Finding embedded word files when opening a powerpoint file with Keynote
I can't!
I have tried control clicking on the file and there is nothing. In the presentation there are icons that are meant to open word files but when I click them it just takes me to the next slide. I have been through all the menus and I am stuck.
I know that the files open for people using powerpoint but I suspect I am the only Mac user in the group of teachers using the files.
Welcome to the discussion boards, k1r5tymm.
Unfortunately, Keynote will not open Word files from within a presentation -- see this discussion about the issue, and possible workarounds. Your best bet is to follow Kyn's suggestion in that thread, and open the documents before you start the presentation, then use Command-Tab during the presentation to change between KN and Word. Or, if you have all the documents open, you could also use Expose's Show All Windows (the F9 key), which would allow you to select the document you want very quickly, and looks slick besides.
PowerMac G5 Mac OS X (10.4.4)
Similar Messages
-
When I open a PP with Keynote the slides are very small. How do I make them fit the page, like they did in PP?
I had the same problem.
Go to preferences, slideshow, and check the box "Scale slides to fit display."
Hope this helps! -
Why can't I open my Powerpoint presentations with Keynote in my new Ipad 4 although?
Im using Icloud to share the powerpoint file from my windows to my Ipad. But, I still can open my powerpoint presentations neither in my Iphone.. Can someone help me, please. Thank you.
I have checked the list of supported cameras and mine appears to be there.
Yes, the Panasonic FZ45 is listed but it was first supported by Adobe Camera Raw (ACR) 6.2.
http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
Then go to this table to see which versions of Photoshop are compatible with ACR 6.2: CS5 and later. Not CS3.
http://helpx.adobe.com/x-productkb/global/camera-raw-compatible-applications.html
So your options are to upgrade to CS6 or subscribe to CC (check out the Photoshop Photography Program: PS CC + Lightroom 5).
Or download the free DNG converter, convert all your FZ75 Raw files to DNGs then open the DNGs in CS3
http://www.adobe.com/products/photoshop/extend.displayTab2.html -
Any solutions for lost render/preview files when opening files?s
Have any solutions been found for the intermittent lost render/preview files when opening a large file? I have Premiere CS6. A large project file that I have been working on lately opened without a hitch with previews intact ...until I bought new faster hard drives and rebuilt the computer (built with the same drive letters). I just installed the latest updates. When I now open this file, a segment of the sequence always opens without previews, unrendered, no matter how many times I rendered the file previously. I don't use 3rd party plugins. I am using the warp stabilizer. I tried all the suggestions that I have found on the forums (using a blank sequence to close and open, unchecking “write XMD…” etc.) but none work. I checked the render/preview drive, and these files are on that drive but they will no longer link to the project. It now takes a good 15 minutes to re-render every time I open.
I may have found a solution. I took out the warp stabilizer, and then added it back in on the clips in question, and then re-analysed and re-rendered. So far, so good. It seems that bringing in the warp stabilizer effect in the file into the re-built computer needed re-analysing (as I do after this 2 day exercise.)
-
After the recent update, my documents moved from Finder to Word. When I moved the folders to Finder, I am unable to attach a file to an e-mail. Any Suggestions?
Back up all data.
Triple-click the line of text below to select it, the copy the selected text to the Clipboard (command-C):
/Library/Internet Plug-ins
In the Finder, select
Go ▹ Go to Folder
from the menu bar, or press the key combination shift-command-G. Paste (command-V) into the text box that opens, then press return.
From the folder that opens, remove any items that have the letters “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari, and test.
I've seen an unconfirmed report that the "Silverlight" web plugin distributed by Microsoft can also interfere with PDF display in Safari, so you might need to remove it as well, if applicable.
If you still have the issue, repeat with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again. -
Show a Flash animation frame when opening a Powerpoint presentation
Hi all,
I have a Powerpoint presentation that embeds a Flash
animation (swf file). I use Powerpoint 2003 and a Flash 9
animation.
The problem is that when the presentation is opened, no image
(in fact a frame of the Flash animation) appears on the slide that
contains the Flash object. Instead, a blank rectangle is displayed.
To make it appear, I must start the presentation in slide
show mode (here the animation is playing) and then return to
'Normal' view. The last animation image is then shown on the slide.
From now, if I save the presentation, close it and then reopen it,
no image is shown.
I have tried with different Flash animation versions and
noticed that an image is displayed for Flash animation when
compiled in Flash 7. In a Flash 8 animation, no image appears too.
It seems that a change since Flash version 8 avoids an image to be
displayed when opening the Powerpoint presentation.
Has anyone already met this ? Are there security or other
changes that will prevent a frame to be displayed when opening the
presentation ? Any ideas or Internet links will be appreciated.
ThanksHi Dave and thanks for the answer.
My embedded movie is playing well when we start the slideshow
mode for the presentation, because it uses the installed activeX
component (version 9 installed) to render it.
My problem is that no image (ie the last movie frame
displayed before exiting the slide show) is displayed the next time
the presentation opens, even if the file is saved.
Did you mean that, because the activeX version is newer than
the PowerPoint 2003 release date, the PowerPoint application is not
able to get the image (frame) the next time the presentation opens
(that is, the image to display is embedded into the activeX at a
specific location, which has changed between Flash player version 7
and 8) ?
PS: 1) I have opened the Flash 8 presentation in PowerPoint
2007 and an image is shown on the slide, which might confirm that
PowerPoint 2003 is too old to find the frame to be displayed.
2) I searched into the in-line/off-line documentation and I
found no paragraph speaking of the Flash version limitation.
Let me know if I am right.
Thanks again for the time taken to answer me.
Rico -
Outlook 2010 gives error when opening a PowerPoint attachment.
Outlook 2010 gives error when opening a PowerPoint attachment.
Hi All,
We have several VIP employees that are getting the following error on all PowerPoint documents that come as attachments from Outlook.
I have researched and tried the following steps and verified these settings are already applied.
I did find a work around but not a fix and our security team will NOT allow me to change this setting however if I uncheck the setting all employees can open the outlook attachment.
Any other ideas on a fix for this if I am unable to uncheck Enable Protected View.Hi Matthew,
This is a perennial problem, here is a thread which has a deep discussion about this issue:
http://social.technet.microsoft.com/Forums/office/en-US/07f710a5-a6ca-4256-8f27-6aac41a6b37e/outlook-2010-unable-to-open-word-excel-and-power-point-attachments-from-an-email?forum=outlook
It looks like nobady really find a solution there, the only workaround is what you have found - change the protected view setting in Trust Center. You will lose some security by doing this but it seems to be the only solid solution currently. -
What happens to entities on layers when opening FH MX files in AI CS 5?
Hi,
when opening Freehand MX files with multiple layers - and multiple entities on these layers -, we figured out that all entities are to be found on the first layer (alphabetic sequence) in Illustrator. In other words: the entire structure of our FH document is completely destroyed and all entities are lying on only 1 layer.
Did anyone of you encounter the same issue? And if so, did you find a solution to fix this problem?
Many thanks for your assistance in advance!
Greetings from sunny Germany,
AndreasMonika,
this occurs in any existing FH MX file we are opening in AI CS5. And we have hundreds of thousands of them. I don't think that our objects are somewhat "special" - just the regular types of paths, text etc.
What I find really amazing is that all existing layers within the FH MX file are properly being migrated into the resulting .AI file. To me, this means that AI CS5 recognizes and translates the layer structure correctly. So far so good - apart from placing/leaving the existing objects on their respective layers.
Strange, isn't it? -
Office 2013 applications cannot be made to show the "Documents" folder when opening and saving files
(Windows Server 2012R2 and Windows 8.1 PRO)
We are redirecting the user's "Documents" folder to the network (using Folder Redirection). The OS hides this fact however, and most applications simply see the "Documents" folder when opening or saving files, including Office 2003.
Office 2013 however displays the actual path, which in this case is:
\\sever1\redirect$\username\documents
Even if you forcibly set the "Default local file location:" in the Options Save area to the 'Documents' folder in, say, Word, Word immediately converts the local path to the network path.
Is there anyway to get Office 2013 to follow the virtual path? All of other apps follow it and expose the users only to "Documents".
Thank you so much.
DanaThere's nothing in my FAQ concerning screen savers, so I'm unsure why you decided to take that approach. From your description, it looks like you only tried a few of the suggestions before throwing in the towel. That's fine, it's your call.
I don't have the problems you described with 10.4.7. Usually when folks have problems after an update, these are caused by either installing an update on an already-corrutped system or they've installed third-party applications or hardware that have been rendered incompatible by the update.
Before installing software updates, you may wish to consider the advice in my "Installing Software Updates" FAQ. Taking the steps therein before installing an update often helps avert problems and gives you a fallback position in case trouble arises.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X
Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
I may receive some form of compensation, financial or otherwise, from my recommendation or link. -
Microsoft Word Hangs When Opening Document From SharePoint 2010 Document Library
I am running into an issue where Word hangs when opening certain files from a document library. When the issue occurs, Word opens and hangs at the Downloading <Doc URL> stage. I have tried disabling the SharePoint plugins in IE and that
makes no difference. I can download a local copy of the file and open in just fine. The file in questions exists in a separate document library where it can be opened just fine (The file was copied to the library where the issue is occurring by
a Workflow). The issue also has only occurred on .docx files and not .doc, however, not all docx files are having the issue.
Does anyone have any thoughts on what might be causing this?
Thanks.Hi,
According to your post, my understanding is that when you opened a certain files from a document library, it hanged at the downloading stage.
I tried to reproduce the issue, after coping by a workflow, the .docx files opened well in my environment.
Did the issue occur in other documents libraries? You can copy the files to a new documents library by workflow, then check whether it works.
For more details we also can check the SharePoint ULS logs.
C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\LOGS
Have you check your IE settings (Tools->options->connections->LAN settings->uncheck Automatically detect settings).
Please also use fidder tools to detect the process. You can download it by the following link.
http://fiddler2.com/
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support -
FM GUI_UPLOAD gives PC036 "Error when opening the download file".
Dear all
I'm having a problem with a particular PC.
A program which calls FM GUI_UPLOAD gives the error PC036 "Error when opening the download file".
The file we are trying to upload is a text file, with tab delimiter.
If the same user executes the same program from another PCs, it works fine.
If another user executes the program in the "problematic" PC, it gives the error.
So, the problem is PC-related.
I checked SAP GUI Codepage, and was the same as other PCs.
I cheched regional configuration, and was also the same as other PCs.
The operating system is Windows XP, and the SAP GUI version is 7.10, File version 7100.2.7.3077, Build 967944 , Patch level 7.
SAP version is ECC6.
I searched across forums, SAP note, and the web, but I couldn't find anything.
I would be grateful if someone could give me ideas.
Thanks in advance
JordiHello. The user accounts are have same privilegies (like both are "Power users")? Also the file system are the same in both PC NTFS or FAT32 (today i'm find FAT32 in enterprise ) If NTFS may be some Domain politics are not allow to save file correctly, or space are not enough....Try check this first...Regards.
-
Problem occurring when opening and saving files in AI SC5 with Windows 7
Hi, I ‘am a Graphic Designer and first time working in UAE Windows 7 is basically the only OS here. My PC is:
HP Elite 7000
Intel® Core™ i5 CPU 2.67GHz
4GB RAM
32-bit
Now to the problem, not that knowledgeable in IT stuff so here goes:
1. Problem occurring when opening and saving files in AI SC5 with Windows 7. (You will actually see a “Not Responding” word coming out while opening and saving files, whether small or large files)
2. Locked layers occasionally are moved accidentally.(Working on multiple layers is normal so we need to lock it specially the once on top. But there are times I still manage to select locked layers)
3. After typing and locking the text, pressing “V” for the arrow key shortcut is still added to the text that is locked. (After typing I lock the text layer with my mouse and Press “V” to activate the arrow key… yes the arrow key is activated but the text is still typing the actual keyboard pressed)
I’ve only use the brand new PC and installer for a month now. Not sure if this is compatibility issues or something else I’m not aware of.
Thanks in advance to people that will reply.
Cheers!!!Well I’m still wondering if it is compatibility issues because I’m also having problem with Photoshop CS5. These 3 are all bought at the same time (PC, Illustrator and Photoshop installers). The problem I’m having in Photoshop is not that too important, every time I Ctrl+O to view files, all PSD are shown in white paper like icons, no preview, and saving as well.
Or I just purchased a corrupted or pirated installers… Adobe updates are done every time I’m prompted. -
When I open a powerpoint presentation in Keynote I only see the first 8 slides
When I open a powerpoint presentation in Keynote I only see the first 8 slides. Any ideas?
Curious.
If I had this problem I would try the followinng:
open the PPt file in PowerPoint (or Open Office for Mac, which is a free and reliable option to MS Office) save it as a PPt file and open in Keynote
open in PPt or Open Office, save all the slides as individual TIFF files and bring those into Keynote ( builds would not work on individual text or objects on a slide but at least you have the content)
Open Office -
Feh showing black images when opening certain .bmp files
Hi all,
I've been using feh (I'm using imagemagick too) from quite a bit and today I noticed it shows plain black images when opening certain .bmp files, those files are obtained from a Java WebService and they may not be correcty formed, still firefox can correctly visualize them. Would it be possible to make feh correctly display them ?I've set Photoshop to ask me if there's a conflict with embedded color schemes but it doesn't ask when opening this file. So I presume it doesn't use any specific profile. (Can I check this directly somehow?)
EDIT: I've now set to ask if there is no profile embedded and Photoshop now says that the image has no embedded RGB profile.
My color profile within Photoshop is set to sRGB which is the default for my display.
When I try switching to other RGB profiles in the list, the colors change but the distortions are still there no matter which profile I choose. -
I have a MacBook Pro (purchased in 2011) with OS X Lion 10.7.4. I'm using Microsoft Office 2011 and cannot open older PowerPoint Files (non .pptx). It will always open the same .pptx file and then the machine hangs up and just keeps spinning.
Thank you - that all makes sense. It is, indeed, exactly what I did when I upgraded.
I'm also writing this on the machine that crashed a few minutes ago (I posted the crash in another thread). I got back with a 'safe boot' - as I have done a few times before.
I've also de-installed little snitch (and then done a safe-boot & then re-boot ) since that seemed involved. I de-installed Adobe flash, since that seemed to be a problem - I then re-installed the later, apparently fixed, flash. The most recent crashes don't seeme to have a problem with flash any more.
I've posted the various ( generally different ) crashes. I also posted a summary of the similar lines that turn up in most of the crashes.
Unfortuantely, I'm actually trying to use the machine to meet some urgent deadlines and all this is not making it at all easy.
I had had great hopes for 10.7.2 - I thought that the crashes must be pretty common, so would have a common aetiology. There do seem to have been some fundamental changes to the file sytem and to the video interface (that seems to cause problems to brand new iMacs as well as to my 2009 iMac).
Maybe you are looking for
-
I'm running iTunes on a PC laptop and ready to move music to an independent hard drive. We want to add more music to it. I have used iTunes for a while for iPods. My wife and I have new iPhone 5S and would like to access the cloud for different types
-
How to tell if someone is monitoring or spying on my usage/keystrokes
Is there a way to tell if your computer is being "watched" by someone? I have a suspicious feeling that my coworker (who is all things compupter savvy) has been monitoring my keystrokes and or looking at all of my usage on websits etc. This morning
-
Can't Use Built-in Ethernet-HELP!!!
I am trying to connect a slot loading 350 mhz imac to the internet through the built-in ethernet for a friend that needs it, but the network status pane (OSX.3 Panther) keeps saying the ethernet cable is not plugged in. I've tried several different C
-
How do I view content in Design view once everything is grayed out?
I was building a web site. When I switched from horizontal view to vertical view I was no longer able to view content in design view. The entire page was grayed out. I'm also not able to view content in design view in other web sites too. How do I
-
Bookmarks can't delete folder favorite
I Can't delete my folder of favorite. Before I have only one (star one) folder and now I have two.