Final cut pro audio missing from clip once i move it from viewer to canvass?

hi i'm new to final cut pro 7, when i play my video in the viewer i can hear the audio loud and clear however when i'm move it to the canvass and play it in the time line the audio is gone? can someone pls help me

Probably best to ask this questio in the FINAL CUT STUDIO forum and not the FCPX forum, BUT -- since you're here...
Make sure that the AUDIO PATCHES are connected to the timeline... those are the pluggy arrow type looking things on the left side of the timeline.  With the clip in the viewer window add it into the timeline.  Audio should come with it.
Or - do you already SEE the audio tracks on the timeline and you just can't hear it?  (if that's the case, try opening the audio mixer and making sure the master volume is up.
Good luck,
CaptM

Similar Messages

  • I have recently update my Final Cut Pro X to Final Cut Pro X 10.1. I downloaded the update from the app store. Now every time I open Final Cut it crashes almost instantly. What can I do

    I have recently update my Final Cut Pro X to Final Cut Pro X 10.1. I downloaded the update from the app store. Now every time I open Final Cut it crashes almost instantly. What can I do?- I really need help!

    It sounds as though you have a corrupt project - or possibly a file within an event that is causing the application to crash.
    Quit FCP X, then move your projects and events (if you have any) to new folders so that FCP X doesn't find them, then relaunch the application. If it launches OK, there's a very good chance one of your projects or events is causing the problem.
    Quit the app again, then move one event or project at a time back to the original folder and launch FCP X again - keep going until you find the cause.
    Andy

  • Final Cut Pro X die GPS Daten auf meinen Movie laden

    Hallo
    Ich habe mit meiner Conture GPS einen Movie erstellt nun möchte ich die GPS auswertungen in meinen Movie einfügen. Wie kann ich dies mit Final Cut erstellen ?
    Falls dies nicht geht, gibt es alternative Programme für den Mac.?
    Ich kenne nur Dashware, dies geht jedoch exklusive für Windows
    danke
    patrick

    GPS Meta-Daten solten in der Info zum Clip auftauchen …
    Final Cut Pro X die GPS Daten auf meinen Movie laden
    ... datt musste mir noch 'mal auf Deutsch übersetzen …
    Umgangs-Sprache hier ist übrigens English ....
    // English: does FCPX display GPS data? afaik, in the Info-tab ... //

  • Final Cut Pro: Audio has gone Missing!

    I imported .XML files to Final Cut Pro X. I am using a cannon plugin to convert files. The sound is evident until the clips become 100% imported and then there is only sound at the beginning of each clip but not the rest of it. Where do I find the sound?
    P.s. Both the dialogue and video boxes are both checked.

    Have you trashed your preferences? Use Preference Manager from Digital Rebellion.

  • Final Cut Pro X exports video clip as black

    Hi Everyone,
    I have a big problem, I'm trying to export a project with many HD clips, the first of which is the only one being shot as AVCHD on a Sony DSLR and converted to .mov by Voltaic HD because otherwise I can't import it in Final Cut Pro X. The rest of the clips are directly imported from another camera, no conversion.
    The first clip (the one I had to convert) plays and gets edited fine within FCPX, but after I export the whole project, all the part that had that clip is just black picture with no sound. My titles, photos in the meantime are still there, but otherwise all black until the next clips show up.
    The sources clips are hd1080p but I'm trying to export the project as 720p. My FCPX version is 10.0.9. I've edited videos from the same source and conversion before and never had this problem.
    So now I just took the same single clip into a new project and exported it at 720p and there it just works fine ... Arrrghh!! How can I fix this?

    I am having an almost identical problem:
    Trying to export (doesn’t matter to what: Master File, Apple Device, etc. all lead to the same result) the project I am working on is producing a black screen with no audio (for the length of the project) – only the start and end titles get rendered.
    The project plays fine in FCP X 10.0.9; the initial screen on the export dialog produces a correct looking screenshot (with both the picture and title visible), and predicts realistic sizes for the export file, which ends up being tiny by comparison.
    Other projects with a similar workflow are exporting fine: basically I have shot a couple of concerts, and each project is one song with start and end credits and some color correction, stabilization, etc.
    The source was 1080P video from a Canon SLR 5D Mark III, and it is being exported to 1080P -- however, I don't think that's relevant, because video from the same source to the same export files worked fine before - FCP X can obviously handle the format involved.
    I tried deleting the FCP X preferences -- didn’t help. I had already tried deleting the render files.
    Any ideas are greatly appreciated.

  • Final cut pro audio/video settings

    Hello everyone:
    I'm new to the forums and somewhat new to final cut pro.
    I'm using final cut pro 5.0.4
    Im trying to record to a dvd record using a Sony DVCAM, but I don't know what the settings are for the audio/video settings are.
    What I want to do so play the project from Final cut to the dvd.
    Can anyone help me please
    thanks
    sandy
    PS I tried to exported it as a Quicktime movie but it do not work because I have photos (slides) that move.
    Message was edited by: nomadrw

    This is the quick and dirty way of doing it. Read the manuals (FCP, Compressor, DVD Studio Pro) for more information.
    Control-click on the sequence name in your Browser in FCP, and select Export > Using Compressor. The sequence name will then show up in Compressor. Select the sequence name that just showed up, and then on the top of the screen select one of the DVD:xxxxxx settings for your project. I would recommend the Best Quality options. You will see 90, 120, 150 minute options. Pick the lowest that you can without it being shorter than your sequence. For example, if your sequence is 92 min, select the 120 min option. You will need an MPEG setting as well as the Dolby setting. Once you have selected your presets, set their destination - use Desktop for now. When you have selected the Settings and Destination for the sequence, Click "Submit" on the lower right of the screen. Batch Monitor will pop up, telling you the progress. When the job has completed, open up DVD Studio Pro.
    Once DVDSP loads, you will see on the left side of the screen two large icons in the Graphical tab window. Select each one, control-click on it, and select Delete. Now click File > Import > Asset and choose each one of the files you encoded to your desktop. You should have an MPEG and a Dolby file. They will then show up in the lower left of your screen in the Assets tab once you have imported them. Select both at the same time, then simply drag them to the open space in the Graphical tab. It will create an icon like the ones you deleted. Control-click on the new icon, and select First Play. Put in a blank DVD, and then go to File > Burn. Once this is done burning you will end up with a DVD that you just put in your player and it will automatically play.
    Like I said, this is quick and dirty. Read the manuals, play with different settings, and get comfortable with each application.

  • Is there a way to roll ab roll and cut between the two as in final cut pro which has multi clip

    Is there a way to AB roll as in Final Cut Pro which has multi cut

    There is another workaround that enables you to see 2, 3 or 4 videos simultaneously and make decisions about where to cut from one to another.  It's not the exact same thing as FCP's multiclip feature but it does work.
    Download & install Piero's QuarterPIP filter.  Place each of your videos on a separate track (up to 4).  Apply the QuarterPIP filter to each, placing each video on a separate quadrant of the canvas.  (You may have to sync their placement on the track if there is common audio among them.)
    You can then play the timeline and see all 4 videos simultaneously in the Canvas.  You can then place markers and make cuts & deleted unwanted portions of selected tracks as desired.  The limitation is that you can't just cut from one track to another on the fly as you can in FCP - you have to actually cut & delete the portions of the video tracks that you don't want in the final video.
    When you are done you can remove the QuarterPIP filters and will be left with one resulting video.

  • Final Cut Pro X Speeding Up Clip Dropped Frames

    Hello there!
    I record Xbox 360 gameplay through a Hauppauge HD PVR into EyeTV3.  I then export those clips using EyeTV3.  Then, I import those clips into Final Cut Pro X.  In the past, FCPX used to work through these clips incredibly fast and I never had any problems changing the speed in the timeline.  Now, however, FCPX runs really slow, sometimes crashes upon startup, and most annoyingly, drops frames...a lot.  I import the file and put it in the timeline, and even without changing the speed, it often doesn't even render the whole clip, but rather just appears to 'miss' 3 or 4 frames, which is very annoying.  It gets even worse when I change the speed of the clip (namely, speed it up).  I know it is not an EyeTV3 problem, because I watch the clips just fine after exporting in QuickTime.  I have tried exporting as H.264 an HD 720P, but nothing seems to work.  And I don't understand why it used to work flawlessly until now.  It is really upsetting and I am at a loss as to how to fix the problem.  All help would be appreciated.  Thank you very much.
    -TitanVex

    I have a feeling Tom's going to have you for breakfast!
    (Could be wrong though - all double-dutch to me).
    Andy

  • Final Cut Pro Won't Open, bounces once in dock

    I am running Final Cut Studio 2 and everything has worked perfectly for about 6 months. When i started up my computer today I clicked to open Final Cut Pro and i t just bounced once in the dock, then did nothing. All the other studio programs(motion, soundtrack, color etc...) open up just fine. I have not run any updates in a few weeks, infact, that computer isn't even hooked up to the internet. I tried deleting the preferences, opening up form the applicaitons folder and double clicking a project file and final cut still just bounces once in the dock and then does nothing. A safe boot didn't do the trick either. Does anyone have any ideas as far as what i could try short of doing a re install of final cut studio?

    tried deleting the preferences ...
    When you say "tried" do you mean you did? which files did you trash, or which app did you use to do it? I'm liking "Preference Manager" for this at the moment (http://www.digitalrebellion.com/pref_man.htm)
    Also as a troubleshooting step you might want to create a new OS X user account, log in to it, and then see if FCP will launch in that new account.

  • 16:9 movie exported from Final Cut Pro X showing up as 4:3 movie in iDVD

    I have exported a movie from Final Cut Pro X in 16:9 and when I open it in iDVD (also in 16:9 mode) it shows up as a 4:3 video.

    SD video?
      http://www.fcpbook.com/Video9.html

  • I am trying out Final Cut Pro X and trying desperately to import a project from iMovie 11 (version 9.0.9). There is no export to FCPX in iMovie 11 nor is there import from iMovie in FCPX.

    Can someone please help me?
    I am trying out Final Cut Pro X on a 30 day trial. So far so good.
    I am now trying desperately to import a project from iMovie 11 (version 9.0.9) into FCPX.
    I have read multiple posts on this subject and they all recommend File/import/ from iMovie project in FCPX
    However there is NO such option under File/import in FCPX - nor is there an option to export to FCPX in iMovie 11
    Can anyone please enlighten me.

    The current version of FCPX does not work with that version of iMovie. You need version 10.0.3, which allows you to send a project to FCP.

  • Exporting Final Cut Pro audio for importing into Avid via OMF

    Greeting Colleagues
    I'm just wondering if there are any special consideration when creating an audio OMF in Final Cut Pro for importing into a PC based Avid edit suite.
    best
    Aldo

    Answered under Final Cut Pro thread.

  • Final Cut Pro 7.0.3 problems importing 12fps movies

    I open an Image Sequence in QuickTime Pro 7 and save it as a movie at 12 fps.
    I import that movie into Final Cut Pro 7.0.3 in a sequence with timebase of 24fps.
    Problem : the first frame of the movie appears only on 1 frame instead of 2, and the last frame appears on 3 frames instead of 2.
    Anyone else seeing this problem?
    My work around is to make a 1 frame Freeze Frame of the first frame and add it at the head of the movie and then delete the third copy of the final frame. It's a tiresome work around though because I'm making animated films and have hundreds of these clips to bring in to Final Cut.

    Sharon, very sorry, I apparently have mislead you. Still sequences I do in Motion. There may be other ways of grabbing still sequences. The exported movie relies on frame rate of the composition.
    After Effects does it, too.
    after effects help entry: Change the frame rate of a sequence
    When you import a sequence of still images, it assumes the frame rate specified by the Sequence Footage preference in the Import category. The default rate is 30 frames per second (fps). You can change the frame rate after importing by reinterpreting the footage item:
    Select the sequence in the Project panel, choose File > Interpret Footage > Main, and then enter a new value for Assume This Frame Rate. 

  • Final Cut Pro Audio won't play

    I am making a slideshow with final cut, and every now and then I run into a song that won't play audio. I looked at the audio levels on the clip and they just aren't there. The music will go into final cut from itunes, but the actual audio isn't there. It works well when I play the song (in Itunes, or out of the final cut music and sound menu), but not when it is in the video. This only happens for a few songs though, any help??????

    Hi Druw77
    I have had that for months and months , I have found now a quick way to get around it, but it's not a solution is to press cmd f12 at the same time and then hit render again. I should get you around the problem for awhile but I suspect you need to reboot the software as i have done on many occasions!
    Sorry no one has helped me with the solution has yet and seems to be a problem with a few editors I know as well.
    Later

  • Final Cut Pro Audio Problem

    We recently had a problem with mastering a digital beta tape using FCP 3.1.
    The final audio mix was brought in as a wav file. Playing the file through quicktime, worked fine, however there were very specific sound FX that would not play back through final cut or our system. I even exported the clip from FCP and made a movie in the Black Magic Decklink codec. That file played the auido just fine from the desk top, however when I brought it back into FCP, and tried to lay it off to tape, the same SFX dropped out of the sound track.
    So we isolated the sound that wasn't working, and brought it in. The same problem persisted. We then exported the sound file so that instead of having audio in only one channel of a dual channel audio file, we just made it a monochannel sound, and put it in one channel only of our time line.. and THIS WORKED!
    So I have a fix, but its the problem that we dont understand. We need to make sure that this sort of thing doesnt lead to larger problems in the future and would really like to get to the bottom of it. If anyone could help us out with this please do!
    -A

    Betcha dollars to doughnuts it's a phase problem. This explains the reason it works in one channel and not in both.
    Suggest you invite your audio guy over and play it for him on your system. And let him fix it for you.
    WHERE in the chain of events this originally occurred is the tricky part. But it ought to be fun sort of mystery to unravel if you've got the time before deadline to get it properly sorted.
    Good luck with it. Let us know.

Maybe you are looking for