Final cut pro x dissolves not working

Final Cut Pro X,  dissolves not working, When I use Ribbon, Heart ect, they showup on the video flickering, will not allow me to render the video, any help would be greatly appreciated.

Sorry. That should be what's the media? What are the project properties?

Similar Messages

  • Final cut pro HD 2 not working with new updates

    recently purchased a new imac. Most of my old programs were not supported. I updated to 10.9 from 10.5. Now, all the programs are running except Final Cut pro HD 2. I get a message sayin"power pc applications are no longer supported" Any suggestions? I read in an old discussion (from 2011) that I might need to download Rosetta?

    MichelPM wrote:
    ... or you maybe able to run your version of Final Cut under virtualization software.
    I do not know which version of FCP the OP is using as I do not recognize his designation of Final Cut Pro HD 2.
    However, last weekend I attempted to install Final Cut Studio 2 (Final Cut Pro 6) into Snow Leopard installed in Parallels, as a test.  It failed!
    Final Cut's installer suggested the following problems: not enough VRAM - 64 needed; 0 present (even though Parallels is set for more than the minimum required VRAM); and a missing video card.
    I attempted to work around this problem by using Pacifist to install FCS2, which worked, as far as the installation was completed.  However, when I attemped to run FCS2, a dialog box came up with indicated that same two problems and then it quit.

  • Final Cut Pro 2nd monitor not working properly?

    Been here before a long time ago, can't remember how it was resolved.
    Working in a new edit suite, FCP Studio.  Two new Samsung monitors (not my choice).  I want one to be my playback monitor.
    I set:
    Final Cut Pro > Audio/Video Settings
    > Digital Cinema Desktop Full Screen
    > View > External Video > All Frames
    But all I'm getting is a black frame on the 2nd monitor.
    They've also got one of those very flat alluminum keyboards ... where F12 becomes a sound control.  I'd love to know how I can change the function key to work as an FCP action / 2nd monitor toggling on and off.
    That's two questions.  Would be most appreciative of an answer for either.
    Ben

    Hey Andy,
    I did the first half of your suggestion, but not the second half.  Heading down to the studio this morning ... set up in a tiny white chapel looking out across the silvery North Atlantic ... and will try the second half of your suggestion.  Will also see if there are two graphics cards installed in the Mac Pro.  Will also check out the Window > Arrange in FCP (something I should have checked first off).
    I talked to a filmmaker who previously worked on the system, only to discover he never uses the second monitor as a full screen, but rather as a large 'bin'.  Interesting.
    If worse comes to worse and I can't solve it I suspect I could size the canvas window to super large and drag it over to the second monitor.
    Will post back when I've tried the latest suggestions ...
    Thanks you mucho guys,
    Ben

  • Final Cut Pro X Export not working

    Running Final Cut Version 10.0
    Just upraded to OS X Mavricks.
    Go to export project in Final Cut - nothing happens. It's as if I clicked on nothing. Tried using the shortcut command+E - also nothing.
    Export Audio works but not Export Movie.
    Tried exporting using Compressor but given that program is a $50 piece of garbage, that didnt work either.
    What gives???

    Ok, found it !
    First of all, update FCPX. Then, you will not found your project. It's normal, it was my problem. But, the answer is just here: you need to udpate you file too. It's explained here: https://discussions.apple.com/message/24788882#24788882
    Tell us if it's working.

  • Final Cut Pro Trial does not work, drr nicht erkannt

    Trial download answers with a mistake note "Final Cut Trial 10-0-3.drr nicht erkannt.
    Was solll das, wenn schon die Trial Installation nicht funktioniert wie soll es dann das ganze Programm !??

    eifelipad wrote:
    No, I have everything required on the computer, but .. .
    nope.
    FCPX braucht 10.6.8 mindestens, lt Deinen specs fährst du noch 10.6.3

  • Final Cut Pro and Compressor not working

    I know this has been asked before, but I didn't find a solution to my problem yet.
    Ever since I upgraded to Mavericks, I can't export any movies.
    I get the following message: The operation couldn’t be completed. (com.apple.Compressor.CompressorKit.ErrorDomain error -1.)
    And when I send the movie to compressor, I get the video rendering error: 60.
    I'm at a loss and would really apprecciate your help.
    Thanks

    It's probably the flux capacitor ... just give it a gentle but firm tap about 2 inches below the indent (just behid the mounting bracket) ... don't leave the tap on when you go out though or you will flood the bathroom.
    Hope it helps
    Andy

  • EOS MOVIE Plugin-E1 for Final Cut Pro Plug in not working?

    Can anyone tell me the proper procedure for installing a plug in to FCP? Ive tried installing the above plug in, but when i goto log and transfer no thumbnails come up and nothing transfers?? Am i installing the plugin wrong, or is there an issue with the plug in??

    This guy is having the same problem:
    http://discussions.apple.com/thread.jspa?threadID=2491897&tstart=0

  • Will Final Cut Pro 4.5 still work if I upgrade to Mac OS X v10.5.4?

    Will Final Cut Pro 4.5 still work if I upgrade to Mac OS X v10.5.4?

    I'm with Jon on this one. I know someone who uses FCP 5.0 on a MacBook Pro, he has all sorts of wierd issues including:
    Projects he has created throwing up an error message "Unreadable on this machine" when re-opened.
    Projects losing and refusing to connect to render files.
    Dissolves simply not working -this is not to do with lack of handles, it just happens.
    LiveType and FCP's own title generator files not automatically compositing.
    Lots of kernel panics and unexpected quits.
    These might not happen all the time, but always crop up at the worst possible moment.
    I can move his project files and media to my setup and everything works.

  • Send to - Final Cut Pro XML data not seeing my Color render

    Sup folks,
    As always I did some lurking on these boards and consulted the manual about this issue.
    Nada.
    I've rendered my shots. They were all queued. They were all rendered.
    When I use the Send to -> Final Cut Pro command I get the "not all your clips were rendered" warning. I click yes to see what I will get.
    FCP imports the XML data and I get nothing. All of the clips in my FCP timeline generated through the Send to -> Final Cut Pro command are all of my original media prior to my color workflow. Not my graded Color renders.
    I did move my renders from a local drive to an external because of data capacity. After doing so I did update my Media, Render and Project paths to the new location of my media.
    I thought that would fix my problem. It didnt.
    So again: my issue is that even with my shots all rendered correctly (i checked them in QT) the XML being sent to FCP through the Send to -> Final Cut Pro command is not hooking up with my renders.
    Deadline tomorrow.
    As always,thanks for your time

    I did move my renders from a local drive to an external because of data capacity. After doing so I did >update my Media, Render and Project paths to the new location of my media.
    If I'm following the sequence correctly, you rendered your material to a local drive. Then you moved it, changed the paths (in COLOR), and then tried to "Send to... FCP". Is this correct? If so, doomed to failure. In your case, you may have even moved an empty folder.
    There is an ironclad and non-negotiable series of events in rendering and initiating the roundtrip. Many users regard this as a "bug". One of the first things that a user should always do is set up all the target paths before even doing the first grade. But it is essential that the target render path be set up PRIOR to loading the Render Queue. COLOR creates the receiving folder at that time, and that is where the media will go no matter what you do after the RenderQueue is loaded. Change the path, change the format... change whatever you want... the deal has been done, and all will be ignored. However, once the media is rendered and you choose Send To... FCP, then the original XML that FCP sent will be modified by COLOR and passed back to Final Cut. COLOR does NOT,repeat, NOT generate EDLs, XMLs, or any of that stuff. It only modifies original lists. That you modified the Media, Render and Project paths (probably only in the User Preferences tab) is meaningless once the project has been rendered. The Render path for this individual project is determined in the Project Settings pane, along with the render dimensions and format. However, COLOR will observe a path change AFTER the render, and edits the XML re-export to try to find the media in the newly named directory. Of course, your media is actually elsewhere, and you get a blank sequence.
    Lastly, make sure that you SAVE the project after renders, to retain the "rendered" clip status -- or COLOR won't remember any of this.
    jPo

  • Why Final Cut Pro Trial does not save works?

    Hello, I downloaded the trial version of Final Cut Pro yesterday. Seems interesting, but does not save any work I do. Does this depend on the fact that it's a ''trial''?  thanks  (I use a MacBookPro3,1, with OS 10.6.8). Thanks

    thanks Ian,
    I discovered that the problem comes from a corruption of the desktop database, which I repaired with DiskWarrior. Unfortunately it occurred again, two more times and now, the third, this trick is not working. I realized the projecs files are saved in user>films>Final Cut Projects but I cant't find the way to make FCP recognize ad ''see'' them....

  • Final Cut Pro Video Playback not in Widescreen for Anamorphic Material

    I have a Panasonic DVX-100B hooked up to my computer and am running Final Cut Pro. I shot everything in the anamorphic squeeze mode. When I play this material back through my camera (which displays the material as widescreen because I forced it on the camera menu) it doesn't playback on the TV in widescreen, it stretches it back out vertically. Is there a setting in Final Cut that will send the signal as a 16:9 signal to the TV, so that it will understand it correctly?

    baadayakazi wrote:
    Is there a setting in Final Cut that will send the signal as a 16:9 signal to the TV, so that it will understand it correctly?
    No, FCP does not send out an anamorphic flag via firewire. What I mean is, it sends out the video to your deck simply as 720x480, without telling the deck (and therefore the monitor, as well) if that is supposed to be a 16:9 or 4:3 image. In order to monitor with the correct ratio, you'll need to have a monitor that can correct for aspect ratio.
    If you're working on a pro monitor, it should have a 16:9 button (or menu setting, at least). Some recent - as in the last 4-5 years - consumers TVs also have an anamorphic squeeze feature that will compress the image vertically. If you've got a 16:9 TV, you'll need to use the stretch feature (of all things) to correct your preview image.
    All that said, I'm guessing you fall into the last camp: you're previewing out to a consumer TV that cannot do vertical compression? If so, your only alternative is to nest your anamorphic sequence in a 4:3 one for preview purposes. Of course, this is needlessly cumbersome (and you run into the dreaded issues with nests failing to update every now-and-then) and requires more CPU horsepower. Either that or edit with the distorted image...
    Or are you in a whole 'nother situation?

  • How did i get final cut pro 5.0 to work on mac book pro

    anyone know why its working fine?? i just put the disk and it seems to work beautiful...

    There is nor reason for it to not work, most PowerPC applications will work on the new Intel based systems. The 5.1 update for Final Cut Pro is meant to run a lot faster thats about it (other than possibly some bug fixes).

  • Final Cut Pro 4 won't work on my new Macpro

    I just bought a brand new Macpro and loaded Final Cut Pro v4 that I used successfully on my G4. It came up with a message that said, among other things, that I need a AGP Video graphics card for this software to work, and my computer did not have it.
    Is it necessary to upgrade to the new Final Cut Pro 6 by buying the Final Cut Studio 2, and will that software work on my MacPro? Or is there an AGP Graphics card I can buy and install?
    Thank you.

    If you do a search in this forum, you'll note that there are many posts regarding problems with FCP 4 and Intel Macs. Primarily, FCP 4 was released before the Intel transition and was written specifically for the Power PC processor. In order for a program to work natively on an Intel Mac, it needs to be Universal. Final Cut Pro 5.1 is the first Universal version.
    There are also a number of reports regarding incompatibility with FCP 4 and Quicktime 7.
    Final Cut Studio 2 works really well on our MacPros here, so it may be worth the upgrade for you.

  • Ilife Sound Effects and Final Cut Pro Sounds are not appearing in Final Cut Pro X anymore!?

    Hello,
    I am new to the app Final Cut Pro X. And recently when I have gone into the Music and Sound Folder in final cut pro the option for Ilife Sound Effects and FCPX Sound Effects do not appear. I have read other forums and they have said to drag the sound files into FCPX but that isn't even a option. It onlt has iTunes options, please reply back someone this is stressing me out. I don't know if it is because of Mavericks or whatever but it is driving me insane and I need help!
    This is what it looks like .

    This is a known issue in FCP X 10.1 and you will find many posts about it in the forum just do a search. Several solutions have worked for different users. Try the following:
    1. Open and close GarageBand then relaunch FCP
    2. Open and close iPhoto then relaunch FCP
    3. Close and reopen FCP
    4. Trash FCP preferences then relaunch FCP
    Any one of these may work. Just try them in any order. Be aware the problem may recur.

  • Final cut pro x trial not installing

    Ok so when i first got my laptop i tried downloading final cut pro trial but it would always say  "invalid checksum" when verifying. it happened multiple times everytime i always tried to install it, until one day I'm not sure what i did that it finally downloaded. i used it until my trial was over so i bought the full version the begininng gf this month. i tried installing it and it would download all the way until it changes to installing and then it says "download failed try downloading again in the purchases page" this has been happening the day since i bought final cut pro. now its been 3 weeks and still nothing works, i have chatted with technicians online and have taken it to the apple store and they keep saying they don't know why final cut pro isn't installing because the laptop is working fine. so anyway i got my refund on it, but now I'm trying to install the trial but it keeps showing up invalid checksum when it verifies it,so i click skip and it will start writing the files but then in the middle it will stop and say " failed to download....contact the developer". honestly i don't know what to do anymore i need this app to do school work and I'm really frustrated that nothing seems to be working. any suggestions would be greatly appreciated! thanks.

    Well when i took it to the apple store they ended up restoring the whole computer because it wouldn't update so they ended updating it and they said that final cut pro should download fine now since it was updated. i took it home and tried it but nothing happened. i live quite a while away from the store so i called a technician and they told me to wait a week to see if it would download, i waited a week and still nothing happened. and for the parental controls it says there are no user accounts to be managed so i don't think there is any parental controls. So the technicians at the apple store would be able to install it from the system drives?

Maybe you are looking for