line help and I and all set.  Thanks for getting back to me.  Dave
    Scott V <[email protected]> wrote:
    Scott V http://forums.adobe.com/people/Scott+V created the discussion
    "Re: I just installed photoshop ele. ver 11 and my file transfer from version 10 failed, what do I do?"
    To view the discussion, visit: http://forums.adobe.com/message/5105851#5105851

  • I'm doing a transfer from one macbook pro to another. I have CS4 Photoshop Extended. When I go to open it on my new computer it says error 150:30.

    I'm doing a transfer from one macbook pro to another. I have CS4 Photoshop Extended. When I go to open it on my new computer it says error 150:30.

    Don't try transferring Adobe software. It rarely works and usually breaks the activation mechanism (150:30 error).
    Uninstall, run the Cleaner tool then re-install from scratch.
    Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

  • Stock Transfer from One Store to Store

    Hi Retail Gurus,
    I have just entered working on IS Retail,basically I am an SD consultant.I have a Client who has implemented IS Retail.
    Now,coming to the query,I want transfer the stock which is in Store A to Store B without any Valuation.
    Kindly Help Me,
    Vishal

    Dear Vishal,
    When articles removed under stock transfer from one site to other site, the overall inventory valuation, at company code level, remains same. Because, inventory valuation must remains same, the accounting document is posted at the time of PGI (post goods issue) from sending site.
    SAP Support following Stock transfers;
    (1) Store to Store single step using 301 mov. type
    (2) Store to Store double step using 303 & 305 mov. types
    (3) STO with SD route using 641 & 101 Mov. type
    Price: Always....Valuation price + Delivery costs if any
    Steps are as below for option No. 3
    1. Create Purchase Order using transaction code ME21N using document type UB
    2. Create outbound Delivery using transaction code VL10B
    3. Post Goods Issue using transaction code VL02N     
    4. Create Goods Receipt against STO Purchase Order reference using transaction code MIGO
    Hope this information will be useful.
    Bye,
    Muralidhara

  • Original File transfer from G4 to new G5

    About to buy G5 20" this week -
    Apple Store says they can do file transfer from my imac G4 to new G5 for me at time of purchase, but cannot transfer any 3rd party apps (Photoshop, Ill, DreamW, Acrobat, Word, etc.). However in users manual it looks like if I do it originally myself with SetUp assistant, I can include these apps -- but perhaps not later using Migration Assistant after Apple Store has used the SetUp assistant. I'd like to avoid having to re-install all my apps if possible.
    Also, If I do it SetUp Assistant myself, is it best to use Firewire cable vs. Ethernet?
    Any intelligence/advice would be appreciated.
    thanks

    I would just drag app files over via Firewire (which is superior over ethernet).
    Here is how it is done:
    http://docs.info.apple.com/article.html?artnum=58583

  • HT1345 I have a new iPodtouch 5th generation.  I currently have a 4th generation.  Is there an easy way to transfer from one to the other or should I start a new setup?

    I have a new iPodtouch 5th generation.  I currently have a 4th generation.  Is there an easy way to transfer from one to the other or should I start a new setup?

    Click here and follow the instructions.
    (95861)

Maybe you are looking for