Filter based on another analysis need to run as a seperate query obiee 11g
Hi,
I have a main report which has a filter condition that depends on the another request(Created through Filter based on another analysis).The Filter based on another analysis report query comes as a embedded query along with the main query (making a subquery).As it has a subquery it is taking more time to fetch data.
Is there any possiblity of running the Filter based on another analysis report as a seperate query.
Please suggest.
Thanks,
Soukath
Hi,
Make sure one thing,u have eanble check box and submit sql button in the bottom of Advanced tab then save it and try again it will work.
refer:
http://tipsonobiee.blogspot.com/2009/06/step-by-step-to-bypass-all-caches.html
Thanks
Deva
Edited by: Devarasu on Dec 19, 2011 11:59 AM
Similar Messages
-
Paste filter format to another analysis.
Hi,
I have a few analyses already created and now I want to add Filters view to each of them. The view has specific format. I want to use the same format in each analysis.
After adding the view to the next analysis, I wanted to paste the filters view format of the first analysis to the second one. However, the paste icon is disabled in the second analysis. I have noticed that in the first analysis it's enabled.
Is there a convenient way to use the first analysis' filter format by copying and pasting it to the remaining ones?
OBIEE version is 11.1.1.6.6.
Thanks,
Manoj.iTunes Preferences > Advanced, and set "iTunes Media folder location" to a new temporary place. Now do the conversions to AAC.
This puts the new AAC files in their own Artist/Album folders, not intermingled with the Apple Lossless originals.
Now, you can simply copy over those entire folders to your SD card. -
Giving access to users to run BI Publisher reports in Obiee 11G
Hello Experts,
I am trying to give permission to couple of user groups to run the BI publisher reports i have created in Obiee 11g analytics. when they try to run them they error out contact administrator and i have admin rights and i can run the reports. I dont see anything regarding BI publisher in Manage privileges page to grant permission to the groups. Where should i enable or grant the permission to these groups so that they can run those reports. Any advise is greatly appreciable.
Thanks,
RCHi ,
Check the below link which will be helpful for you.
http://docs.oracle.com/cd/E17904_01/bi.1111/e13880/T539768T526688.htm
Thanks,
Ananth -
Error while running a KPI Watchlist in obiee 11g dashboard
I am getting the following error while running a KPI Watchlist :
*" Odbc driver returned an error (SQLExecDirectW) "*
I added two KPI's (KPI 1 & KPI 2)into that Watchlist , one from the default "Sample Sales Lite" (sub 1) and another from sub 2 which have essbase as data source .
KPI 1 (created from sub 1) is working fine , but while placing KPI 2 (created from sub 2 ) in the watchlist , its throwing the above error . However , while running KPI 2 individually , its showing meaningful results .
Let me know if the problem statement is not clear .
OBIEE version used : 11.1.1.5.0 .Could anyone reply this thread. I am also getting the same error . Even server logs are also not helping.
-
Hi,
I have an analysis which taking too long to show the results. I have executed the physical query of this analysis(generated by BI Server) on Database and it take 3 seconds.
Has anyone faced this issue? How to fix this?
Thanks in advance.Hi Raj,
Thanks for your reply.
1. Check the concurrent settings in the connection pool. What OS are you using? Make sure the query threads are not on wait mode.It is only happening to a particular Analysis. All others are running fine.
2. Is the analytics server merging multiple query results from the database? If so, check the memory settings on the analytics server.At the moment only this Analysis is running. There is no problem with the memory.
3. Also, you mentioned the query at the database comes back in 3 seconds. If you ran the query directly from the database server, you might want to check for network issues.There are no network issues...as there is problem only with this Analysis.
Thanks in advance. -
OBIEE 11g - Aggregation With filter
Hi all ,
I have a reg where the condition to be applied in ONE COLUMN of a report is as follows
select count(*)
from (SELECT SUM(quantity),SUM(quantity_received) qty_rec ,SUM(quantity)-SUM(quantity_received) qty ,po_header_id
FROM F_ERP_PO
group by po_header_id)
where qty > 0
and qty_rec <> 0
.. I have multiple columns in the reports with varying conditions
I tried out in different ways but could not bring the answer since this condition is just ofr one column and the next column has other conditions.
Kindly help me in simplifying this report . I am stuck with it for long
Thanks in advance,
Regards,
Niv dHi Chris,
Thanks for ur response.
I tried usinf FILTER() function in different ways. But I had a comparison like
FILTER("F1 Facts"."Total Revenue" USING (sum("PO"."Quantity") = sum("PO"."Quantity_Recieved") )) .
Here the error is like Cannot use aggregation with the USING clause .
I even tried with, Filter based on another request feature , it throws an error saying 'cannot use multiple select clause '
Any suggestions would be very helpful.
Regards,
Niv D -
OBIEE Report - filter based on the result from another analysis
Hi,
I am using OBIEE 11g,
I am trying to use a filter which is based on the result from another analysis. I have an analysis A which is as table 1, and I want to filter the respective columns of analysis B (Table B) based on analysis A to remove the duplicates for march 01, 02, and 07 , but it is not working properly. I took a max of start and end time when I created analysis A. Please let me know if I did anything wrong. thanks.
Table 1
Employee Number
Date
IN
Out
Start Time
End Time
xxxxxxx
2015-02-26
9:00
13:00
00:00:00
00:00:00
2015-02-27
12:00
18:00
00:00:00
00:00:00
2015-02-28
8:00
14:00
00:00:00
00:00:00
2015-03-01
14:00
20:00
14:00:00
20:00:00
2015-03-02
16:00
20:00
16:00:00
20:00:00
2015-03-07
14:06
20:02
14:00:00
20:00:00
2015-03-11
16:00
20:00
16:00:00
20:00:00
2015-03-14
8:00
14:00
00:00:00
00:00:00
2015-03-25
14:00
20:00
16:00:00
20:00:00
Table 2
Employee Number
Date
IN
Out
Start Time
End Time
Hours
xxxxxxx
2015-02-26
9:00
13:00
00:00:00
00:00:00
-3
2015-02-27
12:00
18:00
00:00:00
00:00:00
6
2015-02-28
8:00
14:00
00:00:00
00:00:00
6
2015-03-01
14:00
20:00
00:00:00
00:00:00
6
14:00:00
20:00:00
6
2015-03-02
16:00
20:00
00:00:00
00:00:00
4
16:00:00
20:00:00
4
2015-03-07
14:06
20:02
00:00:00
00:00:00
6
14:00:00
20:00:00
6
2015-03-11
16:00
20:00
16:00:00
20:00:00
4
2015-03-14
8:00
14:00
00:00:00
00:00:00
6
2015-03-25
14:00
20:00
16:00:00
20:00:00
4Why avg here?
What columns you want to show in the report?
for a employee for given date if he have 2 rows then you may sum up hours right?
Employee Number
Date
IN
Out
Start Time
End Time
Hours -
Powerpivot filter query based on another table's visible results?
Excel 2010 x32 on Win 7 x64
I have multiple tables coming into Powerpivot via SQL connection. They have some relationships pre-defined from the source.
I need to reduce the amount of data I'm bringing in for my testing. One of the tables has great granularity, containing every event in the database. One field in this data is "Event Type".
A separate table has a short list of the event types of interest.
I'd like to filter the first table's data pull (SQL refresh) to only include the event types that are listed (and visible) in the second table, in addition to an existing date range filter that is already in place. Ultimately my goal is to widen
the date range I can pull in before hitting Excel's memory limits, by eliminating the events I don't care about.
Currently I'm using a SQL query to pull in the granular data;
SELECT
[Fact RawData].*
FROM
[Fact RawData]
WHERE
[Fact RawData].[Event Date] >= N'2014-06-01T00:00:00'
How would I adjust this to also say "only where [Fact RawData].[Event Type] IN {a column in a data pull that is already in powerpivot}"
and how will that work under a "refresh all" scenario, where I would need the event table to update before this SQL is executed each time?
Many thanks!If I understand correctly, these articles indicate that I can apply filters during
data import, but I'm not clear how rows can be filtered during import based on
another powerpivot table results. <o:p></o:p>
From the first link:<o:p></o:p>
"For data feeds, you can only change the columns that are imported. You can’t filter
rows by values unless the source of the data feed is a report, and the report
is parameterized."<o:p></o:p>
So I guess the clarification of my original question is: How do I create a parameterized
report, based on the data in another powerpivot table, and also ensure that the
parameterized report is executed /after/ the source powerpivot table is
refreshed so that the proper row filtering is applied?<o:p></o:p>
Simplified example:<o:p></o:p>
Table 1 = List of all physicians who have ever had a patient in a large hospital system.
Filter when bringing results into powerpivot limits results to physicians from
a target physician group, clinical specialty, or other filter based on reporting needs. <o:p></o:p>
Table 2 = anonymized records for all patients, physician listed in each record. Filtered
by time period when bringing into powerpivot.<o:p></o:p>
I could bring back the whole patient table, but it is so large that Excel runs out of
resources unless my time period is tiny. If I can limit the returned rows from
Table 2 based on the current list of physicians shown in Table 1, then I will
have a much smaller data set and can expand the time period filter to be more
meaningful and make sure all the target records are brought back, without
having to run multiple subsets of physicians or time, and still have to
merge/remove duplicate records.<o:p></o:p>
Thank you for any advice/URLs/etc.<o:p></o:p> -
Installed Forms 11g ok but do I need another HTTP Server to run APEX?
Friends,
I have posted this Installed Forms 11g ok but do I need another HTTP Server to run APEX? over in the Forms forum. I'm not sure if it's best suited to here?
I'm not chasing for an answer, just trying to find the correct place for my question.
Thanks
IanThe answer from a software licensing perspective depends on the licening model you are on. If Unified Workspace Licensing (UWL), then you already have license entitlement to CUP under the Business Edition of that licence program. If you are on a DLU or UCL-based license program, CUP is seperately licensed.
You will need s seperate MCS server.
Softphones again depend on your license schema. If UWL, each user is entitled to one softphone. DLU and UCL each charge for softphone usage seperately. -
Filter EPM Property values based on another property in same dimension
Hi,
I need to restrict property values of a Dimension based on selected value of another property of the same dimension.
For example, in Material Dimension, I have properties Planner and LOB
Material
Planner
LOB
100
ABC
LOB1
200
ABC
LOB1
300
XYZ
LOB2
The Planner will select a Planner Name, based on which the corresponding list of materials should be shown along with LOB.
I have tried EPMDimensionPropertyValues but it doesnt allow to restrict the IDs based on another filter condition.
Please help.Thanks everyone for the response.
As mentioned in the post, the requirement is a bit twisted.
Let me rephrase the requirement:
I need to have two dropdowns ( which should act as filters to the template).
MATERIAL diemnsion has a property PLANNER.
I need to have the first drop down as list of all PLANNERS ( I could do this easily by EPMDimensionPropertyValues).
For the next dropdown, I need to show only those MATERIALS which has PLANNER1 ( lets say, PLANNER1 was selected in the first dropdown).
I am facing issues for the second dropdown, as I cannot have a condition to show the Property (ID) values in EPMDimensionPropertyValues
Also note that MATERIAL is not present in the report ( this is because we need a different aggreagation for material in the report) so we cannot use EPMDiemnsionOverride.
Please help. -
We are in the process of migrating from BPC7 SP12 Microsoft sql server to BPC10 netweaver on a sql server with BW7.4 and need to integrate our home grown data warehouse which is on a Microsoft sql server. The data warehouse currently connects to BPC7 using integration services/analysis services and runs mdx queries to analysis services to retrieve data from the BPC7 cube (view only). Please provide documentation on how to create this same integration with our data warehouse using BPC10 netweaver on a sql server.
When you were setting up your ODBC data source for
the Text driver, did you click on the "Options"
button? There's a lot of options in there that I
didn't understand at first glance.Yes I clicked on the options button, but the only thing there is dealing with file extensions. I left it set to the default.
I have since tried closing my connection after I insert a record, I then try executeQuery, but still no luck. Seems strange that I can write to the file but not read from it. If any thing I'd expect the opposite problem.
I have also tried using the class "JoltReport" from the sun tutorial instead of my own with the same result.
Message was edited by:
Hentay -
Filter based upon results of another request
How do I troubleshoot a Filter based upon results of another request issue?
I have a report that lists every account that purchased a product in May.
I have a report that lists every account that purchased a product between Jan - April.
I have a report that lists every account that purchased a product in May and also between Jan-apr. The problem is it's returning Account Names that are valid for May but not for Jan-apr and I dont' know why. It filters some but not others, interestingly enough it seems to split it down the middle.
Report A = 222 customers
Report B = 673
Report C = 111???
When I compare A to B manually I get 94.
Any ideas as to how I troubleshoot this?Worked it out ;-D
-
Need to run midlet from another midlet
Need to run midlet from another midlet
How to do it?
In my midlet user get link to web-page, and i want to start mobile browser with this page.Hi,
In order to run midlet from another midlet you may use push registry. Go through the API of that I am not sure but as far as I know push registry is the only solution to that
Sunil
Software Developer - J2ME -
I need to run web based Microsoft CRM. I open it in Safari but the program does not respond. I suppose it has to do with Flash or ActiveX. Can someone help?
What does the product developer say about system requirements? If it needs to be run from within Internet Explorer then you'll need to find a way to run Internet Explorer. Boot Camp or VM installation of Windows would be two options.
But first check the product requirements. -
Dashboard Prompt - Bypass filter based on value selected in prompt
Hi All
I need to create a dummy dashboard prompt that has displays two values 'Y' and 'N' (Yes and No). If 'Y' is selected, I want the report to 'Filter based on the results of another request'. If 'N', then the report takes the usual filters (not taking the 'Filter through another request' filter).
I have achieved this in the report filter by using an 'OR' clause (The Project Number is in Project Number Report OR 'N' = 'N' (presentation variable from the prompt) ). So if 'N' is selected the OR clause is satisfied and the results from the report are not taken in. If 'Y', the results from the report are taken in. This part is fine.
The problem is, on the dashboard prompt, there are a few constrained prompts. When these are selected, WHERE clause is attached 'N'='N' (the clause above). So when 'Y' is selected in the prompt, the condition fails and the constrained prompts do not show any results.
So, basically the idea is: How do I make my report run against 'Filter based on results of another request' when 'Y' is selected and bypass this (i.e. take the other filters) when 'N' is selected (Keeping in mind the constrained prompts).
Thanks
AnanthHi
I searched a little and found the following link
http://obiee101.blogspot.com/2009/02/obiee-switching-between-filters.html
This half-solves my problem. The issue is that, the above link uses a example of a dashboard prompt where there is only one 'Yes/No' prompt. What if there is a constrained prompt as well. In that case, when Yes/No is selected, a WHERE clause will be attached to the Constrained prompt (saying 'NO'='YES') and it will show 'No results'.
Thanks
Ananth
Maybe you are looking for
-
I have a Macbook Air that had some coffee spilled on the keyboard and as a result the plus/equals key is no longer functioning. Can I use a program like Ukelele to re-program another key to do that function? Can I re-program a function key to do this
-
Goods Receipt of HU for Process Order
Hi All, I have the following scenario. We are looking to implement HUM. We are using externally numbered HU's. Every HU when packed in prodcution may have a different quantity so we will not use packing instructions to save the deletion of non used H
-
Installing Windows on my MacBook Pro?
If I purchase this product: http://www.newegg.com/Product/Product.aspx?Item=N82E16832416806 Windows 7 OEM will I be able to install it on my MacBook Pro using bootcamp? It's a 15 inch that was purchased in mid 2010 and is currently running Mavericks.
-
Payment terms in SD credit invoices
Hii, We have problem with the payment terms in credit invoice and maybe you can help me. When a credit invoice is created based on a SD invoice the field Invoice reference "REBZG" is filed un the original invoice. The problem is that the payment term
-
Whenever I try to run a Java app that has a graphical component, it hangs if I use a 1.4.x JRE, although it will run with 1.3.x (assuming, of course, the app supports 1.3). This will soon become critical because my company is about to make the move f