Fire Wire to USB 2.0

Does anyone know of a device that will plug into my FW400 and convert/provide a USB 2.0 port?

There is no such thing. The data formats and rates are different enough to make a simple converter impossible.

Similar Messages

Fire wire or usb Connection for external disk dvd disk drive

is it worth the extra money buying a external dvd re-wrighter with fire wire connection rather than the traditional usb connection? would it work like a normal disk drive as my internal dvd/cd drive is broken.

Thanks SCB and malcom
Ive got a budget of around £100 to spend and have been looking at a lacie dvd+16x light scribe 4.7gb/8.5gb with fire wire. Any idea if there any good?
Pioneer any models i should be looking for?
thanks

Fire wire to usb to phone

Both of my usb ports don't work. Is there a way for me to use my firewire and buy multiple adapters so I am able to plug my phone into my computer.

I am not aware of any female USB to male Firewire Adapters.
Ciao.

Satellite P100: USB/Fire-Wire ports not charging external device

When I plug my ipod into either my 4 pin fire-wire port or a USB port on my laptop (satellite P100) it fails to charge, even when plugged in to the mains/ A/C power. I think I have found where I need to go in 'control panel' but need help on how to allow my fire-wire and USB ports to give out power and charge my ipod when its connected.
Any help on this matter will be greatly appreciated.
Cheers

Hi
The USB ports provide automatically the power. Usually every USB port provides about 500mA.
But please note; the notebook must run and the external USB device (iPod) must be recognized by Windows OS!
I dont know if the iPod was recognized by WinOS but I have read the many users have problems with the iPod installation on Windows OS. As far as I know the iTunes must be installed if you want to use the iPod.
Greetings

Is fire wire dead?

I have an older Mac - 1 fire wire port, 0 Thunderbolt. I'm looking to add a new external hard drive. I have found the LaCie Quadra drive. It has fire wire and USB 3.0 interface ports. I don't need to spend the big bucks for a new Mac. So, the LaCie seems to be the answer. If (it's only a matter of time) I buy a new Mac, I should be able to use the USB 3 connection. Any thoughts? Thanks

Hi there tadg47,
All new Macs in the store right now have USB 3 and Thunderbolt ports standard. If you do buy another iMac in the future, you should be able to use your USB 3 drive without any issues. You would also have the option of using Thunderbolt via a Thunderbolt to FireWire adapter, but the down side there is that you will be limited to FireWire speeds (400 or 800 Mbs) versus the 5 Gbs with USB 3. I would recommend reviewing the FAQ articles below for more information.
Thunderbolt ports and displays: Frequently asked questions (FAQ)
http://support.apple.com/kb/HT5219
Using USB 3 devices on Mac computers FAQ
http://support.apple.com/kb/ht5172
-Griff W.

5th gen 80g only charges with fire wire

Hi my 80 gig ipod did not work after not charging for a long time (it just said battery to low please wait then a blank screen) so i put a new battery in it came on all good but when i plugged it in my mac nothing happened (did not sync or charge) so i tried it in in a docking bay that charges but it did not charge but music came out of speakers so i reset it still nothing then i thought i try a different cable to mac (a old one a fire wire with usb as well) it worked with both connected so i restored it but it only works with both plugged in if i unplug the fire wire it still seen by my itunes by the usb and syncs but if i just plug the usb in nothing (on the same cable) until i plug the fire wire in and itunes opens

I don't have the internet at the moment (and won't do for a while) so upgrading isn't an option - and you don't get a disc with the iTUnes software with video ipods it seems, so I can't upgrade my software that way. I just want to use my new ipod as soon as possible and was expecting to just be able to plug it into my computer and download without any problems.

HT5299 I have a Gdrive mini and 2 LaCie hard drives that connect fine using USB. Thunderbolt to fire wire 800 adaptor will not connect to either my MAC air or LaCie drives. Help

I have a G drive mini and 2 LaCie hard drives that connect fine using USB. Thunderbolt to fire wire 800 adaptor will not connect to either my iMAC or Mac air or LaCie drives. Help

Have you tried any of these soundcards designed for 2.0?
The 3.0 port is categorically designed to be comoatible with all 2.0 devices. The port itself will adapt to the usage parameters of the device.
But if you really want to downgrade, then simply plug any 2.0 hub into a MBA 3.0 port. The ports on the hub will be 2.0.

Fire Wire 400 vs 800 vs USB speed

A Fire Wire 800 port has a faster rate of transfer than both the Fire Wire 400 and a USB 2.0. Is a Fire Wire 400 port faster than a USB port and if so is it considerably faster than the USB.

Hi mick1964;
USB 2.0 is the slowest. I know it has a quoted rate that is greater then FW400 but that it burst rate which it is not capable of sustaining.
Generally FW400 is about 40% quicker then USB 2.0 for sustain data transfers.
FW800 is faster then FW400.
Allan

External drive - USB or Fire wire or AC

Hello I dont know where to put this question so: Which would be the best for a 500GB external drive, USB & fire wire or AC? I want a portable external drive (2.5) but am not sure whether AC is best route or if USB/Fire wire?
Thank you
Veedeekay

Which would be the best for a 500GB external drive, USB & fire wire
Use FireWire, not USB.
I ALWAYS build my own drive (takes 5 mins). More storage and less money.
 I like the TD-M120 enclosure, it's the best I know of.
Has a cooling fan, shock absorbers, and all the ports you will ever need. 
   http://www.cooldrives.com/ox93saiihadr.html
http://www.onnto.com.tw/product.asp?sys_sysno=31
And this drive:  
http://www.amazon.com/Western-Digital-Intellipower-Desktop-WD20EADS/dp/B001RB1TI S/ref=sr11?ie=UTF8&s=electronics&qid=1258862242&sr=8-1

Fire wire target disk mode work with usb also?

hi all,
does starting up in fire wire target disk mode also work with usb drives?

No, and it requires a Mac with built-in FireWire.

How do you hook up a fire wire video camera to the 13 inch aluminum macbook

I have a 13 inch mac book with only USB, but a video camera that only has a fire wire output jack.
How can I hook up the camera with fire wire out to the USB in on the new 13 inch MB?
Is there an accessory I can buy that will do this? Link to the product?
Thanks!

There is no option/accessory to do this. You'll need to get a different camera, or use a computer with firewire.

IMac can't running any two fire wire hard disks at the same time . which

iMac can’t running any two fire wire hard disks at the same time . which two hard disks have extra power from power socket . If i just insert one of them .No problem . If connect two Hds at the same time. Leopard cant find it and the Hds seem no problem. the machine must be restarted and then use one . No problem . I have formated the HD many times .even if which format is Fat 32 or Mac issue persists .Boot from installation CD used the disk utility . Issue stills . If i used one fire wire HD that get power from power socket and used one fire wire device . Leopard was no problem during this time . Whether is this design problem or my machine hardware problem?My Mac has been changed the logic board by Apple service . Do you have similar case in here????
Message was edited by: KennyG1983

Hi KennyG1983-
How are you connecting these drives?
This may help: What to do if your computer won't recognize a FireWire or USB device
Luck-
-DaddyPaycheck

Install OS 10.2.1 on Fire Wire Drive

If I purchase a Fire Wire Drive and cable, connect to my Pismo, can I install OSX 10.2.4 from a Software Install and Restore disk and use this drive for OSX activity? How should it be set up? Where can I find instructions for such a task?
Mac PowerBook G3 (Pismo), 400MHz, 10GB HD, 320MB Ram, DVD Drive, 2 USB & FireWal Mac OS 9.0.x

Homer, welcome, yes you can, however, I would highly recommend using Carbon Copy Cloner to make a bootable backup of your OS on a separate partition on that external.
Joe
Power Mac G4 Gigabit Ethernet Mac OS X (10.3.9)

HP Pavilion Elite m9040n Desktop and Fire Wire 1394

I have the above mentioned Desktop. It has a 1394 plugin on the front of case. Does the Pavilion come with all the software to make fire wire work? I backed up my hard drive onto an Toshiba external disk with a USB cable the other day and it took 6 hours. Isn't fire wire suppost to transfer data faster than a USB cable? Is there any special things I need to know when buying fire wire 1394.
I was looking on the internet the other day and they showed fire wire with 4 and 6 pins. Looking into the hole on my computer it only looks like 3 pins?
Thanks
This question was solved.
View Solution.

Rick, welcome to the forum.
There is no software necessary for Firewire (IEEE 1394a). The driver is installed with the OS.
Here is the Motherboard Specifictions page for the computer. It only shows that there is a Firewire (IEEE 1394a) port (# 11) in the Back I/O ports.
Here is an article that shows the comparison of speed of Firewire vs USB. Firewire was developed by Apple.
I hope this information answers your questions.
Please click the "Thumbs Up+ button" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Fire Wire Error Message:

If anybody has been following my posts, I have been wanting and needing a fire wire enclosure for large hard drives. I only have one of each. A Fire Wire enclosure and a 3.5 PATA drive. A Maxtor 160gb. I have other hard drives and they are smaller, and have issues. Fortunately OS 9 is able to mount these damaged drives.
I am very happy to have a fire wire enclousre and also a new hard drive for my files. =] =] And I still have like a bunch of files to organize but the most important thing right now is to get all of these files off of three messed up hard drives.
I have one hard drive connected to a USB enclosure and the new 160gb one is connected to the Fire Wire enclosure. (It also has a USB 2.0 port but I am connecting it to Fire Wire) and I am running OS 9 while operating all the external hard drives.
As for the fire wire enclosure: I get an error message:
A FireWire disk has stopped responding. The problem must be corrected to prevent damaging the disk's contents.
Please check all FireWIre connections. If you added, removed, or turned on a FireWire device on or off, try undoing what you did.
And so I turn off the drive and turn it back on. It acts like nothing has happened to it. But certainly something bad is happening!!! =S
Also it has done this in the middle of transferring files and then I turn it off and on and then it resumes moving THE SAME file!!!!!!! =S
????????????????

Could the problem have been the USB-only enclosures??????? I have tried to get it to work a few minutes ago and it would not turn on. I gave up on it and I disconnected it. I am moving files from the damaged hard drives onto that imac's internal hard drive, and then onto the new hard drive ... all using the same fire wire enclosure. I have one so far and not two... and that is kinda frustrating. =S }=S }=S
Even though I have to keep switching hard drives with one fire wire enclosure, the fire wire enclosure transfer speed is now FAST!!!!!!!!
=]

Fire Wire to USB 2.0

Similar Messages

Maybe you are looking for