Finder in column view has no expander divider on the last column

I deal with a lot of graphics on my computer and I have a lot of subfolders. While in finder in column view there is no expanding divider for the last column when it is showing a graphic. When I first open a photo or graphic in finder the last column shows the graphic smaller than regular size. In SL there was a column divider to expand only that last column so I could make the graphic larger to see it better. Now in Lion there is no divider on the right side of that last column to expand the last column where the grahic is showing. In order for it to finally expand I have to drag the right side of the Finder window all the way across my display until the bottom slider bar disappears and then that last column will expand. This is frustrating having to have my Finder all across my display just to get the graphic larger.
Is there a way to get an expander divider to show up for the last column when viewing a graphic in column view? I know I can click on the "eye" icon to see it, but the column view will expand the graphic larger than 100% so I can see more details.
Thanks for any and all help.
Connie

Yes, that is how my whole finder window expands across my display until the bottom slider bar disappears....then and only then does the last column expand. I have to have open as many as 8 columns to get to my graphic. Keeping the Finder window to a smaller size and using the bottom slide bar to navigate to the far right column is nice, but all I want is that far right column where my graphic is showing to expand so I can see it better.
Thanks but what you suggest only resizes the whole Finder window until it can expand no further, then the last column expands the graphic. But then my whole display is a huge Finder window.

Similar Messages

Is there a way to make the last column in finder auto expand?

I know that you can double click the double bar at the bottom right . . . but can't the finder be set to auto expand on the last column so i don't have to click that thing every time i wish to see the long named files ?
Perhaps i should just use Bridge but it seems so slow and cumbersome compared to Finder.
thanks for any advice.
PS . . . is this available on the newest OS . . . going to upgrade one of these days.

No, the finder's column view does not have auto resizing columns.
It does have auto condensing of file names for the narrow display.
Which is what you are trying to overcome.
To accomplish your task, switch to list view.
Select your file. Then switch back to column view.
The trick is to learn your FINDER command key short cuts.
command 1 = icon view
command 2 = list view
command 3 = column view.
So you would press [command] and [3] to view the columns.
Navigate about until you get a column of unhelpfully condensed names.
Switch to list view by pressing [command] and [2]
Select the file from the fully displayed names list.
At this point you can press [command] [down arrow] OR [command] [o] to enter/open the selected item;
or Switch back to column view by pressing [command] and [3] then continue browsing deeper.

How do I create a new row on tab out of the last column, last row?

JDev 11.1.2.1.0.
I've seen a few topics on this but none that I think were really very good solutions.
Use Case:
On tab out of the last column in the last row, a new row should be added to the end of the table. Bonus points for setting the focus to the first <af:inputText> of the newly created row.
Complications:
1. I'm having a heck of a time trying to find a function that returns the column's displayed index. Sadly, <column binding>.getDisplayIndex() returns -1 unless the user has manually re-ordered the column.
2. Value Change Listeners only fire if there is a value change. Guess that means I need to do client/server listeners to check each and every <af:inputText> for a tab press?
3. I'm not even going to get into setting the focus. With all the templates, regions, etc. going on, it's dang near impossible.
Any ideas on how to attack this one?
Will

Hi,
You will need to use the Run Engine Installation Wizard found on the Tools menu. In addition you need to create a installation set for the operator interface.
Look at Chapter 16 Distrubuting TestStand ( chapter 17 for version 2).
Once you have created your installation, install is on your new system.
The serial number etc is part of the process model. When you run the entry point 'Test UUTs' the PreUUT callback is executed which asks the user for the serial number.
Hope this helps
Ray Farmer
Regards
Ray Farmer

The Last Column in LOGIC 8 is partly cut off.

I know this sounds dumb, but the last column in my LOGIC 8 is cut off. This is the column which contains the folders and sounds of instruments, loops etc. It was there when I first started using it a few months ago but for some reason it just reduced to half it's size and and I cant see the other half. Tried to 'drag it open' but that dont work. Can anyone help !!!!!!!!!!!!!

Futz with it man. Is the arrange window too wide and off your screen? Open another arrange window, turn the lists view on/off. Drag the dividing line back and forth. Just futz around with it, it's most likely pilot error...

Unable to filter the report by clicking the last column's name

Hi,
I have interactive report page having lots of column. All columns were not fitting in the screen so I added a code in the region--- header and footer section---
<div style="overflow: auto; width: 1220px; height: 700px;">
I got a scroll bar at the bottom. But a new problem arised. When I am trying to filter the report by clicking the column name in the report page , a popup is opening for the first column but the pop up is not opening for the last column. For the middle columns, the popup is opening but not below its name. This pop is for filtering the report based on that columns.
Please give some idea to fix this bug.
Thanks,
Chandra Bhanu

You could try to display as many columns as fit your screen, and put the rest of your columns as form fields in a detail view, somewhat like this:
http://apex.oracle.com/pls/apex/f?p=vincentdeelen:report_details_in_iframe_v1
Please tell the steps how to do it.
Thanks,
Chandra Bhanu

A special character in the last column in my external table

Hello,
I'v made a external table that looks like this :
CREATE
TABLE "REC_XLS"
"FINANCE_DATE" VARCHAR2(50 BYTE),
"CREATION_DATE" VARCHAR2(50 BYTE),
"SENT_DATE" VARCHAR2(50 BYTE),
"REMARKS" VARCHAR2(200 BYTE),
"REMAINING_QUANTITY" VARCHAR2(30 BYTE),
"CODE" VARCHAR2(30 BYTE)
ORGANIZATION EXTERNAL
TYPE ORACLE_LOADER DEFAULT DIRECTORY "LOADER" ACCESS PARAMETERS (
RECORDS DELIMITED BY newline LOAD WHEN CODE!=BLANKS Skip 1 FIELDS
TERMINATED BY 0X'09' MISSING FIELD VALUES ARE NULL REJECT ROWS
WITH
ALL NULL FIELDS ( Finance_date,
creation_date, sent_date, Remarks,
remaining_quantity, code) location ( 'Finance.tsv' )
I exported the result in xls file and I saw in the last column a special character. The result of a copy and paste is prenseted here : "ABE
You should notice that the last quote is in the upper line instead of at the end of ABE. This means, I think, that there is a carriage return at the end. And the 0X'09' is the tab separator. How can I get rid of this character ?

my guess is that you run the load on unix server which uses default LF end-of-line character and the file has dos CRLF end-of-line, the easiest option is to change records delimiter in the DDL and replace "RECORDS DELIMITED BY newline" with code below
RECORDS DELIMITED BY '\r\n'in general end-of-line can be really any character, sample above shows CRLF but it can be TAB, space, | or any other character or set of characters. I have samples of special characters on my blog http://jiri.wordpress.com/2009/01/29/oracle-external-tables-by-examples-part-1/
hope this helps
jiri

Got a message that there is a problem with my Mac OS X Kernal. my PowerBook has crashed 4 times in the last week and happened when backing up to Seagate plus ext. hard drive.

my PowerBook G4 has crashed 4 times in the last week. I got a message that there is a problem with the Mac OS Kernal. Does anyone know what this means?

Kernel panics are usually caused by a hardware problem – frequently RAM, a USB device or a Firewire device. What external devices do you have connected? When trying to troubleshoot problems, disconnect all external devices except your monitor, keyboard and mouse. Do you experience the same problems?
To eliminate RAM being the problem, Look at this link: Testing RAM @ http://guides.macrumors.com/Testing_RAM Then download & use Memtest & Ramber.
Do you have an Apple Hardware Test disc? Running the Apple Hardware Test in Loop Mode is an excellent troubleshooting step for finding intermittent hardware problems. It is especially useful when troubleshooting intermittent kernel panics. If Loop Mode is supported by the version of the Apple Hardware Test you are using, you run the Extended Test in Loop Mode by pressing Control-L before starting the test. Looping On should appear in the right window. Then click the Extended Test button.The test will run continuously until a problem is found. If a problem is found, the test will cease to loop, indicating the problem it found. If the test fails, be sure to write down the exact message associated with the failure.In some cases, RAM problems did not show up until nearly 40 loops, so give it a good run.
May be a solution on one of these links.
http://support.apple.com/kb/TS3742 What's a "kernel panic"? (Mac OS X)
http://www.macmaps.com/kernelpanic.html Mac OS X Kernel Panic FAQ
http://www.index-site.com/kernelpanic.html Mac OS X Kernel Panic FAQ
http://www.thexlab.com/faqs/kernelpanics.html Resolving Kernel Panics
http://www.macfixit.com/article.php?story=20060911080447777 Avoiding and eliminating Kernel panics
http://macosg.com/group/viewtopic.php?t=800 12-Step Program to Isolate Freezes and/or Kernel Panics
 Cheers, Tom

How to avoid that the last column in a datagrid increase the width out of the window?

I have a datagrid with this configuraction:
<DataGrid.Columns>
<DataGridTextColumn Header="Column01" Binding="{Binding Property1, Mode=OneWay}"/>
<DataGridTextColumn Header="Column02" Binding="{Binding Property2, Mode=OneWay}"/>
<DataGridTextColumn Header="Column03" Binding="{Binding Property3, Mode=OneWay}"/>
</DataGrid.Columns>
The last column is a description, so the text can be a bit large. so I would like that the width don't be wnough greater than makes the datagrid has a width out side the window.
For this, I have read that I can use Width="Auto" in all the columns and in the last column width="*", but in this case all the coloumns has a very low width so I can't read anything.
The code that I have used in this case is:
<DataGrid.Columns>
<DataGridTextColumn Header="Column01" Binding="{Binding Property1, Mode=OneWay}" Width=""Auto"/>
<DataGridTextColumn Header="Column02" Binding="{Binding Property2, Mode=OneWay}" Width=""Auto"/>
<DataGridTextColumn Header="Column03" Binding="{Binding Property3, Mode=OneWay}" Width=""*"/>
</DataGrid.Columns>
I am using visual studio community edition and wpf 4.5.1.
Thank so much,

>>For this, I have read that I can use Width="Auto" in all the columns and in the last column width="*", but in this case all the coloumns has a very low width so I can't read anything.
Can't you just set an explicit width for the first two columns then?, e.g.:
<DataGrid.Columns>
<DataGridTextColumn Header="Column01" Binding="{Binding Property1, Mode=OneWay}" Width="100"/>
<DataGridTextColumn Header="Column02" Binding="{Binding Property2, Mode=OneWay}" Width="100"/>
<DataGridTextColumn Header="Column03" Binding="{Binding Property3, Mode=OneWay}" Width=""*"/>
</DataGrid.Columns>
There is also a MinWidth property that you can use to prevent the columns from being to narrow:
<DataGrid.Columns>
<DataGridTextColumn Header="Column01" Binding="{Binding Property1, Mode=OneWay}" Width="Auto" MinWidth="100"/>
<DataGridTextColumn Header="Column02" Binding="{Binding Property2, Mode=OneWay}" Width="Auto" MinWidth="100"/>
<DataGridTextColumn Header="Column03" Binding="{Binding Property3, Mode=OneWay}" Width=""*"/>
</DataGrid.Columns>
Hope that helps.
Please remember to mark helpful posts as answer to close your threads and then start a new thread if you have a new question.

Song purchases do not show up in the artist column but they do show up in the song column. What gives?

When you purchase songs, I have several artists that do not appear in the artist column. The songs appear in the song column, but they are not grouped in the artist column. What gives?

Make sure these tracks are not marked as part of a compilation in iTunes from under the Info tab of the Get Info window that can be accessed by right->clicking on a track.
B-rock

How to get the last column info of the given table

Hi All,
I want to get the last column information like :
column name, datatype of the last column in the given
table use PL statement. Please help.
Thanks,
JP

SCOTT@orcl SQL> desc emp
Name                                                  Null?    Type
EMPNO                                                 NOT NULL NUMBER(4)
ENAME                                                          VARCHAR2(10)
JOB                                                            VARCHAR2(9)
MGR                                                            NUMBER(4)
HIREDATE                                                       DATE
SAL                                                            NUMBER(7,2)
COMM                                                           NUMBER(7,2)
DEPTNO                                                         NUMBER(2)
SCOTT@orcl SQL> select column_name, data_type from user_tab_columns
2 where table_name = 'EMP'
3 and column_id = (select max(column_id) from user_tab_columns
4 where table_name = 'EMP');
COLUMN_NAME                    DATA_TYPE
DEPTNO                         NUMBER
SCOTT@orcl SQL>

I get a error message "To charge faster, use the cable and device that were provided with this phone" when charging my Samsung Galaxy note 3. I took it to a store last week and they said it has something to do with the last software update. They tried ch

I get a error message "To charge faster, use the cable and device that were provided with this phone" when charging my Samsung Galaxy note 3. I took it to a store last week and they said it has something to do with the last software update. They tried charging it at the store and got the same message. I was given another phone, I still get the same error with the new phone.

Wowuor,
Thank you so much for reaching to us today. I want to make sure that we get the device charging the correct way. There is no physical or liquid damage to the phone or to the power cord correct? Did this error just start to appear as of last week? Please keep us posted.
KevinR_VZW
Follow us on Twitter @VZWSupport

My ipod 4g has been working fine for the last 2 years until now, it wont charge or connect to itunes what so ever. it will connect to the dock and play music but just wont charge on any charger, computer,cord,anything. its making me so frustrated

My ipod 4g has been working fine for the last 2 years until now, it wont charge or connect to itunes what so ever. it will connect to the dock and play music but just wont charge on any charger, computer,cord,anything. its making me so frustrated i think it has somthing to do with the battery but im not sure because it still turns on. Im for sure that its the ipod and not the cord or outlet and charger. somone please help!!!!!! I tried everything besides opening it up.
I dont know what to do???????

Not Charge
- See:
iPod touch: Hardware troubleshooting
iPhone and iPod touch: Charging the battery
- Try another cable.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Issue with the last column stretching in ADF table

There is an issue wherein when I try stretching the last column of the ADF table to reduce its width it does stretch. But whenever I try stretching it back to this original position it doesn't despite having columnstretching attribute set to multiple and assign widths in percentages to columns . When I set the columnstretching attribute to none, the last column does stretch back and forth but on page load the table does not stretch to its full width despite having styleClass="AFStretchWidth". Now I dont want to be assigning fixed width in pixels to the columns. I would want the last column to stretch back and forth with columnstretching="multiple" and styleClass="AFStretchWidth". I see the same issue on components demo page as well. Tag Guide

If you are trying that each column gets equally stretched based on the browser, its not possible as adf doesn't supports that.
If your table is not stretching use styleClass="AFStretchWidth".
But if all your columns are not stretching you can only try setting column widths + columnStretching property (where you can specify which column to stretch to fill all the spaces)
Amit

My Verizon wireless service at my house has begun to degrade over the last 6 Month. It has begun to be very frustrating seeing how we switched over from Satellite to Verizon 4GLTE wireless device. How do I contact someone to see what the issue may be. Z

My Verizon wireless service at my house has begun to degrade over the last 6 Month. It has begun to be very frustrating seeing how we switched over from Satellite to Verizon 4GLTE wireless device. How do I contact someone to see what the issue may be. Zip Code 22580.

Out of curiosity how much data per month are you using? Another factor could be if neighbors have all done the same thing as you and the node is being overloaded on home internet use.

Default Carriage return in the last column when data is downloaded to Excel

Problem:
When you download data into Excel and if the last column of your excel is a numeric field, XMLP will add a carriage return (special character) to your numeric field. This feild will be considered as character field by excel.
Work Around:
When you build the template, create an empty column as your last column and leave E (or end-for-each) in that empty column.
Note:
If the last column is a character column then you do not have to do this.

I originally had that END:VCARD without any carriage return.
But I still get an extra carriage return at the end when the JSP renders to VCF
I'm using Tomcat running on Linux.
I found this, article which implies (but does not explicitly say) JSP in general adds a newline to the last line:
http://www.caucho.com/resin-3.0/jsp/faq.xtp (But its not tomcat either, so maybe this info is irrelevant).
Edited by: shogo2040 on Dec 22, 2008 3:31 PM - changed rendered to VCF from rendered to JSP

Finder in column view has no expander divider on the last column

Similar Messages

Maybe you are looking for