Final Cut Pro 10.1.3 Exporting Problem

Hi I'm a YouTube, a Youtuber that LOOOVES to edit.
I've had Final Cut Pro for a while now and everything has worked fine. I've been working on a project recently and completed it but when I go to export it and click an option nothing works.
I need help. I've tried reinstalling and shortcuts

WHat version of FCPX ? Only FCPX 10.1.3 will run with Yosemite.

Similar Messages

  • Final Cut Pro 7 to X Export Problem

    Hello,
    I'm using the Final Cut Pro 7 to X app to try and get XML files from 7 to X. However I keep getting this error message.
    >final cut pro 7 to x error this item is not on an edit frame boundary<
    I did some research on this but there doesn't seem to be much information on this topic.
    Is anybody familiar witht this problem?
    Trey

    I've had experience wiith using 7toX and never had that message. Have you tried contacting the developer? My guess is they would be responsive.
    Russ

  • Final Cut Pro X Image Sequence Export missing frames per second option?

    I am using the trial version of Final Cut Pro X.  I can export an image sequence but it will only allow me to do so at 30 frames per second -every single frame! 
    So a 10 min movie takes half an hour to export 20,000+ frames that no one on earth has time to look thru.
    In my old Final Cut Express I was able to choose 1 or 2 frames per second, which was just right.
    What am I missing?
    Do I need to buy Quicktime Pro or Compressor to allow me to export image sequences without exporting every frame?
    Why would Apple even have an image sequence export if it only allows you to export every frame, or it that only in the trial version?
    Thank you

    I found a free option for you, if you don't already have Compressor 4.
    In FCPX create your movie. Then SHARE as a Master File.
    Get MPEG Streamclip, which is a free app available here.
    http://www.squared5.com/svideo/mpeg-streamclip-mac.html
    Drag your Master File into MPEG Streamclip.
    In MPEG Streamclip, select FILE/EXPORT TO OTHER FORMATS.
    In FORMAT: choose IMAGE SEQUENCE
    In OPTIONS, choose your frame rate.

  • Final Cut Pro x how to export OMF?

    Final Cut Pro x how to export OMF?

    As far as I understand, FCPX doesn't support OMF exports, unless something has changed recently. There are some workarounds that you can do, see this post. It looks a little cumbersome though. Hope that helps you further.

  • Quicktime 7.1.5/Final Cut Pro 4.5 Image quality problems

    Hi.
    A lot of the time when I export .dv video into a lower quality video (.mov, .mp4) there are weird lines that appear in the motion. It's hard to explain, so I will post an image of it.
    http://img.photobucket.com/albums/1003/KhyronJinn/Screens%20with%20a%20purpose/Q uickTimePlayerScreenSnapz001.jpg
    *Just tried again*
    This happens with ANY export to any settings, even at the highest quality and almost identical hard drive space. I've also observed this problem when using still frames in Final Cut Pro, these lines of motion (I guess you could call them?) from one frame to another when extracted from a still. I'm at a complete loss here.

    Use the De-interlace filter in FCP...If your using Compressor, best bet is to de-interlace in Compressor.

  • Final Cut Pro X cannot be exported

    Hi all
    I am using final cut pro 10.1.1 with OSX 10.9.2
    Just tried to export a video however it shows an error ""Video rendering error: -50""
    I have been turned off the background render and deleted both project and events render files
    so... how can I fix the problem?
    p.s.
    Macbook Pro with Retina display 2013
    2.4 GHz Intel Core i7
    16 GB memory

    Do you have App Nap turned off for FCP?
    Russ

  • Final Cut Pro Quitting Unexpectedly When Exporting Video

    Currently running Final Cut Pro version 6.0.6. Never really had a problem with anything. I am trying to export a video I edited of a show which is around 2hr. 30mins. In the past, I've exported this type of file and never had any problems, just took a little bit of time. Currently trying to export at the size of 1280x720 and when I do, Final Cut begins to export, gives me an estimated time, gets to about 9% and then quits. No reason why? I have never had this before on any of my machines. I currently have about 50GB of hardrive space free, so I am really not sure why. Any ideas or suggestions would be appreciated.
    -Matthew

    and you can export sections til you find the problem clip.
    You might also try creating a new sequence with the same settings, and copy everything from the problem sequence. This will sometimes resolve this kind of issue.
    Message was edited by: Michael Grenadier

  • Final Cut Pro X not completing export to blue ray

    Running Final Cut Pro 10.1.2, OS 10.9.4, Macbook pro I7 2.3 ghz, 16gig ram...  I can export a short sequence to blue ray from Final Cut Pro X and it works.  I have a 41 minute video that when I "share" to Blue Ray it will burn about 6-7 minutes of the 41 minutes without any errors.  It completes as if it worked but when you look at the video it is only 6-7 minutes.   A few portions of it are also pixilated, that's not the case when I'm viewing it. 
    Any ideas on the blue ray.  I have an external Pioneer Blue Ray burner which as I said works fine on short videos in Final Cut Pro X.  

    Hello Gary,
    Check out this thread for ideas.
    More than a few users have struck issues since 10.1.2:
                     Blu-Ray burning error after Final Cut Pro 10.1.2 update.            
    Al

  • Final Cut Pro Causing Hearing Damage *Big Problem*

    I've been experiencing a unique problem where I'm editing / playing footage back and out of nowhere a very loud blatting noise erupts from Final Cut Pro. When I'm wearing headphones the noise is catastrophic and I immediately I have to take the headphones off because I'm reeling in pain from it- it's so loud my ears keep ringing for about 5-10 minutes. It's happened about 5 times now over the course of 6 months. No rhyme or reason to it.
    At first I thought it was an internal soundboard thing because it first came from my MacBook Pro (2.53 ghz core 2) when I was using FCP 6, not doing anything fancy just editing with an external drive + headphones. It's happened about 4 times on that machine in about 6 months, just randomly.
    Then today I was editing with FCP 7 on my other machine (iMac 2.4ghz core 2 duo) and the noise happened again on the iMac, different project, different external hard drive, just playing back regular footage. So apparently this problem is software-based because it's happened on 2 machines, all different projects, all during playback (not doing any audio editing). Luckily I wasn't editing with headphones on but the sound emitted a huge BLAT from the iMac's internal speakers that was so loud that it scared me. All instances I've re-started FCP and my machine and all software has been up to date. So I have no idea what is causing this.
    I took a screenshot of the blat because it registered on FCP's audio levels even though it is not there in the audio track, but I can't seem to post the screenshot here on the message boards.
    Anyone ever experience this before? Does Apple know / care about this problem? Seems like people could definitely sue over this for hearing damage....
    Message was edited by: applefront

    Happened today on my new Macbook Pro, 15-inch i7 while editing in final cut. Has happened several times before this, as well. Never had this problem while editing on other computers, including an older Macbook Pro and also a 2.26 Ghz dual Quad Core tower.
    The clip that caused the blowout had the following audio: 16-bit integer (Big Endian), Stereo, 19.2 Khz.
    My sequence settings for audio are currently 16-bit, 48 Khz, Channel grouped.
    Please get around to fixing this, folks at Apple. I work as an editor and I currently can't wear headphones for fear of blowing out my eardrums.

  • Final cut pro 7 interface font display problem!

    Hello,Every Editor,My final cut pro 7 have wrong font display problem!How to slove?How to resume default font?
    I create a new Accounts to slove the wrong font problem!But How to slove the problem in old Admin Accounts?thx for everyone help!
    Please forgive my poor english!THX 
    Wrong font display:
    Normal font display:

    Tom.I have uncheck the box for chinese and then restart!But it still does not slove the problem.
    Please see the Pic:
    Wrong:(click to see large)
    Normal:(click to see large)

  • Help! Final Cut Pro unexpectedly quits during export.

    This couldn't have happened at a worse time. I'm desperate to make a deadline and every time I try export using final cut pro OR compressor the program will unexpectedly quit in the middle of it. It usually happens within 10 minutes of a 40 minute export. I'm just doing a standard quicktime export of an 80 minute long movie. It was working fine only a few days ago. Anyone have any ideas what this might be? We've tried all the normal things, restarting, using final cut rescue, etc.
    Not sure what else to say. We are in a huge time crunch and we can't even get it off of the computer and on to another one.
    If you need any more info please ask.

    Hey thanks for your help! Yes I have tried exporting a self contained movie but everytime it just quits on me. I've tried about 15 times so far. if it is a corrupt render file is there something I can do about that? Ive been trying to render it to the full render in final cut as well before an export but after about 5 minutes final cut quits. So now it quits when I render AND when I export. So ive been going through and rendering 3 minutes at a time, maybe that will help. I dunno.
    thank you again,
    Adam

  • Final Cut Pro X is neither exporting nor rendering!

    Friends,
    I finished working a project (film trailer), which is having a duration of 03 minutes.
    I already exported the project and uploaded it in the websites.
    But now again after a while when I tried to export the same project, its not getting exported.
    Final Cut Pro gets Quit always.
    I duplicated the project, deleted all the render files and did it again. But the same result.
    My other projects are getting exported and no big issues with rendering.
    The aspect ratio of the project I'm working is 2048*872 @ 24fps.
    Shot on red, converted it using RED Cine X Pro to Apple Pro res 4444.
    Is there any way to solve this issue?

    When I had a renderproblem, not exactly as yours, I turned off the background render. Then I marked first clip on timeline and used  Modify/Render Selection or the short key   ctrl-R. If that worked I rendered next clip until .in my case, I found a clip that caused the trouble. Perhaps you should test that. Then I replaced the clip fresh and all worked fine.

  • Final Cut Pro 10.1.2 update problem: shared items all deleted.

    I upgraded from Final Cut Pro 10.1.1 today to 10.1.2. I've been working with 10.1.1 for a few weeks without problems and sharing videos. After the upgrade to 10.1.2 all the shared items that had been held within the "Shared items" folders have vanished and I cannot find them anywhere! Has anyone else had this problem?

    Blow Creative wrote:
    Sounds like a rudimentary question but how do you roll back to teh previous version?
    You would need to restore from a system back-up.
    Blow Creative wrote:
    Final Cut automatically updated on our video iMac overnight and now keeps bombing whenever we attempt to do access any files.
    Change your App Store Preferences so that you make the decision about what gets updated and when.
    Russ

  • Final Cut Pro X will not export my project - error 1

    Hello everyone,
    So Final Cut is giving me a hard time. I have a project about 15mins long that I would like to export as a master file and it just doesn't want to work. When I first finished and tried to export, I was using verison 10.0.8. I would select master file for the export and it would just sit there, stuck on 0%. I then realized that I needed to update. I updated to 10.0.9 and tried to do the same thing again - no luck. Next, I closed final cut and trashed preferences. I then opened up and tried exporting again, same thing happened, stuck on 0%. Then I closed again and trashed preferences again. I opened final cut, turned off background rendering, and trashed project render files and event render files (as was suggested in another discussion for export problems). After doing that, I again tried to export - still nothing. At this point of course, I had trashed the render files, so I figured I should just let the project render again. I turned background rendering back on and opened my project - now it would not render! It was stuck on 0%! Okay so I closed and reopened again. I first tried to copy my whole project into a new project and try letting it render that way - nope, didn't work. So I closed and opened again. I turned off background rendering and started a new project. I pasted just a section of my video into the new project and manually rendered that section, which worked. So I pasted the rest of the video (in chunks) into the new project, manually rendering chunk by chunk. Finally I had my whole project again, and the whole thing was rendered. I tried exporting again and got the error 1 message, "The operation could not be completed because an error occurred when creating frame 373 (error -1).". This is my current state of affairs, and its driving me crazy. I just want to export my project!
    Please help....Thanks

    Thank you. I found it now. This is a location where I did not expect this. I tried to do this using the GUI elements controlling how clips are displayed in the time line. I also was looking for a context menu item on the clip. I did not expect it in the preferences.

  • Final Cut Pro X crashes on export

    I chose to ignore the overwhelming negative discussion that has surrounded FCP X and decided to purchase and learn the program early.
    I went in with eyes wide open hoping I could learn quickly and start turning out video's as good or better than we're producing in Final Cut Express which is the video editing program used by the company that I work for....
    Long story short.... I had an assignment which included video.... I turned out a project in FC Express which was acceptable to me but I wanted to do it again in FCP X for the experience. I started from scratch, imported the files, created a new project etc etc etc. I finished the project ... the total video was only 1 minute 30 seconds I then tried to export it. The program crashed and I lost the project but not the imported files. I did it all again with the same results.
    I'm using a new imac 2.8 Ghz Intel Core 7,  8gb ram , 2TB Hd...  so I should have plenty to work with.
    Anybody have any suggestions as to what I might be doing wrong or is the nature of the beast?
    Thanks,
    Message was edited by: edhille

    1st, be sure your media is not on your system drive.
    2nd, run Disk Utility to "repair" all drives connected to your system.
    3rd, try Preferene Manager, free from Digital Rebellion, to safely and properly trash FCP X preferences.
    Finally, there's Disk Warrior that will repair the directories on all of your dirves.
    But, FCP X is very buggy, there's a lot that needs fixing.  I'd trash prefs, and run Disk Utility, and if that doesn't work, file with Apple (FCP X menu, feedback option).

Maybe you are looking for