Final Cut Pro - does it come with a DVD Authoring Software

Hey guys!
I'm just planning to change my Windows to a Mac.
I was looking around for a DVD Authoring Software and everyone was suggesting DVD Studio Pro. So I looked it up to get it's price but I couldn't find it at all. I would really appreciate it if someone could tell me where DVD Studio Pro is available. It would also be great if you could suggest any other DVD Authoring Software compatible with Mac OS.
Thanks very much!

You either have not drunk the kool aid or did not get Apple's version of the future memo.
The DVD is dead according to Apple corp. And, they are doing everything possible to sweep it away. DVDSP has been discontinued.
If you want to stay with Apple apps, your options are iDVD or  Compressor 4 ( limited menus). Otherwise, start looking at the Adobe CS suite (particularly Encore).
Welcome to the brave new world.
x

Similar Messages

  • Final Cut Pro does not work with Yosemite. Can it be fixed?

    Final Cut Pro does not work with Yosemite. Can it be fixed?

    Hi Tom, I don't know if you can help me.
    I'm using Final Cut version 10.1.4 with Yosemite 10.10.2 and whenever I open FCP it opens for about 5 seconds (not allowing me to click anywhere) before closing with the message  "Final Cut Pro quit unexpectedly. click reopen to open the application again. This report will be sent to apple automatically." I have tried opening it multiple times and the same thing has been happening over and over again and i've tried everything I could find on the internet and nothing is working.
    HELP.
    Jada.

  • Will final cut Pro 7.0 work with ATI Raedon X1600

    Will Final Cut Pro 7.0 work with a ATI Raedon X1600 Graphics Card

    If you want to check other applications for compatability:
    http://roaringapps.com/apps:table

  • I have a MacBook Pro,  does it come with antivirus software already installed?, I have a MacBook Pro,  does it come with antivirus software already installed?

    I have a MacBook Pro, does it come with antivirus softwarealready installed or do I need to purchase it.

    No. You don't need it. But if  you did you could use the freeware ClamXav 2.2.1.

  • If I own a Macbook pro and an iMac can I have final cut pro downloaded to both with one purchase?

    If I own a Macbook pro and an iMac can I have final cut pro downloaded to both with one purchase?

    If you purchase Final Cut Pro X at the Mac App Store, you can install it in all your Macs free of charge as many times as you want. The same applies for all the applications you purchase at the Mac App Store

  • I am putting together a proposal for a Final Cut Pro Workstation to use with a tapeless HD camera.  Can anyone suggest the best camera (in the 5-10,000 dollar range) ?  What hardware and software should I include in the package?

    I am putting together a proposal for a Final Cut Pro Workstation to use with a tapeless HD camera.  Can anyone suggest the best camera (in the 5-10,000 dollar range) ?  What hardware and software should I include in the package?

    This is quite an open suggestion, but here are some ideas which might get you started.  There are good HD cameras in your price range from Sony, Panasonic and Canon (and maybe other manufacturers). Tapeless formats vary.  I have only worked with Sony XDCAM which seems pretty good to me.  File sizes for material shot at 35MBS are not too huge and, with the free Sony transfer and conversion programme, are easy to bring into the computer via USB direct from the camera or from a fairly inexpensive converter.  The Sony XDCAM EX3 can produce results well up to broadcast quality.
    As to hardware, you'll need a powerful MAC - iMac, Macbook Pro or MacPro with 4GB or more of RAM and a good video card.  Softwarewise, FCPX is quite a bit cheaper than FC Studio 3 and of course it's 64bit and can make better use of multi-core machines than FCP7.    It's also designed to handle HD formats with less hassle than FCP7 and is matched to the latest versions of Motion and Compressor.   But you'd probably be wise to search reviews of FCPX before you make your choice - it has some issues.
    A good HD monitor will be essential and, for colour correction etc, you may want to consider a second monitor or HD TV foe editing. ( A MacPro is generally the best machine to connect a second monitor to). 
    This should give you a good editing system, but there are many other things you could add (Photoshop, professional sound monitors, etc)
    Hope this helps a bit.
    Jonathan

  • When you uninstall final cut pro does your projects delete too

    When you uninstall final cut pro does your projects delete too

    No, only the app is removed.
    The Events and Projects are completely untouched and ready to use when you reinstall or update FCP X.
    To uninstall simply drag the FCP X application icon to the trash and delete it.

  • How to install final cut pro 5.1 which is on dvd disk's on macbook without dvd rom?

    how to install final cut pro 5.1 which is on dvd disk's on macbook without dvd rom?

    Are the images just on the desktop, or are they actually opened?
    See this:
    http://www.lafcpug.org/phorum/read.php?1,251129,251160
    That's how I did it and it works for me.
    Good luck.

  • HT4682 Does anybody know if Final Cut Pro X is compatible with, or equipped to receive input from MovieBox DV?

    I borrowed a MovieBox DV (by Pinnacle Systems) to try to digitize analog video from my Super 8 video camera cassettes onto my new iMac. I followed the MovieBox instructions to connect the analog video camera to the MovieBox DV and then onto my iMac. I opened first Final Cut Pro X and tried to import the digitized video, but my iMac does not seem to be recognizing or receiving the digitized input from the MovieBox DV.
    Does anybody have any suggestion on how to make this digitization work?
    Thanks,
    Novice1965

    FCP X needs a source with timecode, which means that you probably need some other tool to ingest your footage.
    Quicktime Player can probably do it (File->New Movie Recording).

  • HT201109 Final Cut Pro 10.1 crashes with Motion 5.1 custom Scrolling text and Graphics titles

    Dec 29, 2013 1:33 PM 
    found out why Final Cut 10.1 won't load my custom titles without crashing. When scrolling text in Motion 5.1 if you ad a graphic to scroll with the text Final Cut 10.1 will crash. If I remove the graphic in Motion and then load it into Final Cut 10.1 it will work.
    So Graphics and scrolling do not work. The graphics are .jpg, .png, .tiff, .psd. I don't know how to fix it. Hopefully someone out there does.
    Dave
    Final Cut Pro X, OS X Mavericks (10.9.1), 2.8 GHz Intel Core i7 & 16 GB Ram 
    Final Cut Pro Quit Unexpectedly
    Process:         Final Cut Pro [4123]
    Path:            /Applications/Final Cut Pro.app/Contents/MacOS/Final Cut Pro
    Identifier:      com.apple.FinalCut
    Version:         10.1 (238755)
    Build Info:      ProEditor-23875005025000000~5
    App Item ID:     424389933
    App External ID: 223682791
    Code Type:       X86-64 (Native)
    Parent Process:  launchd [175]
    Responsible:     Final Cut Pro [4123]
    User ID:         501
    Date/Time:       2013-12-28 12:37:04.233 -0500
    OS Version:      Mac OS X 10.9.1 (13B42)
    Report Version:  11
    Anonymous UUID:  E080EF73-4EC7-F729-7343-2C37817936C6

    Thanks Tom for the advice. I have four external hard disks, all of them formatted with Mac OS Extended Journaled. On all devices (2TB) I have more than half free space. They are connected either with Thunderbolt or USB3 cables. Different manufactures:  LaCie, Toshiba, WD and Samsung. I face the same crash problem if I connect a UBS drive 16GB or a any other device to the USB ports including the Sony Video camera connected with a USB1 cable. Same problem on ALL my computers! To work properly, I have to disconnect all USB devices and work only with internal hard disks. I also tried to format the MacbookPro (erasing the partitions with a new installation) but I have the same problem. I really lost hope...

  • Looks like final cut pro does run and "runs well" on macbook

    http://www.creativemac.com/articles/viewarticle.jsp?id=43717
    "Contrary to the bizarre rumor, the MacBook can indeed run Final Cut Pro, and it can run it quite well, if these tests are any indication. For Final Cut Pro, we ran four individual tests to compare performance on a variety of functions and in both HD and SD. In most cases, the results were fairly close. The 13-inch MacBook beat the dual G5 in two of four tests, tied it in one and lost out by one second in another. All of the tests were rendering tests, which, of course, doesn't tell the whole story. But it does give a good indication of the power of a computer's CPU."

    Final Cut Pro while it does run it is not supported to do so.
    Please be aware also that the report only tested functionality that is not impacted by the GPU. For instance, the MacBook will more than likely fall flat on its face, comparitively, when faced with real time effects. Using FCP is not only about rendering and encoding speeds. There are other hours, day, weeks etc infornt of FCP that does not involve neither rendering or encoding.
    It is a skewed report that does not taking into the account the actual "using" of FCP.
    As a cheap alternative to an MBP for portability reasons… the MB will be fantastic.

  • Final Cut Pro does not export

    I'm having problems exporting with Final Cut Pro. When I go to the share menu, export movie simply does nothing, and if I try to export directly to vimeo or apple devices, it gives me this error: com.apple.Compressor.CompressorKit.ErrorDomain error -1. I checked in Applications and I have compressor, and if I open it, it works just fine. Already disabled the app nap in both final cut and compressor and it solved nothing.

    You don't need to render before export.
    Rendering is for playback.
    If your project plays OK from the storyline, you can safely turn off rendering in preferences.
    Andy

  • Final Cut Pro 5.1.4 with leopard Urgent help!

    a few days ago i installed OS X 10.5 (Leopard) on my 1.25GHz PowerPC G4 (2 GB RAM) using the "Erase and Install" option and today i copied the Final Cut Pro 5.1.4 application onto my desktop from a backup i had. Now as soon as is try to open the application it immediately quit!
    Here is the log:
    Process: Final Cut Pro [120]
    Path: /Users/Robs/Desktop/Final Cut Pro.app/Contents/MacOS/Final Cut Pro
    Identifier: com.apple.FinalCutPro
    Version: ??? (???)
    Build Info: FCPApp-702211411~2
    Code Type: PPC (Native)
    Parent Process: launchd [64]
    Date/Time: 2008-01-02 14:41:03.119 +0200
    OS Version: Mac OS X 10.5 (9A581)
    Report Version: 6
    Exception Type: EXC_BREAKPOINT (SIGTRAP)
    Exception Codes: 0x0000000000000001, 0x000000008fe0105c
    Crashed Thread: 0
    Dyld Error Message:
    Library not loaded: /Library/Frameworks/ProFX.framework/Versions/A/ProFX
    Referenced from: /Users/Robs/Desktop/Final Cut Pro.app/Contents/MacOS/Final Cut Pro
    Reason: image not found

    They only added Leopard support to the latest version (6.0.2) I'm afraid.
    Per the following KB article, FCP 5.1.4 and above are supported on Leopard: Final Cut Pro 4.5: Not supported on Mac OS X 10.5 Leopard
    To the OP: you did the correct thing by doing a clean install of Leopard, but you must also reinstall Final Cut Studio from the install discs in order to have a properly functioning copy.

  • Final Cut Pro 5.x compatible with Leopard?

    Sorry if this has been asked loads of times but I could not find the posts here.
    Does anyone know if Final Cut Pro 5.x and DVD Studio Pro 4.x are compatible with Leopard?
    Thanks,
    Rob

    I don't know what terms you ** SEARCHED **
    But the list referenced above (click on the term searched) has quite a few.
    If you work with FCP/ Logic/ ProTools, etc in any professional capacity, you may want to wait until the fallout settles. This is especially true if you use 3rd party cards & drivers. Otherwise, get a new drive and install everything from scratch.
    x

  • Final Cut Pro X and Macbook with 9400M chip. Has anyone tried it?

    I have a late 2009 Macbook with Nvidia GeForce 9400M graphics chip. I've got 4 gig RAM installed. Apple lists this chip as working with Final Cut Pro X. Has anyone tried it on a Macbook? Is the performance adequate or should I wait until I get a more powerful laptop?

    Yep, I've got a Macbook with that chipset and it runs FCPX. It's not blindingly quick but it work.

Maybe you are looking for

  • How do I use a second computer as a monitor?

    Hi, I have an iMac and a MacBook Pro. I want to primarily use my iMac and use my macbook as a monitor. I'm a musician and I want to run Ableton on one screen and maschine on another. For some reason I can't find any forums explaining this, unless I'm

  • Line item id in Account document segment

    Hai gurus, I need a clarification on line item id. It is used in Accounting document segment. You can find it in table BSEG and field is BUZID. Actually it has A " Asset B " Warehouse stock order C " Warehouse stock order assigned K " Vendor F " Deli

  • Quality of generated image

    I am creating .gif files using the ACME api and the standard Java 1.41 api. The purpose is to generate images containing text to publish on a website. This all works fine, but when I create images with fontsize 12 or lower, the quality becomes quite

  • How do I save a document without it saving the text/object box outlines?

    Is it because I'm using the trial that I can't save a document without it showing the outline of every text/object box? I've not selected all, but that's what the saved document looks like...

  • Save track as mp3 format - how?

    I want to create a track using logic express  8 and save it as an mp3 file to upload to a Sparkol video. Can anyone point me in the right direction? Thanks