Find WBS element of level 3 for all WBS elements underneath

Hello
I need to find WBS element of level 3 for WBS underneath (level 4, 5, 6, 7........). What is the esiest way to do it?
Shall I use WBS element structure CP-1061-01-01 ..... or a techinal id of wbs element.
Thanks

Hi,
Check the below link it may help you
http://help.sap.com/saphelp_dimp50/helpdata/EN/d3/a5112fe32311d1a6ab0000e83235d4/frameset.htm
Regards,
Marasa.

Similar Messages

Query For Finding Yearly Opening and Closing Balance for All the Items

Hi Experts,
I am working on Query Based Report for finding the Yearly Opening and Closing Stock for all the Items
i will give yearwise selection and I want opening and closing stock in between that years
Warm Regards,
Sandip Kokate
Edited by: Sandipk on May 20, 2011 1:58 PM

Hi,
Declare @SDate DateTime
Declare @EDate DateTime
Declare @Whse nvarchar(10)
Set @SDate= (SELECT min(F_RefDate) FROM OFPR T1 where T1.[Name] ='[1%]' )
Set @EDate= (SELECT max(T_RefDate) FROM OFPR T1 where T1.[Name] ='[%1]' )
Set @Whse=(Select Max(s2.Warehouse) from OINM S2 Where S2.Warehouse = '[%2]')
BEGIN
Select @Whse as 'Warehouse', a.Itemcode, max(a.Dscription) as ItemName,
sum(a.OpeningBalance) as OpeningBalance, sum(a.INq) as 'IN', sum(a.OUT) as OUT,
((sum(a.OpeningBalance) + sum(a.INq)) - Sum(a.OUT)) as Closing ,
(Select i.InvntryUom from OITM i where i.ItemCode=a.Itemcode) as UOM
from( Select N1.Warehouse, N1.Itemcode, N1.Dscription, (sum(N1.inqty)-sum(n1.outqty))
as OpeningBalance, 0 as INq, 0 as OUT From dbo.OINM N1
Where N1.DocDate < @SDate and N1.Warehouse = @Whse Group By N1.Warehouse,N1.ItemCode,
N1.Dscription Union All select N1.Warehouse, N1.Itemcode, N1.Dscription, 0 as OpeningBalance,
sum(N1.inqty) , 0 as OUT From dbo.OINM N1 Where N1.DocDate >= @SDate and N1.DocDate <= @EDate
and N1.Inqty >0 and N1.Warehouse = @Whse Group By N1.Warehouse,N1.ItemCode,N1.Dscription
Union All select N1.Warehouse, N1.Itemcode, N1.Dscription, 0 as OpeningBalance, 0 , sum(N1.outqty) as OUT
From dbo.OINM N1 Where N1.DocDate >= @SDate and N1.DocDate <=@EDate and N1.OutQty > 0
and N1.Warehouse = @Whse Group By N1.Warehouse,N1.ItemCode,N1.Dscription) a, dbo.OITM I1
where a.ItemCode=I1.ItemCode
Group By a.Itemcode Having sum(a.OpeningBalance) + sum(a.INq) + sum(a.OUT) > 0 Order By a.Itemcode
END
I hope this will work for you.
In above query you can also user OFPR.Code, OFPR, Category OFPR.Indicator instead of OFPR.Name.
Regards
Vaibhav Anharwadkar
Edited by: Vaibhav Ancharwadkar on May 24, 2011 9:23 AM

In Mail, I can't find how to modify smtp parameters for all my account, I have yosemite...

Hello,
I have yosemite
if I add an imap account, I don't found how to access smtp parameter after closing and open mail app
it is same for gmail account, once added, can't find where to modify smtp
thanks

Open Mail preferences. Select Accounts tab, then Accounts Information tab in the window. You can edit the SMTP server list there for all accounts.

How do I find a SAR (radiation level) rating for the 7290?

Found a site that gives the SAR ratings for cell phones and of all the Blackberry's the 7290 seems to have the lowest. However, some of the numbers on this site did not match with the manufacturer's ratings so before I buy a 7290, I want to verify the SAR rating with Blackberry/RIM. How can I find out the SAR rating for the 7290?

Hi vissw,
Excel has a better function: linestat, I thought it was (I'm not sure because excel is localized for these functions), maybe linest.
In LabVIEW look foor 'general polynomial fit' it will do what you want, but I'm not sure it is present inevery LV version.
Ton
Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
Nederlandse LabVIEW user groep www.lvug.nl
My LabVIEW Ideas
LabVIEW, programming like it should be!

Find Your Stolen iPhones Once and For All

You just lost your iPhone (I had mine stolen last weekend). You panic and then you come to your senses. Ah! I'll use the "Find My iPhone" app. Thank you, Apple!
After frantically asking someone to borrow his/her/their iPhone to use the app, you realize that it's too late. Your iPhone has been powered off and the "Find My iPhone" app is useless.
However, that could have been prevented if there was something, ANYTHING to keep that iPhone turned on. Like, say, a passcode requirement before an iPhone is powered off?
Let's make this happen please! iPhones are an investment and they are treasured by their owners, like me. The "Find My iPhone" app needs to be more efficient because usually, it's our last hope of saving our iPhones and peace of mind. I think that a the installment of a passcode-requirement-prior-to-power-off would save many iPhones from being lost or stolen forever.
What do you all think?

However, that could have been prevented if there was something, ANYTHING to keep that iPhone turned on. Like, say, a passcode requirement before an iPhone is powered off?
An electrical device that cannot be powered off in emergency by anyone is dangerous. I doubt, that that will be feasible.

How can I save my finder arrange/sort options once and for all?

I'm opening the Finder View Options panel and resetting the arrange and sort options several times a day and it's driving me nuts. The Finder ignores my desperate pleas to apply these options system-wide and seems to purposely forget the options I chose the day before.
I notice that the Icon view, List view, and even the Cover Flow view in the Finder get a "Use as Defaults" button in the View Options. Those of us in the Column View don't get that button, though. What have we done to deserve this?
I'd like the Finder to now and forevermore open every window with the following options:
Column View
Arrange By > Kind
Sort By > Name
Can anyone help me make this happen? Thanks!

I've found setting the Arrange By to anything other then None gives different results then what I expected.
Select Column View from the Tool bar then open View Options and set Arrange By to None and Sort By to Name.
If you then see the names in reverse alphabetical order click on list in the tool bar then on the Name column header to put them right. in Alphabetical order, then switch back to column view on the Tool bar. you should be good to go from there
Whoever thought up Finders View logic should have their head checked.

Find contents in variant for all programs

Hi All,
I have to find out a string in variant for all programs which are using that string .
I have to find out this devcq1 string in varints for all programs.
How can i do that one?

Hi,
You can get the variant name from table VARID and then pass it to the FM RS_VARIANT_CONTENTS and search the return values for your specific content.
tables: varid.
select-options: s_report for varid-report.
data: begin of itab occurs 0,
            report like varid-report,
            variant like varid-variant.
data: end of itab.
data: i_val type standard table of rsparams with header line.
select report variant
from varid
into table itab
where report in s_report.
check sy-subrc = 0.
loop at itab.
CALL FUNCTION 'RS_VARIANT_CONTENTS'
    EXPORTING
      report        = itab-report
      variant       = itab-variant
    TABLES
      valutab       = i_val.
if sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
       WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
else.
    loop at i_val.
      ....            <-- search i_val for devcq1 string
    endloop.
endif.
endloop.
Regards.
Ferry Lianto

Audio level setting for music tracks in dance recital video project

I am editing dance recital using the CD music tracks and editing in the audience clapping, some of the music tracks have lower audio level than others.
I am setting up the audio levels between -3dB (for the lower audio tracks) up to -6dB (for the higher ones) including the audience clapping. I am making the adjustments by listening to the tracks on fixed output volume level.
My question is if the final output (DVD) will have the the same adjusted audio levels I am hearing, or should I just stick to fixed level (-6dB) for all the tracks? If so is -6dB ideal for DVD output?

Thanks for your reply Steve,
I normally watch DVDs on different sound system than the TV, however, from your answer I gather you're setting the master level -18 to -20db. If it is so, are you setting the individual tracks below that, and in my case where the audio levels of the original music fluctuate from high to low, would you set them all on the same level or adjust to hear them out the same?

How can I set a customized view in finder set as standard for ALL folders?

As I have a large number of folders, I need a specific view in finder: symbol view, sort by program and name. I tried to use this settings as standard for ALL folders, but using the 'set as standard' button does only work for the folder I am in, but not for ALL folders. I even tried to use this settings on the hard disk level in finder, but what ever I tried, it never applies to all folders. The problem occurs on each of my devices and on Yosemite OS 10.10.1. as well as Mavericks 10.9.5. Any ideas on how I can make the 'standard' work on all folders?

As Vinod says, unique key validator would be fine.
However, In Gabriel's blog:
Performing a unique key validation for an attribute that is declared to be unique in the database requires a round trip to the database. This is quite expensive and there is a fast and easy way to work around it.Is false on several fronts:
1). it's not expensive - it's actually cheaper than the alternative
2). Unique key validator can require many trips to the DB to validate - it must check all other rows in the EO to ensure there is no duplicate, and all of those rows must be fetched into the middle tier to do the validation: this is expensive.
The "cheapest" way to do this: unique constraint in the DB
John

How do you set the zoom level to Inherit Zoom for all bookmarks in a pdf?

How do you set the zoom level to Inherit Zoom for all bookmarks in a pdf?

beatngu13
I made an account just to "like" your comment and say that you are a god among men.
I've been searching for hours about how to make the zoom level persistent throughout following links in various PDF's I have, and most sources were saying to just buy acrobat pro and edit the bookmarks manually with it.
I saw that it was possible to write an application to change the property, and considered doing it after the only pre-existing custom application I could find was asking for $50.
Thanks to you, I no longer have to worry about re-zooming every time I click a bookmark, and I'm not out $50 or the time it would take to code an app myself!
From the bottom of my heart, thank you!

How to get available quantity in Inventory levels for all materials

Hi..All
I am Abap Developer and i have a Requirement that to Print a report that Displays " Inventory levels (available quantity) for all materials"
1) What tables can i use to retrive the data to get the Inventory levels (available quantity) for all materials.
2).What are the fields can used in that tables that use ful for end user.
Thank you,
Madhu .
Edited by: madhubabu rao on Oct 15, 2008 9:10 AM

Hi,
I'm not sure what you mean when you are speaking about inventory levels and available quantity.
I mean that you may have stock of 100 pcs of a certain material but from an open PrdOrd can come a reservation for this component (e.g. 20 pcs) that reduces this the available quantity (to 80 pcs).
If you want only the stock levels, you don't have to write any ABAP code, since MB52 report is designed for this purpose.
If you want to know the available stock (considering requirements (PIR, DepReq, SO), and stock-like MRP elements (PldOrd, PurReq, PrdOrd, PO, etc)) you should check report MD04 and examine how it works, which tables it uses (ST01).
http://iorboaz.blogspot.com/2005/04/get-md04-data.html
Regards,
Csaba
Edited by: Csaba Szommer on Oct 15, 2008 9:34 AM
Edited by: Csaba Szommer on Oct 15, 2008 9:34 AM

Query level formula is not working for all the amounts

Hi Friends,
In my production system I found new thing that in my query level I done some calculation (as per my requirement I done amount devide by 100 to get correct values)
It is working for all the amounts except 1or 2 amounts, im uploading same source file for all the amountsu2026 why it is happening like this u2026and is there any availability to change those 1 or 2 values at data base tables level or at any pleace (I hope in SAP it is may not possible)u2026can any body tell me why it is happening like this. u2026 because of this issue only my report is pending to sign off u2026.please can any body find the solution ASAP.
Regards,
VENKAT

Are they non decimal currencies?
If yes, create RKF1 on amount field excluding the currencies for which you are not getting currect values then in CKF or formula as RKF1 / 100. Similarrly create another RKF2 on amount only including the currencies which are excluded in RKF1, create a CKF or formula as RKF2/10000. Then created another formula wich adding CKF1 and CKF2.

Javadoc @throws clause at a class level for all methods

hello
If all my class's methods throw the same RuntimeException for the same reasons, is there a way to put a @throws clause at class level?
I mean, I don't want to duplicate my comments for each of the methods I have. Say I want to add extra information... It would be a pain to copy paste same
comment for all the methods.
Thx in advance, any help welcomed :)

kux wrote:
hello again
first of all, love your replay :). Nice to see people with good sense of humor :D
Ok, I made the story shorter. Of course I don't throw a raw RuntimeException. What I have is a subclass of RuntimeException. Basicly all my methods use a sql Connection and do a certain querry on a database. What I do is that I don't let checked SQLException propagate through my methods because the clients of the persistance layer should not be required to handle the low level sql exeptions.Correct!
Instead I catch them and rethrow them as DAOExceptions that SUBCLASS RuntimeException. Unusual... but... Hmmm... I can't say that's actually "bad practice", per se, but DAOException is traditionally a checked exception type thrown only from the very top of the DAO specifically so that clients must catch (or explicitly throw) it... Hmmm..
Basicly I used sun's DAO pattern: http://java.sun.com/blueprints/patterns/DAO.html.
That's be The GOF's pattern... but yeah, good choice.
I made the question shorter because this is not the point. The question was about javadoc, not my programming practices :)But, but, but...
Ok... Ah... Ok.... Ummm, No. At least Not That I Know Of... BUT, what you can do is summarise your exception handling strategy once in the class summary section, and just reference it in each throws clause... you can stick intra-page links in java doc (I've seen them, just not sure how they're done, I think the syntax is something like {@link:anchor}... but that's just something I once saw somewhere... not gospel.
Also, if a method has throws DAOExceptions for an "odd" reason (like invalid data retrieved successfuly from the database (yes, it happens)) then you can still document that case in the method.
If your exception handling is really worth talking about then an external article referenced in the class summary. We use a wiki (http://en.wikipedia.org/wiki/DokuWiki) for such purposes, and many others including research schedules and papers, and (increasingly) design doco, even though that's outside the "official process" we find the wiki so much more convenient (i.e. searchable), especially since it's become possible to convert (simple) word-doc's straigth to wiki markup.
But, but, but... Programming practices are so much more interesting than documentation... who ever complained about in the documentation (besides me I mean).
Cheers mate. Keith.

Number of Elements at this level --------------( 1 for Dimension Total)' ?

Hi All,
If we check the Dimension Hierarchy Property ..there is option like ‘Number of Elements at this level --------------( 1 for Dimension Total)’
‘Number of Elements at this level --------------( 1 for Dimension Total)’ ? in Dimension Hierarchy
What is the use of it ?

Number of Elements - What is it?

Warning: Could not find the customization level value for document

Hi All,
I am trying to upload the translation for one of the page at responsibility level.
I am getting following warning when running the below command.
java oracle.jrad.tools.trans.imp.XLIFFImporter $APPL_TOP/xmci/12.0.0/fr-CA/Translated/ARIACCTDETAILSPAGE.xlf -username apps -password apps -dbconnection "$AD_APPS_JDBC_URL"
Warning: Could not find the customization level value for document "/oracle/apps/ar/irec/accountDetails/webui/customizations/responsibility/51688/ARIACCTDETAILSPAGE".
The same is working fine if the translation is for some attribute at site or function level.
Did anyone faced this kind of issue.
Thanks,
Anoop

Anoop,
I am sure you would have verified the responsibility id in the target instance is 51688(may be source instance your resp id is 51688 and in target it is different).
Have a look at this below notes, it might help.
1077267.1 - Unable To Move Resp Level OA Personalization From 1 Env To Another
848851.1 - Attempting To Upload XML File Generates Error: Could not find the customization level value for document
Thanks.
With Regards,
Kali.
OSSI.

Find WBS element of level 3 for all WBS elements underneath

Similar Messages

Maybe you are looking for