File2file using FTP

hi....Friends,
i am doing file2file scenario using File Transfer Protocol (ftp), i am getting the error in sender communication channel monitoring . i.e
An error occurred while connecting to the FTP server 'xxx.x.xx.xxx:xx'. The FTP server returned the following error message: 'com.sap.aii.adapter.file.ftp.FTPEx: 530 Connection refused, unknown IP address.'. For details, contact your FTP server vendor.
Thanks in advance,
Pasi

Hi Pasi
First check wether the server details which you have mentioned in the adapter with using FTP command.
if you use FTP command in DOS mode to login into that server then your FTP in adapter will also work.
your server details are worng.
regards
Nisar

Similar Messages

Error while delibvering a report using FTP

Hi
I am trying to publish my report on a shared folder by using FTP server delivery. When the schedule gets run I can see following error displayed in the Publisher:
java.io.IOException: Invalid status of current connection: 0
     at oracle.apps.xdo.delivery.ftp.FTPMainConnection.checkUTF8Support(Unknown Source)
     at oracle.apps.xdo.delivery.ftp.FTPClient.connect(Unknown Source)
     at oracle.apps.xdo.delivery.ftp.FTPDeliveryRequestHandler.submitRequest(Unknown Source)
     at oracle.apps.xdo.delivery.AbstractDeliveryRequest.submit(Unknown Source)
     at oracle.apps.xdo.service.delivery.impl.DeliveryServiceImpl.deliverToFTP(DeliveryServiceImpl.java:519)
     at oracle.apps.xdo.servlet.scheduler.XDOJob.deliver(XDOJob.java:1417)
     at oracle.apps.xdo.servlet.scheduler.XDOJob.execute(XDOJob.java:478)
     at org.quartz.core.JobRunShell.run(JobRunShell.java:195)
     at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:520)
Status of teh job is comung as Failed - IO error.

Can you manually, as in command line, connect to the ftp site? Is it ftp or sftp? Single or double authentication?

Help needed for file processing using FTP

Hi All,
I am new to ODI tool and currently we are implementing one project in ODI. Could you please, any one help me on the following requirement... how to implement it?
Scenario:
i) I need to pick a file from remote host 'outbox' dir using FTP process, and place into local 'temp' dir. (I can do it with odiFTPGet tool)
ii) Change the file as per target business requirement.??? ( this step challenging me)
for ex:
if source file name : <project name>_<source ID>_<transaction name>_<unique id>.txt
target name should be : 1234_<transaction name>_<sysdate in yyyyMMddhhmmss>_<unique id>_2345.txt ( here 1234 and 2345 are hard coded values)
iii) Later move to local 'temp' to local 'outbox' dir. ( I can do it with odiFileMove tool)
iv) After successful process move the file from remote 'outbox' to remote 'archive' dir ??? (again this is challenging me).
For this my questions are:
1) How to get file name into a variable ( In one of the post , it says we need to create data model and data stores, and interface to get the file names into a file. apart from is there any easy way i can implement it in package it self?)
2) How to tokenize a long string ( i.e., need to tokenize the source file to get <unique id> and <transaction name> and map to target file name)
3) How to define implementation for Java in user function?? do we need to use class declarations and import statements?? I need a sample user function in Java.
4) How to move/rename a file in remote server?? ( need to move file from remote 'outbox' server to remote archive' dir)
5) If any step in package fails, How to get the error msg into a variable which i can use for sending mail and raise a ticket in remedy?? ( I will pass that variable to as content to mail and remedy ticket)
6) How to handle list type data (string list) by variables in ODI?? (As we can define single variable not as list.)
I am sorry to ask all my queries I a single post. But I need to solutions for all to implement this in my project.
Thanks in advance. Appreciate early response.
Regards,
Kiran.N

Can any one share your thoughts for my request.
Thanks in advance.
Regards,
Kiran

Transfering .csv file from SAP to NON-SAP using FTP connection

Dear All,
I am able to place the .CSV file successfully to other system using FTP connection, but when i open the file I could see the gaps between each record. I mean 1st line with the 1st record and 2nd line having a GAP and 3rd line with the 2nd record and so ..on as shown below
1     1/1/2009     0     41000027
2     1/1/2009     0     41000027
3     1/1/2009     0     41000027
I have declared an internal table as below
TYPES: BEGIN OF ty_charlist,
         line(5000) type c,
       END OF ty_charlist.
DATA: w_charlist TYPE ty_charlist,
             t_charlist TYPE TABLE OF ty_charlist.
And concatenating each field seperated by ','
CONCATENATE res1 res2 res3 res4 res5 res6 res7 res8 res9 res10 res11 res12 res13 res14 res15 res16 res17 res18 res19 res20 res21 res22 res23 res24 res25 res26 res27 res28 res29 res30 res31 res32 res33 res34 res35 res36 res37 res38 res39
INTO w_charlist-line SEPARATED BY ','.
APPEND w_charlist TO t_charlist.
Now T_CHARLIST contains 50 records which needs to be placed on other system. I can see 50 records but gap is coming
Here res1, res2 and so on are declared as TYPE STRING..
Please do help me this issue
Thanks
Prava

Hello dprava ,
Try to be assisted with these examples .
1. [http://wiki.sdn.sap.com/wiki/display/ABAP/FTPfiletransferinBackground]
2. [Reg: FTP Connection; - SAP examples programs
Thank you,
Boaz

How to send multiple files in parallel using ftp with single connection

Hi.
i have written code for file upload manager using ftp..
it perfectly working with sequence file uploading in single connection..
And i tried to upload multiple files with parallel processing in a single connection.... but it is not working properly.. i also used thread concept
but single file only transfered and connection refused...
my code here...
//////////////////// main class //////////////////////////////////////////
ftp.connect();
ftp.login();
String [] archivos = new String[100];
                                  File dir = new File("C:\\Files Uploading\\");
                                   archivos = dir.list();
                                   for (int s=0; s<archivos.length;s++)
     //Start Data Transfer Here
     new DataTransfer(archivos[s]).start();
                                   Thread.sleep(1000);
/////////////////////// thread class ////////////////////////////////
class DataTransfer extends Thread
      String FileName="";
      String LocalPath="",RemotePath="";
       public DataTransfer(String fname)
     FileName = fname;
     LocalPath = "C:\\Files Uploading\\" + FileName;
     RemotePath = FileName;
     System.out.println(LocalPath);
        public void run()
                    System.out.println("DataTransfer Started");
     /File Transfer Here
     try
           FileInputStream input = new FileInputStream(LocalPath);
                           Ftp_Client.storeFile(RemotePath,input);
     System.out.println("Successfully sent : " + RemotePath);
     catch (Exception exc)
          System.out.println(exc.getMessage());
          System.out.println("DataTransfer Ended");
     }otherwise tell me any other alternate way

And i tried to upload multiple files with
parallel processing in a single connection....
but it is not working properly.FTP isn't a multiplexing protocol. How could it work at all?

How can I create a directory on my server using FTP in applescript?

Hi
I have created a script which successfully uploads files to my server using FTP and a curl command.
The one thing I haven't worked out how to do is how to create a directory on my server using applescript. At the moment I have to manually create the correct directory for the script to work, but would like to be able to automate everything.
Would this be possible?
Thanks
Nick

Thanks Bernard.
I have tried that and still get the error message:
"curl: Can't open '--ftp-create-dirs'!
curl: try 'curl --help' or 'curl --manual' for more information
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
0 0 0 0 0 0 0 0 --:--:-- 0:00:01 --:--:-- 0
curl: (9) Server denied you to change to the given directory"
The other relevant parts of the script are:
set ftp_url to "ftp.****.org.uk/artists/" & artistName2 & "/assets/"
set ftp_username to "*****@*****.org.uk"
set ftp_password to "****"
set ftp_entire to ftp_username & ":" & ftp_password & " ftp://" & ftp_url
set outPath to outputFolder & fileCounter & ".jpg"
and then...
do shell script ("curl -T --ftp-create-dirs " & outPath & " -u " & ftp_entire)
Like I said, all works fine when the directories are already in place. I have permissions for the artists folder set to "777", i.e. writable. Because the script is trying to create two directories at once, i.e. "artistName2" and then "assets" under it, I wondered if this was significant, but then I tried with just one new directory, and still got the error.

Trying to use FTP to get data from a different server

Hi Friends,
    I have to use FTP to get data from a different server and upload it on SAP server. Now my problem is when I m trying to do ftp through command line it brings the file but with no data.
   Through ABAP program nothing is happening.
Here's my code--
V_PASSWORD = 'test@123'.
V_PWD_LEN = STRLEN( V_PASSWORD ).
CALL FUNCTION 'HTTP_SCRAMBLE'
    EXPORTING
      SOURCE      = V_PASSWORD
      SOURCELEN   = V_PWD_LEN
      KEY         = CS_KEY_500098
    IMPORTING
      DESTINATION = V_PASSWORD.
CALL FUNCTION 'FTP_CONNECT'
    EXPORTING
      USER            = 'test'
      PASSWORD        = V_PASSWORD
      HOST            = '176.0.1.6'
      RFC_DESTINATION = 'SAPFTPA'
    IMPORTING
      HANDLE          = MI_HANDLE
    EXCEPTIONS
      NOT_CONNECTED   = 1
      OTHERS          = 2.
CHECK SY-SUBRC = 0.
cmd = 'lcd d:\ftp'. .
PERFORM FTP_COMMAND USING CMD.
CMD = 'asc'.
PERFORM FTP_COMMAND USING CMD.
CONCATENATE 'dir' 'ftpt*' INTO CMD SEPARATED BY SPACE.
PERFORM FTP_COMMAND USING CMD.
cmd = 'ls'.
concatenate 'ls' INTO CMD SEPARATED BY SPACE.
PERFORM FTP_COMMAND USING CMD.
cmd = 'mget trial.txt'.
CONCATENATE 'mget' 'trial.txt' INTO CMD SEPARATED BY SPACE.
CALL FUNCTION 'FTP_COMMAND'
    EXPORTING
      HANDLE        = MI_HANDLE
      COMMAND       = CMD
    TABLES
      DATA          = MTAB_DATA1
    EXCEPTIONS
      TCPIP_ERROR   = 1
      COMMAND_ERROR = 2
      DATA_ERROR    = 3
      OTHERS        = 4.
IF SY-SUBRC = 0.
    LOOP AT MTAB_DATA1.
      WRITE: / MTAB_DATA1.
    ENDLOOP.
ELSE.
    CONCATENATE 'Error in FTP Command while executing' CMD INTO ERROR SEPARATED BY SPACE.
    WRITE: / ERROR.
ENDIF.

Hi
try this.....in one of my reqt, i done this successfully....
FORM FTPCON.
FTP-------------------------------------------------------*
CLEAR DSTLEN.
SET EXTENDED CHECK OFF.
DSTLEN = STRLEN( S_PWD ).     -
> (S_PWD (password) is a selection screen field )
CALL FUNCTION 'HTTP_SCRAMBLE'
    EXPORTING
      SOURCE      = S_PWD
      SOURCELEN   = DSTLEN
      KEY         = KEY
    IMPORTING
      DESTINATION = S_PWD.
CALL FUNCTION 'FTP_CONNECT'
    EXPORTING
      USER            = P_USER                   -
> Username
      PASSWORD        = S_PWD             -
> password
      HOST            = P_HOST                  -
> Host
      RFC_DESTINATION = P_DEST         -
> Destination
    IMPORTING
      HANDLE          = HDL
    EXCEPTIONS
      NOT_CONNECTED   = 1
      OTHERS          = 2.
IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'FTP_COMMAND'
    EXPORTING
      HANDLE        = HDL
      COMMAND       = 'set passive on'
    TABLES
      DATA          = RESULT
    EXCEPTIONS
      TCPIP_ERROR   = 1
      COMMAND_ERROR = 2
      DATA_ERROR    = 3.
CALL FUNCTION 'FTP_R3_TO_SERVER'
    EXPORTING
      HANDLE         = HDL
      FNAME          = G_FCNAME
      CHARACTER_MODE = 'X'
    TABLES
      TEXT           = T_FILE1
    EXCEPTIONS
      TCPIP_ERROR    = 1
      COMMAND_ERROR = 2
      DATA_ERROR     = 3
      OTHERS         = 4.
IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'FTP_R3_TO_SERVER'
    EXPORTING
      HANDLE         = HDL
      FNAME          = G_FCNAME1
      CHARACTER_MODE = 'X'
    TABLES
      TEXT           = T_FILE2
    EXCEPTIONS
      TCPIP_ERROR    = 1
      COMMAND_ERROR = 2
      DATA_ERROR     = 3
      OTHERS         = 4.
IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'FTP_DISCONNECT'
    EXPORTING
      HANDLE = HDL.
CALL FUNCTION 'RFC_CONNECTION_CLOSE'
      EXPORTING
        DESTINATION          = P_DEST
      EXCEPTIONS
        DESTINATION_NOT_OPEN = 1
        OTHERS               = 2.
    IF SY-SUBRC <> 0.
      MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
ENDFORM.                    " FTPCON
Hope it helps.....

How to copy file to another server from database using FTP in oracle

How to copy file to another server from database using FTP in oracle.
Please do the needfaul.

Billy Verreynne wrote:
BluShadow wrote:
Not to mention that some FTP servers can return more than one return message per operation whereas others may return one message for the same operation.I had the problem using the LIST command to determine if a file exists on the server. Cannot be determined via the FTP server's return code. Which means parsing and checking the text response from the server to the command. And this vary from server to server.
But the basics were quite easy to code. The entire package is 500 lines, includes comments and blank lines for formatting, and supports the basic FTP client command set. Not really a complex piece of software to write - but I found that many developers seem to think that writing network socket software is complex. Not really the case...Mine's a big larger, but incorporates functionality similar to what Chris provided in his, such as being able to use SQL to query a remote file using pipelined functions, or functionality to write the results of a query directly to a remove file.
:)

File format while sending a file using FTP Process

Hi,
I am facing a formatting problem when i send a file from SAP application server to a different sever using FTP process.
The problem is like this:
Lets say I have a file with 10 records on the application server. When i am downloading this file to a pc, the file is showing 10 lines.
But when i open the same file on the other server it is showing 10 records as 1 line.
The file i am sending is a text file.(ex: acc_payable.txt)
If i open the same file on the other server using word pad it is showing 10 records in 10 different lines.
I want the file to be opened using notepad and want to see the each record in a different line
Can anybody help me on this issue
Regards,
Radhakrishna

Another stab at "simplest": can you avoid embedding
newline characters in the strings
your write and reply on PrintWriter's
println() methods instead?But, if I understand the OP, this will cause the same problem. He is running on Unix but wants to generate a DOS type eol. The println() method will use the OS default; therefore, he needs to explicitly specify the DOS eol.

Transfer a xml file from application server to another server using FTP

Hi experts,
I am stuck in this situtaion.
My interface generates a xml file on an application server.
Now i need to read the xml file generated and transfer it to another system using FTP.
I can use READ DATASET to read the file from the application server.
And use the below function modules to transfer it to another system
     HTTP_SCRAMBLE.
     FTP_CONNECT
     CONCATENATE 'put' src_file_dest into variable.
     FTP_COMMAND with command = variable.
     FTP_DISCONNECT.
Now my question is:
   - Is it correct????
   - I am getting an cerror = 3 while using FTP_CONNECT. is it an authorization issue???
     if yes, what is the issue???
   - How to connect the file read from READ DATASET to the FTP Function Modules ????
Thanks and Regards
Gaurav Raghav

Try the following set of FTP commands..
This code gets the file (NOT the content) from the server and sends it to the FTP.
*********start send file to FTP********************
* FTP commands : 1. ascii
*       2. cd
*       3. lcd
*       4. put
call function 'HTTP_SCRAMBLE'
    exporting
      source      = x_pwd
      sourcelen   = dstlen
      key         = key
    importing
      destination = destin.
clear pass.
pass = destin.
call function 'FTP_CONNECT'
       exporting
            user            = x_user
*            PASSWORD       = X_PWD
            password        = pass
            host            = x_host
            rfc_destination = x_dest
       importing
            handle          = hdl.
* COMMAND ascii -->
refresh : x_result.
call function 'FTP_COMMAND'
    exporting
      handle        = hdl
      command       = cmd_ascii
      compress      = compress
    tables
      data          = x_result
    exceptions
      command_error = 1
      tcpip_error   = 2.
*command cd SAP\ -->
split x_file at '\' into dummy ftp_file.
concatenate x_cmd1 dummy into dummy2 separated by space.
concatenate dummy2 '\' into cmd_cd.
refresh : x_result.
call function 'FTP_COMMAND'
    exporting
      handle        = hdl
      command       = cmd_cd
      compress      = compress
    tables
      data          = x_result
    exceptions
      command_error = 1
      tcpip_error   = 2.
constants: winslash(1)   value '\',
            unixslash(1) value '/'.
call 'C_SAPGPARAM' id 'NAME' field 'DIR_HOME'
                     id 'VALUE' field tempdir.
* command lcd SERVER\usr\....\DIR_HOME --?
concatenate 'lcd' tempdir into cmd_lcd separated by space.
refresh : x_result.
call function 'FTP_COMMAND'
    exporting
      handle        = hdl
      command       = cmd_lcd
      compress      = compress
    tables
      data          = x_result
    exceptions
      command_error = 1
      tcpip_error   = 2.
* COMMAND put file -->
concatenate 'put' ftp_file into cmd_put separated by space.
refresh : x_result.
call function 'FTP_COMMAND'
    exporting
      handle        = hdl
      command       = cmd_put
      compress      = compress
    tables
      data          = x_result
    exceptions
      command_error = 1
      tcpip_error   = 2.
* command ls -->
refresh : x_result.
call function 'FTP_COMMAND'
    exporting
      handle        = hdl
      command       = cmd2
      compress      = compress
    tables
      data          = x_result
    exceptions
      command_error = 1
      tcpip_error   = 2.
call function 'FTP_DISCONNECT'
    exporting
      handle = hdl.
******* end send file to FTP*****
Edited by: Iria Koutsogianni on Jan 19, 2009 11:50 AM

Re: Problem with transferring of data to non sap by using FTP funtion modul

Hi all,
         I am doing program of creating excise invoice details and those are transfering to non sap.and I am successfully passing text file to that non sap by using FTP connection.
like FTP_CONNECT
FTP_COMMAND
FTP_R3_TO_CLIENT
FTP_DISCONNECT
But text file details are coming like this
means even line items are all displaying in one row.means continously all line items are coming just like this.
0001000264,070914,,,1000,Steel (pune) Plant,
Retail Outlet 1,0001000265,070914,,,1000,Steel (hyderabad) Plant,Retail Outlet 1
Actually here problem is text file data is continously coming with ','
means actually those values has to come as
         0001000264,070914,,,1000,ESSAR Steel (Hazira) Plant,Retail Outlet 1
        0001000264,070914,,,1000,ESSAR Steel (Hazira) Plant,Retail Outlet 1
How to split those records when sending the text file.
This is very big issue.I am unable to complete this issue.
Please if any one knows the solution please guide me.
please help me.
Thanks & Regards,
J.Goud

Hi all,
         I am doing program of creating excise invoice details and those are transfering to non sap.and I am successfully passing text file to that non sap by using FTP connection.
like FTP_CONNECT
FTP_COMMAND
FTP_R3_TO_CLIENT
FTP_DISCONNECT
But text file details are coming like this
means even line items are all displaying in one row.means continously all line items are coming just like this.
0001000264,070914,,,1000,Steel (pune) Plant,
Retail Outlet 1,0001000265,070914,,,1000,Steel (hyderabad) Plant,Retail Outlet 1
Actually here problem is text file data is continously coming with ','
means actually those values has to come as
         0001000264,070914,,,1000,ESSAR Steel (Hazira) Plant,Retail Outlet 1
        0001000264,070914,,,1000,ESSAR Steel (Hazira) Plant,Retail Outlet 1
How to split those records when sending the text file.
This is very big issue.I am unable to complete this issue.
Please if any one knows the solution please guide me.
please help me.
Thanks & Regards,
J.Goud

Problem with transferring of data to non sap by using FTP funtion modul

Hi all,
         I am doing program of creating excise invoice details and those are transfering to non sap.and I am successfully passing text file to that non sap by using FTP connection.
like FTP_CONNECT
FTP_COMMAND
FTP_R3_TO_CLIENT
FTP_DISCONNECT
But text file details are coming like this
means even line items are all displaying in one row.means continously all line items are coming just like this.
0001000264,070914,,,1000,Steel (pune) Plant,
Retail Outlet 1,0001000265,070914,,,1000,Steel (hyderabad) Plant,Retail Outlet 1
Actually here problem is text file data is continously coming with ','
means actually those values has to come as
         0001000264,070914,,,1000,ESSAR Steel (Hazira) Plant,Retail Outlet 1
        0001000264,070914,,,1000,ESSAR Steel (Hazira) Plant,Retail Outlet 1
How to split those records when sending the text file.
This is very big issue.I am unable to complete this issue.
Please if any one knows the solution please guide me.
please help me.
Thanks & Regards,
J.Goud

Hi,
     Thanks for reply.
Hi all,
            My problem was solved.But I have used GUI_DOWNLOAD.
    But i want to place the file name with increasing order number.
Just like suppose 1st i am placing file name as PO000051.txt
next time the file name has to be placed with increasing order like PO000052.txt
I am generating the number in my program actually i am using like this.If i keep file name as
190.0.18.65\qdls\ITGSAP_P\PO000052.txt means only it will place only that file how to increment that number. i am not getting.
If i am keeping
190.0.18.65\qdls\ITGSAP_P\g_file   like this means file is not placing.
pls help me if any one knows solution.
CALL FUNCTION 'GUI_DOWNLOAD'
       EXPORTING
          BIN_FILESIZE        = ' '
          CODEPAGE            = ' '
            FILENAME            = '
190.0.18.65\qdls\ITGSAP_P\g_file'
          FILETYPE            = ' '
          MODE                = ' '
          WK1_N_FORMAT        = ' '
          WK1_N_SIZE          = ' '
          WK1_T_FORMAT        = ' '
          WK1_T_SIZE          = ' '
          COL_SELECT          = ' '
          COL_SELECTMASK      = ' '
      importing
           filelength          =
       TABLES
            DATA_TAB            = ist_file
          FIELDNAMES          =
       EXCEPTIONS
            FILE_OPEN_ERROR     = 1
            FILE_WRITE_ERROR    = 2
            INVALID_FILESIZE    = 3
            INVALID_TABLE_WIDTH = 4
            INVALID_TYPE        = 5
            NO_BATCH            = 6
            UNKNOWN_ERROR       = 7
            OTHERS              = 8.
Regards,
j.Goud

Transfer files using FTP from one r/3 server to another on windows platform

Hi ,
I am trying to transfer a text file from one r/3 server to another
this should be done using ftp.
I am working on widows OS & i have tried all the RSFTP* pgm's none satisfy my req. please tell proper method to do so or if any pgm please tell properly.
Regards,
Prateek Kumar

If you haven't figured the migration out already, you may want to check out this thread:
http://discussions.info.apple.com/thread.jspa?threadID=2205892
It looks like the path to take from everything I'm seeing, but if you've found a friendlier solution I'd be happy to give it a shot!

Problem in Receiver side File Adapter using FTPS mode

Hello,
Here I am facing some problem in receiver side while using FTPS mode in the channel configuration.
The error message which i could see in the audit log is,
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Error when getting an FTP connection from connection pool: com.sap.aii.af.service.util.concurrent.ResourcePoolException: Unable to create new pooled resource: java.lang.NullPointerException
Can anyone help me out in solving this issue ASAP?
I am using Per file transfer mode ni the reciever channel.
Thanks in advance,
Yours
Soorya

HI Surya,
First check wether server started or not and then check you are connecting to FTP server by
go to run -> cmd and write ping and ipaddress which is used and see whether u r getting reponse from teh FTP server.
Try to login to the ftp server which you have mentioned in CC using the user name and pwd, to chk whether you have the permissions to login to the server.
Also the check whether the folder you are trying to access is having permission for delete/read/write.
Restart the FTP server and try it again.
Regards
Sridhar Goli

How to Create a Flat File using FTP/File Adapter

Can any body done workaround on creating the Flat file using FTP/File Adapter?.
I need to create a simple FlatFile either using of delimiter/Fixed length. using the above said adapters we can create XML file, i tried concatinating all the values into a single String and writing into a file, but it does not have proper structure
Can any body help me out on this..
Thanks
Ram

You can create a text schema while creating a File Adapter. If schema is specified for File Adapter, it takes care of converting XML into fixed length or delimited format.
Thanks,
-Ng.

File2file using FTP

Similar Messages

Maybe you are looking for