Find Command in iCal doesn't work

I have tried to use the Find Command in iCal. It doesn't work either from the Edit pull down command nor the keyboard command. Please try this in your setup and tell me whether it works?
I have an Intel Mac Mini running 10.4.9.
Bob Gallant

Hi Bob,
It works for me.
Find will only search in selected calendars. Do you have the relevant calendars checked in the calendar list? (you can select all calendars by Command-Clicking one checkbox)
Best wishes
John M

Similar Messages

Find Command sometimes just doesn't work

Sometimes when I type into the input field in the Find function, nothing at all happens after I press Enter.
If I exit Lightroom, then restart it, the Find function will work OK.
I am running the Windows version 1.0 on a 3.01 Pentium 4, Win XP, which runs PS CS3 OK.
Stan

Hi Bob,
It works for me.
Find will only search in selected calendars. Do you have the relevant calendars checked in the calendar list? (you can select all calendars by Command-Clicking one checkbox)
Best wishes
John M

I just updated my computer to OS X Lion but my ical doesn't work, what do I do?

I just updated my computer to OS X Lion but my ical doesn't work, what do I do?

- Try connecting to comutr and then try to restor.
- If still white screen, let the battery fully drain. After charging for an hour try the reset and restore again.

Find function cntrl-f doesn't work for long pages. frustrating

find function cntrl-f doesn't work for long pages. Works find on your competitions IE, though I strongly prefer FF.
== This happened ==
Every time Firefox opened
== Several versions of FF

Hi Cb,
I did try that and it didn't work. the site in question (though I could pick any) is midwestmafia.com and I typed in capone (which is near the end of the page)
Works well on IE, though I'd like to stick with FF.

Voice command for Contacts doesn't work after a re...

Voice command for Contacts doesn't work after a reboot or a contacts restore.
Steps to reproduce:
1. Backup contacts. Open Files > Backup & Restore > Select Contact for Backup Contents and select Back up now.
2. Edit/save a contact, press and hold the call button, speak contacts name. The voice recognition works fine.
3. Restore contacts. Open Files > Backup & Restore > Select Contact for Backup Contents and select Restore.
4. Reboot phone when prompted.
5. Press and hold the call button, speak contacts name. The voice recognition does not work.
Work around:
Edit and save each contact.
Additional Information:
Social integration with contacts also does not work after a reboot. The facebook icon and "See what xxx is up to on Facebook" is not displayed. The same work around "Edit and save each contact" also applies. This occurs using the Nokia N8 and Nokia 808 Pureview.

Nancy2015 wrote:
I have my phone paired with my car, I can do everything except it does not recognize any of my contact names. If I try say a contact name, it says "not recognized" but if I say the contacts phone number, the name pops up onthe display in my car.
Has anyone had this issue, is there a setting I am missing in my phone?
Hello,
This is not necessarily and issue with the phone. It could also be an issue with the car`s bluetooth software that is only limited to some functions like reading your contacts list, last calls, missed calls, etc. which is most likely the basic 2.0 version.
The Z30 has the 4.0 version that has a lot more communication capability but if the car`s bluetooth its a lower version, then you will not be able to take full advantage of it unless you upgrade the bluetooth software in your car. Call your dealer and inquire about the bluetooth software upgrade in your car

HT2513 I updated the operating system on my Macbook to Mavericks OSX 10.9 the other day and now my iCal doesn't work. It gets stuck "moving calendars to server account" and never recovers. What can I do?

I updated the operating system on my Macbook to Mavericks OSX 10.9 the other day and now my iCal doesn't work. It gets stuck "moving calendars to server account" and never recovers. What can I do?

So I do.
I quetioned it also in spanish but nobody answered yet.

After Mavericks download iCal doesn't work, still - sending calendars to server.... nothing more, please help what to do Tx

after Mavericks download iCal doesn't work, still - sending calendars to server.... nothing more, please help what to do Tx

I had some initial problems with iCal too. At least for me deleting the prefs file solve them. The file is: com.apple.iCal.plist and it is in your Library/Preferences folder
The other thing your problem appears to be connecting to the server is to quit Calendar and then open System Preferences, select the Internet Accounts, and toggle off the Calendar checkmark of each of your calendar accounts. Quit System Preferences. Start the calendar. Since you've turned off the calendar server accounts there should be no beachballing. Quit, return to System preferences and re-enable one calendar account at a time. (This assumes that you are using more than iCloud Calendar) and then start Calendar again. And finally, for one particularly obnoxious iCloud issue I wound up deleting my iCloud account in System Preferences and then recreating it. (Same account name, etc, I just killed the account on my computer so I could start out with fresh preferences).

Command-X (cut) doesn't work in finder

If I use "Finder" and I want to "cut" a file the shortcut (command X) doesn't work and in the menu(edit) "cut" is grey.
I can only use drag&drop... in "textedit" it's possible to "cut" words!
What's going wrong?
Please help!
regards
soho

The original idea behind the Macintosh clipboard in 1984 was to allow for temporary cut/copy/paste actions inside applications for text and images. In Windows, cut/copy/paste was supported in the OS for actual files on disk, which really doesn't fit into the concept, but unfortunately became a very popular shortcut.
In OS X, Apple decided to add support for copy/paste for files. Cut was not added. If you cut something (like text), and then cut/copy again, you lose your original cut. Similarly, to avoid a possible mistake where cut could permanently destroy a file, it is not supported in the OS X Finder.
For most seasoned Mac users this isn't an issue, but for switchers from Windows it does seem a bit confusing. If you want to "cut" a file you really should just move it using drag&drop.

How do I fix a command key that doesn't work?

I bought a new iMac in December with the keyboard that comes with the system. Now my command key doesn't work. I've tried reseting to defaults in case I did something without realizing it, but it hasn't worked. The really strange thing is that it started working again once, then a few days later stopped again. Any one know what my problrem might be? It could be the keyboard itself, but if so, I'll be very disappointed!

Do SMC reset, in order for it to work it make take 2-3 attempts. You can find instructions by clicking Intel iMac SMC and PRAM resets

Search in ical doesn't work

I am using 10.7.4 and my iCal search doesn't work. When I type in a search term, the results pane is blank.
Help, please.

Brentbin,
Notice other posts, but where's the fix?
What have you tried?
Have you tried to...quit iCal, open System Preferences>Spotlight>Privacy, and add your Macintosh HD to the list?
Wait a couple of minutes, and then remove your Macintosh HD from the Privacy list. You should notice (after a short delay) that Spotlight is reindexing your HD. After Spotlight completes the index, open iCal and see if your search works.
;~)

Command+1 shortcut doesn't work in iTunes 7?

During the years of having iTunes 5 & 6, I used to have those keyboard shortcuts like command+1, command+2 to show the main window of iTunes and Equalizer. This function is really helpful when you choose one song to play, then close the iTunes window to save the space on desktop, then use command+1 to show the main window of iTunes again when you need it. Really convenient.
But since I updated the iTunes 7 yesterday, I sadly found out that the key stroke combination of command+1 doesn't work anymore. Now every time when you need the iTunes window to show up, you have to click the iTunes 7 icon on the dock again. And same as the command+2 for equalizer. Since iTunes 7 erased the equalizer icon on the main pane in the corner right below, this is really not so fast as before to get those windows showed when you need them.
This issue is really unlikely to happen because I checked the new help topics of iTunes 7, there still are the entries of command+1/2 in the help topics, but they just do not work!!! Is that a new bug of iTunes 7?
Anyone has any idea about solving this problem? Or did anyone found the new keyboard shortcuts? Thanks in advance!!!
PowerBook G4 17' 1.67Ghz Mac OS X (10.4.7)

Anyone has any idea about solving this problem? Or
did anyone found the new keyboard shortcuts? Thanks
in advance!!!
They can be created in System Preferences:
http://discussions.apple.com/thread.jspa?threadID=637814&tstart=0
Quicksilver dual-GHz G4, 1.83 Core Duo mini Mac OS X (10.4.7)

Find files in folder doesn't work

To make my photo galleries, I use CS5, because this is the last version that can use modified galleries that I was able to since CS3. My modified pages have links to other pages on my web site, while the ones that now come with Photoshop are dead end with no links.
So, another feature lost in later Bridges is the ability to show ALL the contents of a folder and its subfolders. To get around this, I choose to show folders whose metadata or filename DO NOT contain zzz, since none do. This has worked fine and I have made hundreds of galleries from my phylogenetic folder trees of species.
     Until I came to this gallery of Tachinidae. I have been updating all my Arthropod species galleries After I did the usual procedure, and created the gallery (and deleted the previous gallery both on my PC and the web), I noticed that the first image was a Belvosia, and there were non of the Archytas or other species that should have come before, alphabetically. I tried again and found that it was ignoring a lot of files in some subfolders that should have come up. I tried other finds, like all files ending in .tif, or all that had the keyword Tachinidae, and always the same result.
     Then I tried the same search in CS6 and it finds all, but of course I can't make my galleries here, I went back to CS5 and made a new folder TACHINIDAE 1 and moved all the files there and tried again, with no success. I tried a backup file with the same result. Rebooting didn't help.
     Today I tried again and as it did the search, I could see it indexing the Archytax subfolder and others that were not included, but now after over 30 minutes, all I have is a spinning circle and no items. I had gone back to other folders that I had made galleries of just before and they pull up all the images, as before, but this has stopped my progress in this project dead in my tracks.
     I can't make any sense of this at all.

Well now it's not working at all. I moved the folder to a higher level of my directory tree, with the same result. then I just tried a subfolder and it quickly found that there were no images, either that didn't have zzz or that ended in .tif.
Than I tried another family folder and it quickly found no images according to the criteria. So now the search function just doesn't work.

Find my iphone/ipad doesn't work

Hello everyone...
I open this discussion because find my iphone/ipad doesn't locate it when it conected on wifi and with the location and find my iphone/ipad activated.
I have tried everything that you can imagine and what you can't thing for solve this problem... Deactivating and activating the switches for location and FMi, deleting the icloud account, using another icloud account, and even restoring the device and reinstalling it from zero... I don't have any other idea and I hope someone can help me on it.
Thanks for your time

It could be the router (if you are using wifi). First try rebooting it and testing.
It could be that your ISP hasn't associated a location with the router (this is needed for location to be determined). In this case there's nothing you can do. To test for this case, try FMi at a public wifi location (most of them have the routers properly identified). If it works at one such spot, then you'll know it's your router. If not, then I can't offer any more suggestions, as the list you give above pretty much covers the usual troubleshooting routines.
An iPhone shouldn't have such problems, since it has GPS onboard. Likewise a 3G iPad has GPS (the wifi only versions do not).

TS3999 Argentina holiday link for iCal doesn't work, please help!!

İ want to add argentina holiday calendar to my iCal but the link on apple page doesnt work.

As you say the link doesn't work; neither does its originating domain alone. The note on the page concerned says that the calendar is valid only for 2010 and 2011, so evidently it's been withdrawn and not updated by its originator. I'm afraid that a number of the links on Apple's page have gone dead.

Executing command on startup doesn't work

Hello,
I'm trying to execute this script when X starts:
xmodmap -e " keycode 118 = Delete"
which works, when is executed manually from console. I tried to run it automaticaly after login and starting X by putting it into .zprofile, /etc/profile, /etc/profile.d/***, .xinit or to my awesome wm config (all other scripts here are executed normally - eg pulseaudio --start). But this command is never executed. I tried even variant with adding this to .Xmodmap and then add xmodmap .Xmodmap to .xinit, but without success.
Thanks

Kotrfa wrote:
Here is how my .xinitrc looks like:
#! /bin/bash
xmodmap -e " keycode 118 = Delete"
exec awesome
When I manually type this command, everything works. But it doesn't work after reboot (and .xinitrc is surely executed, because awesome starts ok).
xmodmap seems to be time sensible. Anyhow, on my WM startup file I have:
(sleep 10; xmodmap ~/.Xmodmap; sleep 5; xmodmap ~/.Xmodmap) &
I come to this by trial and error.
Has said I have it on my WM startup file, but having it on .xinitrc is also OK.
Mektub

Find Command in iCal doesn't work

Similar Messages

Maybe you are looking for