Filtering Problem

Hi. I have developed a screen and in the screen i have used the <h:SelectOneMenu> component. I am getting values from the database and populating the values in the dropdown. I have to provide a feature for that component such that if i type 0 all values starting only with 0 should be displayed in the dropdown list. and it is the same for all the digits. Can someone please help me and provide me a javascript code to implement this feature .
I have already applied the feature shown by Frank Nimphius for the selectonechoice component in the underlying example,
http://thepeninsulasedge.com/frank_nimphius/2007/09/14/adf-faces-how-to-smart-filter-the-afselectonechoice-with-javascript/
When i use code used in the example that is given then the problem is that the page slows down considerably. A query that is to be executed in 2-3 seconds takes about 30-40 seconds to execute. So i had to remove the code that had been implemented as in the example given here. Can u please provide a code to me for doing this in a h:SelectOneMenu component. Please help me as this feature has to be implemented in my project. Thanks in advance.

Hi,
the code should work similar with h:SelectOnemenu because it purely is a client side DOM manipulation. Note that a possible performance problem may be caused for long lists by the JavaScript objects that are created to build the search list. This however should go to the extend you describe
Frank

Similar Messages

HP Deskjet 3050A ALL-IN-ONE J611 series ---- mac filtering problem

i have a HP Deskjet 3050A ALL-IN-ONE J611 and i cannot get my printer to connect wireless. Everytime I try to connect it it always tells me an error. The error says:
Issue: MAC address filtering may be enabled on your wireless router.
Solution: If MAC address filtering is enabled on your router you should disable it.
The thing is i checked my router to make sure the MAC filtering was not enabled and it wasn't. So why does my printer keep telling me this? if i can get passed this problem i think it would connect. The MAC address is already stored in the router.
[edited image by Moderator]

Hi skhjr,
Welcome to the HP Forums.
I see that you are having an issue getting the printer to connect over the wireless network.
So I can better assist you, please respond with which Operating System you are running:
Which Windows Operating System am I running?
Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
Please write me back when you have time and I will be happy to help.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

E1200 - Ports not working and mac filtering problem

If there was a way to give negative stars to this router, I would. As it is, the minimum rating I can give this product is one star, and that's one star too many.
I was upgrading from the WRT54G, which is an ugly thing to look at, but a reliable workhorse nonetheless. I turned that in to a downstream switch in my comms hub.
On the E1200, I flashed the latest firmware, used different Cat5 cables, and different laptops before committing to hating this product.
The first time I reached out to Amazon, the Amazon rep gave me a Cisco number to call. Turns out, that's some shady mortgage refinance hotline. Try it for yourself! 1-800-666-1771.
Now, the rant -
1. Two out of four wired LAN ports don't work: What can be the fix for this?! The activity lights on ports 3 and 4 blink and suggest data transfer is taking place, but the wired laptop simply can't acquire an IP address and access the internet. Same result when I connect my Panasonic Blu-Ray player to ports 3 and 4. None of the Viera Cast features load.
2. MAC filtering unreliable: The wireless routing works somewhat reliably, if and only if, one settles for the most basic security. If I only choose a password and WPA2 protocol, things work fine. If I add another layer of security (in my case, enabling MAC filtering and only PERMITTING gateway to listed MAC IDs), things break down. As soon as I disable MAC filtering, wireless access to authenticated clients is restored.
3. Cisco customer service: The censored world we live in, compels me to criticize politely. TERRIBLE. Cisco website is unintuitive, and frustrating. There's no easy way to register your purchased product. The Cisco "registration" is intentionally misleading and deceptive. For all intents and purposes, it's just an information gathering tool for Cisco. Don't bother registering there, unless you love the idea of storing your personal information on their servers. Their phone-based customer service is apathetic and uninterested. My rep was so distrusting of my intelligence and motor control, that he simply wouldn't believe that I had selected "PERMIT" and not "PREVENT" as the option under MAC filtering. After he asked me the same question for the fourth time, I raised my voice, and he gave up the idea of checking for the fifth time.
However, this review is a tale of two companies. I reached out to Amazon again. This time, I got a rockstar in the shape of Leanne C! She was incredibly helpful, and understanding. What's more, she set up my return without any hassle and this Cisco dud is on its way back. I'm a big fan of Leanne's and my confidence in Amazon is restored.
I'm sure that i received a lemon. I've never had problems with Linksys products. Maybe others' experience is different from mine.

In your case as port numbers 1 and 2 does not work, what you could have done a loop back test. To perform a loop back test you need to take an ethernet cable, connect one end of that cable to internet port and the other end to the non-working port on the router. If you get the led to glow on both internet and the respective ethernet port that indicates that the port is working fine.
It could also be a sychronization issue between the above mentioned lan ports and the lan card of your computer. As a part of trouble shooting you can try to reduce the card speed of your lan card. Following are the steps to reduce the speed of your lan card.
START--> right-click My Network Places and click Properties
right-click on the device manager and click properties
Click on the CONFIGURE button
Select the ADVANCED tab and in the box under the header property select "speed and duplex" and change the value on the right to 10 mbps half duplex. A restart would be recommended after performing these steps.
In the second half you said that after enabling the mac filter option the internet breaks down. Here, do you mean to say that the computer
gets disconnected from the wireless network or it stays connected with a valid IP address but without an internet connection.
Well, it is an unusual issue however you could have reset and reconfigure the router as you got the latest firmware upgraded on it.
Steps to reset the router:
Push the reset button on router for 30 seconds, turn off the router wait for 30 seconds and then power it on. Power light should blink when you perform the reset process.

Numbers filtering problem

Hi guys,
I have a problem with numbers' filtering function here.
1. I have a table of about 150 rows and 6 columns.
2. The data consists about 42 categories and I wish to sort out each item.
3. when I chose the column and try to filter the table, I found there list only about 22 items on the pop-up list.
where are those missing items ?
Could someone help me with this?
Mike

2. The data consists about 42 categories and I wish to sort out each item.
3. when I chose the column and try to filter the table, I found there list only about 22 items on the pop-up list.
Though the pop-up (or drop-down or whatever it's called) list maxes out at only 22 or so items, you can work with larger numbers in the Sort & Filter panel at the right.
SG

The Contact List bug/ph number filtering problem f...

Hi im facing a problem with my nokia N95 8gb. the problem is Contact list related.
such as
I have stored a number is like 01920803355 in my contact list.and the number has saved as "Enderson". But if i dialed a number like 01930803355 then its show Enderson during calling/Incoming.though the number 01930803355 has not saved in my phone/sim at all. I thing its a number/name filtering bug for N95 8gb. beacuse here in this two numbers 10 digit same and only one digit is different. but the phone does not recoginize.
Plz Nokia Check it out......

it is actually a feature more than a problem ... and this is not limited to N95 8GB ... I think almost all nokia phones will have the same problem .. Nokia phones compare the last 7 digits of a number and ignore the first digits ... so if there is two different numbers that have the same last 7 digits, your phone will assume it is the same number... I think the idea behind this feature is to ignore the international code so if you dial a number with or without the international code it will be the same name ...
but in your case, you suffered from the over-smart of this feature
Message Edited by fhd4 on 21-May-2008 02:49 PM

ALV filters problem

Hi All,
i have problem in ALV GRID. On my ALV output i have VBAK-VBELN. when i click on filters, and if i provide vbeln as '106789' instead of '0000106789' the output is not displayed. please let me know how to solve this problem.
if i provide 106789, the output must be displayed.
Thank you all in advance.

Hello,
set ST_FIELDCAT-OUTPUTLEN to the actual lenght of the field.
regards,
Naimesh

Final cut pro 4 audio filters problem

Hi,
I know there are a lot of discussions about this on these forums, but I can't find the solution.
Here's my problem:
I have installed FCP 4 and a USB mixer connected to my Powermac G5 (early 2005). When I start up FCP with the external mixer connected it crashes when loading audio filters, but when I disconnect the mixer it starts up just fine. Here's some info about my powermac:
Model: PowerMac7,3, BootROM 5.2.4f1, 2 processors, PowerPC G5 (3.0), 2.3 GHz, 2.5 GB
Graphics: ATI Radeon 9600, ATY,RV351, AGP, 128 MB
Memory Module: DIMM0/J11, 256 MB, DDR SDRAM, PC3200U-30330
Memory Module: DIMM1/J12, 256 MB, DDR SDRAM, PC3200U-30330
Memory Module: DIMM2/J13, 1 GB, DDR SDRAM, PC3200U-30330
Memory Module: DIMM3/J14, 1 GB, DDR SDRAM, PC3200U-30330
Network Service: Ethernet (integriert), Ethernet, en0
Serial ATA Device: Maxtor 6B250S0, 233.76 GB
Parallel ATA Device: PIONEER DVD-RW DVR-109
USB Device: USB Keyboard, Logitech, Up to 1.5 Mb/sec, 500 mA
USB Device: USB Optical Mouse, Logitech, Up to 1.5 Mb/sec, 500 mA
USB Device: USB Audio CODEC, Burr-Brown from TI, Up to 12 Mb/sec, 500 mA
The last USB Device is the external mixer. Its a Numark M6 usb mixer
Thanks in advance
Fabian

Oh, too bad. But thanks anyways.
Fabian

WBS Element filtering problem

Hi All,
We have one Z report, in this report project no and WBS elements are displaying properly. But when i am going to filter option it is showing object no. please give me any suggestion in filter option it has properly instead of object no.
Eg.
Project no. in Report output -
> 5986-FGSDT-2009
Project No. in Filter option -
> 00069845 when filtering is showing like this.
here in filter option also i want show as per output.
Thanks in advance.

Hi All,
Got the solution from the below thread and problem solved also.
http://scn.sap.com/thread/1917750
Many thanks to Uma Naik.
Thanks,
Amit

More filtering problems

Greetings,
Yesterday, I posted a problem with finding an invisible filter. Many thanks to those who helped.
Today, I have another filter problem. While searching, I noticed the same problem I had with an invisible filter, but this time when I implement the fix (i.e., open a filter HUD for a smart album, then click on the Photos item in the library) there is not an invisible filter, but rather the filter HUD contains the following line: "Source: Library Library."
The searching appears to be normal when one of the "Library" fields is selected, but it may or may not be normal when the other "Library" is selected. The odd thing is that, when I search my hard drive, there is only one Aperture Library.
One of the strengths of Aperture is the library functions, but I'm rapidly losing my trust in search results.
Anyone know how to control the Library field?
Many thanks,
Rick

The "Source: Library Library" line is the same as you show, but I also get the double library when filtering rules are being used.
I tried opening the HUD of different smart albums to see if that made a difference. If the smart album filter HUD that I open is one of the "Library Albums," that Filter HUD displays "Source: Library," and when I click on the Photos item, that Filter HUD displays "Source: Library Library." If the smart album filter HUD that I open is for one of my projects, that Filter HUD displays "Source: Library {Project name}," and when I click on the Photos item, that Filter HUD displays "Source: Library Library."
I'm having trouble re-creating the problem that initiated this query, but I'm still not getting expected results with searching. If I open a filter HUD for a smart album, then click on the Photos item in the library, there are no invisible filters being applied. The only filter checked is Rating, and when the rating is greater than or equal to "unrated," all of the photos are present. So far, so good.
However, if I go through the process of checking for an invisible filter (i.e., open a filter HUD for a smart album, then click on the Photos item in the library), and then add a text filter criteria to the open HUD, say the street name, "Celetná," Aperture correctly finds 32 items. If I go through the process of checking for an invisible filter, close the open HUD, and then enter Celetná in the search box in the upper right corner of the brower, Aperture only finds 9 items. Similarly, if I go through the process of checking for an invisible filter, close the open HUD, and then re-open the HUD by clicking on the icon in the upper right corner of the brower and entering Celetná into the text filter, Aperture finds 9 items.
I hope this is clear. Any ideas?

Digital filtering problem

I am doing a continously data acquisition (buffered) and digital filtering.
I need a bandpass from 300-3000hz.
I am sampling around 15000 hz.
My data acquisiton is working fine.. but I have no clue why this filter is not working!
I have seen allthe examples and I dont think I have dont anythign different ...
Can anyone point out what is my error?.
I did some debuging and i think something is wrong with the case structure in processing.vi..No data maniputaltion wihtin th case structure is working ...
Have attached the files
thanks
Clueless :-(
Attachments:
datacquisition.vi ‏95 KB
processing.vi ‏92 KB

hi david
thanks for your reply.
I used the single stepping technique and I now see that the status of the error is FALSE but the code number is 10803. Just as u had said!
This warning is generated in the first vi that is AI Configure.vi.
I tried looking up this warning but it was very vague.
it says
NI_DAQ LV: The ongoing transfer has been stopped.This is to prevent regeneration for output operations, or to reallocate resources for input operations
The source is AI Group configure.
I tried what you suggested and removed the code condition and it works!
But I would like to know if it is okay If I remove the
code from the OR condition.I saw the example of MY DATA PROCESSINg.vi and in that they have wired the code to the condiiton.
Can there be
any warnings for which it would not be advisable to continue executing?
Also I would be very very grateful if you could tell me why am I getting this warning to avoid future problems..
thanks again..

Filters problem on 3.8

We have BM 3.8 sp5 running on NW 6.5 sp6 and was having an LDAP problem between our two servers a few months back. Finally opened up a support request with Novell and they removed directory services from the BM server, they then pulled the directory info from our other server. I didn't realize until later that my filters are gone from our BM server. I first ran filt migrate, like I did when I upgraded to 3.8 a year or so back, but that didn't seem to work. I have a print out of the filters, and was going to put them back in manually after running bdrcfg. When running bdrcfg I had a message that all filters could not be created and that my server was still not secure(or something to that effect). Not knowing what to do next, I re-applied BM sp5 but could not see that it changed anything. Do I need to remove BM, then re-install?
Thanks,
Rob

Originally Posted by phxazcraig
In article <[email protected]>, Robkoon81 wrote:
> Not
> knowing what to do next, I re-applied BM sp5 but could not see that it
> changed anything. Do I need to remove BM, then re-install?
>
You're not in bad shape, though it would have been good to have a backup
of the ETC directory from before the removal of eDir.
BRDCFG will create default filters and exceptions. If it sees other
exceptions already present, it will give you a warning that there might
be security issues - it doesn't know what is there and what is not
there.
If you have a printout of the filters, you can use FILTCFG to put them
back in manually.
If you have a backup of the ETC directory, there is a good chance you
can restore the old filters using a FILTSRV MIGRATE procedure. There
are a number of variables in your situation that can make things a bit
messy at this point (you might be interested in my BMgr Filtering book
at this point - see the URL below), but bottom line is that you don't
have to reinstall, and worse case should be able to just do a lot of
typing in FILTCFG to get the filter exceptions back.
You do have to be careful that filtering itself is actually working, and
that you don't have a lack of filtering - see tip #13 at the URL below.
Craig Johnson
Novell Support Connection SysOp
*** For a current patch list, tips, handy files and books on
BorderManager, go to Craig Johnson Consulting - BorderManager, NetWare, and More ***
I think I can find a backup of the etc directory. From reading your tip #13 I assume that the file filters.cfg is the file I need to restore from the etc directory?
As far as if filtering itself is working, if I look at the packets denied list, all I see is: <End of List>
Thanks,
Rob

Gmail filters problem

I have a problem with Gmail filters on my BB. I have set those filters in Gmail to bypass my inbox. But this isn't happening on my BB. It notifies me about every email that goes into the filters. I would like it to not notify me about those emails.
Thanks for the help.

Hello tomek,
Welcome to the BlackBerry Support Community.
Only email deivered to the main inbox for your Gmail account, will be delivered on your BlackBerry smartphone.
Let us know if you have any other questions.
-FB
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click "Accept as a Solution" for posts that have solved your issue(s)!

Java Filters Problem

Hello,
I encounter some strange behaviour when using Filters. I created and configured a Filter that checks if the user supplied the language parameter in the servlet request. All incoming request are passed throught the filter (see code snippet).
public void doFilter (...) {
if (request instanceof HttpServletRequest) {
            // Check if the request contains the language parameter.
            String language = request.getParameter(WebKeys.RequestObject.SCREEN_LANGUAGE);
            if (language != null && language.length() > 0) {
                if (LOG_ENGINE.isDebugEnabled()) {
                    LOG_ENGINE.debug("Switch screen language to: '" + language + "'.");
                // Store the language value in the session object.
                ((HttpServletRequest) request).getSession().setAttribute(WebKeys.SessionObject.SCREEN_LANGUAGE, language);
<filter>
         <filter-name>language</filter-name>
         <filter-class>com.lcmg.ticket.presentation.web.filter.LanguageFilter</filter-class>
     </filter>
     <filter-mapping>
         <filter-name>language</filter-name>
         <url-pattern>/*</url-pattern>
     </filter-mapping>The servlet after the filter is doing some work. One of the things the servlet does is sending a XML document to an external system. What I can see is that when the filter is between the servlet the data send to the external system is empty and when we remove the filter the XML document is send properly.
I did some tests myself and I noticed that when I remove the request.getParameter(..) statement everything works well!
I realy don't know what is going wrong.
Kind regards,
dee3lmo

Hi,
I'm having similar problems.
We've tracked it down to the same issue... when you call "request.getParameter(xxxxx)" in the filter the request object get messed up somehow and the servlet that handles the request afterwards does not act as it should. In our case when you click on a link inside the website the page refreshes rather than take the user to the new page.
When we comment out the line that calls getParameter, everything works fine. What does getParameter do to the request object in Filters?

Planning Filters problem

HI,
We are facing once problem while Planning Security doing pushdown.
Suppose if User left company then his Userid gets deleted from MSAD. But when we do pusdown in planning it gives us an error that User and Filter for users exists there. Currently we are deleting these Filters manually.
Is there any utility provided by Hyperion to sync Planning Filters security with MSAD.
Thanks,
Vishal

I see you have replied to this post :- Removing 'msad' strings for invalid users in Planning
Have you not tried the different options discussed in the post.
Cheers
John
http://john-goodwin.blogspot.com/

Bordermanager 3.8 sp5 ir packet filtering problems

Hello,
On a freshly installed netware 6.5 sp6 with post fixes server, i have some problems with the packet filters i had never before.
the strange thing that happens is that when i load my filters some services configured on the private network card get blocked to. Like DHCP (does not want to bind)/NDPS manager/Groupwise poa
The rest of the traffic is going correctly thru my exceptions.
i already checked the tcpip.cfg for duplicate entry's and checked my servers configured services and ip numbers on NORM.
already tried to clear all filters and delete the filters.cfg file and run a brdcfg.
Best regards,
Niels van der Greef

Originally Posted by Craig Johnson
What is configured in FILTCFG for filtering (not filter exceptions?)
Does it look like tip #13 at the URL below?
Craig Johnson
Novell Support Connection SysOp
*** For a current patch list, tips, handy files and books on
BorderManager, go to Craig Johnson Consulting - BorderManager, NetWare, and More ***
Yes the filters are configured that way.

Material Replication filtering problem

Dear Experts,
we are working on SRM 5.0 Server 5.5 and we are facing following problem during material replication and delta download replication. After making all steps related customizing objects alignment between R/3 and SRM, we putted the filter using transaction R3AC1:
- Table = MARA
- Field = PSTAT
- OP = CP
- Low = E
- Inclusive indicator
Then we Synchronized the filter and checked on R/3 table CRMFILTAB: the filter entry was existing even if disappeared after running on SRM MATERIAL Initial Download (strange!)
Our expectation was to get all materials from back-end having purchasing views and linked to material groups replicated. Unfortunately the number of materials replicated are less !!!!!
Also we tried to make delta download and the above filter is not taken into consideration during delta download: all products modified on the back-end are replicated, also those materials without purchasing view!!!!!
What is wrong???? What should we do for making this filter working???
Thanks
#Bill J.

Vangala,
That's great!!! I tried to implement manually and worked very well,
Thanks a lot.You got 10 points.
#Bill J.

Filtering Problem

Similar Messages

Maybe you are looking for