Final Cut Pro X sharing and exporting issues?

Hey!
Okay so I made a Wedding video for my cousins wedding a couple of days ago. I want to share it to Facebook. I do everything correctly then it says " Preparing media for share.... " and it's loading. Then it just stops doing that and goes back to normal like I never shared it to Facebook. I checked my facebook and nothing was there. It's a 12 minute long video, so then I try YouTube. Same thing. The password and emails went through for both of them, and I also tried the lowest quality. Still the same thing! So now i'm looking for the export to just save it as a quicktime movie. I can't find it! I watched tutorials but it says I have to export from the share button above. It's not there, it's only there under file and only has the options for facebook, vimeo, youtube, apple devices etc etc.
Can someone please help me? Thank you

Watch Macbreak Studio Episode 194 and or Episode 203 where they show how to setup sharing presets.

Similar Messages

  • Final Cut Pro Problem playing and exporting

    I am having problem playing and exporting in final cut pro. I made an animation in maya and used batch render to render a folder of images then imported the folder to final cut pro but it doesn’t play properly in the video window or even when I exported to quicktime. Do u know why?
    Please give me your response asap.
    Thank you very much!

    As the link that Russ posted describes, use quicktime player to open the image sequence and then do a save.  Bringing in an image sequence directly into fcp will cause extreme performance problems in my experience. 
    Describe the setting (pixel dimensions, color space, etc) of the original files.  One important question is whether there is an alpha channel associated with the files.  You may want to change the codec when you do the save in quicktime player to something more fcp friendly like one of the flavors of prores.

  • Final Cut Pro 4.5 and Quicktime 7 compatibility issues. Error 39!

    I see some people saying Quicktime 7 is not compatible with Final Cut 4.5 and some saying it is.
    I upgraded to 10.3.9 and then Quicktime 7 and I started getting error 39 at this one spot in my timeline and then crashing if I tried to play just a few seconds ahead of that spot. I tried trashing the prefs but that didn't do any good. The individual files play fine outside the timeline so it isn't corrupt media. I tried rerendering the effects that are at that point but that didn't help. I tried copying the entire timeline to a new sequence and that didn't help.
    The strange thing was that when I took the part of the movie that was having trouble and deleted it from the timeline it still got error 39 when just playing over the empty timeline where the media used to be! This led me to realize that the problem lay in some Quicktime audio effects I had about a second in front ot the error 39 spot. I took off the effects from that audio but it didn't help. Then I deleted that audio from the timeline and just pasted it back in from the original clip and then it finally got to working.
    Now I know nothing about the software, but I thought there might be some connection between the fact that I had effects that FCP labels as "quicktime effects" on there from my days in Quicktime 6.5, then upgraded to Q7, and perhaps those old effects don't work in Q7? I don't know.
    So, my immediate problem is solved but I thought this experience may be of use to someone else. And perhaps some compatibility issues can be brought to light.

    I would assume the Software Update program has sufficient logic within it to detect that my friend is running Final Cut Pro 4.0 and it would therefore be disastrous to install QuickTime 7.3, thus removing QuickTime 7.3 from her list of suggested updates. Would someone at Apple please fix this?
    Sorry, but Quicktime is a component for SO MANY things, not just FCP. Sorry, but the OS doesn't detect that older versions of software are on there and won't be compatible...this is where you need to have a little knowledge. And sorry, but you need to have a little knowledge. If things are working, DO NOT UPGRADE unless it has been tested and cleared. In the case of FCP 4...it has not.
    Rule of thumb...if you use older software, you have to stick to older versions of the OS and components that that software relies on.
    How many things were broken with Vista? So many that the HUGE community let out a cry and now XP is available again configured on machines or as a stand alone buy. And no, Vista didn't warn that certain applications wouldn't work either.
    You gotta research and find out. This place here...this forum...is a FANTASTIC place to find stuff like this out.
    BTW...Apple doesn't read these forums, only us users. Gotta submit feedback here:
    http://www.apple.com/feedback/finalcutpro.html
    Shane

  • HT4722 Can Final Cut Pro be purchased and downloaded more than once?

    Can final cut pro be purchased and downloaded on more than one computer?

    This is an excerpt from the FCPX license, available here.
    http://images.apple.com/legal/sla/docs/FinalCutPro.pdf
    2. Permitted License Uses and Restrictions.
    A. Mac App Store License. Subject to the terms and conditions of this License and as permitted by the Mac App Store Product Usage Rules set forth in the App Store Terms and Conditions (http:// www.apple.com/legal/itunes/ww/) (“Usage Rules”), you are granted a limited, non-transferable, non- exclusive license:
    to download, install, use and run for personal, non-commercial use, one (1) copy of the Apple Software directly on each Apple-branded computer running OS X (“Mac Computer”) that you own or control; and
    (ii) if you are a commercial enterprise or educational institution, to download, install, use and run one (1) copy of the Apple Software for use either: (a) by a single individual on each of the Mac Computer(s) that you own or control, or (b) by multiple individuals on a single shared Mac
    Computer that you own or control. For example, a single employee may use the Apple Software on both the employee’s desktop Mac Computer and laptop Mac Computer, or multiple students may serially use the Apple Software on a single Mac Computer located at a resource center or library.

  • I have Final cut Pro HD sequence and I need to burn this on a DVD

    I have Final cut Pro HD sequence and I need to burn this on a DVD, my sequence lasts 1 hr and 33 minutes. What are my options? Is it better to export as a Quick Time movie or using the compressor? I'm new to the compressor just learning, please help.

    Select your sequence in the browser window, go to the File menu and choose Export Using Compressor.
    When compressor opens, choose the DVD best quality settings, 120 minutes.
    For audio and video both, choose both the m2v video and the AC3 audio. (Dolby Professional)
    Choose a destination for your files, and hit submit.
    When it's finished, import these files into your DVD SP project, and make your DVD.
    Be sure to choose the 16:9 anamorphic settings.

  • Final Cut Pro 5.1 and a Macbook

    I am looking to buy Final Cut Studio. I was hoping to get some feedback on this question: Must you have a MacbookPro to run Final Cut Pro 5.1 (and the rest of Final Cut Studio), or will it run on a Macbbok without any problems? I would really like to hear from People who has actually have run Final Cut Pro 5.1 on a Macbook and what their experiences were. I know the Macbook does not have the ATI Mobilty Radeon X1600 graphics card like the MacBookPro does. So was that an issue for anyone?
      Other OS  

    Here's Apple's official position: http://docs.info.apple.com/article.html?artnum=303782
    However, there are several people running most of the Studio Apps successfully ... except possibly Motion. With FCS2, chances are Color won't run either. You should be able to search here for similar postings; this topic comes up frequently.
    -DH

  • Final Cut Pro 4.5 and Final Cut Express 3.0 - 5 minute captures then freeze

    Something I have found with Final Cut Pro 4.5 and Final Cut Express 3.0.
    After Updating to Tiger - 10.4.11 and Quicktime 7.4.1 - Both Pro 4.5 and Express 3.0 will not capture more then 5 minutes and 12 seconds. If you are having this issue the solution I used to fix both Pro and Express issues was an update on the software. Final Cut Pro 5 fixed the problem (or 6 if you can) and with Final Cut Express, version 3.5 fixed the issue but if you can go with FCX 4.
    Let me know if this helped or if you have found a different solution. Downgrading the os might help but that is too much of a pain and it's time to upgrade the software anyway.

    #29: Need AGP Graphics card
    Shane's Stock Answer #29 – Error: “Need AGP Graphics card”
    http://docs.info.apple.com/article.html?artnum=302667
    The Final Cut software is looking for a graphics card type that is required for that version of the software. FCP 4 and FCP 4.5 were released when AGP cards were the requirement. Attempting to open this on a Mac with a PCIe graphics card, such as an Intel Mac, will cause this error. FCP 4.5 is not supported on the Intel Macs. If you happen to have a PowerPC Quad processor Mac and get this error, you can try this hack:
    http://www.xlr8yourmac.com/feedback/finalcut_pro_on_oldmacs.html
    You can also press the "esc" key as you launch FCP. This enables FCP to open and run, but know that it might not work optimally.
    If that doesn’t work, or if you have an Intel Mac, you are going to have to upgrade to a supported version of FCP…and FCP 6, part of Final Cut Studio 2, is the latest version.
    Shane

  • I have recently purchased MacBook Pro with Mac OSX 10.7.3 Lion and I would like to install Final Cut Pro 6 Studio2, and it came up with this error: 'you can't open application FinalCutProStudio.mpkg because PowerPc apps are no longer supported..pls advise

    I have recently purchased MacBook Pro with Mac OSX 10.7.3 Lion and I would like to install Final Cut Pro 6 Studio2, and it came up with this error: 'you can't open application FinalCutProStudio.mpkg because PowerPc apps are no longer supported......Is there a way to run FCP6 on lion withoput this error? Any help would be appreciated.....

    Hi Shane,
    Just one more quesiton re: this topic, I am looking to get rosetta but do not have Leopard or Snow Leopard...
    I read that it is not on Snow Leopard only on Leopard....so do I need to get only Leopard? Can u advise?
    Alternatively I do have Mac OS X Tiger so is it on this and can I install it from here?
    Please excuse my lack of knowledge here, just trying to get my FCP 6 up and running asap....
    Best Rgds.

  • Final Cut Pro X Image Sequence Export missing frames per second option?

    I am using the trial version of Final Cut Pro X.  I can export an image sequence but it will only allow me to do so at 30 frames per second -every single frame! 
    So a 10 min movie takes half an hour to export 20,000+ frames that no one on earth has time to look thru.
    In my old Final Cut Express I was able to choose 1 or 2 frames per second, which was just right.
    What am I missing?
    Do I need to buy Quicktime Pro or Compressor to allow me to export image sequences without exporting every frame?
    Why would Apple even have an image sequence export if it only allows you to export every frame, or it that only in the trial version?
    Thank you

    I found a free option for you, if you don't already have Compressor 4.
    In FCPX create your movie. Then SHARE as a Master File.
    Get MPEG Streamclip, which is a free app available here.
    http://www.squared5.com/svideo/mpeg-streamclip-mac.html
    Drag your Master File into MPEG Streamclip.
    In MPEG Streamclip, select FILE/EXPORT TO OTHER FORMATS.
    In FORMAT: choose IMAGE SEQUENCE
    In OPTIONS, choose your frame rate.

  • I have a project in Final cut pro 10.5 and the spinning icon appears with every action and each action takes up to 30 seconds to respond to?

    I have a project in Final cut pro 10.5 and every action takes up to 30 seconds for the program to respond . The spinning icon stays up during this time?

    Are you using Mavericks. If so you should update FCPX

  • Final Cut Pro x how to export OMF?

    Final Cut Pro x how to export OMF?

    As far as I understand, FCPX doesn't support OMF exports, unless something has changed recently. There are some workarounds that you can do, see this post. It looks a little cumbersome though. Hope that helps you further.

  • Final Cut Pro X not completing export to blue ray

    Running Final Cut Pro 10.1.2, OS 10.9.4, Macbook pro I7 2.3 ghz, 16gig ram...  I can export a short sequence to blue ray from Final Cut Pro X and it works.  I have a 41 minute video that when I "share" to Blue Ray it will burn about 6-7 minutes of the 41 minutes without any errors.  It completes as if it worked but when you look at the video it is only 6-7 minutes.   A few portions of it are also pixilated, that's not the case when I'm viewing it. 
    Any ideas on the blue ray.  I have an external Pioneer Blue Ray burner which as I said works fine on short videos in Final Cut Pro X.  

    Hello Gary,
    Check out this thread for ideas.
    More than a few users have struck issues since 10.1.2:
                     Blu-Ray burning error after Final Cut Pro 10.1.2 update.            
    Al

  • Final Cut Pro Quitting Unexpectedly When Exporting Video

    Currently running Final Cut Pro version 6.0.6. Never really had a problem with anything. I am trying to export a video I edited of a show which is around 2hr. 30mins. In the past, I've exported this type of file and never had any problems, just took a little bit of time. Currently trying to export at the size of 1280x720 and when I do, Final Cut begins to export, gives me an estimated time, gets to about 9% and then quits. No reason why? I have never had this before on any of my machines. I currently have about 50GB of hardrive space free, so I am really not sure why. Any ideas or suggestions would be appreciated.
    -Matthew

    and you can export sections til you find the problem clip.
    You might also try creating a new sequence with the same settings, and copy everything from the problem sequence. This will sometimes resolve this kind of issue.
    Message was edited by: Michael Grenadier

  • Final Cut Pro X is neither exporting nor rendering!

    Friends,
    I finished working a project (film trailer), which is having a duration of 03 minutes.
    I already exported the project and uploaded it in the websites.
    But now again after a while when I tried to export the same project, its not getting exported.
    Final Cut Pro gets Quit always.
    I duplicated the project, deleted all the render files and did it again. But the same result.
    My other projects are getting exported and no big issues with rendering.
    The aspect ratio of the project I'm working is 2048*872 @ 24fps.
    Shot on red, converted it using RED Cine X Pro to Apple Pro res 4444.
    Is there any way to solve this issue?

    When I had a renderproblem, not exactly as yours, I turned off the background render. Then I marked first clip on timeline and used  Modify/Render Selection or the short key   ctrl-R. If that worked I rendered next clip until .in my case, I found a clip that caused the trouble. Perhaps you should test that. Then I replaced the clip fresh and all worked fine.

  • Final Cut Pro 7 crashed and will not open (only gives unusual error)

    Final Cut Pro 7 (from Final Cut Studio 2 installation) crashed sometime yesterday at 8 and any time it was opened it oulde give an error saying that this version of Final Cut wasn't supported by G4 and needed to be upgraded to G5. This is far from true though since it's been working properly and without trouble for about 2 months.
    Also, and I'm not sure if it's related or not, but installer.app stopped working after this happened. Of course, I want to know what could have caused this to happen. Could it have been from switching any settings or working with certain HD footage?
    It's a MacBook with Snow Leapord if that helps.

    yeah, you have to be careful with your terminology, otherwise you start a firestorm.
    Given the ONLY information we get in solving issues is what people write, accurate terminology is critical to solving the problem. If people need someone to read their mind, then they should to take their problem into a repair facility where the tech people can directly deal with the machine.
    Have fun.
    x

Maybe you are looking for