Financial Report Template for Trial Balance

Dear All,
      I was prepared the financial report Template, for trail Balance as per Schedule VI (6) after completation of template i exucute the trail balance by the using of above template.
For the execution of the above report i used the selection cretario i taken as "Annual Report" and i run the report - it has execuatated successfully.
After that i changed my selection cretaria as a "Quartlly" and i run the Report,
but in that report is showing some values , these values not showing in Annual Report.
    Please Guide to me.
Message was edited by:
        Marc Riar

Hi Atul,
SBO uses two different templates for the Trial Balance Report based on the Period Selection.
Annual Report
Template: CBL1 - Trial Balance
Quaterly, Monthly, etc.
Template: CBL4 - Periodic Trail Balance
So you have probably customised CBL1 (per Schedule VI (6)) which works for Annual.
You have to also customise CBL4 - Periodic Trail Balance the same way so that it can work for the others.
Regards
Suda

Similar Messages

Help on report writer for Trial balance report

Hi
client is using report writer report for TB report say report ZTB.Now problem is when new financial year started on 1/4/2007 it is not carrying opening balances from previous financial year.
Existing report writer report is linked to Macros developed for complete financial reporting.So existing format can't be changed i.e addition of new columns etc.
Is there any place staright away I can make a change so that previous year balances can be added as of 1/4/2007?
I am new to report writer.
Can some one please help me how resolve this!!
If any one has documentation with step by step report writer please send me to [email protected]
regards

Hi
look here
http://help.sap.com/saphelp_erp2005/helpdata/en/5b/d22db643c611d182b30000e829fbfe/frameset.htm
assign points as a way of thanking
Regards,
Zaid

Financial Report Template

Hi Experts,
I need to develop a report template for Financial Reports, I need to sort my accounts in a different way other than using the Chart of Accounts Template,I already tried creating a new template but I had some hick-ups, can any one please point me to any documentation/guide for developing report templates.
Waiting to Hear from You.
Kind Regards
Edited by: Chike Nwogu on Dec 2, 2008 1:04 PM

Hi
To compile financial reports, the system needs a template that specifies the structure of the report. You must define these financial report templates in advance.
For some countries SAP Business One delivers templates that you can use to create your own financial report templates. An alternative is to copy the structure of your chart of accounts and then make any necessary changes to it. You can use the financial report templates to compile balance sheets, profit and loss statements, and trial balance reports (totals and balances of G/L accounts and business partner accounts).
Balance Sheet u2013 The system proposes the accounts in the Assets group as assets (active) accounts; the system proposes the accounts in the Liabilities group and the Capital and Reserves group as liability (passive) accounts. You can change these proposals on the highest levels of your financial report template. The system automatically displays the profit or loss for the period (Profit Period).
Profit and Loss Statement u2013 The system proposes the accounts in all the other groups (Turnover, Cost of Sales, Operating Costs, Non-Operating Income and Expenditure, Taxation and Extraordinary Items) and offers the calculation of subtotals.
Trial Balance u2013 The financial report template can contain the accounts from all groups. It displays the totals of all groups but does not offer any subtotal calculation.
You can create comparison reports that compare the figures from a specific company or fiscal year with those of a different company or fiscal year.
Choose Financials  Financial Reports  Financial and then Balance Sheet or Trial Balance or Profit and Loss Statement to generate these financial reports.
Choose Financials  Financial Report Templates to define and maintain financial report templates.
Editing a financial report template is similar, but not identical to, editing a chart of accounts.
Every financial report template has exactly five levels.
Levels one to four consist of only titles.
The G/L accounts are all located on the fifth level.
If you want the totals of the G/L accounts to be displayed on a higher level, you can make the higher titles invisible by selecting the Dummy Title indicator.
You can hide G/L accounts if you donu2019t want them to be displayed.
In a financial report template for balance sheets, you can let the system automatically transfer accounts to the other side of the balance sheet in case the account balance is negative. To do this, select the Transfer Accounts with Negative Sign indicator and specify the place where the transferred account should be.
In a financial report template for profit and loss statements, the system can insert a subtotal on every level:
Level 1 (level of account groups): Select Automatic Summary to let the system use predefined formulas for the gross profit, operating profit, profit after financing expenses, and profit period.
All levels: You can define your own formulas. Select Totals Formula and choose Formula to enter a formula based on the titles of the same level as the subtotal.
Regards
Rashid

Financial report Templates - PLD

Dear SAP Experts
I have given the formula in Financial report template for calculating Gross profit and it is showing in the reports, but when i taking the pld reports for Pand L, the value of gross profit is not showing.
How do i bring that Gross profit value in the PLD?
Thanks
Regards

Hi,
At which level u have assign new "Gross Profit" variable...please check the level onces u get complete report of P&L
AT what level u have create Child in COA and Generate level should be same to view yr amount in PLD...
Level can be change just by click and select as per yr need...
Thanks
Kevin

The client is looking for trial balance and GL balance reports in Spanish

hi sap techis
I am facing a typical issue.the client is looking for trial balance report and GL balance report in Spanish language.the problem is if i change the language key from English to Spanish the entire language will be changed to Spanish is there any way by which without changing the language key in chart of accounts, we can obtain the reports in Spanish language.please help in taking out reports in Spanish from F.01 in Spanish
Edited by: akausar on Apr 16, 2010 12:42 AM

You have to translate all your financial statement version nodes from English to Spanish to be able to see Spanish texts in F.01. To translate, execute T Code SE63 and choose Translation -> ABAP Objects -> Other Long Texts from the menu. Then expand 'FI FI Balance Sheet/P&L Statement' and double-click on 'FIBS FI Balance Sheet/P&L Statement '. Then change the source language to EN and target language to ES (they are greyed out but you will still be able to pick them from the drop-down menu). Now put the cursor on Object Name field and press F4. You will see the financial statements you have created in OB58. It is a cumbersome task, but you have to drilldown to each node of your FSV and double-click on it and in the following screen you will see the English text on top. In the bottom part of the screen you have to enter the Spanish text.
Once you are done with translation, execute program RS_LXE_RECORD_TORDER and then push your translations into a transport request.

Financial Report Templates - Creation and input of accounts

Hi,
At the time of creating Financial Report Templates, these templates can be very time consuming and tedious to create, as for the inputting of accounts within each account category - filling out one or more details...
It would be helpful to have some kind of tool in which we could associate like in the GL all the sub accounts withing that account.
I hope I have been clear enough,
Regards
Vivek Chand

Hi:
I'm agree with your post, all my customer are very angry with this functionality because the want use wildcards for input the account, if i input 71* the template will show all account which begin with 71.
Now when they create a new account into the financial plan of accounts they must create also into the report templates and this work is hard and spend a lost time in it.
Best Regards
Joaquin Gomez

Financial Report Template- Calculation error

Hi All
I have developed a template for Profit and Loss Statement by using
Financial report Template
Under operating expenses heading i am having following heads
F&B consumption
Non-F&B Consumption
Gas Fuel ...
Operating Expenses value i am getting is wrong due to the following reason
F&B consumption calculates ( F&B consumption= F&B Opening Stock+ F&B
Purchase- F&B Closing Stock)
I need to add a formula to find F&B Consumption that is coming under F&B
Consumption head
Non-F&B consumption calculates (Non- F&B consumption= Non-F&B Opening
Stock+ Non-F&B Purchase- Non-F&B Closing Stock)
I need to add a formula to find Non-F&B Consumption that is coming under
Non-F&B Consumption head
For calculation from the system
In the present calculation the Operating expenses is derived by adding
the closing stock value as just an other expense head instead of
subtracting the same and also by ignoring the subtotal which actually
refers to the calculation (Consumption=Opening stock+Purchase-Closing Stock)
Calculation Expecting
We need the Operating expenses to either consider the subtotals to add
for the expenditure or the closing stock value needs to be reduced from
the Expenses.
Please help to solve the issue
Regards
Rashid

This error usually means the workspace agent is not up and running or can't be connected, are you sure that workspace is definitely up and running and you can log into workspace.
Cheers
John
http://john-goodwin.blogspot.com/

#REGION_STATIC_ID# does not work in report template for PPR

I was hoping to use the new substitution string #REGION_STATIC_ID# for a PPR report, because when we do Export/Import of the app the Region ID changes and we have to manually change the Pager Header Javascript to get the PPR to work. A real pain.
So I changed the Region template to use #REGION_STATIC_ID# and set the Static id in the region definition - this worked fine. Next, I modified the Report template for PPR to use #REGION_STATIC_ID#, but at runtime this resolves to a blank! I assumed it would pick up the static ID for the region it was in. Is this a bug or am I just not understanding the way it is supposed to work?
Regards,
Steve

Hello,
#REGION_STATIC_ID# is available in some places in the report template. But the PPR javascript uses the APEX engine created ID get into the fast track report engine so it's not going to work that way.
But you can still do what you want to do what you want to do. Use the #REGION_STATIC_ID# in your region say something like this #REGION_STATIC_ID#_body the use the javascript to get that element and then use that element
along with getElementsByClass(searchClass,node,tag)
http://apex.oracle.com/pls/otn/f?p=38704:2:::NO::P2_ID1:22
to grab the report table and then it's ID which you can then feed into your javascript. It will only be 2-3 more lines of javascript.
Carl

Opening balance for Trial balance report

Hello Experts,
I have requirment to develop a Trial Balance report with the colum like Opening Balance, Transaction Debit,Transactoin Credit and closing balance.
I am trying to get opening balance from the Table FAGLFLEXT.
how can I get the opening balance. In FAGLFLEXT in the fild HSLVT ( Carry forward Bal. in local currency) has more than one line item for one fiscal yer, one G/L and one profit center. Should I club all the values of HSLVT value.
Thanks

Hi Srikant, Yogesh...
Thank you for your reply. But I have some other requirment for that I have to go for devlopment for this report.
Regards,

BI Publisher Report Template Error - Trial Version

I am running the trial version of BI Publisher and getting an error when attempting to create report layout using the Report Editor for version 11g Release 1(11.1.1). The choice of templates does not stay up for selection. The error in the log is "Incomplete xlst._XDONFSEPARATORS: decimal separator: null, grouping separator: null". Any idea how to correct?

Thanks for the suggestion Simon.
I just created a view based on the 46-column SELECT statement from dual above and then set "SELECT * FROM myview" as the Source Query.
Unfortunately I get exactly the same error.
Thanks,
Andy

Financial Reporting in BI. Balance Sheet, Profit & Loss

Hello Gurus,
Background
I have a problem in finacial reports esp. Balance Sheet and Profit & Loss reports. When SAP ERP implemented, they have designed the FSV according to the country accounting and business requirements for external reporting. But the regional financial office in the UK requires a different way of reporting esp. the break up of costs in P&L.
As a solution they, non BI and Management have suggsted to design these reports Balance Sheet and P&L in BI and change the design as per the requirement for UK office. i.e For P&L combine FI and CCA queries.
Problem
My problem is, the queries are designed as GL Account Heirarchies and that are static. So for any GL I need to open the Query (FI) and add the GL into the specific group and any new Cost Center I need to open CCA Query and update Cost Center and Cost Elements manually. After adding the GL I need to reconcile both reports...etc It takes half day or full day sometimes to reconcile the reports.
P&L Report is designed as a workbook having three sheets. This workbook has two queris , FI and CCA. Both of them static heirarchy (user defined). So GL Grouping is maintained manually. The third sheet, has the layout and formula to fetch the values from the other two sheets.
Also Balance sheet workbook is having two sheets. The query is having 0GL_Account heirarchy. So when a new GL is added, I need to change the formulas on the other sheet which displays the Balance Sheet in the required format.
My questions
What is the best practice for month end / year end financial reports?
How you have designed the P&L and Balance sheet in BI?
Do you maintain GLs manually?
How can I re-design this reports so that I need not spend a signle minute of them on every month end / year end.
Regards
MultiABAP

To be honnest, I didn't fully understand your case, but I got the general logic.
I would say that you first need to harmonize your data and apply to them the group business rules before doing your reporting. This can be done by different ways. The best one according to me is to define a consolidation chart of accounts (based on the group policy) and mapp these accounts to the operational accounts automatically using BI transformations. Then you'll be able to define your reportings based on this harmonized referential.

Datasource for trial balance

Hi,
I am on BW 7.4 and wated to know if I should use datasource 0FI_GL_10 or 0FI_GL_14 or 0FI_GL_4 to build a report on trial balance.
Please let me know.
Thanks,
Sam

Hi Sam ,
0FI_GL_10 use this data soruce and instal business content .
We have standard report for GL Trail report on virtual infocube .
Regards
Umashankar

Crystal Report Templates for User-Defined Objects

Hello Experts,
I am running SAP B1 8.8 PL11. In the current patch SAP has default Crystal Reports that can be used as Layouts for Invoices, Credit Memo's so on. Is it possbile to have layouts for user defined objects ( say for instance i have a customized form under sales module, can i import a crystal template for this customized form?). In the report layout manager i don't see an option to import user-defind objects.
Any help would be appreciated.
Thanks,
Praneeth

If this is still a problem please re-post to the SAP Integration Kit forum.

DTW template for Inventory balance

Dear All,
what is the template for migration of batch wise inventory balances. also let me know what are the mandatory fields.
prince

Hi Prince,
DTW has changed its file structure to be in lines with the SAP Business One module menu so its much easier to locate the files.
So the new path for the sample Goods Receipt is:
C:\Program Files\SAP\Data Transfer Workbench\Templates\Data preparation examples\10. Testcase1_Test Data for Import function\Inventory\Inventory Transactions\Goods Receipt
The default template can be found at:
C:\Program Files\SAP\Data Transfer Workbench\Templates\Templates\Inventory\Inventory Transactions\Goods Receipt
Cheers,
Lisa

Edit report template for Disposal Documents (CG42) - Waste Transporter

Hi all,
I am trying to create a new template (CG42) for disposal documents.
I can not to introduce the information about the transporter (waste transporter name, auth-assgnd no. and the transport matriculation)
can you help me? how can i do it?
thank you very much. María.

Hi Keshav,
Yes, this problem is resolved except because i don´t know where i have to introduce the License Plate in the waste transporter (WAA19) in order to it appears in the WWI document.
I have anothe question to it in the Forum "Report Template with WWI: Waste Transporter: License Plate".
Can you help me?
thank you very much again. Marí

Financial Report Template for Trial Balance

Similar Messages

Maybe you are looking for