Files corrupting

Itunes seems to be corrupting certain files in my music folder.
All my files are aiff-c & the ones that Itunes will no longer play looklike they have almost doubled in file size (say if they were originally 40mb, they are now 70mb).
There seems to be no rhyme or reason to which files it chooses to do this to, & at the moment it is only 5 or 6.. but i am afraid it will spread.
ANYONE?
(im on itunes 10.3.1 & OS 10.6.7)

Further to the above:  I have now found that the same corruption happens when I email attachments and FTP from my PC laptop, so this rules out a computer issue.  I have also swapped wireless routers and exactly the same problem.  As mentioned above, I don't get the corruption when using another internet connection.
Also, I have an iPhone which I've restored to factory default settings and when I take a photo with the phone and email it (using my home wireless network), the file corrupts, everytime.
Using services such as YouSendIt and WeTransfer, gives the same problems!
I'm desperate for help on this one and I'd even pay someone to resolve it!

Similar Messages

  • Is there a cure for persistent file corruptions across the suite?

    i am having terrible and consistent problems with file corruptions across the suite. for example…
    1: i collected for output (indesign) – corrupted over 100 small images that were linked.
    2: opened an indesign job and all linked files failed to update and could not be imported (simply would not import those files and were all corrupted).
    3: had a hang in photoshop followed by a 150:30 error (would not open any of my applications). this prompted a clean install of system and adobe cs4 see below
    4: most recently, had a hang in photoshop (photoshop will also no "force quit") whilst indesign was open. two of my image files corrupted and, most surprisingly, all my illustrator files that i had placed also corrupted (will not even open in illustrator any more). illustrator was not even running at the time, so, get this – a hang in photoshop destroys illustrator files simply because they are placed in indesign.
    this last event has made me more certain than ever that there is a fundamental problem at the cs4 core.
    can anyone help?
    please note the following:
    i am running a macintosh imac, 2.66 GHz Intel Core 2 Duo (latest imac), with 4 GB 1067 MHz DDR3 ram.
    before this last disaster, i had reloaded the system software (archive and install), and updated it all the way to version 10.5.8
    i then uninstalled the creative suite, ran the cleanscript from adobe, reloaded the creative suite, downloaded all the cs4 updates
    (so, latest mac, latest system, latest cs4 – all clean installs).
    is there something i can do? or is this just a very unstable and disappointing upgrade – i have had nothing but problems from day one!
    many thanks if anyone has any advice.

    Re: 150:30 error:
    Please try this KB article's solutions, and report back on how it went for you. If you can provide details about any recent OS updates, backups, or migrations, that would help is nail down the root cause of the new rash of this error for Mac users recently:
    http://kb2.adobe.com/cps/512/cpsid_51260.html

  • Downlaoded .exe for Firefox5 gives "file corrupted" error when I try to open it

    I am running Windows XP on Parallels 5 on top of MAC OSX on an iMac24.
    I have no problems downloading Firefox 5 on OSX for Mac, nor for downloading Thunderbird on WinXP/Parallels5.
    Just Firefox5.exe comes up "file corrupted" when I try to run it or open it on WinXP/Parallels5.

    Post in Microsoft's Powerpoint (Mac) message boards.

  • Sync File Corruption with 64-bit Vista/iTunes

    I'm getting some file corruption problems when trying to sync my new 16GB iPhone with the latest 64-bit iTunes (7.6.0.29). "yes I have the 64-bit version".
    The sync seems to go correctly, but I have yet to be able to play any videos all the way through. Videos purchased from iTunes as well as self encoded files. All said files were working on my 60GB iPod Video with previous versions of iTunes on the same 64-bit Vista machine.
    The videos will start playing fine, but will eventually reach a point in the file that was corrupted during transfer, the audio will drop out and the video will distort, then it exits from the video as if it reached the end of the file. No error messages or anything. If I play the file again, it will do the same thing at the exact same spot, so its a problem in the file. Now, if I remove the file and add it back, the file still has the same problem, but in a different location, which means the source is fine, but the copy to the device during the sync is the issue.
    To test, I synced the exact same content from my notebook which is 32-bit XP, and zero problems. So I'm currently just using my notebook for syncing at the moment.
    Anyone else with 64-bit Vista have a similar issue?

    Hello
    I have a couple troubleshooting steps I would like you to try. I myself do not have a 64 bit Vista so I can not test this to confirm if the same issue occurs or not.
    1. Attempt to Sync content using each of the USB Ports. See if all USB Ports pose the same issue with the video. Or if you found when where it does not occur.
    2. Test on a new user on the Vista Machine. If possible take at least one or 2 movies and copy them onto a flash drive or something. And bring them into iTunes on a new user account. You may need to Authorize that user and De-authorize when your done. Does the same issue occur?
    3. If you perform a reboot on the iPhone, Then Sync Data over. Does the same issue occur?
    4. If possible could you restore the iPhone. Then Re-sync and see if same issue occurs.
    5. Is this happening with all videos? or only certain ones? Does the corruption occur at the same time frame every time? If so is it the same time frame for all videos or slightly different?
    6. Perform an Uninstall and Reinstall of iTunes on your system, See if same issue occurs.
    Let us know how it goes.

  • Transaction log shipping restore with standby failed: log file corrupted

    Restore transaction log failed and I get this error: for only 04 no of database in same SQL server, renaming are working fine.
    Date                     
    9/10/2014 6:09:27 AM
    Log                        
    Job History (LSRestore_DATA_TPSSYS)
    Step ID                
    1
    Server                  
    DATADR
    Job Name                           
    LSRestore_DATA_TPSSYS
    Step Name                        
    Log shipping restore log job step.
    Duration                             
    00:00:03
    Sql Severity        0
    Sql Message ID 0
    Operator Emailed           
    Operator Net sent          
    Operator Paged               
    Retries Attempted         
    0
    Message
    2014-09-10 06:09:30.37  *** Error: Could not apply log backup file '\\10.227.32.27\LsSecondery\TPSSYS\TPSSYS_20140910003724.trn' to secondary database 'TPSSYS'.(Microsoft.SqlServer.Management.LogShipping) ***
    2014-09-10 06:09:30.37  *** Error: An error occurred while processing the log for database 'TPSSYS'. 
    If possible, restore from backup. If a backup is not available, it might be necessary to rebuild the log.
    An error occurred during recovery, preventing the database 'TPSSYS' (13:0) from restarting. Diagnose the recovery errors and fix them, or restore from a known good backup. If errors are not corrected or expected, contact Technical Support.
    RESTORE LOG is terminating abnormally.
    Processed 0 pages for database 'TPSSYS', file 'TPSSYS' on file 1.
    Processed 1 pages for database 'TPSSYS', file 'TPSSYS_log' on file 1.(.Net SqlClient Data Provider) ***
    2014-09-10 06:09:30.37  *** Error: Could not log history/error message.(Microsoft.SqlServer.Management.LogShipping) ***
    2014-09-10 06:09:30.37  *** Error: ExecuteNonQuery requires an open and available Connection. The connection's current state is closed.(System.Data) ***
    2014-09-10 06:09:30.37  Skipping log backup file '\\10.227.32.27\LsSecondery\TPSSYS\TPSSYS_20140910003724.trn' for secondary database 'TPSSYS' because the file could not be verified.
    2014-09-10 06:09:30.37  *** Error: Could not log history/error message.(Microsoft.SqlServer.Management.LogShipping) ***
    2014-09-10 06:09:30.37  *** Error: ExecuteNonQuery requires an open and available Connection. The connection's current state is closed.(System.Data) ***
    2014-09-10 06:09:30.37  *** Error: An error occurred restoring the database access mode.(Microsoft.SqlServer.Management.LogShipping) ***
    2014-09-10 06:09:30.37  *** Error: ExecuteScalar requires an open and available Connection. The connection's current state is closed.(System.Data) ***
    2014-09-10 06:09:30.37  *** Error: Could not log history/error message.(Microsoft.SqlServer.Management.LogShipping) ***
    2014-09-10 06:09:30.37  *** Error: ExecuteNonQuery requires an open and available Connection. The connection's current state is closed.(System.Data) ***
    2014-09-10 06:09:30.37  *** Error: An error occurred restoring the database access mode.(Microsoft.SqlServer.Management.LogShipping) ***
    2014-09-10 06:09:30.37  *** Error: ExecuteScalar requires an open and available Connection. The connection's current state is closed.(System.Data) ***
    2014-09-10 06:09:30.37  *** Error: Could not log history/error message.(Microsoft.SqlServer.Management.LogShipping) ***
    2014-09-10 06:09:30.37  *** Error: ExecuteNonQuery requires an open and available Connection. The connection's current state is closed.(System.Data) ***
    2014-09-10 06:09:30.37  Deleting old log backup files. Primary Database: 'TPSSYS'
    2014-09-10 06:09:30.37  *** Error: Could not log history/error message.(Microsoft.SqlServer.Management.LogShipping) ***
    2014-09-10 06:09:30.37  *** Error: ExecuteNonQuery requires an open and available Connection. The connection's current state is closed.(System.Data) ***
    2014-09-10 06:09:30.37  The restore operation completed with errors. Secondary ID: 'dd25135a-24dd-4642-83d2-424f29e9e04c'
    2014-09-10 06:09:30.37  *** Error: Could not log history/error message.(Microsoft.SqlServer.Management.LogShipping) ***
    2014-09-10 06:09:30.37  *** Error: ExecuteNonQuery requires an open and available Connection. The connection's current state is closed.(System.Data) ***
    2014-09-10 06:09:30.37  *** Error: Could not cleanup history.(Microsoft.SqlServer.Management.LogShipping) ***
    2014-09-10 06:09:30.37  *** Error: ExecuteNonQuery requires an open and available Connection. The connection's current state is closed.(System.Data) ***
    2014-09-10 06:09:30.38  ----- END OF TRANSACTION LOG RESTORE    
    Exit Status: 1 (Error)

    I Have restore the database to new server and check with new log shipping but its give this same error again, If it is network issue i believe issue need to occur on every database in  that server with log shipping configuration
    error :
    Message
    2014-09-12 10:50:03.18    *** Error: Could not apply log backup file 'E:\LsSecondery\EAPDAT\EAPDAT_20140912051511.trn' to secondary database 'EAPDAT'.(Microsoft.SqlServer.Management.LogShipping) ***
    2014-09-12 10:50:03.18    *** Error: An error occurred while processing the log for database 'EAPDAT'.  If possible, restore from backup. If a backup is not available, it might be necessary to rebuild the log.
    An error occurred during recovery, preventing the database 'EAPDAT' (8:0) from restarting. Diagnose the recovery errors and fix them, or restore from a known good backup. If errors are not corrected or expected, contact Technical Support.
    RESTORE LOG is terminating abnormally.
    can this happened due to data base or log file corruption, if so how can i check on that to verify the issue
    Its not necessary if the issue is with network it would happen every day IMO it basically happens when load on network is high and you transfer log file which is big in size.
    As per message database engine was not able to restore log backup and said that you must rebuild log because it did not find out log to be consistent. From here it seems log corruption.
    Is it the same log file you restored ? if that is the case since log file was corrupt it would ofcourse give error on wehatever server you restore.
    Can you try creating logshipping on new server by taking fresh full and log backup and see if you get issue there as well. I would also say you to raise case with Microsoft and let them tell what is root cause to this problem
    Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
    My Technet Articles

  • "FILE CORRUPTED" error message on N 78

    My phone is a Nokia N78 and my problem is as followed:
    Before updating the firmware from version 12 to version 20, I had google maps installed. After updating over the air, google maps (and also several other apps) got removed. When i tried to download and install google maps again and tried to install it again, it keeps saying "file corrupted". The same goes with other apps i try to download and install. But I have no trouble installing java apps.
    I am wondering if anyone knows how to solve this problem?
    Solved!
    Go to Solution.

    you are very welcome i am so glad that you got your issues sorted. i know how frustrating it can be to have a phone and potentially no 'way out'. been there and done that, that is why i joined this forum i wanted to learn more and find more answers to some questions. technology in general can be frustrating and its ever changing so we have to keep up or we will drown in frustration be well, rad.
    ps. and you are correct, i am no expert, my solution is not expert either more of a been down this road solution. i am just another user on this forum that sometimes gets the right answer
    Message Edited by radical24 on 19-Jan-2009 07:54 PM
    You know what I love about you the most, the fact that you are not me ! In love with technology and all that it can offer. Join me in discovery....

  • File corruption on SDCard when multiple files are being written from WinCE 6.0R3

    We currently have file corruption problems which we have been able to reproduce on our system which uses WinCE 6.0R3. We have an SDCard in our system which is mounted as the root FS.  When multiple files are being written to the file system we occasionally
    see file corruption with data destined from one file, ending up in another file, or in another location in the same file.  We have already written test SW that we have been able to use to reproduce the problem, and have worked with the SDCard vendor to
    check that the memory controller on the card is not the source of the problems.
    We know that the data we send to WriteFile() is correct, and that the data which eventually gets sent through the SDCard driver to the SD card is already corrupted.
    We believe that the problem is somewhere in the microsoft private sources between the high level filesystem API calls and the low level device calls that get the data onto the HW.
    We have confirmed that the cards that get corrupted are all good and this is not a case ofpoor quality flash memory in the cards. The same cards that fail under WinCE 6.0R3 never fail under the same types of testing on Windows, Mac OX, or linux.  We
    can hammer the cards with single files writes over and over, but as soon as multiple threads are writing multiple files it is only a matter of time before a corruption occurs.
    One of the big problems is that we are using the sqlcompact DB for storing some data and this DB uses a cache which get's flushed on it's own schedule. Often the DB gets corrupted because other files are being written when the DB decides to flush.
    So we can reproduce the error (with enough time), and we know that data into the windows CE stack of code is good, but it comes out to the SDcard driver corrupted.  We have tried to minimize writes to the file system, but so far we have not found a
    way to make sure only one file can be written at once. Is there a setting or an API call that we can make to force the OS into only allowing one file write at a time, or a way of seeing how the multiple files are managed in the private sources?
    Thanks
    Peter

    All QFE's have been applied we are building the image so we have some control.
    I have build an image which used the debug DLL's of the FATFS and I have enabled all of the DebugZones.  The problem is still happening. From the timings in the debug logs and the timestamps in the data which corrupts the test file I have been able
    to see that the file is corrupted AFTER the write is complete. Or at least that's how it seems.
    We finished writing the file and closed the handle. Then more data is written to other files. When we get around to verifying the file it now contains data from the files that were subsequently written.
    What I think I need to do is figure out in detail how the two files were "laid down" onto the SDCard.  If the system used the same cluster to write the 2 files then that would explain the issue.

  • H8-1520t: sfc /scannow reported file corruption in Windows 8.1

    My computer (h8-1520t) computer had had file corruption error reported by sfc /scannow.
    The corruption was rather common corruption as discovered elsewhere on the internet.  The corruption pertained to prncacla.inf and it was repaired only by using DISM.exe /Online /Cleanup-image /Restorehealth.  The corruption occured while the computer was doing automatic maintenance which locked up my system.  After forcing a shutdown and rebooting, I immediately ran sfc /scannow and that's when the corruption was first detected.
    Now sfc /scannow finds no corruption and automatic maintence runs to completion.
    Since this is a rather common corruption error and there's no explanation as to what causes the problem, should I send my computer, which it's still under warranty, back to HP ---or--- did I corrected the corruption properly ? ? ?
    On additional question: What on earth causes that common corruption to occur anyway.
    Also: UEFI diagnostics extensively run and the extensive testing revealed no problems with system board, hard drive, memory, processor (i7-3770), graphics card memory (Radeon HD 8570).
    If I should be concerned about my computer being a dud and lemon, I'd like to know... Or, did I fix the corruption correctly?
    Thanks,
    Mark

    Hi Mark,
    You may want to review this article.
    If you are not comfortable with the Windows repair process then you can use the external HP recovery media to reload you PC back to a day one factory fresh condition.  Backup your data before doing so.
    HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
    HP Photosmart Premium C309G, HP Photosmart 6520
    HP Touchpad, HP Chromebook 11
    Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
    Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
    Windows 7/8 UEFI/Legacy mode, MBR/GPT

  • File Corruption During Sync Windows 8.1

    Hi
    I have recently introduced some Windows 8.1 systems into our environment, a Sony laptop and a non branded custom build, both systems are running Windows 8.1 Pro.
    Our environment is as follows:
    Windows Server 2008 domain
    PPTP VPN for laptop users using a Watchguard X515.
    Netgear ReadyNAS 2100 for Network Folders.
    Folder redirection in place for Documents and Desktop.
    Offline files in use. Users have the ability to make shared network files available offline if required.
    The first device we had with 8.1 Pro was a Sony laptop for our Marketing Director.  He has manually made a few shared network folders available offline for when he is out of the office and unable to connect to the VPN.  
    We first noticed an issue a few weeks ago when he came to me telling me that one of his documents were corrupt.  The file was one of the ones he has made available offline.  When he got into the office he ran a manual sync, to put the updates onto
    our shared drive.  When he next came to open it, the file was corrupt with the following message:
    'Excel cannot open the file 'XXXX XXXX.xlsx' because the file extension is not valid. Verify that the file has not been corrupted and that the file extension matches the format of the file'.
    I ran the file through Excel's file repair, which couldn't fix the problem and I tried a few software packages from the internet which said the file was unrecoverable, to no avail.  We tried to recreate the issue but couldn't so we put it down to a one
    off.  A few days later, it happened again under the same circumstances.
    I put it down to something happening while the laptop was offline, however whilst researching this, the same problem happened on a Windows 8.1 Pro Desktop.  This system never leaves the office, which led to some confusion.
    Everywhere I look points to ransomware, however I have run full scans with Sophos and Malwarebytes, and both come back clean, and the issue is only occurring on 8.1 Pro systems, 7 Pro and 8 Pro systems are fine.
    The user with the 8.1 Pro desktop created a test spreadsheet for me, and this morning we managed to recreate the problem.  When running a manual sync, the Offline Files comes back with an error, stating that the network copy has been deleted, would you
    like to copy the local copy or delete it?  When we copy the local copy to the network, and then try to open it, we get the previous error about file corruption.
    Any help would be greatly appreciated as I will have to roll the systems back to Windows 7 if I cant get it resolved, which would be a shame as the laptop is has a flip screen to turn it into a tablet.
    Cheers
    Jim

    Hi,
    You can boot the problematic system with clean boot to check if there is any third party software conflicts.
    Steps to clean boot: 
    1. Click Start->Run...-> type msconfig and press Enter
    2. Click Services tab and select Hide All Microsoft Services and Disable All third party Services.
    3. Click Startup tab and Disable All startup items
    4. Click OK and choose Restart
    5. After reboot, check whether the problem still occurs
    In additional, please refer to the thread below to troubleshoot the issue:
    ms excel problem
    http://social.technet.microsoft.com/Forums/office/en-US/fc38d024-c767-4b9d-9ba8-60422240f579/ms-excel-problem?forum=officesetupdeployprevious
    Regards,
    Mandy
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • File corruption with a very large .ai file

    A little background first:
    I am a graphic designer/cartographer with 15+ years of experience. I started making maps in Illustrator with version 6 and have upgraded to every version since.
    My machines:
    2x Mac Pro 8-core 3.0GHz, 16GB RAM, 10.5.7
    Mac Pro quad-core 2.66GHz, 8GB RAM, 10.5.7
    MacBook Pro 2.0GHz, 2GB RAM, 10.5.7
    Illustrator specs:
    All machines have CS4 installed as well as Illustrator 10.
    The 8-core MPs have the MAPublisher Plug-ins installed
    The 4-core and MacBook Pro (MBP) does not have the MAPublisher Plug-ins
    The problem I am having can be replicated on each of the machines. The MBP can't handle the file due to RAM. Since this occurs on machines that has MAPublisher installed and a machine that does not, I think we can rule out a plug-in issue.
    File specs:
    The original file: version 10, file size (uncompressed, no PDF support, and no font-embedding) is 36.4 MB. There are no raster effects or embedded/placed images. This is strictly a vector file. Artboard Dimensions: 85.288 in x 81.042 in
    The original file, converted with CS4, and then saved as a CS4 file: file size (uncompressed, no PDF support, and no font-embedding) is 97.9 MB.
    Brief Description of the problem:
    I have tried to convert this file into every version of CS and it has failed every time. With each version, it has resulted in an unusable file for different reasons. CS-CS3, the file was completely unusable because of the opening/saving time. It could take as long as 3 hours to save the file. With CS4, this has been rectified and I once again tried to convert it. Upon re-opening of the 'converted' CS4 native file, the file is 'corrupted'.
    The file corruption is not your regular "This file can't be opened because of: X" corruption. The file opens after a save/close just fine. It is just that parts of the file gets destroyed. To save space in this post, I have created a webpage that illustrates the problem that I am having:
    http://newatlas.com/ai_problem/
    I have tried everything possible to make the file smaller and it is as slimmed down as I can make it. (Using symbols, styles, etc.) I have also tried to eliminate this as a font problem by replacing every font with an Adobe supplied font, cleared caches, etc. This does not work, so I think we can rule out a font issue. I have also reduced this file to contain no pattern fills, no gradients, and just used simple fills and strokes. All to no avail. I have also tried piecing the file back together into a new document by copying/pasting a layer at a time. Saving, closing and re-opening after each paste cycle. I can get about 95% of it put back together and then it will manifest the problem. The only thing I haven't done is to convert all of the type to outlines. This would not solve my problem since this is a map that I continually work on year after year. I also can't remove objects or cut the overall area of the map because this file is used to produce an atlas book, a wall map and custom boundary wall maps. You can view the entire file at:
    http://okc.cocpub.com
    If I do not convert the legacy text, the file saves/closes/re-opens just fine. It just takes a very long time. So this leads me to think that the cause of the problem is the number of editable type objects that this file has. Ever since Adobe changed the Type Engine, I haven't been able to use this file in current versions of Illustrator.
    If I could get this file to open, uncorrupted, I could finally get rid of Illustrator 10. Illustrator 10 does not have any problem with this file (and is still faster than CS4 in everything except selecting a lot of objects.)
    I am posting this on the forums for any other opinions/ideas from the 'Illustrator Gurus' as a first step. I want to get in contact with someone at Adobe to see if we can address this problem and possibly get it fixed with CS5. I know that this is a user-to-user forum, but I'm not sure who, where and how to contact Adobe for this issue. Maybe someone on these forums can help with that as well.
    Thank you for your patience for getting this far in my long post and I would really appreciate any response.
    Dave

    Thanks Wade for responding,
    Did you try trashing your Adobe Illustrator CS4 Settings folder in your User's Preferences?
    Yes, I've tried deleting prefs. Basically I've tried to rule out any problems with Illustrator as a whole. This issue has also occured on a clean install of OS X and Illustrator on a new User Account with the opening of this file being the first task that Illustrator has. There is no problem with Illustrator per se, but I think it is more of a limitation in Illustrator based on the number of type objects.
    You could also try saving it out of 10 as a pdf or as postscript and distilling it then open that in ai or place it id a blank AI document.
    Did you try to place instead of opening it?
    I haven't tried any of these since the resulting file would be utterly unusable. Basically this would create a 'flat' file with 'broken' strings of text (type on a path especially) and type being uneditable. (Now that I think about it, CS4 does a much better job of opening pdfs without breaking type.) I still think this approach is not really a prudent course of action since, as of now, I can continue to maintain this map in Illy 10.
    In my experimentation, the results are as follows:
    1. Opening the file without updating the legacy type, saving the file as a new document, closing and then re-opening results in a file you would expect. Every object is where it is supposed to be. Downfall of this method: I absolutely need the type to be editable, especially the 'Street Type' since this type is actually used to create map indexes.
    2. Opening the file with updating the legacy type, saving the file as a new document, closing and then re-opening results in a file that exhibits the exact behavior that has been posted in the thread-starter. This method results in the 'Bruce Gray' type being the duplicated item.
    3. Opening the file without updating the legacy type, then splitting the file into layer groups and saving as separate files. Then opening the resulting CS4 files, updating the legacy type, copy & pasting (with layer structure) into a new document results in a usable file up to a point. I can get about 95% of it put back together and then the problem manifests. I have thought that it might be a "bad" object on one of the layers but I have ruled that out by: a.) All of the resulting sub-files (files that are portions of the larger) exhibit no problems at all. Usually our PS printers find issues that Illy does not and there is no problem in RIPing the sub-files. b.) If I change the paste order, meaning copying & pasting from the top-most layers to the bottom-most layers, vice-versa, and a completely random paste order, different objects (other than the 'Bruce Gray' type) will be duplicated. I've had one of my park screens, a zip code type object and a school district boundary be the duplicated object.
    All of these experiments has lead me to believe that the Illustrator Type Engine is the main facilitor. I just don't think it can handle that many individual point type objects. I know CS4 can handle the number of objects, based on the fact that a legacy type (non-updated) file works.
    I am almost entirely sure that Illustrator is working exactly as it is supposed to and that the vast majority of Illy users will never run into this issue. This file is by far the largest file that I work on. I would just like to be able to use an Intel native version of CS to continue maintaining this map.
    On a side note: About three years ago, I tried working with this file in Freehand MX. Freehand initially would open the Illy file without a problem. I could work on it but when I would save it as a Freehand file, close it and re-open it, I would get your standard File Corruption. It would partially open, give me a corruption dialog, and open the file as a blank document. I alwa ys knew there was a reason to use Illustrator over Freehand for making maps.

  • File corrupt error

    Hello All,
    Using Adobe Mobile Packager and a swf files, i created a package for the Symbion Phones which is a self signed .sis file. When i tried installing it to the phone.......it gave an error  "File Corrupt Error" .
    Any guesses for the error?????
    Also, the .swf file was created using CS3 suite. I don't know if this is a silly question........but can Adobe Mobile packager create package for swf files created using CS3........or is it only for .....CS4???????
    Would appreicate all replies or any kind of help for this issue.
    Thanks and Regards
    H.R.

    I don't use adobe mobile packager for this purpose; however there are some basic things to worry about during packaging so that your file won't be corrupted:
    1> Did you Entered Correct UID order for an edition (2nd or 3rd Editions)?
    2> Did you create .key and .cer files ? (key and certificate) ?
    3> Did your Swf run normally in the mobile phone before packaging ?
    4> Did you make sure you entered a valid path for your application to be installed during extraction ?

  • File Corrupted in E-Mail Set up N97

    I just bought a used N97 on ebay to replace mine which was lost. So far it hasn't been plain sailing syncing from my pc. One of the problems I have is in email set up, where I want to sync my Gmail account I go to the set up. I get "preparing installation", "Install Nokia Email version 10.00(39)" click on OK and then I get the error message "File Corrupted".
    Can anyone help please?

    Hi Buttefly wishes and welcome to the forums!
    here is an excellabt post by JERRYD for BIS (personal email) setup:
    http://supportforums.blackberry.com/rim/board/message?board.id=8100&message.id=5661&query.id=110699#...
    If you need more info please ask!  If not please resolve the thread using the options by the Kudos’ star, Just place the check in the Post that answered your question, Thanks    
    Click Accept as Solution for posts that have solved your issue(s)!
    Be sure to click Like! for those who have helped you.
    Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

  • Kernel panics, graphic file corruption with Firewire

    I've been having consistent problems with Firewire since I got my Mac Pro last year. I only recently narrowed it down to Firewire so I thought I'd write it up here for the record.
    I never actually solved the problem, just started using USB-2 instead and the issues went away.
    --I had been getting pretty consistent kernel panics while doing backups or large file transfers to an external FW drive. I tried a few different drives and cables and the panics were consistent.
    --I also noticed a strange problem where graphic files I'd backed up (TIFF, JPEG, etc.) would have these single-pixel horizontal streaks running through them. This was a little disconcerting because it wasn't picked up during verification, it was just there when I opened the backup file.
    I found lots of people with FW problems in these forums but none mentioned that strange file corruption I got.
    I'll try FW again after a future system software upgrade but I'm giving up on it for now.

    I've been having consistent problems with Firewire since I got my Mac Pro last year. I only recently narrowed it down to Firewire so I thought I'd write it up here for the record.
    I never actually solved the problem, just started using USB-2 instead and the issues went away.
    --I had been getting pretty consistent kernel panics while doing backups or large file transfers to an external FW drive. I tried a few different drives and cables and the panics were consistent.
    --I also noticed a strange problem where graphic files I'd backed up (TIFF, JPEG, etc.) would have these single-pixel horizontal streaks running through them. This was a little disconcerting because it wasn't picked up during verification, it was just there when I opened the backup file.
    I found lots of people with FW problems in these forums but none mentioned that strange file corruption I got.
    I'll try FW again after a future system software upgrade but I'm giving up on it for now.

  • Log file corrupt and can't open the database.

    I use Replication Manager to manage my Replication; and there is only one site currently in my application.
    I killed the App process with signal -9. (ie. $ kill -9 appID).
    Then I try to restart the App, but the event_callback function got a PANIC event when to open the envirment.
    The open flag is:
    flags = DB_CREATE | DB_INIT_LOCK | DB_INIT_LOG | DB_INIT_MPOOL |
    DB_INIT_REP | DB_INIT_TXN | DB_RECOVER | DB_THREAD;
    ret = dbenv->open(dbenv, path, flags | DB_SYSTEM_MEM, 0);
    What's the reason cause this problem?
    How can recover it ?
    The logs list as below:
    [D 11/19 09:44] dbpf using shm key: 977431433
    [E 11/19 09:44] [src/io/dbpf-mgmt.c, 400]
    [E 11/19 09:44] yuga: DB_LOGC->get: LSN 1/9776: invalid log record header
    [E 11/19 09:44] yuga: Log file corrupt at LSN: [1][9906]
    [E 11/19 09:44] yuga: PANIC: Invalid argument
    [E 11/19 09:44] [src/io/dbpf-mgmt.c] Rep EventGot a panic: Invalid argument (22)
    Edited by: dbnicker on Nov 18, 2010 6:08 PM

    First, what version of Berkeley DB are you running and on what system?
    The error indicates something amiss in the log. The LSN values are quite
    small. Can you run 'db_printlog -N -h <env path>' and post the log
    contents?
    If you are using BDB 5.0 or later, can you also post the contents of
    the __db.rep.diag00 file in the environment home directory? Thanks.
    Sue LoVerso
    Oracle

  • EA3500 HDD File corruption

    Hello, everyone!
    I have recently bought a cisco EA3500 router for my home network and i am pretty surprised to see that a router from the world leader in the networking domain cannot perform as expected.
    The first problem i had was that the network (wired and wireless) was dropping from time to time for a couple of minutes with the power led of the router blinking. I turned off the log feature of the router and it seems that until now the problem is resolved.
    Now, the second and, at least as annoying as the first, is that i have a 640gb usb hdd connected to the router, formatted NTFS.
    It seems that every now and then a file gets corrupted, that is, it is transformed into a folder! And it cannot be recovered without pulling out the hdd and using a 3rd parth software for file recovery.
    I have the latest firmware. Should i switch back to the classic firmware instead of the "fancy" new one? I really need my files on that drive, so i cannot risk loosing them in this random manner.
    Thank you.

    mihai.vasiliu wrote:
    I have installed the older, classic firmware. The internet drops seems to have been fixed, but the HDD file corruption still persists! Please help! I lost some important files from my HDD. I cannot believe this is happening on a cisco router.
    I quickly learned that the EA3500 does not have the processing power to handle a large disk.  This is especially true if there are a large number of files on the disk.  Save yourself some aggravation and connect the disk to a 24/7 computer.  I no longer use the EA3500 USB port for anything.  It was unstable even with a 2 GB thumb drive.
    It was Cisco in name only.  Now that Cisco has sold Linksys it is just a Linksys router.

  • 3.8.0 Master Server file corruption

    We had two of three drives fail on the master server and it resulted in file corruption and is unrecoverable. We have a slave server with users who haven't been able to login because they rely on the master to redirect the client. I've had to rebuild a replacement master server from scratch using the same name, IP, settings, etc. Naturally, the replacement master is unaware of the old slave. Can I re-run simias config on the slave to make the replacement master aware without impact to the data & accounts already on the slave?
    Thanks,
    fdiaz

    No, you cannot do this.
    >>> vodobaas<[email protected]> 5/7/2012 8:16 PM >>>
    We had two of three drives fail on the master server and it resulted in
    file corruption and is unrecoverable. We have a slave server with users
    who haven't been able to login because they rely on the master to
    redirect the client. I've had to rebuild a replacement master server
    from scratch using the same name, IP, settings, etc. Naturally, the
    replacement master is unaware of the old slave. Can I re-run simias
    config on the slave to make the replacement master aware without impact
    to the data & accounts already on the slave?
    Thanks,
    fdiaz
    Fdiaz
    vodobaas's Profile: http://forums.novell.com/member.php?userid=9033
    View this thread: http://forums.novell.com/showthread.php?t=455560

Maybe you are looking for

  • Loose screen on Macbook Pro Retina 15"

    Hey there, I am curious about something... and I might just being OCD over my super expensive laptop, but my screen is slightly loose on my Macbook Pro Retina 15". If I open the screen, I can slightly jiggle it on the right side, and it seems to be l

  • Appraisal document header not showing up in the Portal

    when I look at the appraisal document in Portal ESS MSS (using WD4A application Appraisal Document) the header of the appraisal document does not show up (in PHAP_ADMIN it does). how can I show the appraisal document header in the Portal? regards, Ti

  • TREX 7.0

    Hi, i want to install TREX 7.0 search engine in my system. can any one help me in solving the following issues? 1.iam having the documents regarding installation, i need the installation materials. where to download? 2.what is meant by Installation w

  • SSL image cache

    Hi, I have made an jsf web app using ssl.Now i'm testing the app on a real server and i have seen that my content loads much faster then the images.They are several small icons and table corners around 4 Kilo. Is any way to cache the images in the br

  • When trying to sync I am getting error 13019 which states unable to sync....

    I am trying to sync my iPod in iTunes and I keep getting error 13019 which states unable to sync.  iTunes is updated.