Filter not being generated into where clause

Hi,
I have a simple mapping that has a source table, a filter, and a target table that is set to DELETE. The source table has many rows, but the filter would narrow down these rows by a lot. When I generate the code, the cursor that gets created SELECTs the whole table then there is an IF statement that is applied to each row with the filter condition. A lot less processing would be required if the filter was implemented as a WHERE clause in the cursor, but I can't get it to generate this way. I realize that deletes automatically generate row-based code but it would still be row-based if the WHERE clause was in the cursor.
Is there any way to get it to generate the filter as a WHERE clause in the cursor?

Hi,
In general, Warehouse Builder gives you a number of different operating modes:
- set-based: which does everything in (one) SQL statement. This method is most performant, but has some limitations. Warehouse Builder today does not support set-based deletes (arguably, deletes are not the most common operation in a data warehouse).
- row-based: which is optimal for debugging. In row-based mode, you get as many records as possible and all operations/transformations take place in PL/SQL. This option gives you most debugging capabilities.
- row-based bulk: which is the previous method fetching rows in bulk (e.g. 100 by 100). Bulk processing speeds up the overall processing.
- row-based target only: in this mode we push as many of the operations/transformations as possible into the query (cursor). I.e. your filter (in your case) would be implemented as a restriction on the filter.
- row-based target only in bulk: see previous.
Warehouse Builder's default operation is set-based fail over to row-based. I.e. because we do not support set-based delete statements, I suspect you fall back to the row-based method of execution, which is not ideal in your case. I suggest you use the row-based target only option in order to get optimal performance for your scenario.
Note that for the deletes that are common in DW scenarios the row-based bulk deletes that we generate are often faster than set-based deletes. Also note that if you perform a complete delete (or even truncate) followed by an insert that Warehouse Builder does issue one statement for emptying the table.
Thanks,
Mark.

Similar Messages

SWF File not being generated by compiler

I am using Flash Builder 4.5.
One of the modules that compiles without error is still not being bound into the runtime image (in this case debug).
There are no compiler errors (auto build is switched ON) but a swf file is not being generated.
I have tried removing the reference to the module in the Project ->Properties->Modules window and then adding it back in to no avail.
This was working up until I made a change to the module in question and then saved it.

I would check all imported images in the library. If you cannot see the image in your library preview; there is a good chance that there is an issue and it will need to be reimported.

Reports not being Generated

I use Crystal Reports with another program that supposed to generate 2 reports with a click of a button, but it is not working. The reports are not being generated. I installed Crystal Reports on my system twice and there doesn't seem to be a problem with the installation, but the program is not working. Please help.

I am fairly new at this so let me try my best to answer these questions:
Crystal Reports XI
Visual Studio? Not sure
No service pack applied. How and where do i get it?
I am using Windows XP
I am not viewing the reports as it has to be generated before i am able to view and the systems does nothing after I click the generate button
No have not tried to view a single report; i don't know how.
I have not used Crystal reports designer for anything else.
Edited by: Sharon Aird on Dec 1, 2008 5:05 PM

ADDM report not being generated

I noticed that addm reports are not being generated from last 2 days. So I did the following:
SQL> exec dbms_workload_repository.create_snapshot;
BEGIN dbms_workload_repository.create_snapshot; END;
ERROR at line 1:
ORA-13516: AWR Operation failed: only a subset of SQL can be issued
ORA-06512: at "SYS.DBMS_WORKLOAD_REPOSITORY", line 10
ORA-06512: at "SYS.DBMS_WORKLOAD_REPOSITORY", line 33
ORA-06512: at line 1
I got above error. I am not sure what that means. I also ran below SQL:
SQL> select nam.ksppinm name, val.KSPPSTVL, nam.ksppdesc description
2 from x$ksppi nam, x$ksppsv val
3 where nam.indx = val.indx and
4 nam.ksppinm = '_awr_restrict_mode'
5 order by 1
6 ;
awrrestrict_mode
FALSE
AWR Restrict Mode
What could be the reason that the reports are not being generated anymore

Check Note:308003.1 - AWR Snapshots Not Generating

Item in sales order not being picked into picking list

Hi Gurus,
Could you please tell me the possible reasons as why an item in the sales order which has enough stock not being picked into the picking list?
Many Thanks
Choudry

Hi
Delivery creation that is selection date is controlled by the schedule line of the line item in the sales order
Try by changing the schedule lines in sales order in VA02
there you try to change the delivery date to past
It might be possible if you had enough stocks at that time
Regards
Raja

BPM alert not being generated

Hi guys,
I'm having quite a little trouble in doing one thing which has been done for several times but which is giving me a hard time...
I've created a bpm process which in an error condition will trigger a simple alert.
I've tested the process and everything goes allright, except the alert. What is happening? Well, the alert is not being sent to my inbox. Why? Maybe because the alert is not being generated.
I've went to sxmb_moni_bpe and everything is OK. I can see the message of the alert being fired. After that I went to slg1 to see if my alert is being generated, and the answer is no. It's not being generated....
I've gone through Michal's blogs and everything was checked...The question is, if I execute RSALERTTEST with my alert category, the alert is generated and send to my inbox. Do you have any ideas?
Thanks a lot for your attention

Hi,
Yes the job scheduling is needed only for Sp14 and below.
Can you recheck if the Alert is actually getting triggered or not in the BPM in the control step? Make sure that you have given the correct Alert Category in your Control Step and also, make sure that the recipient in your alert as well as the Alert Inbox entry you are seeing is the same.
Finally, refresh the Alert Inbox.
Regards,
Bhavesh

Spool file not being generated in production server

Hello
Our end users are using automatic payment program F110 to print multiple cheques.
The settings in SPAD are identical in Quality and Production Server,but some how
spool file is not being generated in production.
Test printing is fine in Quality server.
Printer being used is Epson LQ 300.Device type is EPESCP2.
We are using z custom page size ,and it is assigned to printer device Type as well
Would be very great if some can can comment on which settings to check,as SPAD setting is
same in both server ,yet no spool.Very Very urgent.
Iam not sure ,whose domain is it now-BASIS or ABAP.
Thanks a lot
Nouman

If there is a problem with the spool, the variant that is being in F110 parameters.
As you are saying the quality system is working fine, please compare both the variants in Production and Quality systems.
This should solve your situation.

Notifications are not being generated for any emails that have rules applied to them.

Notifications are not being generated for any emails that have rules applied to them. Any clues how to fix this?

In System Center 2012 Operations Manager, the alert notification will be sent when the alert first meets all criteria, regardless of resolution state, unless resolution state itself is a criterion. If alert suppression is enabled for the rule or monitor
that raises an alert, only one notification will be sent when the subscription criteria are first met. No additional notifications will be sent until the alert is closed and a new alert is raised that meets all subscription criteria. PLease check
1) whether your rule has trun on alert supression
2) Close the alert, craised by rule, and do it again
Roger

TA1 Acknowledgement not being generated.

Hi All,
I have a requirement for the Inbound 820 to generate 999 and TA1 Acknowledgement. 999 is fine but TA1 is not being generated. I tried changing the ISA14 element to '1' from '0'(by referring http://docs.oracle.com/cd/E28280_01/user.1111/e10229/app_ta1.htm), but of no use. The ISA of the EDI file is as follows
(ISA*00* *00* *30*905454545 *30*805454545 *130315*0758*^*00501*100000174*1*T*\~). I am using B2B 11.1.1.6.
Please help me out with some suggestions.
Thanks in Advance!!
Edited by: soa999 on Apr 15, 2013 4:17 PM

I am using B2B 11.1.1.6.TA1 Ack feature has been introduced in PS6 (11.1.1.7). So please use PS6 (11.1.1.7) to get benefit of this feature. If you cannot use PS6 then raise a SR with support to check if you can get a patch on top of PS5 (11.1.1.6) to use this feature.
Regards,
Anuj

My jpg files from CR2 edits in CS6/CC are not being imported into LR5.

My jpg files from CR2 edits in CS6/CC are not being imported into LR5. Bridge and Explorer can see them ok. Tried to reimport but LR5 cant see them.
The file numbers are the same as original CR2 but have the jpg extension. TIFFS and PSDs seem ok. Can anybody help please?

how do I get all these files in my catalogue in the correct places cos they scattered around a bit
That's kind of a broad question ... and there are many different approaches ... so I will explain my approach, and other people can explain their approach.
My approach is to assign keywords and optionally captions and titles and other metadata to all of your photos, and use those to organize and search. Then, it doesn't matter what folders things are located in, if you want to see all your pictures of Chicago, you simply click on the arrow to the far right of the keyword Chicago. You don't have to remember what folders to look in, and this works even if the photos are scattered in a dozen different folders. In addition, since photos must be in one and only one folder, that limits your ability to organize; but you can assign as many keywords as you'd like to a photo, so a single photo can have keywords "Chicago" "Zoo" "Elephant" "Vacation" "Illinois" "United States" etc.

Generate a where clause with outer join criteria condition: (+)=

Hi,
In my search page, I use Auto Customization Criteria mode, and I build where clause by using get Criteria():
public void initSrpQuery(Dictionary[] dic, String userName) {
int dicSize = dic.length;
StringBuffer whereClause = new StringBuffer(100);
Vector parameters = new Vector(5);
int clauseCount = 0;
int bindCount = 1;
for(int i=0; i < dicSize; i++){
String itemName = (String)(dic.get(OAViewObject.CRITERIA_ITEM_NAME));
Object value = dic[i].get(OAViewObject.CRITERIA_VALUE);
String joinCondition = (String)dic[i].get(OAViewObject.CRITERIA_JOIN_CONDITION);
String criteriaCondition = (String)dic[i].get(OAViewObject.CRITERIA_CONDITION);
String criteriaDataType = (String)dic[i].get(OAViewObject.CRITERIA_DATATYPE);
String viewAttributename = (String)dic[i].get(OAViewObject.CRITERIA_VIEW_ATTRIBUTE_NAME);
String columnName = findAttributeDef(viewAttributename).getColumnNameForQuery();
if((value != null) /*&& (!("".equals((String).trim())))*/){
if(clauseCount > 0){
whereClause.append(" AND ");
whereClause.append(columnName + " " + criteriaCondition + " :");
whereClause.append(++bindCount);
parameters.addElement(value);
clauseCount++;
If I want to generate following where clause:
select
,emp.name
,emp.email
,emp.salesrep_number
,comp.name
,gs.srp_goal_header_id
,gs.status_code
,gs.start_date
,gs.end_date
from g2c_goal_shr_emp_assignments_v emp
,jtf_rs_salesreps rs
,xxg2c_srp_goal_headers_all gs
,cn_comp_plans_all comp
where 1 = 1
and rs.salesrep_id = gs.salesrep_id (+)
and gs.comp_plan_id = comp.comp_plan_id (+)
and gs.period_year (+) = :1 -- :1 p_fiscal_year
How can I generate a where clause with outer join : gs.period_year (+) = :1 ? Will I get '(+)=' from get(OAViewObject.CRITERIA_CONDITION)?
thanks
Lei

If you are using SQL-Plus or Reports you can use lexical parameters like:
SELECT * FROM emp &condition;
When you run the query it will ask for value of condition and you can enter what every you want. Here is a really fun query:
SELECT &columns FROM &tables &condition;
But if you are using Forms. Then you have to change the condition by SET_BLOCK_PROPERTY.
Best of luck!

My image is not being fed into my podcasts.

Everything about my image is okay. Why is it not being fed into my podcasts?

That depends on how you are making your feed; presumably you aren't hand-writing it (if you are you can simply remove the return). A program or service creating a feed shouldn't introduce the line return - all I can suggest is looking closely into the program and perhaps trying to contact their Support.

Default Personnel No. Ranges not being generated through NUMKR

Default personnel number ranges according to the company / client are not being generated. what should I do further to fix the problem?

Hi first go to PA04 and maintain the different number ranges as stated above.
01 1 to 2000
02 2001 to 5000 etc
here 01, 02 are different number ranges.
In your case maintain a number range number 6 with a range as per your requirement.
Then go to PE03 NUMKR feature.
Create subnodes using Personnel Area with a return value as the number range number.
So in you case decision tree should look like should look like
NUMKR
WERKS
GUJ1 ( PA for Gujraat)
06 ( return value = number range number )
Hope this helps.
Ajay

Document Category not being generated Automatically for AR transaction type

Hi,
we have defined some transaction type in AR. But the corresponding document category is not being automatically generated
Kindly help

This doesn't look feasible, the only issue I ever encountered with this was the document category not being updated if the transaction type was updated. Maybe the customer has some custom triggers which are preventing the record from being inserted into FND tables. You can easily debug this by opening the form and testing in a TEST environment.

Domain constraint not being generated

Hello,
I have a case where a logical model was reverse engineered from a database, along with the constraints. Now domains have been created to represent those constraints and the columns on the entities have been updated to reflect these domains, and the reverse engineered check constraint removed.
The problem now is that when I generate a relational model, the column check constraints are not always generated. even though the "use domain constraints" flag is checked on the relevant attributes. On the relational model the flag is also checked, but the DDL preview, and the generated DDL script do not reflect the column check constraint.
In some cases, it appeared to be because the attribute also had a check constraint name the presence of which appeared to override the "use domain constraints" flag. In some cases, removing the reverse engineered constraint name and regenerating the relational model solved the problem, but in other instances the column check constraint is simply not generated when the DDL is previewed, even though everything appears ok on both the logical and relational models.
Has anyone experienced this before, and is there a solution?
Thank you
Femi
Edited by: fakintoye on Feb 9, 2012 5:30 PM
I started the process with DM 3.0 665, but even with DM 3.1 700 the same thing happens

Hello Femi,
A few points to add:
1. If the Constraint Name property is not set on the Column, the Check Constraint is generated in the CREATE TABLE statement, but (in Data Modeler version 3.0) if the Constraint Name property is set on the Column, the Check Constraint is generated in a separate ALTER TABLE statement.
2. Data Modeler version 3.1 has a new option in the Data Modeler/DDL section of the Preferences (on the Tools menu). If the new "Generate Inline Column Check Constraints" option is set, the Check Constraint is always generated in the CREATE TABLE statement.
3. The bug I mentioned previously also applies to Lists of Values and Ranges. Forward Engineering into an existing Relational Model can remove the Lists of Values and Ranges from the referenced Domain definitions when the Attributes/Columns have the "Use Domain Constraints" option set.
This bug can be avoided either
a) by Forward Engineering into a new Relational Model (but this would mean losing any other details held in the Relational Model and its Physical Model), or
b) In the Engineer to Relational Model dialog, examine the entry for each Column, and where the property "Check Constraint", "Range Constraint" or "LOV Constraint" is in red (because the new value is different from the old value), remove the tick from the "Selected" column for this property. Then use the Engineer button to complete the process.
Provided the Lists of Values are present on the Domain and the Column has the "Use Domain Constraints" option set, the Check Constraint should appear in either the CREATE TABLE statement or a separate ALTER TABLE statement.
Hope this helps,
David

Filter not being generated into where clause

Similar Messages

Maybe you are looking for