Finger print sensor and SimplePass Software is not working

Hey there,
I have a HP Pavilion dv7-6c95dx and the finger print sensor and SimplePass Software is not working.  I am unable to find the relevant drivers/etc from the HP website.  Any advise would be appreciated.  The device was purchased in the USA.
Thanks.
This question was solved.
View Solution.

Hi:
I believe this driver from the dv7t-7000 will work as well as the security software to register your fingerprint.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-103013-1&cc=us&dlc=en&lc=en...
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-117897-1&cc=us&dlc=en&lc=en...

Similar Messages

  • Cant unlock with finger print scanner and alternate password is not working...only have a few tries left before it resets to factory...help please???

    Is there a default password???

    If you activated Android Device Manager on your phone and associated it with your Google account, you may be able to use Android Device Manager to unlock your phone. 

  • My finger print reader for dv6-3025dx is not working: can i fix it by redownloading the software?

    I was asked to download the Digital Persona Finger Print Reader for Consumer NB for my dv6-3025dx Windows 7 notebook and after that my fingerprint reader stoped working. The status has an "X" rather than a check mark, I tried redownloading it but if failed again. Is there any other way I can fix it? Thank you

    I was asked to download the Digital Persona Finger Print Reader for Consumer NB for my dv6-3025dx Windows 7 notebook and after that my fingerprint reader stoped working. The status has an "X" rather than a check mark, I tried redownloading it but if failed again. Is there any other way I can fix it? Thank you

  • Finger print scanner of my hp dv6 not working laptop running on windows 7 home primium x64 efition

    my finger print scannernot working 
     tried almost all posible measures.
    staarting from recovery to early time to reinstalation of software and hardware
                                             expect u people will help me !!

    Hello drzahidamc,
    What is your product number?  Once I receive this information from you, I'll send a document with troubleshooting steps that will help to resolve your issue.
    Thanks,
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • My finger print access to my phone is not working how do I repair it

    My finger print access on my iPhone was working now it is not.  How do I fix it?

    Set up Touch ID with your fingerprint - Touch ID - iPhone Basics - Apple Support

  • Print screen and Function "fn" key not working.Mute button stays red constantly.

    Hi,
    I bought an hp pavilion dv6-2154ca two weeks ago. It has windows 7 64-bit, nvidia Geforce 210m 1Gb graphics card, and my function "fn" key is not working at all. I downloaded the quick launch buttons driver a few days ago, according to the advice of an hp advisor, so any suggestions on how to get my fn key working. 
    My mute button stays red, even when the volume is on and i'm watching videos. This problem didn't exist until i downloaded the audio driver.
    My print screen key doesn't work either, i got to know it when i was trying to print screen images for school work.
    Thanks.

    Woudl advise a BIOS upgrade when downgrading to Windows XP, the European BIOS driver for your version of notebook is;
    [BIOS upgrade |http://uk.computers.toshiba-europe.com/innovation/download_driver_details.jsp?service=UK&selCategory =2&selFamily=2&selSeries=178&selProduct=784&selSho rtMod=null&language=13&selOS=10&selType=all&yearup load=&monthupload=&dayupload=&useDate=null&mode=al lMachines&search=&action=search&macId=&country=8&s electedLanguage=13&type=all&page=1&ID=65754&OSID=-1&driverLanguage=42]
    When the BIOS has been installed, re-install the Hotkeys/Controls driver on the link below;
    [Hotkeys/Controls driver |http://uk.computers.toshiba-europe.com/innovation/download_driver_details.jsp?service=UK&selCategory =2&selFamily=2&selSeries=178&selProduct=784&selSho rtMod=null&language=13&selOS=10&selType=all&yearup load=&monthupload=&dayupload=&useDate=null&mode=al lMachines&search=&action=search&macId=&country=8&s electedLanguage=13&type=all&page=1&ID=63996&OSID=1 0&driverLanguage=13]
    Also would advise upgrading the common modules;
    [common modules|http://uk.computers.toshiba-europe.com/innovation/download_driver_details.jsp?service=UK&selCategory =2&selFamily=2&selSeries=178&selProduct=784&selSho rtMod=null&language=13&selOS=10&selType=all&yearup load=&monthupload=&dayupload=&useDate=null&mode=al lMachines&search=&action=search&macId=&country=8&s electedLanguage=13&type=all&page=1&ID=63941&OSID=1 0&driverLanguage=42]
    Good luck and let me know if you get it solved using these recommendations

  • Where can I find FF 3.01? My users have 3.01 and my software is not running correctly on the latest FF versions.

    My Javascript/HTML code works fine on my Ubuntu box with FF 3.6 but the clients have to use FF 3.01 (compatibility problems with other software preclude them from upgrading to a new FF version) and the software is not working.
    Without having access to FF 3.01, I can't debug the software.
    I've been unable to find FF 3.01 for Ubuntu. Where can I find it?

    See [[Installing a previous version of Firefox]]
    If you are going to use Firefox 3.0, you should try the last version 3.0.19 rather than 3.0.1

  • Tecra M5: finger print sensor is not working properly since a drink was spilt into the keyboard

    My finger print sensor is not working properly since a drink was spilt into the keyboard. When booting up, it automatically "fails" 5 times in a row (without any attempts to swipe a finger), then defaults to password entry to boot the machine's hard drive.
    This is not a problem and all i want to do is disable the finger print sensor, but cannot work out how to do this. I've tried uninstalling the driver, which I seemed to do without any problems, but when rebooting, the sensor still seems active, and still goes through the same process.
    Everything else works fine and this is just a minor niggle, but I'd like to remove the annoyance of it beeping at me 5 times while it does its thing!
    Can anyone tell me how I completely disable it?
    Thank you.

    Have you removed the fingerprint software? If yes check if in device manager is listed some unknown device. Please post the result.
    Maybe you can try to disable this unknown device and it will not be recognized as new hardware every time when you start the notebook.

  • Hp probook 4540s .. Finger print sensor is not appearing in hp protect tools

    Hello ...<br>I've recently bought HP Probook 4540s and everything works fine except the finger print sensor<br><br>My labtop has windows 8 installed and all drivers and devices are workig fine but the finger print sensor is not appearing in the windows device manager or in the hp protect tools neither.. At the beginning i thought it's a hardware problem untill the operating system detected the finger print sensor while i'm logging on this happened just once and i dont know how to get the sensor work again <br>I've installed the latest validity finger print driver and hp protect tools and hp security manager everything from hp drivers site but nothing helps<br><br>What do you think i miss here ??

    Hello Eng_MG
    I see that you are having problems with the finger print reader on your HP computer.
    I would suggest posting this message in the HP Commercial Forum as well. There will be more users with the same computer and programs. The link will take you to the board specific for your computer.
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • How to use FInger Printer Sensor with HP Probook 440 G2

    I have HP ProBook 440 G2 I am unable to set finger print sensor as the login to my device.  

    You need to install the HP client security Manager in order to configure and use the Fingerprint reader. Link: Your PC's download page does not list the software but the below link may work.Make sure to backup your data before proceedinghttp://h20564.www2.hp.com/hpsc/swd/public/detail?swItemId=ob_141857_1#tab5Make sure to backup your data before proceeding

  • Hp finger print sensor

    Hp envy 15 j039tx notebook Pc
    I have recently refreshed OS i.e windows 8.1, now i am running windows 8.0
    The problem is that 
    1-Finger print sensor is not working, niether detecting the fingre, niether the led is blinking.
    2-The hp simple pass is not offereing to register the fingre prints.
    Troubleshooting steps performed:
    a- unistalled and downloaded and intalled simple pass and validity fingerprint driver.
    b-upgraded bios version.

    Hello @masefc11 ,
    Welcome to the HP Forums!
    I understand you're unable to use your fingerprint scanner after refreshing your notebook.
    Can you tell me which version of SimplePass you currently have installed? To do this you can click the Help icon and then click on About. The version should be listed below the HP SimplePass logo in the About window.
    Try going through both of these documents for help with fingerprint readers in Windows 8:
    Using HP SimplePass Fingerprint Reader (Windows 8)
    Troubleshooting a Fingerprint Reader (Windows 8)
    Let me know which version you have, and if either of those documents resolved the issue.
    Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
    Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
    The Great Deku Tree
    I work on behalf of HP.

  • Is it possible to turn off the finger print sensor?

    Right now I am not sure if I buy the new iphone 5s.
    The finger print sensor make me worry!
    Is it possible to switch it completely off?
    Maybe like SIRI - during installation you can say, I don't want to use it!
    Thanks for your help and sorry for my bad english!

    Thanks for your fast reply!
    Thats perfect! Now I can order the new iphone without my concerns!
    Thank you very much!
    Have a nice weekend!

  • Finger print sensor

    hi
    i have hp probook 4535s, Using windows 7 home premium (but i changed from original windows home basic...) the finger print sensor is not working and i can`t connect to  wireless internet. i have installed the driver but nothing.
    Can anyone provided me with a link to intall this driver or to fix my problem?
    Thanks

    Hello Kgothatso,
    Your ProBook is a Business model.  Your issue would be best answered on the HP Enterprise Business Community Forum
    Good luck!
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • Help for finger print sensor

    hello,
    in my hp dv4 1502tu, finger print sensor is not working after formating my system. i have searched a lot in internet,but i cant able to find out the software of the particular sensor.
    so please help me out to shortout this problem.

    Hi,
    The validity sensor driver for your fingerprint reader is on the following link.
    http://ftp.hp.com/pub/softpaq/sp45001-45500/sp45217.exe
    Digital Persona software can be downloaded from the link below.
    http://ftp.hp.com/pub/softpaq/sp48001-48500/sp48018.exe
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • I have Photoshop Elements 9 on an iMac with OS 10.6.8. I bought a new printer/scanner and the program will not import the new scanner to replace the old one. How do I do this?

    I have Photoshop Elements 9 on an iMac with OS 10.6.8. I bought a new printer/scanner and the program will not import the new scanner to replace the old one. How do I do this?

    Thank you for your suggestions. I downloaded a more recent version of Twain, but this didn't help. I also tried closing and opening Photo Shop and restarting my computer without success. Reinstalling Photo Shop sounds like a very promising solution, but I'm  not sure I will do it. In the meantime I can scan items using a printer program. These scans open in Photo Shop. It is an extra step.

Maybe you are looking for

  • How to send Mailing Spool Details of Background jobin EXCEL format

    Dear All, Hope every one doing awesome. As per client requirement we need to send spool detail to user in EXCEL format. http://sapignite.com/sending-mail-for-background-job/ As per the mentioned thread ABAPER created the code and we are getting mails

  • Crystal Report connecting Multple ECC systems

    Hi, I am working on crystal where I compare the data between to two diffrent databases(ECC tables). I am using SAP Table, function mudule option to create connection. I have built a main report against ECC system A and imported a sub report built on

  • Java.util.Logger in ADF page

    The following code work fine in a standalone application and I can view the logs in my LogToFile2.txt public static void main(String args[]) throws IOException { Logger logger=Logger.getLogger("LogToFile"); FileHandler logFile = new FileHandler("C:\\

  • Anybody on Bell's "Waiting List" for IPhone 5?

    The Morning of the 14th I was one of the first to "Reserve" two new 16GB IPhone 5's at Bell. Here we are at the 23rd, three days the phone has been available for ditribution and Bell does not have any?  Anybody else still waiting one one of these lis

  • NI-488.2 no instruments found

    Using PCI-GPIB card with NI-488.2 version 1.6 (or 1.7) and Windows NT 4.0: - If a GPIB instrument is at GPIB address 1 on PCI-GPIB configured as GPIB1, this instrument is not found using N.I. "Scan for instruments" utility. If I change this GPIB inst