Finding the manufacture date on an access point via software

I'd like to determine the manufacture date of our access points because we plan on converting to LWAPP? Can someone tell me the what CLI command to use and which field has the answer. thanks.

Hi Thomas,
Not sure about finding the Manufacture date (maybe you are trying to find out about the presence of a MIC certificate) but we did go through this coversion from Autonomous to Lightweight on our infrastructure last summer.In this process we did convert about 70 1121's and 1231's to LWAPP and it worked very well. Here are some relevant docs;
Upgrading Autonomous Cisco Aironet Access Points to Lightweight Mode
From this excellent doc;
http://www.cisco.com/en/US/products/hw/wireless/ps430/prod_technical_reference09186a00804fc3dc.html
The following Cisco Aironet access points have the ability to operate as autonomous access points or lightweight access points:
Cisco Aironet 1240 AG Series Access Points
Cisco Aironet 1230 AG Series Access Points
Cisco Aironet 1200 Series Access Points that contain 802.11g (AIR-MP21G-x-K9) and/or second-generation 802.11a radios (AIR-RM21A-x-K9 or AIR-RM22A-x-K9)
Cisco Aironet 1130 AG Series Access Points
Cisco Aironet 1100 Series Access Points that contain 802.11g radios (AIR-AP1121G-x-K9)
Cisco Aironet 1300 Series Access Points/Bridges (AIR-BR1310G-x-K9 or AIR-BR1310G-x-K9-R).
From this doc;
http://www.cisco.com/en/US/products/ps6521/prod_bulletin0900aecd80321a2c.html
Guidelines and Tools for Migrating to the Cisco Unified Wireless Network
http://www.cisco.com/en/US/netsol/ns340/ns394/ns348/ns337/networking_solutions_white_paper0900aecd804f1a23.shtml
Self-Signed Certificate Manual Addition to the Controller for LWAPP-Converted APs
LWAPP secures the control communication between the AP and the WLC by means of a secure key distribution. The secure key distribution requires already provisioned X.509 digital certificates on both the LAP and the WLC. Factory-installed certificates are referenced with the term "MIC", which is an acronym for Manufacturing Installed Certificate. Aironet APs that shipped before July 18, 2005, do not have MICs. So these APs create an SSC when they are converted to operate in lightweight mode. Controllers are programmed to accept SSCs for the authentication of specific APs.
http://www.cisco.com/en/US/products/ps6521/products_configuration_example09186a00806a426c.shtml
LWAPP Upgrade Tool Troubleshoot Tips
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_tech_note09186a008072d9a1.shtml
Also, 5 points for Eric! For all your great work here lately.
Hope this helps!
Rob

Similar Messages

  • HOW DO I FIND THE MANUFACTURE DATE OF HP DESIGNJET 4500PS

    DESIGNJET 4500PS SERIAL# sg64uny00h manufacture date

    Hello bahne:
    Welcome to HP forum. Right here: http://h10025.www1.hp.com/ewfrf/wc/searchResults?tmp_product=HP+Designjet+4500ps+Printer&product=114...
    Please click on Kudos if this answers your question. Thank you. frrw

  • How can I find the manufacture date of my Macbook?

    I'm want to sell my old Macbook 13.3".  I think it's model A1181   I think it is from 2008 but I'm not sure.    Is there a way to tell from the serial number?   It's RM847LXM0P1.
    Thanks.

    Go to this site, and type in your serial number.
    http://www.appleserialnumberinfo.com/Desktop/index.php

  • How to find out the "manufacture date"?

    Hello!
    Can you tell me how to find out the manufacture date of my Satellite A110-334 with the serial "SY6224123K"?
    I need this information for my insurance!
    I found only this link for HDD`s: http://www.storage.toshiba.eu/index_manual.php?pid=220&sid=536&la=en
    But there is no "S" on the first digit!??
    So it is maybe "Y6" which can be November 2006! Is this right?
    Thank you!
    ===========
    This is the information on the link above:
    How to encode a Toshiba Hard Disk Drive Serial Number?
    The Toshiba serial number (S/N) includes details of the date of manufacture. The first digit of the serial number indicates the Month of manufacture and the 2nd digit indicates the Year.
    Example:
    M Y x x x x x x x
    M = Month
    Y = Year
    The month digit goes from 1, for January, through to 9, for September, and then X, Y and Z, for October, November and December.
    Examples:
    2 8 1 7 0 0 0 1 A
    2 = February
    8 = 1998
    3 0 5 4 4 3 0 6 T
    3 = March
    0 = 2000
    X 9 D 7 8 3 3 1 T
    X = October
    9 = 1999
    The remaining digits contain information about factory and production line, and some digits are reserved for a continuously running serial number.

    Hello
    Try with http://gedb.toshiba.com/
    Let me know if you find info you need.

  • The manufacture date of T400 WXGA TFT LCD monitor

    I ordered my new T400 in October, 2009, and recived almost three weeks later. Definitely, it took longer time than they promised me. Whatever, I got the laptop, finally.
    Now I have a question about the monitor. I used a software named EVEREST 5.30 (http://www.lavalys.com) to check the information of the hardware. Everything is okay except the monitor. It says the manufacture date is 45th week in 2006? Can you believe it, a monitor, potentially, made three years  ago for my new laptop???
    I called lenovo, and they told me the LCD factory is probably using the same date for all monitors of this kind no matter when they're made. Can you believe it?
    They didn't have such complain before. If I can find different case for T400 with same kind monitor, they will accept my complain. Am I responsible to prove that or lenovo's?
    Anyway, we can do that, right? Hey, all T400 people, it's time to show our power! What's your manufacture date of the WXGA TFT LCD monitor? I will appreciated if you can post your LCD manufacture data as well as when you bought you laptop!  Many thanks to everyone.

    My point is that even if the LCD sat for 15 years if it wasn't in use it wouldn't be prone to any more failures then one which is only a year from manufacture with the same amount of hours on it. 
    Though I don't have intimate knowledge of every laptop which Lenovo has manufactured but I have personally swapped a T61 15.4in widescreen into a T500 15.4in.
    It is probable what they are saying is that your laptop screen could not be that old because it is improable one would be in storage for that length.
    bosomfriend wrote:
    What you said could be true.
    However, I don't think customers prefer a LCD made several years ago, even the quility may be better.  I have only one-year warranty, who knows what will happen after that.
    BTW, the "old" LCD I mentioned doesn't mean a used one.
    Thinkpad T500-2081 CTO | T9400 2.53GHz | 8 GB RAM | ATI HD3650 + Intel GM45 | 15.4" LED WXGA+ | Windows 8 | ATI Catalyst 13.1 (non-switchable)
    Thinkpad 390x | PII 333 | 256mb ram | NeoMagic 256AV | SVGA LCD | OS/2 v4.52

  • How to get the manufacturing date of iphone 5s?

    how to get the manufacturing date of iphone 5s?
    thanks

    Enter your serial number here:
    www.appleserialnumberinfo.com/Desktop/index.php
    To find your serial number:
    Settings > General > About > Serial Number

  • I cannot find the new data in the database

    Hi
    I'm newbie at SQL.
    I read and watched a lot about the SQL. But still can't figure out the problem.
    THE PROBLEM:
    we are using accounting software for our business.
    the software keeping records of clients names and other information.
    when I open the software, i can access everything, but i can't edit the File Number for example.
    So I tried to access the files from within windows. Then I learned that the files I'm looking for are called Database.Which brought me to SQL server.
    short story: I opened the database using SQL server but it contains only data that are three years old.
    How i can find the new data. Right now the database seems to have only 97K records.

    well, what i did is open SQL server, selected the database, then scroled to the Clients Table then opened it.
    I can only see the ID and Name, other information is always NULL
    I scrolled down to the last one which has ID 97000 for example.
    Then I went back to the Application, from there i can see the other information about every client, and i can see that this client file was created like three years ago
    I started to think that the application is using a different database
    even though I searched for any MDF file or a file that was recently edited, I can't find anything else

  • To find the latest date and time

    HI all,
    I have a Ztable which contains execution date and exe time.
    1) I need to find the latest date and time How  can we do this?
    2) In my program,I need to insert some values to date,time and status field in Ztable. How can I insert it directly into the table?
    for eg ZTAB-DATE = 010122006
            ZTAB-TIME = 12.20.20
          just INSERT ZTAB is enough or NOT????????????
    POINTS WILL BE REWARDED
    THANKS IN ADVANCE

    1) You can do a number of things, one you can get all of the relevant records and sort the internal table by date and time in decending order, then simply read the first record of the internal table.
    2) It depends on the key of the table. Say for example, you have a table like so.
    MANDT
    KEYFIELD
    DATE
    TIME
    If the key alreays exists, you can use the modify statement to update the record, if it dosn't exists, you need to use the INSERT statement to insert the records.
    data: xtab type ztable.
    xtab-keyfield = 'ABC'.
    xtab-date = '20070207'.  " or sy-datum
    xtab-time = '221600'.    " or sy-uzeit.
    insert ztable from xtab.
    Make sure to use internal fomat for DATE and TIME.
    Regards,
    Rich Heilman

  • HT4839 I cant find the cellular data setting on my iphone how i can fix it

    i cant find the cellular data setting on my iphone
    how i can fix it
    because I can't use the internet with my iphone right now

    If you go into Settings>General>Network, you should still be able to access VPN settings. My listings show Cellular Data, Data Roaming, Set Up Personal Hotspot, VPN and Wi-Fi. I do not use Personal Hotspot (tethering) so mine says Setup. However, VPN settings are different than cellular data settings. Not sure which you are asking about now.

  • Need to know the sqluery to find the disabled date from OIM 9.1.0.1

    Hi Experts,
    Need very urgent inputs from you all for the preparation of our audit.
    We are using OIM9.1.0.1
    We need to know the sqlquery for finding the Disabled date in OIM given the user ids, as currently we are unable to get the exact data from Historical Reports Option in OIM.
    I need to give in this format:
    select usr_login, usr_disabled from schemaname.tablename where usr_login in
    ('aaa','bbb'..... etc)
    We have three attributes :USR_DISABLED_BY_PARENT,USR_DISABLED,USR_DEPROVISIONING_DATE,but none of them give the exact date,
    USR_DISABLED gives just a flag as 1 or 0.
    Also there are no other fields in the corresponding usr table.
    So how to fetch the exact Disabled date from OIM system when I input the user ids.
    Your immediate response is appreciated.
    Thanks
    SS

    In the entire thread many experts have given nice queries in different formats...
    The best approach would be to open up the SQL Developer, connect with the OIM Database and experiment with all sorts of SQL queries provided by all the experts..
    Learn some SQL techniques, like Inner Join etc...
    Then you yourself will be able to figure out what you need, in exactly which format, for which users and for whom you have to restrict
    Then not only this question, you would be able to solve dozens of similar such issues yourself...
    And trust me, nothing can match that...
    Just in case, you are not familiar with SQL Developer,
    http://www.oracle.com/technetwork/developer-tools/sql-developer/downloads/index.html
    Oracle SQL Developer 3.2.1 (3.2.10.09.57)
    September 24, 2012
    The Disabled DATE will be the creation date of that entry in the UPA_FIELDS table when Users.Status changed to Disabled.
    SELECT USR.USR_LOGIN, UPA_FIELDS.CREATE_DATE
    FROM UPA_FIELDS
    WHERE UPA_FIELDS.FIELD_NAME='Users.Status'
    AND UPA_FIELDS.FIELD_NEW_VALUE='Disabled'
    AND UPA_FIELDS.UPA_USR_KEY=USR.USR_KEY
    AND USR.USR_LOGIN NOT IN ('XELSYSADM', 'XELOPERATOR', 'WEBLOGIC');

  • Query to find the list of users having access to a particular scenario

    Hi,
    I am learning Hyperion Planning 9.2 x version. I wanted to know the query to find the list of users having access to Plan Iteration - 1 scenarion.
    As I am new to Hyperion Essbase and Hyperion Planning, I am assuming these ideas work out to get the desired result.
    1) As Hyperion Planning uses Relational DB to store the User Security information, we can query the list of users who is having access to Plan Iteration - 1 Scenario.
    I am not sure if this solution works. Please correct me If I am wrong.
    2) We can also query from the essbase editor to find out who all having access to this scenario.
    If the above is correct, can you please provide me the query.
    I am really need of this and I will be happy if any one provide the solution.
    Thanks & Regards,
    Upendra. Bestha

    Hi,
    If you are looking for some SQL to retrieve the access rights by member then you can use something like (SQL Server code though can easily be modified for Oracle)
    SELECT usr.object_name as Username,mem.object_name as Member,
    'Access Rights' = CASE acc.access_mode
    WHEN -1 THEN 'None'
    WHEN 1 THEN 'Read'
    WHEN 2 THEN 'Write'
    WHEN 3 THEN 'Write'
    ELSE 'Unknown' END,
    'Relation' = CASE acc.flags
    WHEN 0 THEN 'Member'
    WHEN 5 THEN 'Children'
    WHEN 6 THEN 'Children (inclusive)'
    WHEN 8 THEN 'Descendants'
    WHEN 9 THEN 'Descendants (inclusive)'
    ELSE 'Unknown' END
    FROM
    hsp_access_control acc, hsp_object mem, hsp_object usr
    WHERE acc.object_id = mem.object_id
    AND acc.user_id = usr.object_id
    AND mem.object_name = 'Plan Iteration - 1'
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Is it possible to find the creation date of a contact in icloud?

    I would like to find the creation date of a contact in icloud, I don't know if it's possible ? many thanks

    I don't think you're going to be able to do this. The problem is that the data on an audio CD is in a special format (caslled Solomon-Reed Cross Interleave if you really want to know) in which eveything is in a single stream with special error protection, and a table of contents at the beginning listing where each track begins. When you put the CD into a Mac the Finder shows the tracks as AIFF files, but this is an illusion; since the Finder is doing this on the fly it shows them as created at the time of insertion (I don't know why you're getting 'yesterday'). If you drag them to the Desktop then they will be converted to AIFF in the process.
    I don't know what a PC does: but the CD's data isn't a computer-type file and doesn't contain the creation date, so it's academic.

  • HT3939 i want to know the manufacture date of serial c39hgm9udtd2

    I want to know the Manufacture date of C39HGM9UDTD2
    if possible how to check the history of the phone like year of production, month of production, Model colour, Billed Date, Etc.

    https://selfsolve.apple.com/agreementWarrantyDynamic.do

  • How to find the creation date for a released requests..

    Hi friends ,
    In se09 tcode , we a date which represents the last changed date .. Now , for a particular Released request i want to find out the Creation date for it . How can i find it . I checked the tables like E070create there also we have requests that not released yet , i have also checked se03 and other tcode and a fn mo dules like TR_READ_GLOBAL_INFO_OF_REQUEST .
    So how to find the creation date for a released requests. Iam waiting for ur inputs..
    Thanks in advance..

    hi,
    Did u found the way to get the request creation date?
    I also need the same information.
    This needed for audit purpose........so it is must.
    Please help me in this.
    Best regards,
    vinod

  • Function Module to find the Begin Date of the Year

    Hi Experts,
    Could you let me know if there is a FM to find the "Begin Date of the Year".
    I appreciate your help.
    Thanks a lot.

    Hi,
    Do you want the Begin date of the <b>current</b> year..Try this..
    DATA: V_DATE TYPE SY-DATUM.
    V_DATE = SY-DATUM.
    V_DATE+4(4) = '0101'.
    WRITE: / 'Beginning date of the year ' , v_date.
    If you are mentioning about the Fiscal year..Then you can use the FM PERIOD_DAY_DETERMINE
    Thanks,
    Naren

Maybe you are looking for