Filter and navigation not working properly

Hi Gurus,
I have two reports - report1(source) and report2(target) report.
In report1, it shows two columns - Market_ID, Amount_sold
In report2, it shows two columns - Market_ID, Reasons(where Market_ID is made prompted)
In report1, I have made the Value Interaction as 'Navigate' and the target as 'path of report2' in Column properties ->Column Format
But, when I click on Market_ID(report1), it is NOT showing the details of that particulat Market_ID(report2).
It is showing the details of whole Market_ID in report2. That means, the filter is not working properly.
Is there any method in which the report2 shows the details of particular Market_ID which is selected from report1(market_ID)?
Best Regards,
J

yes you can,
in your source add a master_name column and in that make the navigation.
in the master_id column go to column format and style options and check the Use Custom CSS style option and type,
display: none
now in your source the master_id column will get hidden. in your target make the master_id prompted.
now click on the master_name in your source, your target will get filtered by the corresponding msater_id
thanks,
Karthick
Edited by: kart on Jun 7, 2010 11:52 AM

Similar Messages

TS3003 Installed QuickTime7 from Snow Leopard installation disc and still can't view videos on iPhoto. A box appeared saying "you have installed Mac OS X software older than your current version of Mac OS X and may not work properly." Now what?

Installed QuickTime7 from Snow Leopard 10.6.8 installation disc and still can't view videos on iPhoto. A box appeared saying "you have installed Mac OS X software older than your current version of Mac OS X and may not work properly." Now what?

Download and install the latest QuickTime Player for Snow Leopard > http://support.apple.com/kb/DL923

My iphone5c is still under the 1 year warranty, the top button constantly sticks and does not work properly will Apple still replace my phone even though there is a few chips and scratches on the back?

My iphone5c is still under the 1 year warranty, the top button constantly sticks and does not work properly will Apple still replace my phone even though there is a few chips and scratches on the back?

As Peter says above, only an Apple Store genius can advise you.
But to further clarify, you seem to postulate that if Apple helps you, the cure would be a replacement. That is not necessarily true. Let them look at it and advise you what the remedy is. They may offer you nothing (saying it's your fault), or they may offer you a solution (keeping your current iPhone), or possibly a replacement.

FireFox auto updated to 6.0 this weekend and has not worked properly since. I have uninstalled and reinstalled. Made sure all windows componets were up to date and still no joy. Any idea? Windows 7, 64 bit, normal configfuration. It is extreamly slow.

FireFox auto updated to 6.0 this weekend and has not worked properly since. I have uninstalled and reinstalled. Made sure all windows componets were up to date and still no joy. Any idea? Windows 7, 64 bit, normal configfuration. It is extreamly slow and never finishes loading ANY page.

I have had a similar problem with my system. I just recently (within a week of this post) built a brand new desktop. I installed Windows 7 64-bit Home and had a clean install, no problems. Using IE downloaded an anti-virus program, and then, because it was the latest version, downloaded and installed Firefox 4.0. As I began to search the internet for other programs to install after about maybe 10-15 minutes my computer crashes. Blank screen (yet monitor was still receiving a signal from computer) and completely frozen (couldn't even change the caps and num lock on keyboard). I thought I perhaps forgot to reboot after an update so I did a manual reboot and it started up fine.
When ever I got on the internet (still using firefox) it would crash after anywhere between 5-15 minutes. Since I've had good experience with FF in the past I thought it must be either the drivers or a hardware problem. So in-between crashes I updated all the drivers. Still had the same problem. Took the computer to a friend who knows more about computers than I do, made sure all the drivers were updated, same problem. We thought that it might be a hardware problem (bad video card, chipset, overheating issues, etc.), but after my friend played around with my computer for a day he found that when he didn't start FF at all it worked fine, even after watching a movie, or going through a playlist on Youtube.
At the time of this posting I'm going to try to uninstall FF 4.0 and download and install FF 3.6.16 which is currently on my laptop and works like a dream. Hopefully that will do the trick, because I love using FF and would hate to have to switch to another browser. Hopefully Mozilla will work out the kinks with FF 4 so I can continue to use it.
I apologize for the lengthy post. Any feedback would be appreciated, but is not necessary. I will try and post back after I try FF 3.16.6.

SaveState and restoreState not working properly :/

Here is my code:
public class UIChooser extends UIComponentBase implements StateHolder
private String submitedCategoryItemID;
private boolean transientFlag;
public UIChooser()
    super();
    transientFlag=false;
public boolean isTransient()
    return transientFlag;
public Object saveState(FacesContext context)
   System.out.println("saveState");
    Object[] values = new Object[2];
    values[0] = super.saveState(context);
    values[1] = submitedCategoryItemID;
    return values;
public void restoreState(FacesContext context, Object state)
    System.out.println("restoreState");
    Object[] values = (Object[])state;
    super.restoreState(context, values[0]);
    this.submitedCategoryItemID = (String)values[1];
}saveState and restoreState not working.
Phrases "restoreState" and "saveState" aren't displayed and value of submitedCategoryItemID not restored. :/ What's happend?

yes you can,
in your source add a master_name column and in that make the navigation.
in the master_id column go to column format and style options and check the Use Custom CSS style option and type,
display: none
now in your source the master_id column will get hidden. in your target make the master_id prompted.
now click on the master_name in your source, your target will get filtered by the corresponding msater_id
thanks,
Karthick
Edited by: kart on Jun 7, 2010 11:52 AM

Touch and keyboard not working properly

hello there,its been one month i am using this laptop hp envy energystar 15-u201ne. i have an issue on touch and keyboard..sometime when i am typing there is no effect in screen from keyboard. and sometime the touch is not working properly. how can i fix this issue..?

Hi ,
Thank you for visiting the HP Support Forums and Welcome. It is a great site for information and questions. I have looked into your issue about your HP ENVY 15-u201ne x360 and issues with the TouchScreen and the Keyboard not functioning correctly. Here is a link to the HP Support Assistant if you need it. Just download and run the application and it will help with the software and drivers on your system that need updating. If you need it here are links to troubleshoot the Touchscreen and the Keyboard. I hope this helps. Thanks.

Wifi and Bluetooth not working properly on my iphone

MMy iphone are not working properly it's is not in warranty but they have many of problem in my iphone so please gave me solution of problems otherwise i break my iphone if want that

Use the search function at the to right of the forum, look for the thread with the green checkmark.

"This cable is not certified and may not work properly..." Official Apple cable!

I am using an official Apple charging cable and keep getting the message "This cable is not certified and may not work reliably..." And this cable has worked until now! Restarting the phone works sometimes but only for a bit.
What's wrong here/

Thanks, but it didn't fix it. I've tried 3 different Apple cables and I get the same message with each. I'm guessing it's the port has become defective somehow although with all the other questions about the same issue, I wonder if it could be a software issue!

Report Navigation not working properly

I have a scenario where in i need to provide navigation on a column so that when clicked it should get the detail report corresponding to the value I click on.
Lets say, I have a static filter abc in the detail report as well as summary report.
When I run the detail report individually on a dashboard page, I am able to see the filter abc in the filter list below the report.
But when I navigate from the summary report, this filter is missing in the filter list as well as in the physical query.
As a result of this the records which have to be filtered on this filter "abc" are not getting filtered.
Can you please help in this.
Thanks,
Swetha

David, I think that will show the user No Results when navigating from the summary report unless he clicks 'abc'.
To the OP, I think you should have 1 filter, unprotected, set to 'abc'. That way when you go to the report directly, it is filtered to 'abc'. But if you navigate to it from the summary report, you it will get filtered to whatever you clicked, 'abc', 'xyz', etc.
If that isn't working, I would check your column formula in the summary report and the target report and make sure they are the same.

"Filter Finder Items" not working properly

I'm taking my first crack at Automator, and while I've made good progress, one of the built-in actions, "Filter Finder Items", is just not behaving predictably. Basically, I'm doing the following:
1) Get selected finder items - pulls a selected folder
2) Set variable - this gives me a variable for the name of the folder we're working with
3) Create a new folder inside the selected folder
4) Get folder contents of selected folder
5) Filter for three different file extensions - here's where my problem starts
6) Move the filtered files into the new subfolder (though it really seems to be copying, which necessitates the following steps to get rid of the original files)
7) Get contents of selected folder again
8) Filter on the same three files extensions - this time it works properly
9) Move filtered files to Trash
For some reason, the first filter action doesn't seem to be working at all - if I have 15 files in the selected folder, but only three that match the filter, all 15 will be copied to the new subfolder. The second folder action will then, inexplicably, work exactly as it should and move the proper files to the Trash.
Does anybody know why this action doesn't want to cooperate? Has anybody else seen something similar?
Thanks for any hints/help.
Rick
Message was edited by: rnb2

Saving the workflow as an application should be all that is needed, but the first action (the one that gets the items to work with) may not be correct for your usage. If the first action is *Get Selected Finder Items*, unfortunately the selection would be the application itself, since that is what was most recently selected.
In this case, the application can be dragged onto the Finder's toolbar (where it will work with the current selection), otherwise the first action can be removed and the application used as a droplet (items dropped onto the application are passed to the workflow) or a Finder plugin.
The first action can also be replaced with an *Ask for Finder Items* action (ignoring input).

9810 funtions and screen not working properly.

HI all, hoping to find some help here. My 9810 is acting up. None of the keys are working, even the 5 below the screen. Sometimes the track pad works but not when it is pressed, and when the back botton works it puts me into sreach mode and looks for the letter "H" only. The touch screen is fine. This was before upgrading to OS7.1. I have done multiple hard resets and it does nothing at all. This has been going on for three days now. It hasn't be dropped or anything.
Last night I upgraded to OS 7.1 now my back ground does not rotate properly with how the phone is being held it does rotate, When you hold it upright it thinks its on it's side and vise versa.
Has anyone had a similar problem, and how can I fix it? Or is it one of those ones when you just get a new phone. I have only had it since Feb 29, 2012
Thanks

Hello Champi,
Welcome to the BlackBerry Support Community.
The following article will assist regarding the issue you are experiencing with the keyboard and trackpad on your BlackBerry® Torch™ 9810 smartphone:
Trackpad, trackball, or keyboard not working on a BlackBerry Smartphone - http://www.blackberry.com/btsc/KB29640
We hope this helps.
Thank you.
-FB
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click "Accept as a Solution" for posts that have solved your issue(s)!

IPod Touch 5th gen headphone jack and battery not working properly

Yesterday my iPod touch 5th gen's battery started draning at an incredible rate. Won't last longer then 1 or 2 hours now. And add onto it the headphone jack stopped working properly. It's now only plays in one ear, it's all static over the sound it's supposed to play. I baby my iPod. This all happened out of the blue. What do I do to fix it?

Saraa22 , the same recommendation was given over a year earlier:
Try the following to rule out a software problem
- Check also Settings > General > Accessibility > Hearing. Make sure that the sound balance is not set all the way to "R".
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
Saraa22 wrote:
If anyone has this same problem with their Ipod touch 5g headphone jack. I found a way to fix it. I did everything of the above but nothing actually worked . But this is what worked!
First reset your Ipod by pressing down the on/off button and the home button at the same time for 10 seconds until you see the apple icon
Then after it turns back on : Go to settings then press on general. Then press on accessibility and scroll down and make sure MONO AUDIO is on!
This will definitely fix the problem.

Report navigation not working properly for the union report

i have a report which is union and i need to navigate to another report(detailed).the filters are not carried out to the detailed report .Please suggest me on how to get the filters ar e correctly applied on detailed report.I have prompted the fileds in the detailed report.

Hi,
Please refer to the below thread.
Re: OBIEE-UNION Request navigate is not working (Parameter value is not passed)
Hope it helps!
Thansk

Screen not working and device not working properly!

Npw im a careful person with mobile never had issues before
Earlier on in the day after just getting my phone today on contract with carephone warehouse i decided to do a little water test and take pics underwater , now the first thing i did was test the pressure of the device by going in the service menu and when i did it with flaps totaly firmmly close the pressure , so i fought well there shouldnt be any problems if i put it in like 6 inches of water in clean no redisidue sink ,now i checked the flaps 6 times bettore putting in water ,now at first i was working fine taking the pics and that thne after 3 mins i pulled out then wiped it clean next thing i know the screen stop working and after the device wont come on proper ie no screen displaying ,now I bouught this because of the amazing battery life and camera now this isnt a cheap pone so it should hold up to what it says it can do , im very disappointed
I cant afford to have pay for \a new and its not my fault any help guys?

thanls for the reply guys took it back showed and no water inside they swapped it for a new one justl ike that have another problem now tho
stockyvillage wrote:
If on UK take it back to CPW and get them to exchange it.You could use the sale of goods act or consumer rights.

Display as Key and Name Not working properly after upgrade to Bi7.0

Hi Bw Guru's
Recently we have upgrade our BW 3.5 system to BI 7.0 (Only system upgrade not applications ).
after the upgrade we are facing lot of issues with Bex Analyzer. The following are some of the issues
1) In BW3.5 after the execution of Workbook or query ,we can convert to local currency .
Right click on workbook -> Currency translation-> Database currency .
but after upgrade to BI7.0 this is not working ..
2) Characterstic Right click on workbook Dispaly as Key and Name is also not working ..
I know that Currency translation in BI7.0 works in different way compare to BW3.5 .we can use alternate option like By Target Currency from Database currency to convert to local currency and it is working fine in Bex,but businesss users want more friendly way ...because to select the above option they have to enter local currency and rate type ...
Do you we have any notes available for the above solutions ..?Do we need to upgrade Bex version also..?Is there any document which describe how the above things works after system upgraded to BI7.0?
Please suggest me..
Thanks in advance
Shu Moh.

Dear Harita
The first issue Currency translation in query or workbook is solved with SAP note 1119549.For second issue we have not found solution until now ,Once we find the solution we will update you..
Shu Moh

Filter and navigation not working properly

Similar Messages

Maybe you are looking for