Filter Qualified Link Checkbox set for tuples, But syndicated all Recs

Hello MDM Gurus,
With Reference to the answer below.. we have tuples and we are doing the same, but still we are getting all three links in the syndicated file.
I have tested this using flat syndication file.
Original Thread
Hello all!
Here is an issue we are working on. We would like to syndicate entries from a qualified lookup table for a particular customer, but only those where a certain qualifier has a specific value. For example:
Qual Table:
Non-Qual1; Non-Qual2; Qualifier.
Entries:
"AA", "123", "Yes"
"BB", "123", "No"
"CC", "456", "Yes"
So, when I syndicate this customer record, I would only like to syndicate those entries where the Qualifer = "Yes".
"Supress Unchanged Records" only works on the whole customer record and if the Search Criteria is set for "Qualifer = "YES", then it chooses the record (correctly), but syndicates all entries from the table.
Answer
Try using
Filter Qualified Links in the Map Properties of the Syndicator.
If activated, syndication results contain only the data selected in the Selection Pane.
Tick the check box under the Value Column for that property. By default that check box is not selected. You have to check it.
This works similar to the 'Filter' check box of the MDM Data Manger.
Limitation as of SP04
- One Global setting per map for qualified links plus one global setting per map for multi-valued lookups.
Please help us to resolve this issue. your input will be highly appreciated.
Thanks in Advance.

I need to synidate all customer records regardless of contacts linked to the customer.
A customer can have one to many contacts. There are several contact functions such as Primary, Sold To, Owner, etc.
When I syndicate the customer, I need to syndicate all Customer main table data and include Contact data only if the Contacts function = Primary, otherwise the contact data should be null in the syndiation.
A customer may have no contacts --> Syndicate Customer main table data, contact data is null
A customer may have theee contacts: 1 = primary, 2 = ship to, 3 = owner --> Syndicate Customer main table data and Primary contact data
A customer may have two contacts: 1 = ship to, 2 = owner --> Syndicate Customer main table data, contact data is null (since no Primary contact exists)
I hope this clarifies the requirement.
thanks
Tammi

Similar Messages

My spreadsheet is set for landscape but shows portrait in "print view". How do I fix this?

My spreadsheet in Numbers is set for landscape but appears as portrait in "print view". What am I doing wrong?

Where are you seeing "print view?" Using the little paper icon at the bottom left of your document turns print view on & off & that is also where you can set portrait or landscape. The default is landscape.

Can I undo "Erase mac" setting for Stolen, but returned devices??

Can I undo "Erase mac" setting for Stolen, but returned devices?? Laptop bag with MacBook Pro, iPad and Android Tablet were stolen at a tradeshow last week - so I found the ERASE setting thru iCloud - NOW the devices are all FOUND and being shipped back to me. (HORRAY!!) But, is there a way to UNDO the Erase setting that I clicked on?

Hello there, sunny_and72.
Great news on finding your lost devices! That has got to be a major relief. The following Knowledge Base article offers the possible ways of restoring your data onto your devices after an erase has been performed:
iCloud: Erase your device
If you erase then find your iOS device, you can restore the information on the device using iCloud Backup (if backup was turned on before you erased it) or iTunes. For more information, see iCloud storage and backup overview, or the Safety, Handling & Support section of the iOS 8 user guide for your iPhone, iPad, or iPod touch. If your device has iOS 7 or earlier, get the user guide from the Apple Support website.
If you erase then find your Mac, you can restore the information on the Mac using a Time Machine backup. For more information, see the Apple Support article Recover your entire system. If you set an EFI firmware password on your Mac before it was lost, then erase it and later find it, you may need to take your Mac to an authorized repair center to unlock it before you can use it again.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Album Art works for most, but not all

I was reading previous forums on the subject, but no clear answer was given..
The album art shows up fine in itunes and my library and works for most of my music on my ipod, but how come some album's art does appear? I have it set manually and select 'Get Info' then 'Artwork' and add it from there, then drag in the finished product to my ipod. I've been doing that and it works fine for most of the albums, but every so often, the album art will not appear on my ipod. Am I doing something wrong? I take them all from the same source (amazon.com) but it makes no sense to me how some randomly don't appear.
I tried deleting the artwork and re-adding it, but nothing happened again. If you could answer why it works for most but not all or how I can get the album art to appear for the ones it will not by re-doing something, it would be appreciated. thanks.

I encountered the same problem in the beginning. When I compared the size of the original images, the working ones seemed to be smaller in general, so I reduced the size of all covers I intended to upload on the pod to 300x300 pixels.
This seemed to work - for 2 days. I bought the pod on friday, had pictures on sunday, but on Monday (after the first time the pod was fully discharged) none were left left.
So I ended searching this forum for related problems...
And decided to join my problem to this entry.

I am batch processing in PS 2014 (watermark and saving as jpeg from ps file). I get the message for some but not all 'this file needs to be saved as a copy with this option'. And then I have to save it manually. Does anyone know why this happens? (It is j

I am batch processing in PS 2014 (watermark and saving as jpeg from ps file). I get the message for some but not all 'this file needs to be saved as a copy with this option'. And then I have to save it manually. Does anyone know why this happens? (It is just a plain photoshop file, a watermark is added, then save as jpeg - the jpeg is saved to a different folder than the original photoshop file.) It happens for about 10 of 30/40 files approximately . Thank you, Kathryn

I believe I have figured it out - I need to flatten the image, even though there are no layers except for layer 0, first.

I already have flashplayer on my mac. I have been using online video tutorials for learning, but suddenly all my YouTube vodeos say "plug-in blocked". I follow the instructions for installing or updating, but nothing has helped. I have looked everywhere i

I already have flashplayer on my mac. I have been using online video tutorials for learning, but suddenly all my YouTube vodeos say "plug-in blocked". I follow the instructions for installing or updating, but nothing has helped. I have looked everywhere in Safari help with no success. How can I restore this plug-in, PLEASE?
Austin Moore
Knoxville, Tennessee

I already have flashplayer on my mac. I have been using online video tutorials for learning, but suddenly all my YouTube vodeos say "plug-in blocked". I follow the instructions for installing or updating, but nothing has helped. I have looked everywhere in Safari help with no success. How can I restore this plug-in, PLEASE?
Austin Moore
Knoxville, Tennessee

In system preferences my search engine and homepage are set for google but my computer keeps using BING, please help!

I have system preferences > general > homepage and search engine set as google but my computer keeps using BING! Please help!

You installed the "Genieo/InstallMac" rootkit. The product is a fraud, and the developer knowingly distributes an uninstaller that doesn't work. I suggest the tedious procedure below to disable Genieo. This procedure may leave a few small files behind, but it will permanently deactivate the rootkit (as long as you never reinstall it.)
Malware is constantly changing to get around the defenses against it. The instructions in this comment are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
Back up all data. You must know how to restore from a backup even if the system becomes unbootable. If you don't know how to do that, or if you don't have any backups, stop here and ask for guidance.
Step 1
In the Applications folder, there should be an item named "Genieo". Select it and open the Finder Info window. If it shows that the Version is less than 2.0, download and install the current version from the genieo.com website. This may seem paradoxical, since the goal is to remove it, but you'll be saving yourself some trouble as well as the risk of putting the system in an unusable state.
There should be another application in the same folder named "Uninstall Genieo". After updating Genieo, if necessary, launch "Uninstall Genieo" and follow the prompts to remove the "newspaper-style home page." Restart the computer.
This step does not completely inactivate Genieo.
Step 2
Don't take this step unless you completed Step 1, including the restart, without any error messages. If you couldn't complete Step 1, stop here and ask for instructions.
Triple-click anywhere in the line below on this page to select it:
/Library/Frameworks/GenieoExtra.framework
Right-click or control-click the line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.
If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
A folder should open with an item named "GenieoExtra.framework" selected. Move that item to the Trash. You'll be prompted for your administrator password.
Move each of these items to the Trash in the same way:
/Library/LaunchAgents/com.genieo.completer.update.plist
/Library/LaunchAgents/com.genieo.engine.plist
/Library/LaunchAgents/com.genieoinnovation.macextension.plist
/Library/LaunchDaemons/com.genieoinnovation.macextension.client.plist
/Library/PrivilegedHelperTools/com.genieoinnovation.macextension.client
/usr/lib/libgenkit.dylib/usr/lib/libgenkitsa.dylib
/usr/lib/libimckit.dylib
/usr/lib/libimckitsa.dylib~/Library/Application Support/com.genieoinnovation.Installer~/Library/LaunchAgents/com.genieo.completer.download.plist
~/Library/LaunchAgents/com.genieo.completer.update.plist
If there are other items with a name that includes "Genieo" or "genieo" alongside any of those listed above, move them as well. There's no need to restart after each one. Some of these items will be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
Restart and empty the Trash. Don't try to empty the Trash until you have restarted.
Step 3
From the Safari menu bar, select
Safari ▹ Preferences... ▹ Extensions
Uninstall any extensions you don't know you need, including ones called "Genieo" or "Omnibar," and any that have the word "Spigot" or "InstallMac" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
Your web browser(s) should now be working, and you should be able to reset the home page and search engine. If not, stop here and post your results.
Make sure you don't repeat the mistake that led you to install this software. Chances are you got it from an Internet cesspit such as "Softonic" or "CNET Download." Never visit either of those sites again. You might also have downloaded it from an ad in a page on some other site. The ad has a large green button labeled "Download" or "Download Now" in white letters. The button is designed to confuse people who intend to download something else on the same page. If youever download a file that isn't obviously what you expected, delete it immediately.
You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that the Genieo developer has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing, has not done so, even though it's aware of the problem. It must be said that this failure of oversight is inexcusable and has seriously compromised the value of Gatekeeper and the Developer ID program. You cannot rely on Gatekeeper alone to protect you from harmful software.
Finally, be forewarned that when Genieo is mentioned on this site, the developer sometimes shows up under the name "Genieo support." If that happens, don't believe anything he says, but feel free to tell him what you think of his scam.

Email Alerts are working for some but not all users

If some users are getting the alerts and some not, it seems more likely that the issue is with your email server or email clients, not with your SW setup.
Have you checked SPAM / Junk folders on the server and on the clients?

We have alerts setup for multiple scenarios. All of our users are setup the same but not everyone is getting the alert. We are using the spiceworks mail servers and I have checked the Spiceworks App Notifications are set to Yes. Any ideas?
This topic first appeared in the Spiceworks Community

Officejet 6500A Plus Suddenly only prints red for most but not all occasions.

In the middle of printing a report it switched to RED ink. I bought and replaced black cartridge... though it still had ink. (NO SUCCESS) It prints BLACK for copies, for documents on Pages (I Mac) and from wife's laptop that is connected. SOMETIMES IT PRINTS BLACK when I click on PDF and Print.... but not all the time. It ALWAYS PRINTS RED when I print an e mail. No TROUBLESHOOTING suggestions seem to fit this irregular problem

PDF's are typically send to the printer as graphics, which may cause them to be printed with the color cartridge rather than black. If your cyan cartridge is low (or not working) the print will appear red. To address cyan not printing properly the document here may help.
Depending on your OS you may be able to set the printer to print in Grayscale and Black ink only.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Ability to perform ALTER SESSION SET SQL TRACE but not all alter clauses

I see that in order to run the ALTER SESSION SET SQL TRACE command, the user should be explicitly granted alter session privilege as the CREATE SESSION privilege alone is not enough. Is there a way to grant the ability to perform ALTER SESSION SET SQL TRACE but not the other clauses such as GUARD, PARALLEL & RESUMABLE?.
Thanks
Sathya

If you are using Oracle 10g and above, you can use DBMS_SESSION.session_trace_enable procedure,
it doesn't require alter session system privilege.
Simple example:
SQL> connect test/test@//192.168.1.2:1521/xe
Connected.
SQL> alter session set tracefile_identifier='my_id';
Session altered.
SQL> alter session set sql_trace = true
2 ;
alter session set sql_trace = true
ERROR at line 1:
ORA-01031: insufficient privileges
SQL> execute dbms_session.session_trace_enable;
PL/SQL procedure successfully completed.
SQL> select * from user_sys_privs;
USERNAME                 PRIVILEGE                    ADM
TEST                      CREATE PROCEDURE                NO
TEST                      CREATE TABLE                    NO
TEST                      CREATE SEQUENCE                    NO
TEST                      CREATE TRIGGER                    NO
TEST                      SELECT ANY DICTIONARY               NO
TEST                      CREATE SYNONYM                    NO
TEST                      UNLIMITED TABLESPACE               NO
7 rows selected.
SQL> execute dbms_session.session_trace_disable;
PL/SQL procedure successfully completed.
SQL> disconnect
Disconnected from Oracle Database 10g Release 10.2.0.1.0 - Productionand here is result from tkprof:
TKPROF: Release 10.2.0.1.0 - Production on So Paź 23 00:53:07 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Trace file: xe_ora_176_my_id.trc
( ---- cut ---- )
select *
from
user_sys_privs
call     count       cpu    elapsed       disk      query    current        rows
Parse        1      0.08       0.08          0          0          0           0
Execute      1      0.00       0.00          0          0          0           0
Fetch        2      0.01       0.01          0         15          0           7
total        4      0.09       0.09          0         15          0           7
Misses in library cache during parse: 1
Optimizer mode: ALL_ROWS
Parsing user id: 61
Rows     Row Source Operation
      7 HASH GROUP BY (cr=15 pr=0 pw=0 time=11494 us)
      7   CONCATENATION (cr=15 pr=0 pw=0 time=4913 us)
      0    MERGE JOIN CARTESIAN (cr=4 pr=0 pw=0 time=1169 us)
      0     NESTED LOOPS (cr=4 pr=0 pw=0 time=793 us)
      0      TABLE ACCESS FULL SYSAUTH$ (cr=4 pr=0 pw=0 time=592 us)
      0      INDEX RANGE SCAN I_SYSTEM_PRIVILEGE_MAP (cr=0 pr=0 pw=0 time=0 us)(object id 312)
      0     BUFFER SORT (cr=0 pr=0 pw=0 time=0 us)
      0      TABLE ACCESS FULL USER$ (cr=0 pr=0 pw=0 time=0 us)
      7    NESTED LOOPS (cr=11 pr=0 pw=0 time=3429 us)
      9     HASH JOIN (cr=9 pr=0 pw=0 time=2705 us)
      9      TABLE ACCESS FULL SYSAUTH$ (cr=4 pr=0 pw=0 time=512 us)
     63      TABLE ACCESS FULL USER$ (cr=5 pr=0 pw=0 time=914 us)
      7     INDEX RANGE SCAN I_SYSTEM_PRIVILEGE_MAP (cr=2 pr=0 pw=0 time=510 us)(object id 312)
Elapsed times include waiting on following events:
Event waited on                             Times   Max. Wait Total Waited
----------------------------------------   Waited ---------- ------------
SQL*Net message to client                       2        0.00          0.00
SQL*Net message from client                     2       20.64         20.65
BEGIN dbms_session.session_trace_disable; END;
call     count       cpu    elapsed       disk      query    current        rows
Parse        1      0.01       0.00          0          0          0           0
Execute      1      0.00       0.00          0          0          0           1
Fetch        0      0.00       0.00          0          0          0           0
total        2      0.01       0.00          0          0          0           1
Misses in library cache during parse: 1
Optimizer mode: ALL_ROWS
Parsing user id: 61

Linked server works for sa but not for user

I have a linked server to an Oracle database. It works fine for me logged in as DBA but not for the user. The linked server uses the same account regardless of who's using it.
When the user tries it the following error is thrown:
Cannot initialize the data source object of OLE DB provider "OraOLEDB.Oracle" for linked server
I have granted public access to MSDB and execute on the xp_prop_oledb_provider object to the user.

this link should give all the connection string to sql server
http://www.connectionstrings.com/sql-server/
but can you verify if your application is really using that connection file ? try running trace alongside and try to connect to the database.. so do you atleast see a call from this config file with username - myapplication??
Hope it Helps!!

Enhancement idea: checkbox setting for how to import keywords.

I just duplicated a bunch keywords upon importing a month worth of photos from a remote project. I assume this is because LR has no idea how to handle them other than importing them in a flattened state. I suggest a checkbox that tells LR whether or not to look for an existing keyword of the same spelling in its structures before creating another one. If it then finds multiples, it would be easy enough for it to figure out the correct keyword based on context.
I have many nested keywords and have found the nesting to be pretty much useless in the real world, but it is a great organizational tool. It allows about the same grouping functionality as collections but without the messy accumulation of collection names that were only used once.

kwdaves wrote:
Have you tried duplicating your "home" keyword list in your "field" catalog? I do quite a lot of this sort of thing and it helps me avoid duplicating keywords when I import from my "field" catalog into my "home" catalog. For example, when I add the keyword "Cades Cove" to an image in my field catalog, it goes in the hierarchical keyword "Places/National Parks/Smoky Mtn NP/Cades Cove" in my field catalog and, when I import from the field catalog into my home catalog, it shows up in my home catalog properly.
No, but you just gave me another similar idea: Instead completely wiping the portable drive after each trip (after importing the images and history steps to the desktop), I will keep the same catalog after using it to clear the old images from the drive. I'm pretty sure the keywords will then be around for the next trip, along with the other things I had to copy over, like the user presets and profiles.
Thanks!

Help Me..iTunes has allowed password set for volume, but password wont work

I just received my iPod Shuffle yesterday. iTunes 7, allowed me to set a password for my iPod Shuffle (for volume control), but the password wont work, yikes.... It's the same password I always use. The volume is so low, I can barely hear it. I uninstalled iTunes and reinstalled it, but my iPod still remembered its password, I tried the Restore under settings in iTunes... no luck.
The error message I get when I try to restore is (same as when I try to access the iTunes Store, which I cannot access either):
ITunes could not connect to the iTunes Store. The network connection timed out.
Make sure your network settings are correct and your network connections active, then try again.
I have cable access to the internet, and that's just fine. I've tried to use the command line to run ipconfig / (I forgot what it said to type after the slash), but I did this twice and it was successful.
I checked my firewall for exceptions, and iTunes is one, so that should be alright. Maybe it's the McAfee Security Center
I would really appreciate any help that you might have to offer.
Thanks!
Sky

Here was the problem:
I found out that I had two firewalls up! I would think that wouldn't be possible. Both Windows and Symantec firewalls. Once my friend took down the Windows one, she was able to restore the ipod shuffle to factory settings and go to the ITunes Store. I'm too chicken to apply a password on it again.
Before my friend helped me, I called the 1-800 help line (in India, 9 hours ahead of us, and I think it was after mid-night-but I could not tell I woke her up, I felt bad) and she had me try a few things and I forgot to get her help on putting everything back. But I did sort of write down the changes and was able to retrace and return it to what the PC was.
I just wanted to share this in case anyone else does this.

Ipod set for windows but i have a mac

i just bought a new 30g black ipod to upgrade fomr my old ipod. I plug it in to register and I keep getting an error message that i cant register it. In my summary page of the ipod its says its formatted for windows. The reset option is grayed out. Any Ideas are greatly appreciated. thanks!

I got the same problem, which I still have no resolved. Here are some links that may help you.
http://docs.info.apple.com/article.html?artnum=303187
http://discussions.apple.com/thread.jspa?threadID=896470&tstart=90
http://discussions.apple.com/thread.jspa?threadID=915410&tstart=0
I went to the "genius" bar today and did a Restore on a MAC at the store but it still does not work. Archive & Install may be my only option. Post back if you are able to fix yours.
Cheers

Fonts in things like Help are way to small. I have Firefox set for size24 but Help and lots of other things show up in say a size 12. How do I correct this. I can barely read this help screen.

No other details. It is all in the question.

No other details. It is all in the question.

Filter Qualified Link Checkbox set for tuples, But syndicated all Recs

Similar Messages

Maybe you are looking for