Firefighter Logs storage location and size in GRC AC 5.3

Hello Gurus,
We are working on Firefighter configuration and are totally confused with following questions, appreciate if someone can show the light here :
Where does the Firefighter logs stored - in backend or frontend or both? Can we check the size of existing Firefighter logs.
Is there any mechanism to find out the approximate space requirement for Firefighter usage (based on number of firefighter id and number of transactions executed per day).
Thanks
Davinder

D P,
The logs are stored in the backend SAP system. I have not seen any space requirement for FF. You can take a look at the sizing guide for AC 5.3 and you may find some useful information.
Regards,
Alpesh

Similar Messages

Stock on posting date -storage location and batch wise

Dear All
I need to developa report exactly same as MB5B but with storage location and batch wise.
We need storage location wise opening stock, total receipts, total issues and closing stock, and values for given time period.
I have gone through some history tables like MCHBH and MBEWH.
But all the history tables are having fileds for period wise but not date wise.
Any focus on this?

You have to read the coding of MB5B to see how SAP is doing it.
The stock per date is calculated, starting from a month end, adding or reducing quantities based on movements until the date in question is reached.

Location and size of hotspot in a packaged file

Hi all,
I'm working on a authorware program in which I want to use the location ans size of a clicked hotspot to draw a rectangle. Ultimately, I would like to be able to change the size/position of a hotspot, and when packaged, the rectangle should be drawn at the new position of the hotspot, with the new size. So far, I've been succesful in an unpackaged file with:
GetIconProperty(@Title; #awSizeX))
GetIconProperty(@Title; #awSizeY))
GetIconProperty(@Title; #awLocationX)
GetIconProperty(@Title; #awLocationY)
where Title is the title of the clicked hotspot. So far so good... BUT I learned the hard way that GetIconProperty() does not work in a packaged authorware file (next time I'll first read the help section better!). My question: how can I obtain the same information in a packaged authorware file?
I have been looking at the GetSpriteProperty() function, which should work in a packaged file. However, the hotspots are not sprites, and I don't know what spriteproperties I should use for the location and size of the hotspot (#awSizeX, #awSizeY, #awLocationY, & #awLocationX don't work). Furthermore, GetPostPoint does provide the position of the top left pixel position of the hotspot, but I need separate X and Y values for the position of the hotpot to be able to use the Box() function to draw the rectangle. And I need the of the hotspot as well. Lastly, PositionY@Title and PositionX@Title don't work for my hotspots (the value is always 0 and does not change when clicking the hotspots).
I could solve the problem by making variables of all the position values and size values of all the hotspots, but then I would not be able to change the position and size of the hotspot by dragging, and changing the rectangle accordingly.
I would be more than happy to hear if anyone has a solution for me.
Thanks!

Hi Steve,
Thanks for your suggestions! Regarding your first thought: I don't know what you mean by making my clickable area a hit *object. I've tried the help pages of authorware, but it drew a blank. Could you explain how I can make my clickable area a hit *object?
Regarding clickX/Y: the values depend on the exact location where the user clicks, therefore drawing a rectangle over a picture (which is not moving) is difficult using clickX/Y. I would like the rectangle to appear on a certain spot (namely on the position of the hotspot, with the same width & height), regardless where in the hotspot the user clicks.
Frank

Material/Serial Nbr is "Stuck" in a storage location and can not be moved

We have a situation created by my customers which has lead to a situation I have never seen before. A material/serial nbr. that is in our Returns location that can not be transfered, issued, removed, or anything via ANY MIGO movement type combination.
This is what happend:
- Customer return processed. Material ABC, Batch XYZ with Serial Nbr. 123 brought into our "RT" StoreLoc.
- Clerk processed MIGO to do a Stock Transfer of this material to another StoreLoc. (PS). He entered in the material ABC, batch XYZ, and a bad serial number 1233. He used a 453 Movement type.
- After realizing his mistake, he processed MIGO again and processed a GI Xfer posting with a 972 movement type to get rid of the bad material/serial nbr. he had just moved to the PS StoreLoc.
- Then he tried to redo the Stock Transfer using a 453 Movement type for the material ABC, batch XYZ, and the good serial nbr. 123, but, he gets a "Deficit of BA Ret.blocked prev. 1.000 EA " error message.
- At this point, he contacts me to ask what can be done.
No matter what we try to do, we can not access this part/serial nbr. combo to move it or issue it or whatever. It is like a ghost now. You can see the serial number via IQ03, but you can not do anything with this part/serial nbr.
Help! Do I need to write an ABAP to physically delete this material/serial nbr from its batch?

Hi,
First of all, I would assume you used customized movement type 972 to 'get rid of' your material ID with wrong serial number 1233 at PS storage location. If this is the case, then this posting did not return the stock quantity from PS to your RT storage location and that why when you tried to make another posting (with correct serial number 123), an error message was popped up as you simply do not have available stock. The solution in this case are -
1)   Cancel the posting that you made previously with movement type 972. This cancellation will help return your stock (though with wrong serial number 1233) to PS storage location;
2)   Cancel the posting that you have posted to move your stock back from PS to RT (again with wrong serial number). This steps ensure the stock quantity '1' is available at RT storage location;
3)   Make another stock transfer (with correct movement type 453 and serial number 123) from RT;
4)   Delete the serial master record 1233 so that it can no longer be used.
Cheers,
HT

Why can not freeze book inventory Storage location and Posting block?

Hello,
I tried to freeze book inventory storage location and posting block at storage location level in SAP.
1) OMBP -> "Freeze book inventory storage' is checked at that storage location.
2) MI01 -> the 'Posting Block' and 'Freeze book inventory' in the Physical Inventory Document is checked.
3) Post the Physical Inventory Document by using MI02.
But, I am still able to post inventory movement at that storage location after executing the above.
(I run MB1C with movement type 501 at that location.
I input the material number which are in the created Physical Inventory document.
The posted manterial document is created after I run MB1C.
The document date and the posting date in MB1C are the same date of Physical Inventoery Document.
I can see this material inventory movement from MB51!! )
My question is: Why SAP is allowed to execute the inventory movement after the 'freeze book inventory storage location' and 'Posting block' are checked at OMBP and MI01 ?
Any idea?
Help me, thank you.
Regards,
Sylvia Chen

Problem solved. Thank you for all help!!

Storage location and post.chge storage location not in the same warehouse

Hi All,
We have HU managed Storage Location, and in this Storage Location we have SUT managed Warehouse, Now while Goods Receipt we have to create inbound delivery, which is working fine and i can see my stock in Goods receipt area,, later on whicle creating Transfer Order to putaway in a bin i have a error message "Storage location and post.chge storage location not in the same warehouse" please help me with this error message. Thank you for all your inputs.
Regards
Samuel

Hi Nagesh,
Thank you for the input. I am receiving Stock from vendor and while creating Inbound delivery i created the Handling Unit and also packed it and i could also post it (PG Receipt). Now when i am creating TO i have that error message. The Storage Location where i am receiving is 9001and i have also maintained the partner Storage location,,, its like this Plant(1000)-SLoc(9001)-Partner SLoc(9002).... now the Storage Location 9002 is not HU managed,, the reason i gave this Storage location is, initially i gave 9001, but system said "Storage Location 9001 and 9001 must have different management systems". So now kindly tell me what is the purpose of the partner Storage location and which storage location should i give, as my partner Storage location across "1000-9001-????" thank you again for ur inputs.
Regards,
Samuel

Link between storage location and batch number to retrive the salk3 field

HI,
In my report i need to give the output as follows
For each lgort with related batch number we need to get the salk3.So i need to get a link between lgort , batch number to retrive the salk3.can any one give the tables from which i can get the link and retrive the data.
note: My report output should look like the fields lgort batch and unrestriced value of stock in tcode mb52.
subhashini.
Edited by: subhashinikb on Apr 1, 2011 9:38 PM

Hi,
In 2 steps, u can get the unrestricted stock value.
step1: Get material no (MATNR), plant (WERKS), batch (CHARG) and unrestricted stock (CLABS) from table MCHB by sending Storage location and batch number.
Step2: Get standard price STPRS from table MBEW based on condition where MATNR = MCHB-MATNR, BWKEY = MCHB-WERKS and BWTAR = MCHB-CHARG.
unrestricted value in MB52 will be (MCHB-STPRS) * (MCHB-CLABS).

Stock transport order between storage locations and assignment category type E not in MRP

Hello Gurus,
I have a stock transport order between 2 storage location which belongs to the same plant. Besides the stock transport order is allocated to a sales order (account assigment category E). When I run the MD03, the system take into account the quantity of the stock transport order as a future entry and this is wrong. I need that the MRP has not into account the stock transport order as an entry.
As an important information, If I modify the stock transport order removing the account asignment category E (sales order), then the MRP doesn't take into account it, so this is correct.
Could anybody tell me how to get it?
Thanks in advanced.

Laura,
It is normal that MRP will consider an STO as a receipt element; this is basic planning. It is unclear to me why you think you do not want it to do so, but I will assume you have some logical reason.
Contrary to what some others may have suggested, changing the scope of check for availability checking has no effect on which elements are considered for MRP. MRP is a completely separate functionality from Availability Check.
For Location > Location STOs (within a plant), then, you normally have the receipt element of the STO in the destination storage location, and the requirements element of an equal amount in the source storage location. Net of these two elements is zero, unless you have already issued the STO at the source location.
Changing the Account assignment from "E" means that the STO will not be relevant for your Sales order (in other words, when you receive this STO into the destination storage location, it cannot be used for your sales order). In a general MTO scenario, it also means that the proceeds of this STO (the stock you received) cannot be used for ANY sales orders.
One way that some people make an STO 'not relevant' for MRP is to alter the destination storage location such that it is not relevant for MRP. You can change the MRP relevancy of the storage location in MM02 > MRP4 tab
Best Regards,
DB49

How to get Storage Location and Vendor details in MD03 automatically

Hi folks,
We want to create automatic PR and PO from Planned Order.
But when PR gets created in MD03, the values for Purchase organization, Storage Location and fixed vendor are blank, even after maintaining source list with fixed vendor .
How to populate these values automatically ?
I am also attaching screenshot of MD03 screen

Hello
If you are creating the orders using MRP, you should make sure that the field MRP is set to 1 on the source list. The field 'fixed vendor' is not relevant to MRP. When the vendor is selected from the source list, the purchasing organization should be also copied to the purchase requisition.
The storage location will be copied from the respective field on the material master tab MRP2.
Also take a look on the following document:
MRP: Vendor is not selected and general problems on source determination
BR
Caetano

BATCH SPLIT AUTOMATIC STORAGE LOCATION AND WEIGHT DETERMINATION IN DELIVERY

DEAR,
PLZ SUGGEST ME HOW TO DO CONFIGURATION IN BATCH DETERMINATION SUCH THAT WHILE DOING BATCH SPLIT WHEN I PUT THE BATCHES MANUALLY THE STORAGE LOCATION AND ITS SPECIFIC WEIGHT WILL COME AUTOMATICALLY .
REGARDS,
DEBESH TRIPATHY

Hi ,
You have to use the user exit as mentioned by lakshmipathi above and take the help of ababer to modify it.
V02V0002 - User exit for storage location determination
Also go through this link for user exit for delivery
http://www.sap-img.com/abap/list-of-user-exit-related-to-vl01n.htm
Regards,
Krishna O

Change storage location and plant for Return Delivery (outbound)

Hi,
I'm trying to achieve the following:
Sales orders contained the 'normal' plant. Whenever a return delivery is created it should default the plant to a 'return delivery plant / storage location'. I've looked in to this and it seems we've got multiple options, however i would like to check:
- Implement V02V0002 user-exit and link with 'return' movement type. Will this ensure plant change aswell?
- Use standard RETA rule and define ?situations?. Could somebody clearify whether we can achieve our goal with this: Change plant and storage location?
Any suggestions to achieve the above are very much appreciated.
Note: Material contains both views for 'return plant/storage location' and 'normal plant/storage location'.
System is R/3 4.6c with IS Retail activated.
Kind regards,
Tim

Hi,
The delivery is created against/follow-on a sales order / subscription order / invoice. I don't think we use/have a 'return sales order'. Yes, we only use 1 plant / storage location for the returns of goods.
To sum it up:
- Implement badi/user-exit ensuring that the plant is changed/defaulted in to our 'returns plant' for return documents.
- Configure storage location via 'shipping condition'.
Correct?
Ps. I don't think we'll achieve changing the plant via configuring a shipping condition for our return document type. As the plant from the sales order doesn't match with the shipping condition it won't be taken in to account? And yes: It is mandatory/requirement to change the plant for customer return documents.
Thank you for your inputs.
Kind regards,
Tim

RE: Difference between Storage location and warehouse

Hi All,
What is the difference between storage location and warehouse?

Hi,
First of all Storage Lcoation is part of Inventory Management.
Warehouse is part of Logistics Execution.
Storage location is part of SAPu2019s enterprise structure that holds the stock quantity
Option: To maintain a single storage bin for every material in every storage location
To simplify: To utilize a storage location as the u201Cstorage facilityu201D means that the materialu2019s actual bin location is not important, or that the material is located in a single bin throughout the storage.
Warehouse is part of SAPu2019s enterprise structure that holds the stock bin location
To simplify: When a warehouse (Warehouse Management) is utilized as a storage facility, a materialu2019s actual bin location is of great importance
Advantage: Track a materialu2019s changing bin location
Warehouse Management has greater applications for use in a storage facility
Disadvantage: More complexity and usually requires more data entry
Hope this helps.

Stock transfer between storage locations and lead time

Hello,
We use stock transfer orders between different storage locations. Is it possible to maintain the transport lead time between storage locations somewhere or do in need to use routes and scheduling?
rgsd
GAR

Hi,
Try using movement type 313 and 315
313 -- Transfer posting SL to SL --- Remove from issuing SL
315 -- Transfer posting SL to SL -- Placing in Receiving SL
Regards

Storage location and Batch updation for components in Production Order.

Hi Friends,
After creating Production Order,need to update components with Storage Location(RESBD-LGORT) and Batch(RESBD-CHARG).
Plese any one can help me by providing FM/BAPI for the same(Update Component level)
Points will be rewarded.
Thanks,
Prb.

Hi Prathap,
Path - OCHA
Condition type,access sequence, strategy type,
Work on automatic batch determination. Assign standard search procedure to order type dependent parameter, check against manual entry.
Make sort sequence for material by CU 70, tick ascending order, Then assign component in COB1, enter selection values and sort sequence. In finish product material master set automatic batch determination.
System will copy the required material with batch & storage location, also check against manual entry.
I think it will solve your problem.
Regards,
Suhas

Crash log storage location for EXEs

Hi,
I know that when a VI crashes with a LabVIEW internal error in the Windows development environment, a log file is generated and stored in LabVIEW Data\lvfailurelog.
I had an internal error crash recently in an EXE running under LabVIEW Run-Time without the development environment installed on the computer, and I am having trouble finding the location of the log file. I tried a search for .lvlog, and found nothing. Has anyone seen a log file from an internal error crash under LabVIEW Run-Time? If so, where was it?
Thanks!

http://digital.ni.com/public.nsf/allkb/2FF01AD2F6A02ABD862578D40053FCC7
You'll see number 4 is all about error reporting in built applications. It seems the application should produce a log, assuming the crash is caught. It should save a log (if one was created) in the user's LabVIEW Data directory which by default is here C:\Documents and Settings\<user>\My Documents\LabVIEW Data.
This directory location can be changed manually, but most users keep this location. If the folder does not exist here and you can't find a log folder with a search, it's likely the failure was unable to be caught or logged.
I know from experience that crashes in the development environment can occur without a log. It seems likely that failures in the runtime environment can fail in a similar fashion.
James

Firefighter Logs storage location and size in GRC AC 5.3

Similar Messages

Maybe you are looking for