Files on director 12 being opened with director 11.5?

Can i upload adobe director 12 files on adobe director 11.5? As i am developing a game on 12 but the receiver only has 11.5.

Adobe has decided that only Director 12 and above can open files created in Director 12.
Technically, it is possible to modify the bits in a Director file that prevent older versions of Director from opening it (see here: http://forums.adobe.com/message/5144541 ), but it would probably be better to find a better workflow.
Can your correspondent install a trial version of Director 12, in order to test your files?

Similar Messages

HT204382 Got a 75MB video file tagged ".flv" Won't open with Quicktime. What do I need?

Got a 75MB video file tagged ".flv" Won't open with Quicktime. What do I need?

Download vlc player. It plays most formats of video and audio.
Ryan

In finder, or say anything else such as downloaded files, I have to push open with in order to open the file. If I simply double-click on a document from finder, it does not open.

Hey guys. I have this problem where when I try to open say a document from finder, I have to push "open with."
Simply double-clicking does not work. I would greatly appreciate it if anybody could help.
Another unrelated problem is that when I push to open itunes, it says that it is on a locked disk.
Thanks

Select a particular download file. Press COMMAND-I to open the Get Info window. In the Open With section choose the desired default application from the dropdown menu then click on the Change All button.
For .dmg files use DiskImageMounter (System/Library/CoreServices/ folder.)
For .zip files use Archiver - same folder as above - or download TheArchiver - MacUpdate or CNET Downloads.

Slow access to files that are already being opened by another user

HI,
A client has a Windows 2008 server setup with Windows 7 workstations. When a user opens a document (docx, xlsx etc) on the server it opens without an issues. If a second user tries to open the same file that the first user is in, the second users
computer hangs for about 2-3 minutes before bringing up the 'another user in accessing this file' box. This is happening with every file type and with any user.
Any ideas?

Hi,
Do you mean that only the office files have the issue or all file types have the issue? Please refer to the thread below to troubleshoot the issue:
File Server Role: Slow access for "opened files" and slow Explorer browsing
http://social.technet.microsoft.com/Forums/windowsserver/en-US/3b73f5c3-9f6b-4270-bef3-14c14137e734/file-server-role-slow-access-for-opened-files-and-slow-explorer-browsing?forum=winserver8gen
Regards,
Mandy
If you have any feedback on our support, please click
here .
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Large size file could not copy from "Open with explorer" in SharePoint.

Hi,
I have uploaded around "120 mb" file in Document Library. I was trying to copy that file from "Open with explorer" to my local system. I am getting "disk Space error".
Should i specify any size at any where in "Central Admin".
Thanks & Regards
Poomani Sankaran

To resolve this issue, follow these steps:
1. Click Start,
click Run, type regedit,
and then click OK.
2. Locate and then click the following registry subkey:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\WebClient\Parameters
3. In the right pane, right-click the FileSizeLimitInBytes value,
and then click Modify.
(If
FileSizeLimitInBytes does not exist then right-click the blank space in the right pane, click New, click DWORD
Value, type FileSizeLimitInBytes,
and then click OK)
4. Click on Decimal,
and type 4294967295 and click OK. Note The
default value for the file size limit is 50000000 bytes.
5. Quit Registry Editor. Restart the computer.
CAUSE
This issue occurs because a security change that was introduced in Windows XP SP2 affects the Web Distributed Authoring
and Versioning (WebDAV) redirector. This security change makes sure that an unauthorized server cannot force a client computer into a denial of service attack. If you try to download a file that is larger than 50000000 bytes, the client computer interprets
this download as a denial of service attack. Therefore, the download process stops.
IMPORTANT
This section, method, or task contains steps that tell you how to modify the registry. However, serious problems might
occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs. For more information about how
to back up and restore the registry, click the following article number to view the article in the Microsoft Knowledge Base
How to back up and restore the registry in Windows
http://support.microsoft.com/kb/322756

Font style of pdf files changes when it is opened with adobe reader 10.1.2 version

The font style of pdf files changes if opened with adobe reader 10.1.2 version.
Plz suggest wht to do....
Following is the screenshot from adobe reader
view: 75 % zoom in adobe reader (issue)
view: 75 % zoom in foxit reader (no issue)
Thanks,
Neha

Hi,
Can you please share the PDF with which you are seeing this issue.
You can mail me the PDF to e-mail that i have specified in the private message send to you.

Java 8 SYMLINK files not working; gives an "Open With..." dialog box

We just upgraded to Java 8 Update 40 and we're having trouble using the new path to the Java executables.
Java.exe, javaw.exe and Javaws.exe are no longer installed in the SysWow64 folder. Instead, SYMLINK files pointing to the files locations in C:\Program Files (x86)\Java\jre1.8.0_40\bin are installed in C:\ProgramData\Oracle\Java\javapath, which is also added to the front of the PATH environment variable.
But if we try to use those SYMLINK files, whether in an app shortcut command that opens a .jar file, or by simply double-clicking them, we get an "Open With..." dialog.
But they do seem to work when run within a cmd prompt.
Using the path C:\ProgramData\Oracle\Java\javapath (or no path at all since that folder is in the PATH variable now) is preferable over the version-specific Program Files path. If we use the Program Files path, we'll have to update any shortcuts that run Java executables every time Java is updated to a new version_update number.
Has anyone else seen this? Is there a fix?
Thanks
Jeff

Also have this problem. We also used to point our java app shortcuts to the system32 or syswow64, but with Java 8 this is no longer an option. Updating shortcuts every time there is a new java version is unrealistic. Similar to Jeff, the symlinks in the ProgramData folder don't seem to work.

I have to select a file – get Info – and change – open with and change from preview to another program and CHANGE ALL everytime I boot up

Why do I have to select a file – get Info – select – open with – and change from Preview to another program and click CHANGE ALL with every file extention everytime I boot up.

Back up all data.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
Triple-click the following line to select it. Copy the selected text to the Clipboard (command-C):
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -Rh $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2 (optional)
The first step should give you usable permissions in your home folder. This step will restore special attributes set by OS X on some user folders to protect them from unintended deletion or renaming. You can skip this step if you don't consider that protection to be necessary.
Boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
resetpassword
That's one word, all lower case, with no spaces. Then press return. A Reset Password window will open. You’re not going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

File is "too new" to open with the same software I used to make it.

After the external hard drive that held all my project files crashed, I tried to open the autosave backup file that was saved to my laptop only to receive a message that this file is from a more recent version of FCP. This is odd since I only have one copy of FCP that has never been updated as it is a student version... Any ideas how this might happen or what I can do about it?
Thanks,
Kevin

Disconnect the media drive, then launch the project...see if it opens. When it does...IF it does, then save it as a copy, turn on the Media drive, and launch the copy.
Shane

Files, icons, docs won't open with double click

Suddenly when I double click, nothing happens. I have to use keyboard commands to open files, icons, docs, folders, etc. Did I inadvertantly set something? I have a Mighty Mouse and this was never a problem before. Thanks
Mac G5 Mac OS X (10.4.9)

Try cleaning your mouse:
Use a clean lint-free cloth lightly moistened with water. Wipe the ball and the surrounding area, making sure to rotate the ball itself to ensure complete coverage. If the scrolling feels rough or if the scroll ball isn't scrolling up, down, or side-to-side, hold the mouse upside-down and roll the ball vigorously while cleaning it to help dislodge any particles that may have collected on the internal hardware. You can also give it a good (but not too god) whack to dislodge stubborn particles.
Let us know if that helps,
Miriam

I have a large number of photos on 1.44MB discs. Quicktime flags the files as corrupted but they open with the on board program. The file has a quicktime xtension.

I have a lot of 1.44MB disks with pictures. When I tried to open them I got a message that Quick Time was not properly installed. I uninstalled and reinstalled Quick Time as instructed. Then I got a message that Windows Picture and Fax Viewer was missing, I corrected that and now get a message that the picture files are corrupted. But if I use the program that is on the disk, the pictures appear just fine. Any thoughts as to what is going on? The file structure on the disc identifies the pictures with a Quick Time icon and as Type PICT. The properties window shows a .pic extension. Any thoughts on how I can get this to open in an XP Pro or Vista PC?

Use the on board viewer program to export the file as bitmap or jpg and work with that.

Script to open all PST files in a directory and open with Outlook.

Hi! I am looking for a script that opens all PST files in a directory, opens it in outlook, and writes to a log to see if it completed correctly. I'm new to VBscript and just want to see how the script would be written.
Thank you!!

Thank you for all the input! JRV, I went through the repository and couldn't find anything about importing into Outlook. I will use it for future references and I appreciate you directing me there.
Grant, I need to be able to locate all PST files within a directory, not point it to a specific pst. I also need it written to a log file. Here is what I have...Don't laugh, I'm very new...
const ForAppending = 8
set objTextFile = objFSO.OpenTextFile ("C:\Users\jimmy.nguyen\Desktop\Lucky.txt", ForAppending, True)
set objFSO = CreateObject("Scripting.FileSystemObject")
Set objShell = CreateObject("WScript.Shell")
strCommand = "C:\Program Files (x86)\Microsoft Office\Office12\outlook.exe"
Set objExecObject = objShell.Exec(strCommand)
wscript.sleep 4000
Set myOlApp = CreateObject("Outlook.Application")
Set myNS = myolapp.GetNamespace("MAPI")
myNS.AddStore "objfile.name"
Sub ShowSubFolders(fFolder)
Set objFolder = objFSO.GetFolder(fFolder.Path)
Set colFiles = objFolder.Files
For Each objFile in colFiles
If UCase(objFSO.GetExtensionName(objFile.name)) = "pst" Then
objFile.Name
End If
Next
For Each Subfolder in fFolder.SubFolders
ShowSubFolders(Subfolder)
Next
End Sub
strResults = ShowSubFolders(fFolder)
objTextFile.WriteLine(strResults)
objTextFile.Close

Swf files wrongly linked in Mac info 'Open With'

Together with others I have had a serious problem opening swf files with Flash Player. I hope this will help some of you and challenge Adobe to get their act together since this ought not so to be.
1. Background: As you may know, Flash Player 10 is not a stand along but only for web use (a plug in). One must keep or download the latest Flash Player 9 in order to play stand along swf docs. Had Adobe explained this clearly at the get-go it would have saved much frustration.
2. Together with others, some very strange things have happened to what was an automatic double-click=open option. In my Mac Info (on file) dialogue box many of my older swf files appear as programs with which I can open any swf doc. In fact, *all* of my hundreds of stand alone swf files are now set to open with some other swf doc (!) meaning that that doc appears and not the doc I am opening. It looks like the swf file has been recognized as a program rather than a simple swf file.
3. After much frustration, I tried to set Flash Player 9 in the Mac 'Info' dialogue box and then choose 'Change All,' but this is not allowed. It keeps wanting to open my swf with some other swf doc listed in the Info. I then changed each doc separately via the Mac Info dialogue box. This finally stuck ... but when I tried to Change All again with a doc set to open with Flash Player 9, everything returned set to open with some random swf file listed in the 'Open with' dialogue box (and these swf files should not be listed there as programs).
4. This entire confusion makes me think that the Adobe/Apple conflict is somehow coming into play here. Who is to blame I do not know, but I wish Adobe would address this since we how have used Flash to create very complex and beautiful swf docs for the classroom now have to open each doc by dragging it to the Flash Player in the dock, and this means that we must explain this to any user.
5. Summary: For whatever reason 'Open With' is confused, I should be able to correct the problem with choosing Flash Player 9 and then click 'Change All.' Can anyone tell me what is going on and how to solve this?
PS: This is happening to others whose Macs are totally separate from mine.

Hi seaslug and welcome to our community
I would think you could test the connectivity by playing them
locally to ensure they work. If the files all work fine on your
local PC, try copying them to a web server that isn't using SSL. If
they work fine there, then try the SSL. Basically, you want to pare
away the layers in order to see where things fall apart.
You may also wish to double check to ensure that all the
necessary files exist in the output folder. For example, maybe
someone forgot to include the associated HTM files. Things like
that.
Hopefully something here was helpful... Rick

Why does a my layered Illustrator file open with only one layer, when opened by someone else?

I am using CS6, as is the other user. When they open the file in Illustrator all the artwork is on one layer, even though the original file has numerous layers, and opens with these layers when I open it even now.
I have never come across this problem before in all the years I have used Illustrator and have had no joy when trying to search for this problem.
Any ideas or help would be greatly appreciated as it is confusing us!
Thank you.

Hi Mike, Wade & Larry,
Thank you so much for your replies.
Since I posted this issue, I was later informed that the other user is infact opening my files with CS5 and so a quick solution to this was saving it down to a previous version! Sorry for the confusion!
This problem then becomes clear that it was a version error, but I have always had an error message come up if I try to open something that was created in a newer verion - is this no longer the case?
I have been assured no pop up messages appear when opening the file which I find odd, and also that this layer compression has only just started happening even though many files have been back and forth previously.
A little mystery! At least for now it is all working ok again
Thank you all very much, greatly appreciated.

TS3212 when i download it saves as a file? itunes-setup? and ask me to open with a program. what am i missing

when i download i tunes im asked to open save cancel. wherever i save it saves as a file itunes-setup. when i try to open this file it asks me to open with a program. just want to download i tunes, i had it before, thanks

Have a look here > http://www.apple.com/support/itunes/install/

Files on director 12 being opened with director 11.5?

Similar Messages

Maybe you are looking for