Filter groups for outbound Vendor master , customer master idocs

I need to create Vendor , Customer IDOCS CREMAS and DEBMAS only when the user changes the company code . I do not want the IDOCS to be produced when any other fields change.
I am able to achieve the same using filter groups for Cost Center but not for Company Code.
Thanks,
Teresa

try BD52,

Similar Messages

  • Regarding segments in GL master, Vendor master, customer master

    Hi
    friends
    can any one tell me how many segments in GL master, Vendor master, Customer master.. I give your points...
    Thank you
    [email protected]

    Hi Kumar
    in GL - Chart of accounts level and company code level
    in Customer - Sales org level and company code level
    in Vendor  - Purchase org level and company code level
    Thanks
    Ashok
    Assign points for useful answer

  • Vendor and customer master

    Hi,
    I modified the vendor and customer master assigned in vendor master the number of the customer and viceversa
    so that it will be possible the clearing between the customer and vendor but I cannot find the fields "Clrg with vend." and "Clrg with cust."  in the related master data
    Regards

    Dear sappione,
    when ever you maintain Customer No. in vendor master & vendor No. in customer master. under Account control tab. pls press Enter. you will fing this fields under Payment data tab - You can find field  clrg with customer like as clrg with vendor in both masters - here you can select. then it will work.
    Note: Before you have select this check boxes in Document types(OBA7) here you can select KR , KZ, DR, DZ, under control data cust/vend check - pls select
    Regards
    shankar

  • Trading partner in GL, Vendor and Customer master

    Hi
    This is with reference to the clarification on field Trading partner in GL, vendor and customer master
    We have 10 company codes and are using same COA in all co codes
    We have activated Enterprise Consolidation in system and interunit profit elimination exist in our case.
    Please clarify the following:-
    1) Is there any impact on consolidation module if we did not maintain trading partner in GL master, vendor master & customer master
    Thanks & Regards
    D D Asnora

    HI
    It will effect in Interunit eliminations. and all the transaction which occured betweeen inter-units will be effected.
    regards
    Hari p

  • Different schema group for one vendor

    Dear all,
    We come across scenario,Where a vendor import material for us and at same time
    he also acts as a dealer.Here it requires two schema groups for a vendor.
    One possible solution is two different vendor codes for same vendor.
    Here i come across this answered link
    Vendor Schema group
    How to do it through partner functions ?
    or
    Any other solution for it ?
    Thanks
    Jeyakanthan

    Hi
    You can achieve this requirement by using vendor subrange. You can have morethen one subranges for same vendor. It will allow you to have more than one set of purchasing data in vendor master which includes schema group and terms of payment....etc.. You need to create vendor subranges from purchasing view in extra and in additional purchasing view.
    The below link wil help u to understand the Vendor subrange:
    http://help.sap.com/erp2005_ehp_04/helpdata/EN/e2/f3333956bd9f05e10000000a11402f/content.htm

  • How we create Schema group for every vendor?

    If we have multiple vendors/transporters, how you configure pricing procedure for each vendor what is the process of creating Schema group for every vendor?
    Thanks in advance
    Suresh

    hi suresh,
    you create Pricing procedure, and then you create Vendor schema group; and purchasing schea group.
    for your scenario you will create N number of vendor schema groups.
    follow this menu path:
    spro --> materials management --> purchasing --> conditions --> define price determination process --> Define schema determination --> define caluculation schema for standard purchase orders -->
    in that screen:
    you maintain entries in the combination of
    purchasing org schema group  -- vendor schema group -- pricing procedure.
    for your scenario, you maintain N number of vendor schema groups and assign it to procing procedure.
    hope this may help you,
    Regards
    srinivas

  • Vendor in Customer Master Record

    Hi,
    Need to make the tie between vendor and customer. I could not find any fields in the customer master record (XD01 / XD02 / XD03) for this purpose. Any suggestions?
    Thanks,
    Douglas

    The vendor link is located on the customer master in General Data --> Control Tab.  It is at the top under account control.  As the previous poster mentioned, if you are not seeing it is because it is supressed and you need to open it up through config.
    The config is located in the following area:  Financiall Accounting >Accounts Recivable / AP> Customer Accounts --> Master Data --> Prep for creating customer master data --> define account groups with screen layout
    Kind Regards,
    Jason

  • VENDOR and Customer master Authorization

    Hi Experts
    I have requirement about vendor & customer master authorization.client requirement is if  a user had created vendor  or customer under a purchase organization or sales organization so in this case other Purchase org users shouldn't see any details about this vendor and even they shouldn't be allowed to post to this invoices.even in FBL1N and FBL5N user shouldn't see other region vendor or customer line items.how to handle to this can any one help me on this.
    Thanks in advance
    Regards
    Diwa

    Hi,
    Just a thought;
    Why can't you create a user specific validation for FB60 or other t.codes if wanted, which says that;
    If the condition 'Vendor code starts with say 1* series', is met;
    then display an error message 'Posting not possible for this Vendor Group XXXX'
    This way, you can prevent certain users from posting transactions to a certain vendor groups.
    Thanks,
    Nirav

  • Account Group and partner functions in customer master records

    Hi Gurus,
    I need your help to confirm the following understand if correct:
    1. To create customer master record for partner function Ship-To, need to create a customer master record using the uniquely assigned account group for Ship-To , that is, 0002 . In this ship-to master record, define in its partner function tab, the other partner functions related to it. 
    2. To create the above, it cannot be achieved by just assigning the partner functions in the partner function tab of SOLD-To customer master record , created using account group 0001.
    Question:
    1. How does the system know or allow what codes a user can select (f4) or enter manually when defining in customer master record's partner function tab, the partner functions and their respective codes?
    How is this controlled? Is it by user authorization? or will user / sales administrator be able to select any codes tied to a partner function?
    2. Lets say there are 2 partner functions : Sales employee VE and 9E called Sales Representative. Both of these partner functions are of Partner Type PE.
    When defining in customer master record's partner function tab, how does the system know what codes is selectable for the administrator for each of these partner functions?
    best regards
    M Russo

    hi russo,
    this is to inform you that,
    1. yes you are right.
    2. you need to follow the steps as you said.
    Question:
    1. that you can find in the search basing on account group for partners.  that assignment we should know russo which SH to be assigned to which SP.  no need to have authorization for that, make a note of the list of SH and SP to be assigned that's all.
    yes, he will able to select any SH from the list but make sure that we assign the correct SH to the list of SP.
    2. that you will be defining it in Partner Determination Procedures.  at the time of CMR creation you have to select the correct code that will get populated in sales order.
    hope this clears your issue.
    balajia

  • Vendor in customer master

    Hi friends, this is shyam can you tell me what is the relevance of vendor tab in customer master and which scenario you use this
    regards
    shyam

    hello, friend.
    in some cases, your customer can also be your vendor.  you enter the vendor number here to establish a link.  this is to enable you to offset accounts receivable and accounts payable for this customer/vendor.
    regards.

  • Vendor and customer master creation

    Hello, for my client most of the time the same customer works as a vendor too. so they want to automate the creation of customer and vendor master records simultaneously. Basically the requirement is to enter the data for vendor master and use the same data to create customer master with out using 2 tcodes XD01, XK01 and enter the data in 2 places.
    Any suggestions are appriciated.
    Venu.

    Hi,
    If this is a manual entry, it is not possible with in SAP, they would have to use trwo different transactions.. Moreover the data cannot be same as they are opposites.
    You can add teh vendor # in the customer master and Customer # in the vendor master.. that's be all that you can do.
    even if you were to use LSMW or a Winshuttle to upload data, tehformat would still be different. so this is not possibel as far as I know

  • Field Control for Additional TAB in Customer Master

    Hi,
    Can anyboby please tell me that where is the field control for Additional Buttons example:"Custom Authorization Field" for customer master in ECC 6.
    As I can see only the General, Company, Sales field control in the Account Group.
    Thanks in advance.
    Best regards,
    Ipsit

    HI
    since this is an
    additional field, and is not contained in transaction OB20, it is not a
    field that can be controlled in conventional ways.
    My suggestion would be, to use SE51 (Screen Painter) to maintain the
    attributes for this field:
    se51
    Program         SAPLV02Z
    Screen number   0100
    Element List    Yes
    DISPLAY
    SELECT KNA1-KATR1   -   I/O
    CLICK on Attributes Button
    Here it is possible to set the input as requried.
    Regards,
    Ramana

  • No provisioning of User Group for authorization field in user master

    We are implementing CUP 5.3 workflows. Both in manual proviosing and automated provisioning based on User Defaults the user group gets only provisioned to the Groups tab in SU01. The field User Group for authorization on the Logon data tab remains empty (field CLASS from system table USLOGOND, filling CLASS field in table USR02).
    In User defaults both under user default as on the user group tab the user groups have been defined. In manual provisioning the correct list of user groups get displayed for selection.
    Under field mapping in the Application field I only find User Group in user master maintenance, but not User group for authorization. However I would assume I do not need to use field mapping, as I want to automate this provisioning based on user defaults.
    Am I missing a configuration setting here? If so, where can I set it?
    I would assume the provisioning of this field is possible. RAR reports the user group also based on the User group for auhtorization and not from the Groups tab.

    S.Pados,
    I can assure you that what I said in my last response does provision the User Group For Authorization Check on the Logon Data tab; in fact, I was having the opposite issue where the Group tab was not being provisioned; however, I am ruunning AE 5.2 and you said you are running 5.3; maybe something did change or got lost in the releases; it probably is good to see what SAP has to say about this; I would hate to lose this capapbility when I upgrade to AE 5.3
    As far as using the custom field for multiple applications, would that field not be usable for any of the applications you would select in the request form?; if you are using the same table names in the different SAP systems (selectable by the application field on the request) would the drop down selections be whatever the table has defined for that system? I may not be understanding something here so I am just asking;
    It would be great to have a Group field automatically filled in by another selection to avoid the user involvement; I agree with you there; because of our concerns on users entering the AE request, our shop has decided to continue with the users submitting the request through normal email and the security administrators perform the AE entering; this way we have a better idea on something like the GROUP field; we have an option to include the original email as an attachment for justification of the request
    Sorry I could not be of more help
    Jerry
    Ryerson,Inc.

  • Cin details in vendor and customer master

    Hi
    In my user id i am not getting the CIN details while using vendor and customer masters where as my coleague is getting these details while creating, displaying or editing the vendor and customer masters, please suggest regarding.
    Prakash

    SPRO -> Logistics General -> Tax on Goods Movement -> India -> Master Data -> Assign Users to Material Master Screen Sequence for Excise Duty.
    Select User Screen reference and add your username.

  • Badi method for knb1-atlkn in customer master in ECC 6.0

    Hi all,
    in ECC 6.0 .., customer master under company code data under account management  we have field named "Prev. acct no." ( KNB1-ALTKN ) .....I have to do some validations for that field ....can you ppl advise/suggest me the correct badi method for this purpose ???
    because the control is not stopped in save_data badi method....can u pls advise on the same??????
    pl. do th needful.
    thanks in advance
    jack

    tHANKS

Maybe you are looking for