FileContent Conversion Error...
Hi,
In a File to File scenario, I need to drop the flat file in the FTP server, Here when the data is not populated an empty structure will be created in such cases i need not drop an empty file in the FTP server.
so i have used Empty message handling in the processing tab of File adapter-- I have set the option to Ignore.
In the FCC, i dont require any field seperator.
My Structure is:
Header:
Field1 - Length 5 of type string
Field2 - Length 5 of type string
Field3 - Length 5 of type string
Field4 - Length 5 of type string
Output should look like:
ValueofField1ValueofField2ValueofField3ValueofField4
ForEg:
Header:
Field1 -- aa
Field2 -- bb
Field3 -- cc
Field4 -- dd
Output should look like:
aabbccdd
The FileContent converison which i used in my receiver File Adapter as follows:
Header.fieldFixedLengths --5,5,5,5
Header.fixedLengthTooShortHandling Ignore
Header.endSeparator 'nl'
so while i run the scenario during the contents with payload the file is getting generated successfully during handling empty files i am getting the blank file at the output directory. so can anyone suggest how to suppress this blank file
Thanks,
-- Sai
Hi,
i cannot change the output occurence reason being when i change the occurence in message mapping using signature tab the structure is getting chagned but i need to ignore the blank file.
can u suggest some thing which ignores the empty file.. actually when i see the empty file size i found it with some 150 bytes, i think the spaces are getting populated in the empty file
so how could such files should be ignored.
Thanks,
--sai
Similar Messages
-
Open PO LSMW Quantity conversion error in net price calculation
Hi gurus,
I encountered an error as I was tring to upload purchase orders - "Quantity conversion error in net price calculation". What does this mean and how do I fix this?
Please help
ThanksHi Jürgen,
Where in the Material Master can I find the conversion ratio between both units?
Also, I am trying to upload POs for Spare Parts and that's when I get the error. But when I try to use other materials like FGs, everything is ok. I can proceed with the upload without any problem
Please help -
How to custom a conversion error in JSF page in JDeveloper
According to the book "Core JavaServer Faces" p213 (fifth edition), if I add the following line to messages.properties file, and specifiy it in the faces-config.xml and .jsp file, then the displayed conversion error message should be my tailored one instead of the default. However, I still get the default error message. Besides, I didn't find "CONVERSION" variable in UIInput class. Is the book wrong? And what's the correct way?
javax.faces.component.UIInput.CONVERSION=Please correct your inputI didn't choose any special in JDeveloper IDE. I just selected "new" to create a file called "message.properties" and put the line there. I didn't specify converters excepts declaring the type in the Jave Beans. I guess the converting is done by the JSF framework automatically. It must be a JSF converter since I created the page as a JSF page.
-
What does the "conversion error" I get when converting a pdf file to Microsoft word?
What is the "conversion error" I get when converfting a pdf file to aMicrosoft word?
Adobe reader with export to PDF
Sent from my iPhone 5
Marty Kennedy -
Error while impdp: ORA-02374: conversion error loading table
Hi,
I am trying to convert the character set from WE8ISO8859P1 to AL32UTF8 using expdp/impdp. for this I first convert WE8ISO8859P1 to WE8MSWIN1252 in source DB to get rid of “lossy” data. I created new database(target) with character set AL32UTF8 and nls_length_semantics = ’CHAR’ and created all the tablespaces as in source DB with auoexend on. I took full export (expdp) of source DB excluding TABLESPACE,STATISTICS,INDEX,CONSTRAINT,REF_CONSTRAINT and imported using impdp to target DB. I found below error in the import log file:
ORA-02374: conversion error loading table "SCTCVT"."SPRADDR_CVT"
ORA-26093: input data column size (44) exceeds the maximum input size (40)
ORA-02372: data for row: CONVERT_STREET_LINE1 : 0X'20202020202020202020202020202020202020202020202020'
I checked with select query on both DBs with below results.
source DB:
04:58:42 SQL> select count(*) from "SCTCVT"."SPRADDR_CVT";
COUNT(*)
74553
target DB:
04:59:24 SQL> select count(*) from "SCTCVT"."SPRADDR_CVT";
COUNT(*)
74552
please suggest me a solution to this.
Thanks and Regards.
Edited by: user12045167 on May 9, 2011 10:39 PMThanks for your update maher.
09:15:53 SQL> desc "SCTCVT"."SPRADDR_CVT"
Name Null? Type
SPRADDR_PIDM NUMBER(8)
CONVERT_PIDM VARCHAR2(9 CHAR)
SPRADDR_ATYP_CODE VARCHAR2(2 CHAR)
CONVERT_ATYP_CODE VARCHAR2(2 CHAR)
SPRADDR_SEQNO NUMBER(2)
CONVERT_SEQNO VARCHAR2(2 CHAR)
SPRADDR_FROM_DATE DATE
CONVERT_FROM_DATE VARCHAR2(8 CHAR)
SPRADDR_TO_DATE DATE
CONVERT_TO_DATE VARCHAR2(8 CHAR)
SPRADDR_STREET_LINE1 VARCHAR2(30 CHAR)
CONVERT_STREET_LINE1 VARCHAR2(40 CHAR)
SPRADDR_STREET_LINE2 VARCHAR2(30 CHAR)
CONVERT_STREET_LINE2 VARCHAR2(40 CHAR)
SPRADDR_STREET_LINE3 VARCHAR2(30 CHAR)
CONVERT_STREET_LINE3 VARCHAR2(40 CHAR)
SPRADDR_CITY VARCHAR2(20 CHAR)
CONVERT_CITY VARCHAR2(25 CHAR)
SPRADDR_STAT_CODE VARCHAR2(3 CHAR)
CONVERT_STAT_CODE VARCHAR2(25 CHAR)
SPRADDR_ZIP VARCHAR2(10 CHAR)
CONVERT_ZIP VARCHAR2(15 CHAR)
SPRADDR_CNTY_CODE VARCHAR2(5 CHAR)
CONVERT_CNTY_CODE VARCHAR2(5 CHAR)
SPRADDR_NATN_CODE VARCHAR2(5 CHAR)
CONVERT_NATN_CODE VARCHAR2(5 CHAR)
SPRADDR_PHONE_AREA VARCHAR2(3 CHAR)
CONVERT_PHONE_AREA VARCHAR2(3 CHAR)
SPRADDR_PHONE_NUMBER VARCHAR2(7 CHAR)
CONVERT_PHONE_NUMBER VARCHAR2(7 CHAR)
SPRADDR_PHONE_EXT VARCHAR2(4 CHAR)
CONVERT_PHONE_EXT VARCHAR2(4 CHAR)
SPRADDR_STATUS_IND VARCHAR2(1 CHAR)
CONVERT_STATUS_IND VARCHAR2(1 CHAR)
SPRADDR_ACTIVITY_DATE DATE
CONVERT_ACTIVITY_DATE VARCHAR2(8 CHAR)
SPRADDR_USER VARCHAR2(30 CHAR)
CONVERT_USER VARCHAR2(30 CHAR)
SPRADDR_ASRC_CODE VARCHAR2(4 CHAR)
CONVERT_ASRC_CODE VARCHAR2(4 CHAR)
SPRADDR_DELIVERY_POINT NUMBER(2)
CONVERT_DELIVERY_POINT VARCHAR2(2 CHAR)
SPRADDR_CORRECTION_DIGIT NUMBER(1)
CONVERT_CORRECTION_DIGIT VARCHAR2(1 CHAR)
SPRADDR_CARRIER_ROUTE VARCHAR2(4 CHAR)
CONVERT_CARRIER_ROUTE VARCHAR2(4 CHAR)
SPRADDR_GST_TAX_ID VARCHAR2(15 CHAR)
CONVERT_GST_TAX_ID VARCHAR2(15 CHAR)
SPRADDR_REVIEWED_IND VARCHAR2(1 CHAR)
CONVERT_REVIEWED_IND VARCHAR2(1 CHAR)
SPRADDR_REVIEWED_USER VARCHAR2(30 CHAR)
CONVERT_REVIEWED_USER VARCHAR2(30 CHAR)
SPRADDR_DATA_ORIGIN VARCHAR2(30 CHAR)
CONVERT_DATA_ORIGIN VARCHAR2(30 CHAR)
SPRADDR_CVT_RECORD_ID NUMBER(8)
SPRADDR_CVT_STATUS VARCHAR2(1 CHAR)
SPRADDR_CVT_JOB_ID NUMBER(8)
so here we can see its value is 40 (CONVERT_STREET_LINE1 VARCHAR2(40 CHAR)).
shall i go ahead altering the column? -
ME21N--Quantity conversion error in net price calculation
Hi MM experts,
Issue: while creating PO, when attempting to add the net price for line item. but system removes the cost and gives the follow error message says "Quantity conversion error in net price calculation".
The system was not able to convert the order unit into the purchase order price unit. Possible reasons:
i) the conversion results in a net price that is too high, or
ii) the conversion factor for the units has not been properly maintained.
iii) Check whether the units of measure and their conversion factor are correct.
I have checked material master>unit of measure> 1 PL = 22 KG maintained.
Can you please tell me how to resolve this issue?
Appreciated early response.
Thanks in advance.
SureshHi Suresh,
Please check on Material Master Data - Accounting 1 tab - Price Unit
Moshe -
Quantity Conversion Error in Net Price Calculation
We are currently using SRM 5.0 ECS where we created a material PO and had a problem with the product not having the language E maintain in the material master. This caused the PO to have status of "error in process" Once we fixed this issue and tried to reprocess the PO we're not getting the following error message in the Application Monitor:
No Instance of Object type PurchaseOrder has been created. External Reference
Puchase Order still contains faulty Items
Quantity Conversion Error in Net Price Calculation
Has anyone seen this or know what we can do to resolve this so that the PO gets replicated in R3?
Thanks in advance.Hi Robert,
Regarding this backend error E 212 06 Quantity conversion error in net
price calculation.
This error is because in the PO Order price unit is empty. And
quantity is null. So, please enter the quantity and order price unit
for this PO and order the PO again. Or you can retransfer the
PO manually using the FM BBP_PD_PO_TRANSFER_EXEC. (for this fm you need
to input the PO header guid, which you will get it from tx.BBP_PD
by providing PO number and object type as BUS2201).
This has worked for other customers.
Hope this helps,
Kind Regards,
Matthew -
Quantity conversion error in net price calculation in BAPI_PO_CREATE1
I'm creating PO from BAPI_PO_CREATE1 .here i'm getting follwing error
quantity conversion error in net price calculation.
plz guide me to remove it.Are you using quantities directly entered by the user while calling the function to do the net price calculation? If that is the case, you should use FM CONVERSION_EXIT_ALPHA_INPUT to convert the quantity from the external format into the internal one!
Another possibility is that some customizing is missing for converting quantities in different unit of measures (like the quantity in pieces is known, but the pricing calculation is being done on kilos.. but the convertion between these 2 unit of measures is missing).
Good luck! -
Sender file adapter conversion Error!!
Hello every one....
I am stuck with a problem...in my scenario,, there are possiblities that file may contain more than required paramters... in such case,,, paramters defined in conversion should go ahead and others should be ignored...
for this very purpose i added the paramter:
row.fieldSeparator ,
row.fieldNames orderno,authcode,status
row.endSeparator 'nl'
row.additionalLastFields ignore
the scenario works fine if the file contains thrree comma separated values but it raises an error if no of paramters increase as :
Conversion of file content to XML failed at position 0: java.lang.Exception: ERROR converting
document line no. 1 according to structure 'row':java.lang.Exception: ERROR in configuration: more
elements in file csv structure than field names specified!
we are using PI 7.... does it require some more configuration in additoin to paramter row.additionalLastFields
any help in this regard would be highly appreciated...
thanxthis parameter is already set, and this is the exact behavior i want from adapter engine... but the problem
here is different... the exception is raised at communication channel's conversion routine level,,, the retry
interval is not the one defined in visual admin but infact the interval (polling) time defined in communication
channel.... the system does'nt stop after 3 attempts,, but infact keep on trying to read it....
one peice of information i have found is in sap note:821267 , which states:
*Q35:*
Q: I have configured a File Sender channel with File Content
Conversion or a custom-developed module, which may throw an
exception. When the File Adapter encounters an invalid file, which
triggers a conversion error or an exception in a module, the
adapter will enter a retry interval and upon each following
processing attempt try to process the faulty file. This basically
prevents the File Adapter from picking up files that are located
after the fauilty file according to the configured sort order. How
can I change this behavior?
o A: This is by design. When the File Adapter encounters an invalid
file, manually remove this file from the configured source
directory. You can configure an alerting rule to get notified each
time this occurs.
We are currently evaluating possible solutions that could be used
to skip this manual interaction.
now can there be a way around to make communication channel read the file only 3 times (value defined in adapter engine profile in visual admin)
I have thaught of writing of module.... but the error is raised even before calling module !!
any further clue ??? -
Error " conversion error between two character sets" in PI MONI
Hi Experts
I am doing file to Idoc scenario. I am getting the following error in PI MONI "conversion error between two character sets".
please suggest me how to solve the issue.
thanx in advance.Hi Mickael
Below is the complete error message found in PI MONI.
SAP:Error SOAP:mustUnderstand="1" xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">SYSTEM_DUMP</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>PI Server : XBTO80__0000 : Conversion error between two character sets.</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error> -
Runtime error in J2IUN - "DYNPRO_FIELD_CONVERSION" / "Conversion Error*"
Hi All,
I am facing run time error problem during Transaction J2IUN "DYNPRO_FIELD_CONVERSION" / "Conversion Error"
Error analysis:
The program has been interrupted and cannot resume.
Program "J_1IRUTZN" attempted to display fields on screen 9000.
An error occurred during the conversion of this data.
There was a conversion error in the output of fields to the screen.
The formats of the ABAP output field and the screen field may not match.
Some field types require more space on the screen than in the ABAP
program. For example, a date output field on the screen requires two
more characters than the corresponding field in the ABAP program. When
the date is displayed on the screen, an error occurs resulting in this
error message.
Screen name.............. "J_1IRUTZN"
Screen number............ 9000
Screen field............. "UTIL1-REM_BAL"
Error text............... "FX015: Sign lost."
Other data:
Kindly guide me to resolve the issue.
Regards,
P.S.ChitraHi,
Here comes the solution...
Please implemet the SAP note 1252418...
Looking very much relavent to your problem...
Regs,
Lokesh. -
Arithmetical errors or conversion errors found in routine ROUTINE_0011
Hi,
I am having a problem when trying to load a cube from an DSO. In the PSA 90 record appears with the error "Arithmetical errors or conversion errors found in routine ROUTINE_0011 record XXX"
I simulated and debbug the load and this routine have the code:
RESULT = ( COMM_STRUCTURE-/bic/zom_icoci
/ COMM_STRUCTURE-/bic/zom_icnrv ) * c_hundred.
I know that the field COMM_STRUCTURE-/bic/zom_icnrv can come with value zero and return me the msg error but I saw that none of the 90 fields are zero (value <> 0) in the DSO. And besides there are others records equals to the records with error that not generate the arithmetical error.
Could you help me to solve this problem?
Regards,Hi,
Check if the c_hundred variable has same type as that of two keyfigures used in the formula.
Regards
Akhan -
** File Content Conversion Error in Receiver CC - How to solve this?
Hi friends,
My target structure looks like below.
EmployeeJobDetails --> Message Type
JobCode --> Node
EmployeeNumber xsd:string
Domain xsd:string
JobTrack --> Node
Department xsd: string
Position xsd: string
I use the FCC parameters in the receiver CC as below:
Recordset Structure: JobCode,JobTrack
JobCode.fieldSeparator = |
JobCode.endSeparator = 'nl'
JobTrack.fieldSeparator = |
JobTrack.endSepartor = 'nl'.
Because, we want the output like below
1099|Raja
Accts|JuniorAccountant
1100|Ram
HR|Recruiter
like this.
In this scenario Source is XML and target is txt file.
I am using XSLT Mapping. The FCC works fine, if my source input file contains some records. But, when we send empty source XML file as below
<?xml version="1.0" encoding="UTF-8"?>
<EMPLOYEE_DATA/>
Mapping works fine. Message is processed successfully in SXMB_MONI. The payload in response also comes with Message Type name like below
<EmployeeJobDetails namespace >
</EmployeeJobDetails>
While convert this, the system throws below error.
Error Message:
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'Conversion configuration error: Unknown structure '' found in document', probably configuration error in file adapter (XML parser error)': java.lang.Exception: Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'Conversion configuration error: Unknown structure '' found in document', probably configuration error in file adapter (XML parser error)'
Friend, how to convert this when source XML is empty.
But, if we remove JobTrack node in target strucutre and remove the JobTrack parameters in CC, then if we send the same empty XML file FCC is working fine and we get the target text file 0 KB. (Amazing !!)
But, in the first case, how to solve the issue?
Kind Regards,
Jegathees P.Hi friends,
If we remove JobTrack node in target strucutre and remove the JobTrack parameters in CC, then if we send the <b>same empty XML file</b> FCC is working fine and<b> we get the target text file 0 KB</b>. (Amazing !!)
But, if we give parameters like JobCode,JobTrack then send pass the same empty file, we face the problem 'File Content Conversion' Error.
Searching solution for this problem ... -
Hi all,
We are getting the following error when trying to parse an xml string resource - Character conversion error: "Illegal ASCII character, 0xc2" (line number may
be too low)-. We have not been able to get around this. We have tried creating the InputSource two different ways:
reader = new StringReader(stringSource);
src = new InputSource( reader );
and
src = new InputSource(new InputStreamReader(new ByteArrayInputStream(stringSource.getBytes())));
The problem does appear to go away if we treat the DTD we are validating against as a file. If we set it has a uri, we get the above problem.
Is anyone else experiencing this problem?
Any help would be greatly appreciated.
Thanks in advance,
GregHi,
2 possible solutions:
1) try using the xerces parser instead of sun's parser
2) look at the posting at the following url and see wether the posted solution solves your problem: http://forums.java.sun.com/thread.jsp?forum=34&thread=67558
Hope this helps,
Kurt. -
"character conversion error" while parsing xml files
Hello,
I'm trying to parse MusicXML (Recordare) files, but I'm getting an exception.
I'm using the SAX parser (javax.xml.parsers.SAXParser).
Here is the code I use to instantiate it:
final javax.xml.parsers.SAXParserFactory saxParserFactory = javax.xml.parsers.SAXParserFactory.newInstance();
final javax.xml.parsers.SAXParser saxParser = saxParserFactory.newSAXParser();
final org.xml.sax.XMLReader parser = saxParser.getXMLReader();
I'm using my own handler, but I get the same exception even if I use org.xml.sax.helpers.DefaultHandler.
The error I get is:
Character conversion error: "Illegal ASCII character, 0xc2" (line number may be too low).
The first few lines of my xml files look like this:
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
<!DOCTYPE score-partwise
PUBLIC "-//Recordare//DTD MusicXML 0.6 Partwise//EN"
"http://www.musicxml.org/dtds/partwise.dtd">
<score-partwise>
[...etc...]
If I delete the <!DOCTYPE ...> line, then I don't get the exception anymore. But the MusicXML files I get (from some other program) always contain this line, and it would be quite some work to delete them from every file manually.
So does anyone know if there is a way to avoid deleting that line in every file, while still being able to parse the xml files without exceptions?
Or maybe does anyone know what the exact cause of the exception is? (because I don't know what exactly causes it)
Thank you in advance.
Greetz,
JipoSo does anyone know if there is a way to avoid
deleting that line in every file, while still being
able to parse the xml files without exceptions?ok this is side-stepping the real problem but I've used this code to filterout DTD references for other reasons public static InputStream filterOutDTDRef(InputStream in) throws IOException {
BufferedReader iniReader = new BufferedReader(new InputStreamReader(in));
StringBuffer newXML = new StringBuffer();
for(String line = iniReader.readLine(); line!=null; line = iniReader.readLine())
newXML.append(line+"\n");
in.close();
int s = newXML.indexOf("<!DOCTYPE ");
if(s!=-1)
newXML.replace(s,newXML.indexOf(">",s)+1,"");
return new ByteArrayInputStream(newXML.toString().getBytes());
}and it actually speeds up the parsing phase too (since the DTD ref.s were on the web and the XML standard mandates that there is a fetch for each xml file parsed..)
you can feed the above into the InputSource constructor that takes an InputStream argument.
Now for the real problem... 0xc2 is "LATIN CAPITAL LETTER A WITH CIRCUMFLEX" according to a unicode chart - which is not an ASCII character (as the error message correctly reports). I'm not sure why the file is being parsed as ASCII though? You could try parsing in a FileReader to the inputsource and hope it picks up the default character encoding of your system, and that that character encoding matches the file. Or you could try passing in a FileReader constructed with a explicit character encoding (eg "UTF8") and see if that does the trick?
asjf
Maybe you are looking for
-
Need help removing a bunch of objects added at runtime via a timer
Hi. After adding an image to the stage, turning it into a Movie clip, and setting linkage in library to Export for Actionscript, I'm now using a timer to add a bunch of roses to the stage as a video plays. How can I get rid of all these clips once t
-
Magic Mouse scrolling lacks "rolling feature" for fast finger swipe
I recently purchased a Magic Mouse for my iMac (27" 2.8 GHz Intel Core 2 Duo with Leopard 10.5.8 OS). I've noticed that the scrolling does not have one of the features shown in the System Profile settings for the mouse scrolling. When I move my finge
-
Buttons and text items on oracle forms 6i
can i create dynamic buttons and text fields on oracle forms 6i. i mean when i insert record in database then automatically creat a button on form. Regards Munawer hussain
-
ORA-00333: redo log read error block 69855 count 8192
Hello Guys, where importing a dump to newly created database 10gR2 on Linux i got this error: ORA-00333: redo log read error block 69855 count 8192 By searching this error, i found that I need to do recovery, but i don't have any backup of this datab
-
i have no clue what to do, i'm thinking i just totally got screwed over with these products again. but i waited so long for this album and not i cant get it. so i'm a little angry. i just would really like to know if i could do anything.. at all. and