Final Cut Express 2 vs. 4

I'm a Final Cut Pro user who has been asked to train a colleague on Final Cut Express 4.
I'm not all that up on Express.
I have a copy of FCExpress 2, and he has FCExpress 4.
Are there HUGE differences between the interface and features of FCExpress 2 and 4?
Any input would be appreciated. Thanks.

Thanks much Tom.
I see that the motion keyframing interface is different than Final Cut Pro.
Can you place key frames on images and pictures and scale them up and down
within the same clip? I don't see a keyframe button?

Similar Messages

  • I'm running Final Cut Express 2. How can I move entire project and application from one internal hard drive to another? Ran out of space on one drive. Thanks.

    I'm running Final Cut Express 2. My video project is 95% done and I've run out of space on my 500g internal hard drive. How can I (1) move the complete FCE program and video to my unused 250g internal hard drive and operate it from there and (2) how do I then purge all the FCE info from the 500g drive without losing anything from the 250 drive?
    Also, is it possible to change the aspect ratio from 4:3 to 16:9 when the project is finished? If so, how? I now know this all should have been done before I started. Thanks for the help.

    1. You can't move the application. It must remain on the system drive. Move your capture scratch folder to the external FireWire drive and use the reconnect function in the project.
    2. What's the media 16:9 or 4:3?

  • My external hard drive is 'seen' by my iMac and I can go into the Finder and open files and folders. I am using the hard drive for Time Machine back up. However Time Machine says it can't find the drive. Same thing has happened with Final Cut Express.

    My new LaCie external hard drive is 'seen' by my iMac and I can go into the Finder and open files and folders. I am using the hard drive for Time Machine back up. However Time Machine says it can't find the drive.
    The same thing happened recently between Final Cut Express and my other LaCie external hard drive used as the Scratch disk. It fixed itself.
    I've run out of ideas. Help would be very much appreciated. Thanks.

    have you done some searches on FCPx and time machine? Is there a known issue with using a TM drive with FCPx? dunno but ...wait...I'll take 60 sec for you cause I'm just that kind of guy....   google...." fcpx time machine problem"  Frist page link 
    http://www.premiumbeat.com/blog/fcpx-bug-best-practices-for-using-external-hard- drives-and-final-cut-pro-x/
           You cannot have time machine backups on your hard drive if you intend to use it in FCPX.
    booya!

  • Final Cut Express won't allow me to capture from my vdo camera

    I just loaded Final Cut Express HD on my Mac because I wanted to upgrade from IMOVIE. My Powerbook G4 had no problem capturing video with my Sony HDV 1080i video camera. But I can't get Final Cut Express HD to locate my camera at all no matter what "easy setup" setting I choose. But if I turn on IMOVIE, the program can capture from my video camera no problem. I know the firewire cable is hooked to the computer correctly & the camera is on & in the VTR mode. If anyone can help me identify this problem, I'd really appreciate it because I'm trying to begin a new video project & can't if I can't capture video. Thanks for helping.

    Fritz from Technical support told me about a glitch in Final Cut Pro & Express HD that happens when you upgrade to Quicktime 7. He told me to go to this article: Link: http://www.info.apple.com/kbnum/n301852
    and follow the instructions & it would fix my problem. It didn't & then of course I called tech support back & it was after hours. I still can't capture from my video camera but it works in IMOVIE. I removed Final Cut Express HD from my computer (even all the files in library/users, etc.) and then reinstalled it. It still gives me the same error even though I have my camera plugged in & turned on. It says unable to locate capture device. This is unbelievable. Hopefully I can get some help. Brian

  • Final cut Express unable to capture

    My Final Cut Express wont initialize my deck. A dialog box comes up saying so. one site suggest deleting quicktime receipts in my library folder on my mac, that quicktime needs to be reinstalled, then i should be able to get my canon HV20 video camera to communicate with FCE 4 and start capturing. has anyone heard of resolving my "unable to initialize video deck" issue this way? Any ideas how to get my HV20 and FCP to communicate to eachother?

    There is a separate forum for FCE.
    Make sure you are using the correct HDV settings in FCE and that the camera is set to output HDV and not downconvert.

  • Final Cut Express won't capture audio with the video anymore, why?

    I have used Final Cut Express 4 for over a year now with no problems, but recently I am unable to capture any audio with the video from my camera. I can do it through iMovie no problem. I can't figure out if I changed a setting by accident because everything looks normal to me. Could another program be interfering with this? Quicktime Pro? I have no idea how to fix this.

    First of all, we need a bunch of information in order to help. Please provide the specs of the footage and the sequence you are using. Also, are you using DV, HDV, or AVCHD? Do you hear audio when the clip is played in the viewer, or is there no audio at all once the clip is captured/ingested?

  • Panasonic HDC-SD100 media card unable to capture on Final Cut Express 4

    No problems at all with transfer to i-movie but just purchased final cut express 4 and problems with capturing from the media card. Signal system on camera is 1080/50i. Have tried setting HD and 1080/50i in the easy set up but no joy. Have tried log and transfer and see clips but on transfer message states no data. Can anyone help with the settings please?
    Many thanks in advance

    Welcome to the forum!
    There are many things that could cause this, and almost all have been discussed.
    Some things to try:
    • In the Log and Transfer window, click the preferences button (the gear in the upper right). Make sure audio is set to *Plain Stereo*
    • Also in that preferences window, click the button to *Clear the Cache*
    Also, what drive are you using to capture to (internal or external)? How is it formatted, and how much space is left on that drive?

  • IMovie 08, iMovie 6, or Final Cut Express

    I just got a new Sony HDR-SR12 HD camera. It records in 1080i. I tried iMovie 08, but I don't like the export options. I used the iMovie 08 import .mov file and opened it in iMovie 6. I exported the video and it doesn't look that good. I'm thinking about Final Cut Express but I don't know how it integrates with iLife apps. What's the best option?

    iMovie 08 imports AVCHD in full 1080i. The AVCHD is converted to Apple Intermediate Codec 1920x1080.
    The issue comes when you render the project. The iMovie 08 presets max out at 960x540 for Apple TV. Apple TV looks very good because most TVs will upscale it back to 1920x1080.
    It is possible to export to Quicktime in full 1920x1080.
    However, then you have the problem of how to play it back.
    You can play it back at 1920x1080 on your Mac, if your screen is large enough.
    You can play it back on a Sony Playstation 3.
    You can play it on a BluRay Disk Player.
    Toast 9 permits burning a BluRay Disk in full 1920x1080. You will need a BluRay disk Burner for this. Toast 9 also lets you do a short AVCHD/Bluray disk on a regular DVD on a regular DVD burner, but you are limited to about 20 minutes of playing time.
    If you burn to a normal DVD in MPEG2, you are limited to 480i, so that is the worst option.
    Message was edited by: AppleMan1958

  • Is it possible to transfer stored (b-roll) video footage from Final Cut Express to Final Cut Pro event library? Is so, what do I need?

    I have been editing in final cut express and now that I'm working in Pro X I would like to transfer my b-roll footage from FCX to Pro X. I read that there is an app. that you can buy that does this for Final Cut Pro 7, is this possible with Final Cut Express?

    Any media used in FCE can be used in FCP. No third party software is required.
    You cannot take an FCE project to FCP. 7toX will not help as FCE has no XML export.

  • From Final Cut Pro to Final Cut Express

    I shot something in HD on a P2 card and captured it into a computer with Final Cut Pro. I want to edit it on my laptop at home, on which I have Final Cut Express. If I export the FCP file and make it a quicktime file to use on my FCE, will the video maintain its HD properties? (Forgive my ignorance. I'm still learning.) Thanks in advance.

    I'm guessing but if you shot it on P2 media in HD it's probably DVCPRO HD. The codec for this format is only available with FCP. You can't edit this edit in FCE unless you export it to the the Apple Intermediate Codec. Yes, there will be some quality loss in the porcess.

  • I am traveling with my macbook pro and I forgot to install final cut express and quicktime pro before I left. How can I in a way download them for free on my laptop from where I am

    I am traveling with my macbook pro and I forgot to install final cut express and quicktime pro before I left. How can I in a way download them for free on my laptop from where I am? I need them and don't want naturally to buy them again!!!
    Thank you    

    Assuming you purchased QT Pro, you can always download it again at no extra charge by logging in to your Apple account.
    Regarding FCE, there is no way to download & install the product.  You need an original FCE install disk and your FCE serial number.
    Final Cut Pro X (aka FCPX) can be purchased & downloaded from the App Store.

  • Importing itunes into final cut express

    I just bought an IMAC with Final Cut Express to do all my video editing of my kids activities. I used Pinnacle Studio on my old PC prior to this but it finally gave out. I downloaded some music CD's I had into itunes and then tried importing the music into FCE. This is not working. I have no problem adding it to my imovies but it will not work with FCE. The music format is m4a which I think is typical.
    I went to You Tube and watch several tutorials from some of fellow FC users and still cannot get it to work. There must be something I have to set up in FCE to get this to work but I do not know what that is. I been looking around the program and have not been successful. Any help any of you can provide would be great. Thanks.. Ron

    Hi Ron, and welcome to the FCE Forum !
    You should convert the audio files to AIFF, 48KHz (aka 16-bit) stereo before importing them into FCE. Neither CDs nor iTunes songs are in that format. You can use iTunes to do the conversion.
    With a new Mac and Snow Leopard you probably have iTunes9. Open Preferences, then go to General > Import Settings, then select AIFF and set Custom Settings as 48KHz, 16-bit, stereo. Save the settings. Then in your music library, select the song(s) you want to convert and do Advanced > Create AIFF version. (Note: the format you selected in Import Settings controls what the Advanced > Create menu option does.)

  • "Unable to open project file" message in final cut express 3.5.1

    I have (well had now) a project with 3 video clips and multiple .psd files as stills. When the project contains just the 3 video clips and a couple of transitions I can save the project and quit Final Cut Express and relaunch FCE and when I try to re-open the same project, it opens just fine, without any problems and just the way I expected it to be. After editing the same project for a couple of hours and saving along the way (this has happened twice now and I don't think the length of time of editing matters) and adding multiple still images to the 3 video clips (this part is new in my working with FCE); I save and quit. When I return to open the same project I get the message "Unable to open project file" and click the OK button, which is my only option and I am given a new blank project. So where did my work go???

    Thank you for the response, but it hasn't worked yet...
    I read the link. I am working off my internal drive.
    I re-named the Capture Scratch folder, and any Render folders and then launched FCE. I was presented with a window that reads "To preserve the integrity of the data used by Final Cut Express HD, it is necessary to ensure the existance of the following path(s)" The path in the box below is where my project file and support files are. My 3 options are Quit, Check again and Reset Scratch disk. I choose the Reset Scratch Disk button and it took me to the Scratch Disk window and I Set/Created a new folder and clicked Choose and then OK back at the Scratch Disk window and Continue at the initial window... the Reset Scratch disk button is now labeled Continue. I am given a new Untitled Project work space. I tried to open my project file and once again with the message "Unable to open project file".
    Where did I go wrong???

  • Just installed Final Cut Express 4 but doesn't open

    Hey I'm a dummy but....Just installed Final Cut Express 4 but doesn't open tells me I don't have the AGP graphics card,my ATI Radeon X1600?Do some imac 1.83 Intel Core Duo come with out it?I'm freek'n stuck!!Any help would be Greatly appreciated!!

    Al's suggestion should solve the problem.
    However, if you get fed up with hitting the esc key every time you open FCE you could try this permanent cure .......... it's nowhere near as frightening as it sounds and only takes a minute !
    For a permanent cure edit the info.plist like this:-
    1. Right click on the FCE icon (in Applications NOT the Dock) and select "Show Package Contents".
    2. Open the "Contents" folder and double click the "info .plist". It should open automatically in TextEdit - if it doesn't, choose TextEdit manually.
    3. Around 15 or so lines down you will see AGP. Delete it and put in PCI.
    4. Close the window and when asked if you want to save the changes, say yes.

  • I am new to Final Cut Express and don't understand why I am unable to drag transitions into Canvas? Something wrong in my setup? It's not the overlays they are "on" so can anyone advise me please?

    I am new to Final Cut Express and don't understand why I am unable to drag transitions into Canvas? Something wrong in my setup? It's not the overlays they are "on" so can anyone advise me please, by the way the "L" doesn't appear in the bottom left hand corner either? and by the way how can I get rid of that irritating Blue badge saying "AutoFill your contact details" all mine are in "address book" already!

    You can't drag a transition into the canvas. If you're dragginmg a transition from the effects tab you drag it between the edit point of two clips in the timeline.
    Make sure show edit overlays is turned on in the Canvas view popup.

  • Question re Final Cut Express Capabilities

    I'm about to make the jump from another editing system over to Final Cut Express 4.
    One of the things I want to be able to do is line up and load three different angles from three different cameras and be able to edit "on the fly" as the scenes play. I have a concert video, shot in a studio, with three cameras on tripods. Now I've got three tapes and I want to load them all into memory and then crossfade or cut between angles on-the-fly.
    As well, I want to be able to shoot interviews with two cameras, each one pointing at the different people interview. Can FCE handle two different simulataneous inputs and then store the scenes in such a way that I can then cut between the two during the editing process?
    Is there additional software or hardware needed for this? In my ten-year-old editing machine I've been using, this can be done ... but it's a major workaround and a major effort. And in the later versions of my same old machine, they had a feature called "Quad Cam" which showed up to four scenes on your monitor playing simultaneously, but it was expensive and needed a fast processor, which I didn't have. I suspect my new MacBook Pro will handle this, assuming FCE4 is able to do it.

    Hi
    The Multi Camera function in FCP is very time saving. And there are other functions
    in FCP that might add to the value to take the leap.
    The Color correcting tool was so much better and Color included (even more sofisticated)
    DVD-Studio Pro
    AND - Compressor !
    Still to get more than one Camera to hard disk in live.
    I tried a simpler version of this "Capture Magic HD" - only SD but
    on a PowerBook G4 1.5GHz
    one extra FW-port on a PSCIA (or whatever) card - to get an extra individual FW-port
    and TWO Cameras in real-time download to internal hard disk.
    EACH Camera Must have a true FireWire port - not a split one as on Mac 400/800
    (they are one and the same)
    It worked as a charm. Ready to be edited immediately after Capture.
    Yours Bengt W

Maybe you are looking for

  • What are the reasons why Server Assistant won't detect Auto Server Setup ?

    Hi there, I've been having issues with Auto Server Setup mechanism (the mechanism that allows an administrator to install a machine without human user interaction). I actually have the answer to my post question but I post it anyway because it might

  • Javascript not working when pdf is rendered in the browser IE9

    I have a javascript on the initialize event of a field and it works fine when doing a Preview PDF but not when i render the PDF in the browser if(F.Page_1.field1.rawValue == null)            F.Page_1.field1.presence = "invisible";            F.Page_1

  • Output in Zip format

    Help, i must resolve this problem. I must modify one existing application write on Apex 3.2 I must creat the output report in zip format, the application now create the output in Word, PDF, E-mail, end txt. Thanks for information. (sorry for my wron

  • After 2.2, this phone is trash

    2.2 was recently pushed out to my phone, and I couldn't be unhappier. On 2.1 my battery would last pretty much all day, draining to the point that it asks to connect a charger by maybe 7 or 8pm. By then I usually am home and its not a problem. Now wh

  • Doubts reg try block and return statements

    hi public int test()           try                System.out.println("hi");                return 1;           catch(Exception e)           System.out.println("err");           return 2;           finally                System.out.println("final");