Final Cut Studio install

How much disc space does a full FCS install take including all loops, and templates?

My Installer for FCS 5.1 told me I needed 67GB of available space to install everything.
-Doug
P.S. Links to the online Apple store that contain a list of seemingly random numbers and letters will time-out after a few minutes. While they are active, someone who clicks on one here could add items to YOUR shopping cart. They couldn't check out without your password, but it could lead to a surprise the next time you do check out. It is possible to make a static link to most items at the online Apple store if you know the Apple part number:
http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore?productLearnMore=MA2 85Z/A
I've made a FAQ about this as well, here.

Similar Messages

Final Cut Studio install problems

Well I was thrilled to get Final Cut Studio 2, but cannot get the thing installed. Looking to do a 100% uninstall so I can start fresh
I have the following disks:
1. Final Cut Studio
2. DVD Studio
3. Livetype1
4. Livetype2
5. Motion
On my first install everything went as planned and it asked me for serial number. I made it thru the first disk with no problems, and the 2nd one installed for awhile, but suddenly stopped. A message popped up saying to put the Final Cut Studio disk back in. When I did that it failed. So I followed these steps:
Delete the User Preferences
You can resolve many issues by restoring Final Cut Pro back to its original settings. This will not impact your project files, but you should verify your Scratch Disk location setting after doing this. To reset your Final Cut Pro user preference settings to their original state, do the following:
In the Finder, go to ~/Library/Preferences—the tilde (~) represents your Home folder.
Remove the "com.apple.finalcutpro.plist" file from the Preferences folder.
Remove the "Final Cut Pro User Data" folder from the Preferences folder.
Remove receipts and reinstall Final Cut Pro
Another approach you might consider is reinstalling Final Cut Pro. To do this effectively, you need to remove the application and its receipts, then install Final Cut Pro and use Software Update to install additional updates. You don't have to remove everything that was installed with Final Cut Pro. Follow the steps below to completely reinstall a fresh copy of Final Cut Pro. Note: Make sure that you have your installation discs and serial number handy before starting this.
Open the Applications folder.
Drag the Final Cut Pro application to the Trash.
Go to /Library/Receipts.
In the Receipts folder, select the "FinalCutPro.pkg" file.
Choose View > as List to view the contents in a list.
Click the Date Modified column header so you can easily see all of the receipts that were installed at the same time as Final Cut Pro.
Drag the FinalCutPro.pkg receipt to the Trash, as well as any other items that have the same modification date within 3 minutes of the FinalCutPro.pkg's modification date.
Click the Name column header to sort the list alphabetically.
Drag any other receipts whose names begin with "Final Cut Pro" to the Trash.
Insert your Final Cut Pro installation disc and install Final Cut Pro.
When finished, use Software Update (under the Apple menu) to update your software to the latest version.
I started a fresh install, but noticed it never asked me again for my serial number. I was skeptical, but the installation went on and I made it all the way to the last disk, but when I put the Motion disk in the computer seemed to struggle to read the disk and eventually asked for the FCP disk to be put back in which resulted in another error.
I have tried several times since then to get this thing installed but keep failing. I worry about how it never asks me for a serial number. Are there some files that I am not deleting?
I have also tried to install one disk at a time and installing without Content.
Using a brand new Imac

Not sure if this is related but I've upgraded from FCS 1 to FCS 2 and all went well. I've now started to install all the various application media and Motion fails around 75% through the installation. I've tried to do a disk image of the disk but again that fails approx. 75% of the way through with the error "I/O error"
Tried the Soundtrack Pro media this morning and got through the first disk and again about 75% through disk 2 the installation failed.
Maybe Apple has bought a job lot of 'cheap' DVD's to save some money? I'll pop into an Apple store and see what they have to say!
HVXuser

Lost 1 final cut studio install disk

hi
i have my serial number and all install disk except dvd pro. just can't find it.
final cut studio 5 bought in 2006
mbp 17'
running snow leopard 10.6.8
what can i do?
thanks

Hi Shane
i was doing a fresh install of FCS because i had done a clean install of snow leopard on a 15" mbp
informed through reading in this discussion forum that it is always better to fresh install applications rather than migrate them
then i found i was missing the DVD SP disk - so i did the FCS install unchecking dsp and qmaster.
after the FCS install i don't see DVD SP in applications folder. [or am i missing something?]
YOu can install and use DVD SP in the basic way, just no themes. And you can have the installer not ask for the content by doing a custom install and unchecking it.
on a 17" mbp - i do have both - APPLE QM and DVD SP - - i am just about to do a clean snow leopard install on this one too. but first have just "plain" installed SL so that the 2 mbp have the same OS so i can miigrate files back and forth - or forth and back.
will a migrated DVD SP and a migrated QM work with the reinstall of the rest of FCS for which i do have the original disks [with a software update to bring them to the same version 5.1.4?]

Final Cut Studio installed on two computers?

Hi all --
Can Final Cut Studio be installed on two Macs? I have a laptop and desktop and would like to be able to use it on both machine (one at a time).
Thanks!

sometimes i have a project that will disable my desktops ability to run while it is processing.
is there any way that i can run FCP6 on my laptop at the same time and still be legal?
Also, I just purchased this laptop last week (macbook pro), i had a powerbook g4 1.5 processer. Is it ok that i just trashed the FCP files on my old laptop and uploaded FCP onto my new laptop or is there another way? sorry if this question is in another thred..
thanks

Final Cut Studio - Install on Two Macbook Pros?

I just purchased the academic version of Final Cut Studio. I have been reading the forums and have discovered that it is possible to install this on one desktop and one laptop, and both work as long as you are not working on them at the same time.
However, I have not been able to find if it is possible to install Final Cut Studio on two Macbook Pros. Does it have to be one desktop and one laptop or is it limited to two installations total? The license agreement says one desktop and one laptop, however how would it know if it were two laptops?
Thank you for your feedback.

Used by you doesn't mean used by someone else that doesn't own the computer
I'm an editor. Been one for several years. Any company I've worked for and edited with FCP has been on the company's computer and software, not owned by me. Are you saying that an editor for a company is expected to purchase their own computer and software in order to edit for a cooperation? Unlikely. A freelance or independent editor may have their own system that they edit on, but I am talking about an editor as an employee at a cooperation (where personal computers are restricted) or Macs and software that are available at an educational institution like an Apple Authorized Training Center.
I went to Apple Campus as a requirement of becoming ACT and "used" Final Cut pro on a computer that was not owned by me. Several others have done this and will continue to do so because it's a loophole that is apparently intended in the SLA for these reasons. Unless you're saying that Apple is breaking their own SLA agreement and advising others to do so in their training facility requirements which states:
The AATC is responsible for:
• Providing all hardware and software described in this document
The definition of the word "used" in this circumstance begs further clarification. Until that happens one can assume that the ordinary circumstance of its meaning for this situation is open to various interpretations.
OK so let's say I agree with your comment even if I don't. It still doesn't mean that if I owned a laptop and desktop that I can't use both at the same time according to the SLA. Only that they can't both be used at the same time over a network. So If I was encoding or rendering video on my desktop I could still use the laptop to edit at the same time.

Final Cut Studio Install troubles

Hi,
I am just trying to install my Final Cut Studio on my new MacBook Pro but the installation program is stuck with the last minute of the first FCP St. installation DVD on :
-Running Packages scripts...
-Install time remaining : about a minute
Any idea what should i do ?? should I delete all related files including in the Library etc.. and if I have to do this, how ?
Thanks
Message was edited by: Abyss Images

Ran into same problems. Tried many things. Finally removed Apperture because with FCS Remover, it says not to do a complete uninstall if you have other Pro software on your computer. (This is a new computer and I didn't have any pics in Apperture yet). After removing Apperture, I removed ALL of FCP with FCP remover. Then I installed ONLY Final Cut. Yeah! It installed. So I got brave and installed only Motion. It worked fine as well. Then I got greedy and tried to install Live Type. Got hung up again on the "running package scripts". Ugh. Out of time. I really wanted these three applications at least. I'm bummed that I can only get two of them.

Final Cut studio install problem.

Just installed Final cut Studio, problem is i got everthing, except FCP7. why? I tried to reinstall but its not working...
Help!

You can't install FCP 7 if FCPX is already on your system. Remove everything with this: http://www.digitalrebellion.com/fcsremover/
Install FCS3 first, run all updates then download FCP X again. AppStore knows that you already payed for it.

License Error on Final Cut Studio install

We just purchased Final Cut Studio 5.11 from the Mall of America Apple Store. After entering the serial number for Final Cut Studio, the Install screen moves on to the installation type, but gives me the following error,
"Licensing Error: The license file will not be written to disk because the user does not have enough privileges"
I have one account on this machine, which is the Administrator account, I am logged into it during installation, I even have a done a few things that made it ask me for my password, and this still comes up.
After encountering that error, i was still able to install the software, but none of the programs will run, each asking for name/company/serial, then telling me the liscense file is not found.
Help!
thank you!
Ross Hendrickson

I can't seem to find the license file, i've looked under library, and application support.
I have checked on my permissions, and I have read&write permissions to my home folder, applications, system, and both library folders.
In the Final Cut forum it said people were having problems with upgrading. I had an old version of FCP that I thought I had deleted, but maybe that is causing problems? Should I somehow uninstall all FCS/FCP info and start over?
thanks!
-Ross

Final Cut Studio install - Trouble with DVDSP 4 Preferences & Burn / menus

Hi there. I recently upgraded my dual G5 to Tiger and upgraded my FCP 4.5 & DVDSP 2 by installing a full version of Final Cut Studio.
Final Cut is working fine. DVDSP is not. It opens fine, however when I choose to open the Preferences to setup format (PAL) and encoding prefs, etc - I do not get a dialogue box. If I try the shortcut, I see the menu bar light, but again no dialogue box.
I tired to build a new project with compressor encoded mpeg2 & aiff streams and found that Burn / Build & Format are greyed out in the menu. I know that the file types are fine as I have used them before without any issues. I checked to see that the correct serial number is for FC Studio and it is. I have also ran all of the updates.
I also find that Compressor is often a little buggy. Sometimes works fine, other times crashes.
Anyone have any ideas?
I really do not want to reformat by reinstalling Tiger fresh. I am thinking about trying to delete all of Final Cut Studio and the older FCP & DVDSP apps on my machine.
I would really appriciate some advice beofre I get myself into any mess!
Thanks for reading!!

Hello. Many thanks to everyone that tried to help me.
My problem has now been solved by the same post in the DVDSP forum. Here is the post that solved all of my problems.
http://www.apple.com/support/downloads proapplicationsupport31macosx104.html
Even though the software update appeared as if I was completely up to date, the ProAppRuntime.dmg solved all of my issues. Thanks David S.!!!
==========================================
David S.
Posts: 2,565
From: Inland Northwest
Registered: Aug 26, 2004
Re: DVDSP 4 install from F Cut Studio / Preferences not opening / HELP
Posted: Mar 3, 2006 12:48 PM in response to: Spacegirlmelc
Reply Email
http://www.apple.com/support/downloads/proapplicationsupport31macosx104.html
G5 2.5G 4.0 RAM Mac OS X (10.4.3) Radeon ATI X800 Video Card 256 MBs RAM
=============================================
From: The Netherlands
Registered: Mar 3, 2006
Re: DVDSP 4 install from F Cut Studio / Preferences not opening / HELP
Posted: Mar 6, 2006 1:19 AM in response to: David S.
Reply Email
I would like to say BIG THANK YOU to David S.!!! I DL'ed & installed the update you mentioned. After a restart, DVDSP 4 is now working fine. The update resolved my preference & burning & building issues. I am very HAPPY to have a reprive from a fresh install.
Dual G5 Mac OS X (10.4.5)

Final Cut Studio Install and right click

I am considering buying a MacBook, in fact if I can sell my year old Toshiba Laptop for the price I want, I will purchase one.
I read on the FCS2 page that one can not install FCS2 on a computer with an Intel integrated graphics card. This stinks, but I understand why.
Currently, I only have another license for FCS1 with FCP 5.14, Compressor 2, DVDSP4, etc. Does FCS1 have the same graphics card limit as FCS2? If it does, is it possible to just install DVDSP and Compressor on my MacBook, or will it not allow me to even get that far to choose. I can understand that Motion and FCP would not run very well on an integrated graphics card.
Last question. I see there is a touch pad and a long rectangular mouse button. Is there anyway to make the mouse button right and left click, like you can with the mighty mouse or any actual 2 button mouse?
Thank you to those who can help!!

Final Cut Studio 1 has the same graphics card restrictions as the current version.
The MacBook has an option to enable two fingers (pressing two fingers on the trackpad) to enable a right-click automatically with the button. You don't need a two-button mouse.
-Doug

Final Cut Studio install failure

Hi everyone,
I recently bought the Final Cut Studio with Final Cut Pro 3 etc... and I keep getting an error message that the "content is damaged and that I need to contact my manufacturer" It also prompts me to insert the Install DVD but does not automatically eject the DVD Studio Pro Content dvd. I manually ejected the dvd and it gave me the error message. I even returned the Dvds and got a new set from the store I purchased them at. I still got the same message.
I don't know what else to do!!!! PLEASE HELP!
Thanks!

You need to call Apple - not an Apple store. They include 90 days of support for install issues.
-DH
Message was edited by: David Harbsmeier

Final Cut Studio Install Question

Hi All,
I just bought he Final Cut Studio 2 upgrade package (from FCS1) and want to install on my MacBookPro 17". I don't have enough space on the drive to install all the media (sound track loops, motion elements, etc...). I'd like to install the basic app on my internal drive with all the "templates, loops, etc..." on anexternal drive, but I can't seem to find a way to direct the install program to split tings up like that.
Do I have to install the program with out the loops first, then go bak and install the elements seperately? Or is there an easier way to do this?
Thanks,
Steve Martin
Omni Productions
Orlando, FL
macBook Pro 17" - 2 Gig Ram - 120 Gig HD

I used to live a couple of block from your business in Orlando. I'm disappointed that I never did business with you - would have save me gas!
Your Mac needs a diet. You can eliminate tons of files that you don't need within the apps your have installed. Did you know that most of your apps are like two apps (Universal) - one runs on PPC and other on Intel? You don't need them both.
You can reduce the Photoshop app by trashing over 100 MB.
Illustrator 303MB down to 182MB.
FCP 343MB down to 101MB!
http://www.xslimmer.com/
I've used this and had no problems. You'll love the FCP 6.

Final Cut Studio Install help

I am trying to upgrade to Final Cut Studio from the The Production Suite. Both are retail versions. The problem I am having is when the software goes to serialize the previous applications it can't find Motion. I am on a Dual 1 Ghz G4 that did not have a graphics card high enough to run it so I couldn't install it. It sees FCP 4.5 HD and DVD Studio Pro 3 just fine. I even tried to punch the serial code by hand but it still wouldn't take it. I only want to run FCP 5 and DVD SP 4 anyway. How can I get passed this?

At the beginning of the install you should see what it is trying to install in check boxes. You can uncheck the apps you wish not to install and than continue.

Possible to copy final cut studio install disks?

hi everyone,
i loaned my fcs 5.1.1 disks to a friend and they came back scratched. i have to reinstall the program and i'm having trouble.
wondering if it's possible to duplicate the install disks or are they protected some how?
thanks for your response---

The Show,
I like you. There is nothing wrong with telling people what the rules are as you constantly do, and I KNOW we both agree about the dongle. Here's where our opinions differ:
you wrote-
"C'mon Zeb if there's only one person who buys the program and they end up loaning it out to all his buddies then Apple is gonna end up having to sell the program for a million freakin' dollars! And you want to CONTRIBUTE to that?!?!"
my response: apple is not stupid. they know very well that piracy occurs with their software. Did you ever think that maybe they make it easy for people to copy software onto multiple machines on PURPOSE? Hear me out for a minute.
There's a software company out of Boston called Mark Of The Unicorn a.k.a. MOTU. They are big players in the audio world- major competitors of digidesign. A friend of mine used to work for them and he told me about an interesting discussion that the company was contemplating- what to do about piracy. Instead of taking the police state route (dongles everywhere and expensive software), they decided to sell their major audio recording program, digital performer for a VERY low price and do nothing about piracy.
Why you might ask... here's why. Once users have the software, they would get used to the workflow, then, realizing that they want to upgrade some of their gear, they would purchase MOTU hardware for lots of money AND pay lots of money for music libraries and plugins that REQUIRE A DONGLE!
It's actually a quite brilliant strategy. It got me hooked. I no longer use protools for audio. I'm strictly digital performer AND I have MOTU hardware!
Now think for a second, that maybe just MAYBE apple is using a similar technique- Have inexpensive software that is readily available to the masses, then get them hooked, PC users will want to use FCP, and will have to buy hardware- a mac...
Not only that, but apple makes only a small fraction of their money from people like us. the big bucks for them are the ipods, macminis and imacs.
I guess my conclusion with this 2 A.M. rant is apple is smart. If they really cared about piracy, they would force users to activate their software everytime they are on the system with a key (dongle) just like avid does.
My personal feelings on the issue are torn. On one hand, I paid good money for my software and it's frustrating to hear about people that get cracked versions, etc... but at the same time, think about all the people who can't spend x amount of dollars on a high end system like an avid... well, that's why this high(er) end system FCP is so great. If some high school kid out there has a pirated copy and he is LEARNING, trying to better his mind, not watch TV all day, but instead CREATE! I think that's just fine. I have learned so much from this forum and FCP has really taught me a lot about dealing with lots of different problems in LIFE! Life is all about troubleshooting. Maybe some poor kid out there is the next Shane Ross, or Patrick Sheffield or Captain Mench or Studio X or David H... the list goes on.
Maybe someday apple will clamp down and force us all to carry dongles, or maybe someday FCP will be free.
Until that day, I truly feel as though your calls for alert are merely falling on dead ears and scaring away new members to the forum.
Hold on one sec... there's a knock at my door- it's the FCP police. Gotta go!

Final cut studio install disks

I am trying to reinstall my FCS 7.1. to fix a problem with Compressor. I think I'm missing at least one disk. I have nine of them. I think there is an initial FCP Install disk, right? I have FCP Audio Content 1, 2, 3, Motion Content 1 and 2, Media 1 and 2, Apple Loops for Sounrdtrack Pro and DVD Studio. One is missing, right? The most important one?!
Is there any way I can get a replacement disk for this if I am registered? I sure don't want to have to buy this again for a stupid mistake!
Thanks
Shelley

You have all you serial numbers, etc.?
Download and use FCS Remover, to remove all traces of your previous installation, for Digital Rebellion (free).
http://www.digitalrebellion.com/fcsremover/
Then try the install again.
MtD

Very slow Final cut studio Install???

Man It seems I have been installing this FCS2 fro hours now , is this normal?

Installing from DVDs is slow, especially when there's so much stuff to install.
I make DMGs of my install discs and store them on our server, then when I install I mount the necessary disk image(s) and fire off the install. It is amazing how much faster it goes.

Final Cut Studio install

Similar Messages

Maybe you are looking for