Find A material in abc analysis

hi all
1.how to find the A materials for the ROH , WIP material , FERT
for the top 10 material in the REM process
2.wip material means HALB material or it may ROH , HALB OR FERT ALSO
pls provide ur suggestions

Hi Raj,
Theoretically WIP could be of any FERT or HALB material, WIP means you have done GI , you have done activity confirmation but stikll production process is not complete , what we intended to fabricate is in progress state and yet to be completed. WIP should exist for something which is manufactured since ROH are purchased so WIP for ROH should not exists, though it depends on how FERT, HALB or ROH have been defined in your system. if materials with material type ROH are also produced then WIP may exist for ROH also.
Please let me know if I could explain your question.
Thank you
Anand

Similar Messages

  • ABC Analysis for Customers

    Hi All,
    Please let me know the concept of ABC analysis for customer clasification in SAP.
    What are all the configuation setting needed for the same?
    What is the master data to be maintained?
    How to run the ABC analysis for customers? with relevant report(s)?
    Relevance of the field "ABC Class" (KNVV-KLABC)  in Customer Master(how can it be used for ABC analysis for customers).
    Thanks & Regards,
    Roushni

    Dear Roushni,
    As per my concern there is ABC analysis for material but I don't  about Customer ABC analysis.
    Plaese got through this SAP help link to know about Material related ABC analysis.
    http://help.sap.com/saphelp_47x200/helpdata/en/c1/37613d449a11d188fe0000e8322f96/frameset.htm
    I hope it will help you,
    Regards,
    Murali.

  • ABC Analysis report

    Hii all,
          i am using MC40 and MIBC for  ABC Analysis report.
    few materials, we are using very frequently, even in report its showing ZERO as a total value n total stock value.
    please suggest me, why this report is coming wrong for few materials.
    Thanks
    nisha

    I think you are mixing a couple things here and loosing the focus for your initial problem,
    OMJJ settings of movement types are general settings. I really wonder why you have different values there in standard movements 101 and 201 than  the the predefined values given by SAP. I never had to change that in the systems I have worked with.
    a 101 is by design a planned movement (unplanned receipts are made with 501) hence the consumption control has a G  to control the consumption update (which a tab in additional data of material master). G means always update planned consumption.
    But this is only done if the movement is made agains an order with account assignment, otherwise it will post to stock (which is not a consumption)
    The second consumption indicator in OMJJ  folder "update control" defines to which consumption account the posting is made. the 101 movement takes the decision from the account assignment category, hence you find an indicator for each accounting type there.
    a 201 movement is by design a consumption movement. the general consumption is set to R, which decides that it posts to planned consumption in case you reference a reservation, or to unplanned consumption in all other cases.
    you always consume from stock  and you enter manually account and cost center, so there is no need to for a consumption by account assignment. (which you dont have in case of 201, as you dont do a 201 in reference to a purchase order)
    you did nowhere explain the movements that you had for the materials that did not show up in the ABC analysis.
    you did not explain what selection you made, by default it looks just at the last 90 days. Are  you certain that you had consumption postings in MB51 in that period?

  • ABC-analysis in Open Items report

    Good day, dear experts!
    I got a task from my chief to find out how to use menu path "Go to - ABC analysis" in Open Items report FBL1N/FBL5N.
    Everything I've found is a message "ABC analysis not possible here", Message no. 0K076, and old-old note for this message 414907.
    Do someone use ABC-analysis for open items?
    I think it's useless, but maybe I don't understand something...
    Irina

    Hi,
    Nope, it is useful.
    Execute FBL1N and select line items (Edit > Select All).
    Then click on any amount column.
    Then click on Goto > ABC Analysis
    You will get the options to classify the line items in the A, B, C categories based on the % creteria etc. on that screen.
    Regards,
    Gaurav

  • What does the field Inconsistent mean for ABC Analysis for Cycle Counting report

    What does column "Inconsistent" mean for report ABC Analysis for Cycle Counting (T-code MIBC)?  The reason I'm asking is because I see TotalStock values greater than 0, but the Accounting 1 view for Material Master and MMBE both show zero stock.  I do not understand why TotalStock in the report does not show zero.  Can anyone explain how this can happen?
    Note: the report is run for consumption/usage date range.
    Thank you,
    Doug

    Hi,
       MBEW table and MMBE transaction will show the current stock. When you run MIBC report for consumption, the system considers the consumption for the date range given (from MVER table), which may not be equal to the current stock. Refer the KBA:  1817237 - Stock quantities and stock values in MIBC  which explains the system design.
    Regards,
    AKPT

  • ABC analysis and MC40

    hi-
    Environment : ECC6.0
    We use the standard MIBC-ABC analysis which changes the ABCD indicators based on the turnover or u can say consumption.
    Scenario:
    We have low cost value components (say Bolts) but have a high usage/consumption. So based on ABC indicators, they come up for counting very ofter. We dont want  to count them every month due to their low value but would like to make them available in standard SAP ABC analysis.
    And NO, we dont want to fix the CC indicators for these bolts.
    My question as per following?
    (1) How can i achieve a situation that when the ABC analysis runs and provides a report that Bolts are A ( high consumption indicator-monthly), i am able to change the CC indicators subsequently for the Bolts to D ( once a year) so that i dont do the inventory count for them. ( I dont want to use MM17)
    (2) Can i run MIBC analysis and then execute MC 40 for bolts (if this T-code will assist me since i dont know much about this T-code)?
    (3) Can i just run MC40 or is there another T-code which will assist me?
    (4) Is there a process in Standard SAP which will be enble me to achieve my requriement.
    Looking for any information you all can share.
    Thanks

    Thanks for the response.
    MICN is the only one that can update the indicator used for cycle counting.
    Once MICN updates the Cycle count indicators, can i then go into MC40 or similar T-code, select the range of materials or material types for the BOLTS in the input screen and make a change on the CC indicators manually to D ( annual count)?
    However, pretty often the cycle count indicators are precalculated by MICN based on consumption, but then individual items are changed to get a different indicator for specific reasons.
    You may have a low value item, which is very important for your processes.
    Based on consumption values it may get indicator C, but if you have differences on that item then it is a critical factor for your business, hence you want count it more often, thus you would manually change it to B or even A. (which can be done directly from the MICN report)
    My requirement is : I have low value materials in high qty which show in Monthly inventory count due to high consumption. This is my target group to change the CC indicatos to C or D.
    When you indicate i can manually change in MICN report, does it mean that i need to run MICN report twice, first to get the actual ABC analysis and then second time, select the materials (BOLT), generate a report and change the CC indicators.
    I do see an option to input materials in the input screen of MICN but i dont see the option to input or provide the required CC indicators as a manual input.
    If you could provide more information on the sequence of steps, it is appreciated.
    Appreciate your support.

  • ABC analysis

    Hi,
    for the client we have customized the ABC analysis report which shoes the material details and its status for the last 5 years,with last purchase and sales date.
    Some materials are not been caught in this report. What may be the reason for this?.
    Regards

    the ABC indicator in material master should be the result of the analysis, but not a precondition.
    MC40 is a usage based analysis.
    do you have consumpion movements in MB51 for that material?
    Is it a material like any others that show up in your report? or is it something special like non-valuated, or consignment or PIPElline, or always procured to a project...?
    What tables are  the basis for your report?

  • ABC Analysis of Planned Consumption(Issue against Reservation).

    Hi Experts,
    Is there any standard report is available for ABC Analysis of Planned Consumption(material issued against Reservation)?
    thx in advance...

    Hi,
    I allready tested with Tcodes such as MC.9 (gives details of total & unplanned consump. not for Planned consump.) & MB51(gives details for only one Mov. Type say either 261 or 262 not possible to do ABC ana. for balance of both)
    Is there any other std report as ABC analysis of planned consp.
    Thx in advance...

  • ABC Analysis of the materials (MC40)

    Hi,
    What is the meaning of analysis strategy in the report MC40 (Usage based ABC analysis).
    Regards,

    Hi Rajan,
    The report checks for the past usage of the material & based on this will compute the ABC curve. This analysis is normally done when you do not forsee much changes in the consumption pattern, then this report is helpful, as the classification will have a long term meaning.
    But if the conumption pattern is changing or going to change in the future, then it is better to run MC41, where-in the future needs are considered & this will give you a better classification of components.
    Eg: Mtl A which had no consumption or very little in the past might end up as C when you run MC40, but the reality is, this part will be in great need in the future & so MC41 makes better approach.
    Hope the above was helpful.
    Regards,
    Vivek

  • Answers: Multiple sorts for different rsum (multiple ABC-Analysis in one)

    Hello
    I want to do an ABC-Analysis i.e. on my ProducLines. I am doing it by using something like:
    CASE WHEN
    RSUM(Sales / SUM(Sales by) * 100) < 75 then 'A'
    WHEN ... THEN 'B'
    ELSE 'C'
    END
    This works fine so far but I need to take the column "Sales" into my request and order the request on that. (to get the "big ones" at the beginning)
    Details on this can be found here: http://blog.trivadis.com/blogs/andreasnobbmann/archive/2009/09/18/abc-analysis-in-obiee.aspx
    My Problem now:
    I would like to do this ABC-Analysis Sales and SalesPreviousMonth and SalesYTD all three in one and the same request.
    I did not find out how I can do different "order by" for my three different Formula-columns. I tried with UNION ALL but did not really get it until now (only the final result can be sorted, but I would need sort column in the subrequests to get correct A,B,C-Values).
    Did anyone already have a similar requirement? How did you solve it?
    Thanks for any hints.
    Thomas
    Edited by: Thomas L. on Jul 23, 2010 6:35 PM

    I am also baffled. I tried to find this "default Captivate quiz" in the help section of Captivate with no results. When I again contacted the representative, he closed the conversation before speaking with me.
    Thank you for choosing Adobe. A representative will be with you shortly. Your estimated wait time is 0 minute(s) and 4 second(s) or longer as there are 1 customer(s) in line ahead of you.
    You are now chatting with 'Khyati'
    Thank you for chatting with us. Please click the "Close" button on the top right of the chat window to tell us how we did today.
    I have posted the entire correspondence on Adobe Captivate's Facebook page in the hopes that I might get some swift assistance from the company.

  • SQ01 (ABC Analysis)

    Hi All
    For a query in SQ01,output format - ABC analysis. I find Key Figure & Features having a default value. I would like to know how can i make this field as selectable,
    eg: Key Figure at the moment is defaulted to Plnd Dlvy Time, say i want to have 2 more options, GR Proc Time & MAP.
    Where can i set the values of Key Figure for a given query, so that the user can then select the Key Figure & carry out the analysis. Also would like to know the same for Features, where i can add the options.
    Hope my question is clear, await inputs.
    Vivek

    Anybody who can help me on this issue?
    Vivek

  • Adjustment / ABC analysis

    Hi Gurus
    Can you anyone gimme a details of ABC analysis?? Is there any chance to change in the class automatically?(Ex A to B), In regualr scenarious how the industries are using and handling???
    Please gimme some ideas
    SP

    hi SP,
    ABC analysis is done to classify characteristic values in order of importance for particular key figures.This divides the material into
    >highly important
    >low important &
    >less important
    ABC analysis can be used in various ways like
    > MM- classify materials according to the key figure usage value.
    >PP-classify work centers in terms of the key figure scrap quantityu2019.
    >PUR- classify vendors in terms of the key figure invoiced amount
    There are following strategies used for performing the ABC Analysis
    >Total key figure in %
    here u define the cut offs in terms of values of char i.e >
                                              >70% in class A,
                                              >20% in class B
                                              >10% in class C
    so the 1st characteristic values which make up 70% are in A
    next char values which make upto 90% (20%) are in B
    and the rest char values which make 100%(rest 10%) are in C
    >Number of characteristic values in %
    here u define the cut off in terms of number of char i.e>
                                                 >10% in class A
                                                 >30% in class B
                                                 >60% in class C
    so in class A the 1st 10% of highest char come,next 30% of char come in class B and the rest come in classC
    >Key figure (absolute)
    here u fix the limit straight away like
    char values higher than 10 lac come in class A
    char values <10lac but >5 lac come in class B
    char values <5lac come in class C
    >Number of characteristic values
    here u deifine the number of char that u want to put in class A,B&C.
    like 1st 25 in A,next 40 in B & rest in C.
    so while creating the ABC analysis u'll get these 4 strategies from where u can choose based on the requirement.
    hope this is clear
    regards,

  • ABC Analysis TCode:MC40

    Is there any way to ignore the Consignment Material (K) while running the ABC Analysis using T-Code MC40 ???
    Your response is highly apperciated.

    Dear,
    Try this to get all stock material list using transaction MB52. In special stock select "Not equal to K (Consignment stock). This will gives you a report of stock materials exists in plant and storage location - excluding consignment.
    Using transaction MC40 insert this excluded list and run the ABC analysis.
    I found this only solution for this.
    Regards,
    Syed Hussain.

  • A question about ABC analysis for Cycle counting

    Hello expert,
    What is  RMCBIN00  used for? Currently, user asked me if we can copy  RMCBIN00 and perform ABC analysis by quantity? I have no knowledge about it. Can any expert give some clue?
    Thanks in advance,
    Best Regards, Johnny

    Hi
    RMCBIN00 is a standard ABAP report available within your SAP system (depending on your version and release level). Below is the standard documentation available for this report and a few details of other objects it interacts with such as tables, function modules, includes etc. If you would like to see the full code listing simply enter the object name( RMCBIN00 ) into the relevant SAP transaction such as SE38 or SE80
    RMCBIN00 -  ABC Analysis of Cycle Counting (Physical Inventory)
    PURPOSE
    This report runs an analysis for the chosen material types in the cycle counting method of physical inventory.
    FEATURES
    The analysis takes into account the consumption (usage) or the requirements values of the selected materials for the desired time period. You can decide whether you want to analyze:
    Only materials that have a cycle counting indicator
    All materials; that is, including materials that have no cycle counting indicator.
    Regards
    Anand

  • ABC analysis for Cycle Counting.

    Hi SAP gurus,
    I am facing a problem from the user. While doing the ABC analysis for cycle counting using the Transaction MIBC, he is getting an error " table T159c is not maintained for plant XXXX". when i checked it SPRO cycle counting is not done for that particular plant.
    My question is : Where do we maintainc CC Physical inv indicator ? I have checked at material level in Gen.Plant/Sloc view, it is not maintained . so may be they have maintained at Plant level. where do we maintain at plant level.?

    Hi
    1) Maintain the Percentages against A,B,C,D cycle counting indicators in OMCO
    2) Perform  MICN to schedlue the batch input session for Creation of physical Inventory documents
    3) MIBC-For ABC analysis for Cycle counting .
    Note : the percentages maintained in OMCO will decide on the classification of the material as to when the Physical inventory needs to be done based on either the consumtion values/Requirement values
    Regards
    Sandeep

Maybe you are looking for