Final settlemnt of project to main asset  by using t.codeCJ88

Dear Gurus,
When my user is trying to do the final settlement of Project to Main Asset by using t.code CJ88. it is giving error Net book value is in negative area 01.
Here the details is there is one project system that he wants settle to Main asset at that time the above error is occuring.
Any Guidance will be apperciate
little bit urgent
Regards
T N R

Hey Russ,
Thanks for your time. When I say a 'common issue' I found that when I searched it both on Google as well as this support forum I found multiple threads and questions pertaining to this issue of sync and/or drift.
I tested this single angle idea by using the footage in a nother project and exporting part of that (without changing angles) and it seemed to be OK. However I have other projects which are only single angle but they export slightly out of sync as well. I haven't found a common denominator yet.
When I say out of sync, it's not dramatic, however it's always the same - the audio is just a few frames behind the video. This has happened with most of my projects using different footage and different audio, etc. No matter what setting audio and video are recorded at, and regardless of whether I dramaticallty colourise or add effects to the video or not, it's always the same result; slightly behind audio when exported.
With regard to presets, do you meet export settings? If so, I'm mostly exporting using H.264 and as a Quicktime Move (AAC) output. I've tried various resolution changes and tinkering but nothing has changed.
If you're referring to project setup presets, I can't really change too many things because obviously the audio resolution and video frame rates are predetermined so I can't try 25p footage in a 30p project, etc.
Thanks again,
Chris

Similar Messages

  • Auc line item settlement to main assets

    Dear all ,
    We settled AUC assets Building  no.91000002 in main assets Building No. 40000005 from using T-Code aibu and aiab. , we select line item to settle in main assets. After settling we got document no. eg. 4000002 ,, but i want see all line item settled to main document no 400002 ,  i have check SE16 table ANEKPV not showing my settled line item ,, pls give any tcode which  line item selected to settled to eg.document no 400002. but we not using order no , wbs , project , i have check tocde KO88, AB03,CJID, kO02, AR01 Not find ,  how to know my selected line item, more details find the attachment ..pls help me
    Regads
    Ajay

    Dear Sir,
    Thank for reply  ,  i have checked e.g doc no - 1234561. then go environment and click original document, when i select it show two line item (list of assets document ) when i select main assets docs then go to overview assets docs , not go to CJ88 , so i am not able to resolve this issue , Pls help me ,,,
    if anybody know pls give me ans asap,,,,
    thanks
    Regards
    Ajay

  • My iMovie keeps crashing, its my final year Uni project and its in on Monday... please help!, My iMovie keeps crashing, its my final year Uni project and its in on Monday... please help!

    Please please help me ! iMovie keeps crashing everytime I try to work on a project, it has happened before, so I deleted everything and it seemed to work but now its back, this is my final year Uni project and its in on Monday ... any help would be soooo appreciated !!

    With regard to the HD Questions:
    1.- You can copy the entire 40GB hard drive main folder (if you cam is a HG-10, it will be named "AVCHD"), and that way you have the original video stored wherever you want. In the future, you can get that folder from a hard drive or mounted as a disk image, and iM08 will think it is a camcorder and let you import again.
    2.- AVCHD gets converted to Apple Intermediate Coded (AIC) because AVCHD is not meant for "editing", but for storage and transfer. Now on AIC you can edit frame-specific, without killing your CPU. It is "good" that it gets converted.
    3.- Once you have processeD with iM08, and exported into AppleTV, you could erase everything, including the event, project, and appleTV file from your computer, as long as the file is in the actual AppleTV set-top box, and you do not erase it from there while syncing, you should be able to see it. That way you will save storage/disk space, because you are right, the AIC file is very large.
    However: You must understand, that if you need to recreate this AppleTV final file, you will have to start over, getting it from the Copied hard drive, import into iM08, create the project, and export to AppleTV, AGAIN, so you pick which one you erase, based on how much you need this file.
    As per you SD question, I do not use DV format, so I AIN'T GOT NO IDEA.
    Message was edited by: gusluz

  • How to save Final Cut Pro project to an ftp server to then open on a different computer

    Hello, I work for a graphic design firm that also does video production for businesses. We are using Final Cut Pro X in our office which has an FTP server connected to all office computers.
    What we want is to be able to have on employee start a project in Final Cut Pro X, save it to the server; then have another employee open up the same project and continue working from a different computer.
    Right now, we have a lot of our Final Cut files saved to the server, and the files will show up in the server on the other employee's machine. BUT, we scroll in the server to the file for the Final Cut Pro project on the other computer, and the file is grayed out, unable to be opened on the new computer.
    I've tried right clicking and choosing "open with Final Cut" and Final Cut does then open, but right before it opens the project within Final Cut, a message comes up saying "The document could not be opened. Open documents from within Final Cut Pro," which of course, I see no way to do that from within Final Cut Pro.
    I've also called Apple Care, they reminded me that we can't have one project open on two computers at the same time, and that's fine. We are willing to close the project on computer one to then open on computer two.
    If you have an answer let me know. We don't want to have to load onto an external hard drive to then load onto the other machine, especially since we have a server ready to go.
    Thanks for your help.

    You can share projects via the ftp server, but you need to:
    1) Have all the media in identical events on each editor's machine;
    2) Set up the project  and share the entire folder for that project first;
    3) Afterwards, you can share just the project file itself
    You CANNOT work directly on projects and events stored in the ftp server.
    See Steve Martin explain how to do all this: http://www.youtube.com/watch?v=Hu-ga7fxKh8

  • Error occuring while posting purchase of main asset in asset accounting

    Dear Experts,
    while am posting main asset using f-90 transaction code, it shows that," you cannnot post with transaction type 100 here".
    How can i resolve the problem, kindly help me.
    Regards,
    RajuPotharaju

    Dear
    SPRO- Financial Accounting New- Asset Accounting---- Valuation---- Depreciation Area-- Define depreciation area.
    Select Define Depreciation area.-  For area 1 in GL column it must 1 that is area post in real time.
    Select that area click on details button.  Posting to GL must be 1 Area post in real time.
    Regards
    shankar

  • Creation of main asset master

    hi all,
    its not allowing me to create MAIN  ASSET MASTER(TCODE: AS01)
    asset class: AML2000
    Ccode: AML
    capitalized date: 18.08.2010
    select timedependent tab
    buisiness area: AMLH
    AFTR THIS
    Iam unable to select the tab "depreciation area"
    HERE iam getting Error "fill in all required entry field"
    so can u plzz help me to come out this.
    Thanks in advance,
    VENKAT
    Moderator:Dear Venkat, your SDN user name could be new, but the rules are the same. Please, respect them before posting a thread

    Hi,
    Also check Define Screen Layout for Asset Master Data & Define Screen Layout for Asset Depreciation Areas in Master Data in Asset Accounting.
    Trust this will resolve your issue.
    BR,
    Mehul

  • Auc to Main Asset Line Item wise details

    Hi Expert,
    i have find and read number of thread regarding details of converted from AUC asset into Main Asset. in sap there is no any standard report where i got the details like AUC asset converted into Main Asset.
    scenario is , we have create Capital  PO  say 5 lacks account assignment category A. under purchase we have given Internal order and Auc Asset No.2005001.
    after received the goods. entry has been made.
    now we have book some expenses against AUC PO say Rs.25000+10000+3000 =38000/- Total extra so now while settle the AUC asset to main asset amount would be 5,00,000+38000= 5,38,000/-.
    in above process we do settle thru KO88 . AIAB and AIBU.
    kindly help where which table we can see the line item details i.e Rs.38000 coz  not any standard report to achieve the above process.
    also give me the idea of Zreport. to achieve.
    Thanks in advance.
    Kind regards
    Pranav Kr. Gupta

    Mukthar sir,
    we have already transferred from auc asset to Main assset. now we want to know  line item wise how much cost occurred while AUC Asset time . say Rs.5,50,000/- same amount will come in Main asset number.
    only accounting entry showing below
    70 : GL No. 211200 Furniture main asset A/c  No.i.e      2005009        5,50,000
    75  GL No. 217300  WIP Others AUC Asset A/c i.e No. 3210000        5,50,000
    Note : we want details of 5,50,000/- how many line items generated .
    if i give on selection screen Main asset Number system will suppose to show the details of Rs. 5,50,000/- line item wise along with AUC Asset Number.
    Kindly help . or if any standard report to get this information , like if i give main asset Number then system automatically show the details of AUC to Main Asset.
    Thanks
    Pranav Kr. Gupta

  • Can't Update Old Final Cut Pro Projects

    I use Final Cut Pro for work and just recently updated. I didn't realize that I needed to have all my projects in my "Final Cut Pro Projects" file while updating. I had a lot of my projects in a "Final Cut Pro Projects-Not In Use" file when I updated my Final Cut Pro and now those projects will not update. I didn't have a "Final Cut Pro Projects" file after updating so I created a new one under "Movies" in my Finder and added all the projects to that and Final Cut Pro still won't update them. What am I doing wrong?
    Also, now that I've updated the projects are exporting as .MP4s and my boss wants them as .MOVs again. Is there a way I can change them to that?

    I have been trying to add a screen shot to this reply for the past ten minutes but I keep getting "An error occurred while trying to submit your post. Please try again" So I will try to explain it to you.
    I click the arow on the bottom right hand corner. Then click "Master File..."
    My settings are:
    Format: Computer
    Video codec: H.264 Better Quality
    Resolution: 1920 x 1080
    Audio file format: QuickTime Movie (AAC)
    (don't click Include chapter markers)
    Open with: QuicTime Player (default)
    On the bottom it reads left to right:
    1920 x 1080 | 23.98 fbs   Stereo (L R) | 48 kHz  00:00:04:02   MPEG-4 movie 10.4 MB est.
    Then I click "Next..." and save it to my Desktop and click "Save"
    I hope that makes sence! Sorry the screen shots didn't work!

  • I need to burn a Final Cut pro project onto a DVD. I watched a tutorial but they were using Final cut Pro 10. How do I burn one just using Final Cut Pro? and can I go through IDVD?

    I need to burn a Final Cut Pro project onto a DVD. I watched a tutorial but they were using Final cut Pro 10. How do I burn a project just using Final Cut Pro? and can I go through IDVD? ( oh and how can I finalize the project?) Thanks!

    I did that already it it only burned one section of the project. How do I export a master file? Can i just save it on the computer then take it to IDVD? Thank you so much for helping me!

  • Can I open my final cut express projects in final cut pro X?

    I need to get footage out of some of my final cut express projects and put them in final cut pro X, which I am now using. How do I do that?

    You can export any movie from FCE to Quicktime, and use it in FCP X. If you export using ProRes 422 codec it will already optimized for FCP X.
    What you can't do is use the FCE projects themselves in FCP X.

  • Memo Value for Main Asset and Sub Asset

    Dear Experts,
    I am having the requirement that, all the main asset should have the memo value Rs 1.
    For this I have specified the memo value in OAYI. But system is taking the memo value for Main asset as well as Sub asset.
    But we don't want to keep the memo value for sub asset.
    I hope, I am missing some settings. Could anyone please help me to solve this.
    Regards,
    Aswin

    Hi:
           You need to review your copy settings for sub assets for your relevant class's screen layout in  SPRO...Financial Accounting,,,,Asset Accounting....Master data....Define Screen Layout for Asset Master Data....Select the screen layout which has been assigned to your asset class in OAOA. You will not find any field for value copied. So it is not possible to avoid this happening becuase it is done a t CO code level.
    Regards

  • PO number from AUC to Main Asset

    Hi,
    Is it possible to show the PO number of AUC Asset in Main Asset to which the AUC Asset was settled.
    Appreciate your help.
    Thanks,
    KK

    Hi,
    There is a possiblility. Check the <b>screen layout</b> of the asset master. 
    Asset Accounting> Master Data> Screen Layout> Define Screen Layout for Asset Master Data
    Main tain these rules:
    Purchase order date in the Posting information Group(2)
    Asset under constr. and Origin long text  in the Orgin(9)
    Thanks
    Vijay

  • Main Asset master problem

    Hi Every body,
    when i am posting the F-90 Asset purchased , This error will be coming
    <b>No depreciation areas have been defined for asset 1-0</b>
    when i am creating the main asset master After click the Depreciation area it's not available any information. How to maintain the Depreciation area details in main asset master.
    Regards
    gvr

    Hi,
    When creating a new Asset Master using transaction code AS01, in the tab Depreciation areas enter the Depreciation Area, Depreciation key and useful life. This is a mandatory field, unless this is entered you cannot save it.
    Before this all your configuration settings for the Depreciation Area should be complete.
    Thanks
    Murali.

  • I can't finalizing my movie project: error 49, what is this?

    i can't finalizing my movie project: error 49, what is this?

    Hi
    Error -49 opWrErr  File already open with write permission
    Trash the preference files while application is NOT Running.
    from Karsten Schlüter
    Some users notice on exporting larger projects from within iMovie that this operation is aborted with an 'error -49'
    This issue occours only on MacOs machines using 10.7x
    try switching-off the Local Mobile Backup
    in Terminal copy/paste
    sudo tmutil disablelocal
    Re-launch Mac
    Yours Bengt W

  • Commitment item can not derived from main asset number

    Dear all,
    Our client have 1 G/L LVA and divided to many asset class LVA. Asset lva will post to general expense when run depreciation, and they want the acquisition/procurement of LVA should check the budget of the general expense.
    It means the acquisition of LVA will check the budget of general expense, then no budget when run depreciation.
    I already setting for no check budget for run depreciation. However, i found trouble when set the derivation from main asset number to commitment item. I want to set from main asset number because only 1 G/L LVA.
    Derivation rule from main asset number not populated to commitment item which i'm expecting, example
    FMDERIVE (1)   CI from main asset number (for acquisition)
                       asset number         CI
                      23000000000        7400000102
    FMDERIVE  (2)  CI from g/l account
                       G/L acct.                CI
                     2290000001          2290000001
    Because asset number 23000000000 assign to g/l 2290000001, then the tracing always read the g/l account, then derive to commititem 2290000001 NOT to 7400000102.
    I already give many condition however it can not work. Even i deactivate fmderive (2), asset number can not populate to relevant commitment item.
    Please give me advice how derive the commitment item from main asset number or relevan things.
    Regards,
    Dewi

    Hi Dewi
    Please have a look at these notes which I think are interesting:
    [736914|https://service.sap.com/sap/support/notes/736914]     Budget relevance of asset transactions
    [1268001|https://service.sap.com/sap/support/notes/1268001] FI313 - No funds center entered/derived
    So, if you need to derive the FMAA from the Asset master data, you could enable a derivation step calling function module FMDT_READ_MD_ASSET. Take care of following derivation steps which may be overwriting the derived values from FMDT_READ_MD_ASSET. See the trace log, according to note [666322|https://service.sap.com/sap/support/notes/666322]
    Cheers
    Mar

Maybe you are looking for