Finding Download for SAP Integration Kit Fix Pack 3.1 / ADAPT01412706

Hi all,
by using Crystal Reports 2008 V1 SP3 in combination with SAP Integration Kit 3.1 (SBOP INTEGRATION FOR SAP SOLUTIONS XI 3.1 SP3 WINDOWS (32B)) i get an error during the inportstep of the transports in our BW System.
This error is descriped and solved in Note 1484086
(https://websmp130.sap-ag.de/sap%28bD1kZSZjPTAwMQ==%29/bc/bsp/sno/ui_entry/entry.htm?param=69765F6D6F64653D3030312669765F7361706E6F7465735F6E756D6265723D3134383430383626)
Following the Notesteps there is one conclusion using the transport files from the "SAP Integration Kit to FixPack 3.1" . My problem is to find these named Fix Pack in the download area of the Marketplace.
An Fix Pack for the SAP Integration Kit itself seems to be not aviable,
therefore I tried several downloads beginning with:
Crystal Reports 2008 Fix Pack 3.1 - Click Once
Crystal Reports 2008 Fix Pack 3.1 - Redist Install
Crystal Reports 2008 SP3 Fix Pack 3.1
there are no transportfiles in any of these packages.
If any from you have some idea where to find the right transport files, please let me know.
Regards
Marco

Hi Marco,
you can go in Sap Support Portal -> Software Downloads-> BusinessObjects Downloads
in the left select "Search for Software Downloads" then in "Search Term" input:
BOBJINTGRSAP03P
You'll retrieve all available versions of IK SP3 with related fixpacks.
Regards.
Roberto.

Similar Messages

Core Dump when installing SAP Integration Kit Fix Pack 3.1

When installing the SAP Integration Kit Fix Pack 3.1 we are getting the following error message..
boperl.sh[88]: 9961568 Memory Fault (Core Dump)
This install is being done on AIX after the SP3 was installed.
Any ideas?
Thanks,
Deepti

DO you install the SP3 full version of the integration Kit?
Regards,
Stratos

No Connection after installing SP 2.3 for SAP Integration Kit

Hello Community!
We just installed Service Pack 2 and Fix Pack 2.3 (in this order) for SAP Integration Kit on one of our client's servers. Before that everything worked fine. After the installation I verify the CE connection in /crystal/rptadmin. The result is:
Unable to log on to Enterprise system. Reason: Unable to log on: Could not connect to server vm103:6400. Please check that the server name is correct, and that the server is running.
I checked the RFC connection in sm59 but that works normally. BW Publisher Service is also running. The servers (BW and BO) are on the same machine: Windows 2008, 64bit, SQL Server, BOE XI 3.1 SP 2.
The BW Publisher Trace log shows the following entry:
[Fri Feb 26 12:45:57 2010]     1480     6084     SAP bwcepub: Tracing is enabled.
[Fri Feb 26 12:46:17 2010]     1480     6084     Entering CPubReqPing::Process(1)
[Fri Feb 26 12:46:17 2010]     1480     6084     Logging on to Crystal Enterprise
[Fri Feb 26 12:46:23 2010]     1480     6084     ERROR: .\system_connectors.cpp [479]: l_pSessionMgr->Logon(l_bstrUserName, l_bstrPassword, l_bstrCMSName, l_bstrAuthMethod, &m_pSession) failed with return code l_hr = -2147219455
[Fri Feb 26 12:46:23 2010]     1480     6084     Leaving CPubReqPing::Process(1)
[Fri Feb 26 12:46:23 2010]     1480     6084     Dispatch returned with code 0 and message [See RFC trace file or SAP system log for more details]
When I try to log into BO Info View or CMC with my SAP credentials CMS crashes without any logs!
This is now the 2nd server with that issue!
Any ideas what this could be?
Thank!
phil

No, this happens only by logging in with SAP credentials.
CMS log file shows a huge list of entries like this one:
.\pluginhelper.cpp:276: TraceLog message 1
2010/02/26 11:46:49.316|>>|A| | 936|6040| |||||||||||||||assert failure: (.\pluginhelper.cpp:276). (0 : Error reading pin file E:\Business Objects\BusinessObjects Enterprise 12.0\packages\BusinessObjects_ClientActionSet_CrystalReport_UploadSet_dfo.xmlwarnings:
errors:
fatal errors:
Fatal Error in file: E:\Business Objects\BusinessObjects Enterprise 12.0\packages\BusinessObjects_ClientActionSet_CrystalReport_UploadSet_dfo.xml, line: 1, col: 1, Message: Invalid document structure
But I've got these entries on other systems too...

Port Forwarding for SAP Integration Kit

I've got a network where the BO server is behind a NAT. I can access the BW server from the BO server but when retrieving data I'm getting a C-PIC error in SAP log with code TIMEOUT. The first explanation I can find is that the BW server is trying to initiate a response but can't due to the NAT.
Are there certain ports that I can configure for forwarding in the NAT, in order to enable two-way communication? The only port I know of is the Tomcat port which I use to access InfoView and CMC.
Thanks

I'm running XI 3.0 and I can access the BW server via SAP Logon from the BO Server. The error I'm getting is:
*Trace file opened at 20080930 190555 GMT Daylight Time, SAP-REL 700,0,159 RFC-VER U 3 981833 MT-SL
======> CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=456
Excesso de tempo na estrutura de conexão (existe parceiro ?)
ABAP Programm: CL_RSR_MDX_COMMAND============CP (Transaction: )
Called function module: RRTS_PARSE_MDX
User: JOASOUSA (Client: 070)
Destination: MDX PARSER (handle: 2, 01645795, {531A8FDD-869B-F1D5-B431-00145E6A52A6})
SERVER> RFC Server Session (handle: 1, 01629716, {521A8FDD-B93F-F154-AFA1-000C294D8A52})
SERVER> Caller host:
SERVER> Caller transaction code: (Caller Program: WebIRichClient)
SERVER> Called function module: BAPI_MDDATASET_SELECT_DATA
Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 3295
CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=456
Excesso de tempo na estrutura de conexão (existe parceiro ?)
Error RFCIO_ERROR_MESSAGE in abrfcio.c : 1833
Where "Excesso de tempo na estrutura de conexão (existe parceiro ?)" is translated to "Exceeded time in connection (partner exists?). It seems like the BW can't reach BO. I'm going to read the installation manual to check NAT config.
EDIT: The problem seems to be with the MDX Parser RFC destination after all. Analysing that problem now.
Edited by: João Sousa on Sep 30, 2008 8:23 PM

SAP Integration kit for BO XIR2 with Crystal XI for BI 7.0 Front end

Hello Team,
We are in a little fix.
We have BOE XIR2, Crystal XI and working with old version of BI front-end 3.5.
We are upgrading to BI 7.0 frontend, but I am not able to trace out the SAP Integration kit for combination of BOE XIR2, Crystal XI and BI7.0.
Is such a thing available, If yes can someone send a link to that.
Regards
Lalan Kanade

Hi,
Thanks for the quick reply
I could trace this document. "BusinessObjects Enterprise XI Release 2 SP3 for Windows"
I checked in "Supported Data Sources for Crystal Rep" section, extract below
SAP BW Server 3.0b SAP GUI 620 or 640
SAP BW Server 3.1c SAP GUI 620 or 640
SAP BW Server 3.5 SAP GUI 640.
But we are using BW Server 7.0 with GUI 7.1 and that working fine even with BOXIR2 and Crystal XI with Old Front End for BI 3.X.
But when we are testing with BOXIR2 and Crystal XI with BI New Front End 7.0 its missing components from the query output.
So the SAP Integration kIt seems old & we need a new Kit which would work with BI New Front End 7.0.
Any suggestions on that
Regards
Lalan

SAP Integration KIT FOR SAP BO Edge 3.1 Trial

Hi,
The SAP Integration Kit 3.1 for BO Enterprise 3.1 is the same for BO Edge 3.1 Trial or there is a specific for BO Edge?
Because I did the download of BO Edge Trial in the SAP BO area, and install the SAP Integration KIT but the system doesn´t work.
thanks,
Rodrigo

i think that there is a specific Integration Kit for Edge
good luck
Amr

SAP Integration Kit for Crystal Reports

Hello,
I read Ingo Hilgefort's blog on BusinessObjects and SAP Part 2.
/people/ingo.hilgefort/blog/2008/02/19/businessobjects-and-sap-part-2
Does the current trial version of crystal reports available from businessobjects.com have this integration kit embedded in it?
If not, where can i find it?
Regards,
Suraj

hi shenoy,
SAP Integration Kit
The SAP integration kit includes drivers to allow connectivity to both R3 and Business Warehouse (BW). In addition, it includes a BW toolbar for Crystal Reports, a specific version of InfoView with Role-based links, sample iViews for Enterprise Portal, and an SDK in Java, COM, or .NET.
Reporting off R3 Data
The kit includes two drivers to allow Crystal Reports to connect to the ABAP data dictionary via a remote function call or RFC.
The Open SQL driver allows the user to connect to SAP R3, displaying the field and the short text description of the tables and fields. The developer can then join the tables accordingly, using the database expert, and then select the relevant fields from which to report. This driver displays not only transparent tables, but includes views, pool tables, cluster tables, ABAP data clusters, and ABAP functions. This driver is geared toward a technical person with functional expertise in joining the tables and then creating the report.
see link
http://safari.oreilly.com/0672329174/ch15lev1sec7#X2ludGVybmFsX1RvYz94bWxpZD0wNjcyMzI5MTc0L3BhcnQwMg==
http://diamond.businessobjects.com/node/18962
SAP Integration Kit
The SAP integration kit includes drivers to allow connectivity to both R3 and Business Warehouse (BW). In addition, it includes a BW toolbar for Crystal Reports, a specific version of InfoView with Role-based links, sample iViews for Enterprise Portal, and an SDK in Java, COM, or .NET.
Reporting off R3 Data
The kit includes two drivers to allow Crystal Reports to connect to the ABAP data dictionary via a remote function call or RFC.
The Open SQL driver allows the user to connect to SAP R3, displaying the field and the short text description of the tables and fields. The developer can then join the tables accordingly, using the database expert, and then select the relevant fields from which to report. This driver displays not only transparent tables, but includes views, pool tables, cluster tables, ABAP data clusters, and ABAP functions. This driver is geared toward a technical person with functional expertise in joining the tables and then creating the report.
Note
In Crystal Reports, you cannot check the SQL generated using the Show SQL Query option from the Database menu. You can check what Open SQL was generated by using SAP transactions.
The InfoSet driver allows the user to connect to an existing InfoSet, as defined by SAP transaction SQ02. Alternatively, you can use an existing ABAP query, as defined by SAP transaction SQ01. The benefit of this driver is that the user does not need to know where the data is stored or how to join the tables. Another advantage is that any prompts defined in the InfoSet become parameters in Crystal Reports.
Note
To test the InfoSet query, run the InfoSet using your SAP GUI and ensure that it is pulling the required data first before testing it in Crystal Reports.
Reporting off BW Data
When reporting off of BW data, the Business Objects' Integration Kit consists of three drivers that are used to pull data.
The BW Query driver enables the user to connect to a BW query. To enable selection of a query with this driver, Crystal Reports has its own toolbar, as shown in Figure 15.3, and the user needs to select the New Report icon from this toolbar. The user then selects the required BW query, and thus displays a listing of fields available in the query. The user can then create the report using any of those fields. Variables defined in the query automatically become Crystal Reports parameters. After the user has finished building the report, the user saves the report using the BW toolbar. This saves the report to BW, and if the user selects the option to do so, automatically publishes the report to Enterprise.
Figure 15.3. Crystal Reports after the SAP integration kit is loaded. Note the SAP menu and BW toolbar.
[View full size image]
Two new drivers have been added to the XI R2 version of the SAP Integration Kit.
The MDX query driver supports using Crystal Reports to report off either a SAP BW query or a BW Cube.
Furthermore, it adds additional functionality by providing support for
A structure in both the row and column of the BW query
Hierarchy node and hierarchy node variables
Free characteristics in a BW query
The Operational Data Store or ODS driver exposes the ODS tables, so that they look much like the tables of any relational database. However, because of the structure of the objects, it considers them to be like a database stored procedure.
Connecting to the ODS objects is not performed with the SAP toolbar described here, but rather by selecting the driver from the Data Explorer as shown in Chapter 1, "Creating and Designing Basic Reports." After the user has finished building the report, the report can be saved back to BW and published to Business Objects Enterprise by selecting the Automatically Publish to Enterprise check box, as shown in Figure 15.4.
Figure 15.4. The additional options after saving a Crystal Report to SAP BW.
Note
This publishing method requires some setup. Please refer to the Installation documentation for further details.
Note
Both the ODS and MDX drivers require SAP transports to be loaded on the SAP BW system. Please refer to the Installation CD in the Transports folder for further details.
Using OLAP or Web Intelligence to Report off BW Data
Included in the SAP Integration Kit are specific drivers to allow OLAP Intelligence and Web Intelligence to report off of SAP BW.
To connect to a BW cube or query using OLAP Intelligence, open the connection browser and select Add. Select SAP Business Information Warehouse and then proceed to fill in the relevant data, as shown in Figure 15.5.
Figure 15.5. The information required to connect to a BW cube or query from OLAP Intelligence.
[View full size image]
After you are connected, select the query or cube and process to build the report, as described in Chapter 19, "Creating OLAP Intelligence Reports."
Web Intelligence is new to XI R2 and requires that a universe be built on a BW Cube or Query. However, to aid in this process, Designer builds the universe for you. To do this, select SAP from the list of connects and fill out the required information, as displayed in Figure 15.6.
Figure 15.6. The information required to connect to a BW cube or query from Web Intelligence.
[View full size image]
Finish the remainder of the wizard and when you click OK, Designer generates the Universe for you. It may be necessary to move some of the objects around to suit your needs, but when you are finished, export to Business Objects Enterprise.
Note
Only the BW query driver does not require the query be released for external access. The Web Intelligence, OLAP Intelligence, and MDX drivers require the user to release the BW query. To release a query, select the query properties in the BW Query Designer and select the Extended Tab and then check Allow External Access to This Query.
Viewing the Reports
Your SAP reports can be viewed either via the SAP integration kit's InfoView or via SAP Enterprise Portal 6. The integration kit provides a number of sample iViews that can be imported by a portal administrator. These include
Folder iView The folders a user has access to are displayed, and from here a user can run her reports.
Alert iView Shows all the alerts that have been triggered by Crystal Reports. The user can then click on the report to view the report. The creation of alerts is defined in Chapter 11, "Using Record Selections and Alerts for Interactive Reporting."
Thumbnail iView This iView displays the Crystal Report as a thumbnail of the report. The user can then click on the thumbnail to run the report.
Note
These are sample iViews. The organization can create its own iViews via the provided SDK.
BusinessObjects InfoView for SAP is a unique version of InfoView designed for integration with SAP BW systems. This integration includes features such as the ability to log on to InfoView using your SAP username and password. Related to authentication is the ability to access your roles and the Crystal Reports saved to these roles. The roles are defined in Enterprise as folders. The user can also schedule reports in the different languages loaded into SAP BW. This creates an instance for each language.
for remainig info pls use the link
http://book.soundonair.ru/sams/ch15lev1sec7.html
very good link for sap integartion kit
thanks
karthik
reward me points if the above info is usefull.
dont forget

SAP Integration Kits version

I have SAP Integration Kits XI 3.1 installed, but do you know how can we know what version or Service Pack has been installed?
If for Crystal Report, I can go to Help ->About Crystal Report, there I see the version 12.2.0.290, so I know that it is Service Pack 2.
Kindly help

Go to Control Panel->Add and Remove Programs
find the Integration KIT in the list
click "Click here for more information", it will show the version
thanks
Amr

BOE SAP integration kit issue - Java connector

I am trying to install BO applications on one of the TPC system (TPC5).
BOE XI 3.1 Sp3 (using tomcat)
SAP Integration Kit SP3 win for IA32bit
For java connector i am using files from sapjco-ntintel-2.1.8 (tried using 2.1.9 and 3.0.5 as well)
BOE installation goes thru fine and Java Info view, CMC all works fine
Now when i try installing the integration kit it gives some problem during identifying the java connector
I did save the sapjco.jar file in C:\program files\business object\tomcat55\shared\lib folder as specified in all installation guides
But still it do not identify it properly and says Java infoview might not work properly.
So i still go ahead and see that Java infoview doesn't work. Neither does the CMC.
Though WebI still works fine and can acces data from SAP BI system properly.
I have looked a lot into forums but couldnt find the reason other than placing librfc32.dll, sapjcorfc.dll and sapjco.jar files in respective places.
(i did register the librfc32.dll using regsvr32 librfc32.dll)
I have tried installing and uninstalling this couple of times.
Also when i only uninstall the integration kit. Somehow the CMS server stops and doesnt start again.
and hence have to uninstall BOE as well. Any trick here will help too.
Could it be the SP3 version of BOE or SP3 version of the integration kit?
Or
Could I be missing some step?
Thanks
Ritesh

Hi Ingo,
I have installed it couple of times and since it didnt work I uninstalled it along with BOE and Crystal reports.
Now, I again installed only BOE and crystal reports.
I did try installing the integration kit but since it donot recognizes the Tomcat Web application server in the 3rd step
I donot proceed ahead.
The SAP Java connector file (sapjco.jar) is placed in a folder
C:\Program Files\Business Object\Tomcat55\shared\lib\
When running the integration kit, in the 3rd step when is asks for configuring the tomcat server it
has a default path of
C:\Program Files\Business Object\Tomcat55\
On clicking next it says files not found.
So i change the path to
C:\Program Files\Business Object\Tomcat55\shared\lib\
On clicking next it brings up a pop message saying
No Compatible Web Server found.
I stop there and exit the setup process
I tried verifying the version of librfc32.dll which is installed along with the installation of the SAP GUI (710)
Then for the SAP connector i download it from the service.sap.com\connectors the 2.1.9 version for 32bit
And copy sapjco.jar file into the above mentioned folder and
copy sapjcorfc.dll into C:\windows\system32 folder.
And then run the integration kit.
Thanks
RItesh

BOE XI 3.1 + SAP Integration Kit on AIX 5.3 with WebSphere 6.1 (SOLVED)

Hi everybody!
On a recent installation I encountered a problem with SAP Integration Kit using BW Query with prompts; I want to share with you what I did to solve this problem:
First of all, the environment:
IBM Server with AIX 5.3
BO Repository on DB2 9.5
Application Server IBM WebSphere 6.1
BOE XI R3.1
Crystal Reports 2008 SP1
After installing and configuring everything on the system, I encountered some problem launching in InfoView reports created with Crystal Reports 2008 based on BW query with SAP Prompts.
The error that I recieved everytime was:
com.sap.mw.JCO.$Function
What I did to solve this was:
1) Configure the absolute complete classpath inside the Application Server (path/sapjco.jar)
2) Put the sapjco.jar version 2.18 at 32bit (unix version) that you can download at https://websmp108.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000463654&
Hope this helping you
Bye
Andrea

Dear Gurus,
The issue I am facing is described exactly in the document "Upgrading to CR 2008 V1 / SP1" by Blair Wheadon.
The problem occurs when installing CR2008v1 and BOE 3.1 on the same machine.
The solution is to download and install SP1.
Unfortunately for me, I have downloaded SP1 but the installation is not going well.
Message prompts that installation files are corrupt and that I should download again.
I have downloaded twice. And tried several times.
So I guess it might be due to the platform.
But why wasn;'t the message displayed after BOE3.1 installation was completed?
Do you guys have an idea?
Alice

Default language settings in SAP Integration Kit?

Hi everybody,
I've the following problem:
If I create a report with the SAP Integration Kit (create new report from a query) I get a prompt where I can type in (System Number, User, Password and LANGUAGE). If I now choose as language u201CEnglishu201D and create a report, save it and open it in crystal again, everything is still fine. But if I go to refresh the report, I get a prompt where I can choose the SAP BW and type in the System Number, User and Password but not the LANGUAGE. After the refresh the names of the fields are still in English but the data is now in German (or just the technical names, depends on the language settings in the query).
For me it looks like that the language settings of the refresh are by default in crystal is set to German, but the software is English. I didnu2019t find any way to change the default language to English or save it in the report.
I already tried to change the language/regional/keyboard settings of my machine and also tried to change the language in the crystal formula field u201Clanguagecode%u201D.
But even if I could have a unique change in some system settings, it really will not help me, because I have some queries in German and some in English, depending on the actual BW system.
If the SAP Integration Kit gives me the possibility to choose the language during the creation of the report it should then remember the choice!?
Thank you for your help

Post your question to the Business Object Integration Kits forum

How to import the transports from the SAP Integration Kit into SAP system

Hi expert,
I read the forum "Re: Integration with SAP R/3 to realise i have not done the import of transport but i don't quite understand the statement give by "Sebastian Li".
"Unpack the SAP Integration Kit zip-file. It contains a transport-folder. Here you'll find a short manual which files you should import.
Copy the needed files on your sap-system in the correct folders:
- usr\sap\trans\cofiles
- usr\sap\trans\data
Use the transaction STMS.
Also take care of the sequence of importing. See the manual for details."
Can some one explain it in more details to me. I have unzip the SAP Integration Kit n in the transport folder got 2 more folder "ansi" and "unicode_compatible". How do i know which 1 to use? Where i should copy this files to?
Please advice.
thank you

Hi Rajesh,
check this : logon failed. you do not have the necessary rights to design reports
@Sri

Crystal Report XI R2 compatablity with SAP Integration kit

Hi All,
we have suggested to one of our customer the Customized pack of BO XI Edge series which include the licensing of Xcelsius , WEBI , Universe designer, SAP Integration kit and Live office...
He dont want to pay extra for taking the license for cryatal report 2008 as they already using the Crystal Report XI R2 version which they use to do reporting on non SAP data.
My question is :
1 - Now they want to do reporting ove SAP data using the existing CR solution they have is it possible ??
2- Will the integration kit support the CR XI R2 version ??
3- Can he publish the Crystal Report created by CR XI R2 to the Business Object Edge Series plateform ??
They just want to use CR to do reporting on data from R/3 side .
Kindly suggest.
Regards,
Mishra,Vibhav.

Dear Ingo,
Thanks for the reply.
Actally we have suggested to our client the latest Edge Series Standard pack solution , excluding the crystal report licensing.
My question is will the integration kit which comes along with the Edge series will support the existing Crystal Report XI R2 and can the it be integrated with BOE(can he publish the reports created with the earlier version to the Business Object plateform).
If the above sceanario is not possibe then we have to purchse the older version of integartion and i doubt if we can purchse it stand alone in that case we would be having two integration kits running to solve the purpose.
Kindly suggest.
Warm regards,
Mishra Vibhav

BO XI 3.1 SP3 - SAP Integration Kit: Transports

Hi All,
My question is regarding the transports that need to be imported into SAP system so that it can connect with BOE. We are connecting our BW system with BOE, please let me know whether we need to move all transports in BW system only or we have to move transports in R3 system as well.
Thanks in advance.

Hello Ingo,
Please help us in solving the below issue:
We have installed BO XI 3.1 version with the following configurations.
Windows 2003 Server, SP2 64bit Version
Java: JDK 1.7 and JRE 1.7
BW: BW 3.5 version
BOE in Tomcat 5.5 App server
SAP integration kit 3.1 32 bit (51040568.zip)
The issue is that while integrating BOBJ with BW to import all the roles for SSO, we are unable to find the exact JCO files for doing the same. We tried with JCO 2.1.8, JCO 2.1.10 and JCO 3.0, but all the versions turned futile. After the initial installation with JCO 2.1.8 version (as per to Installation guide) we found neither CMC nor Java Infoview are working.
Please help us in identifying the right JCO for the proper installations and do we need to install SAP integration kit 3.1 SP3 ? This is pretty urgent
Regards,
Rajib

Improvements SAP Integration Kit

Hi,
I am looking for a list which states all the improvements that have been done per Support Package and per FixPack for the SAP integration kit. Is there one? If yes, where can I find it?
Best Regards,
Eelco de Vries

Hi Ingo,
When I for instance read the release notes of SP3 then I do not see anywhere what has been improved.
http://help.sap.com/businessobject/product_guides/boexir2SP3/en/xir2_sp3_%20IntegrationKits_release_notes_en.pdf
More like howto install, deploy and known issues. But where does it say for instance: using BW query conditions have improved performance for Crystal reports...?
Best Regards,
Eelco de Vries

Finding Download for SAP Integration Kit Fix Pack 3.1 / ADAPT01412706

Similar Messages

Maybe you are looking for