FireFox 3.6.15 will not start it is NOT compatable with Avast 6.0.1000 sandbox, it gives the following error when I try to open in sandbox: XULRunner Error: Platform version '1.9.2.15' is not compatible with minVersion =1.9.2.14 maxVersion = 1.9.2.14
Before FireFox was updated to ver 3.6.15, FF would open in Avast sandbox with no issue. Since the update to FF I can only open FF outside of Avast sandbox. Avast version 6.0.1000
I turned off all Add-ons and still No Joy!
Windows 7 Pro 64 bit; I7-950 CPU, fresh reboot does not fix this issue.
Just populated : Troubleshooting Information
I had already tried a reinstall before, but thanks for the suggestion. Starting FF in Safe mode did not help either.
XULRunner is specific to FF. Mostly found discussion about using the code in web pages when I used Google before posting.
When FF went from version 3.6.14 to version 3.6.15 this issue started. Please note the Error message and the version info I just mentioned.
'''"Platform version '1.9.2.15' is not compatible with minVersion > =1.9.2.14 maxVersion < = 1.9.2.14"'''
'''The Platform was revved up from 1.9.2.14 to1.9.2.15'''
I could not find information on: minVersion or maxVersion much less how to change them in XULRunner.
'''''It is definitely a Mozilla FF issue'''''.
Avast sandbox is up to date and works just fine with everything else. More importantly it worked just before the update was installed.
The only reason I bothered with the update is because Mozilla touted it as a security issue and there was NO mention of any known issues with sandbox software.
Similar Messages
-
i get the following message when i try to open any of my documents : frozen panes and split panes are not supported and were removed. All my documents open blanc!
Hi Louisa,
louisa_16_za wrote:
i work with Numbers on my MiniMac and then save the files as Excel because the university only works with Windows.
Numbers is not an Excel clone. Importing and exporting between Numbers and Excel will eventually build up glitches.
If the university only works with 'Windoze' it might be better if you use Excel or a free version of Office (for example, Libre Office or Open Office).
If your marks depend upon a professor who uses Excel, go with the flow.
http://www.howtogeek.com/187663/openoffice-vs.-libreoffice-whats-the-difference- and-which-should-you-use/
Regards,
Ian -
as above
This issue can be caused by an extension that isn't working properly.
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes -
I just want to download Firefox 3.6 again
I downloaded Firefox 4 onto my PowerPC G4, 1.67GHz running Mac OSX 10.5.6. When I try to open it I get error message You cannot open the application “Firefox” because it is not supported on this architecture.Use Tony's suggestion. I am running it right now and it is awesome. I love Mozilla but they basically screwed all of those older Macs over. Come on Mozilla. These Macs still work, and there are plenty of people with them out there.
-
I have Microsoft Word for Mac 2011, version 14.3.1. When I try to open a document, an error occurs, says file type is "blocked from opening in this version." This was NOT immediately after a version update. Any ideas? Thank you.
Take a look here:
http://support.microsoft.com/kb/953266
If that doesn't help, I'd suggest you take up the question in Microsoft's own forums or with Microsoft support.
Regards. -
AFTER DOWNLOADING THE LATEST VERSION OF ITUNES, I CAM GETTING AN ERROR WHEN I TRY TO OPEN IT. MSVCR80.DLL WAS NOT FOUND. UNABLE TO LOCATE COMPONENT. BEFORE I REMOVE THIS VERSION AND TRY TO RELOAD AGAIN, JUST WANTED TO BE SURE I WOULDN'T LOSE ALL 200 PURCHASED SONGS ON MY PC.
Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99220) -
problem updating to iphoto 9.6 after upgrading to Yoesmite I am getting the following message when I try top date iPhoto This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or canc
"This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled." ?
This error message will appear erraneously, if you skipped the update to Mavericks and iPhoto 9.5.1 and went straight from an earlier MacOS X version to Yosemite, without first updating to iPhoto 9.5.1 and associating iPhoto to your AppleID.
Try first to buy iPhoto with your AppleID instead of updating. Delete iPhoto from Applications, but don't empty the Trash, then go to the main page of the App Store and search for iPhoto. If you are lucky, it will show as free and you can buy it directly.
If iPhoto is not showing as free, there is no help but contacting the App Store Support: Ask for a redemption code. You will need to provide a prove of purchase for your mac with iPhoto preinstalled.
http://www.apple.com/support/mac/app-store/contact/ -
When i try to open iTunes I get error message "MSVCR80.dll was not found"
When I try to open iTunes I get error message "MSVCR80.dll was not found"
Hey Manyangels!
Here is an article that will help you troubleshoot this issue with your iTunes:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Thanks for coming to the Apple Support Communities!
Regards,
Braden -
why do i get the following message when i attempt to open my backup file for lightroom cc? "Lightroom cannot use the catalog named "Lightroom Catalog" because it is not writable and cannot be opened". This message just started coming up after downloading lightroom cc (previously using lightroom 5)...am i backing up properly or not???
Open Pictures folder and move the files named lrcat-journal and lrcat.lock to Desktop.
Make sure that , they are not inside Pictures folder any more and try to open backup from Lighrtroom and check..
Any LRcat file with .lock extension , move it to Desktop. -
"could not complete the requested operation" when i try to open the program
"could not complete the requested operation" when i try to open the program
what can i do
illustrator ccaccupub,
The following is a general list of things you may try when the issue is not in a specific file (you may have tried/done some of them already); 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
1) Close down Illy and open again;
2) Restart the computer (you may do that up to 3 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html -
why do I receive the following message when I try to sync my itouch, "this ipod cannot be used because apple mobile device is not started?
See Here
AMDS for Windows
http://support.apple.com/kb/TS1567 -
Trying to install iTunes for Windows Vista. Says "successfully installed," but when I try to open iTunes, I get error messages, "unable to locate componant AVFoundationCF.dll not found," then "Error 7 Windows error 126." I have tryed to reinstall twice with the same result.
Repair Apple Application Support.
START/CONTROL PANEL/PROGRAMS N FEATURES/highlight APPLE APPLICATION SUPPORT, then click the REPAIR button -
When I try to start Firefox, I get the error message "Your computer must be restarted to complete a previous upgrade of Firefox. Do you want to reboot now?" I have rebooted several times to no avail. Get the same message when I try to uninstall Firefox
Just had this same problem. Based on other suggestions I found on the web, went to C:\Program Files\Mozilla Firefox and deleted all files that ended with upgrade and/or delete. Then I was able to uninstall Firefox and then reinstalled. Hope this helps!
-
I am a web designer. I have saved pages that I update and upload to websites all the time. Now, after the latest updates, when I try to open these saved pages it only opens Firefox and loads the homepage. The saved page does not open. If I'm to keep using Firefox, which I would prefer, I need this functionality back.
''jscher2000 [[#answer-670981|said]]''
<blockquote>
What do you have set up as the default application for .html files? Or are you opening another kind of file that isn't normally/automatically associated with Firefox?
If you drag and drop the file onto a tab (which normally would replace the page there with the local file), what happens?
</blockquote>
I had tried all the suggestions. None of they helped. I can open the files by browsing for they after Firefox is open. I was able to spend some more time troubleshooting the issue yesterday afternoon. The issue has to do with the 64-bit file system. When I right click and select open with and then point it to the installation folder in the Program Files (x86) folder, it still won't open the file just opens to my home page. I did notice that when I was browsing for Firefox.exe that it defaulted to the Program Files folder not the Program Files (x86) folder. So I renamed the exe to LittleFox.exe and browsed for that exe and Firefox would then open the files as expected. So my guess is that it is a registry setting that is all the headache. I don't have time to run that problem down but will just use my workaround by renaming a copy of the exe and use that with my file association.
Thanks -
I am getting an Error when I try to open Firefox that Says Firefox is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system. This has happened several times recently. I deinstalld and reinstalled but am still getting the error. Any thoughts?
This happens to me as well. However, I have a shortcut on my desktop as well as my quick start bar. When this has happened to me, I can usually log back in without restarting, by using the shortcut on the desktop rather than the usual quick start bar.
I know this sounds weird, but it has worked for me about 80% of the time.
Maybe you are looking for
-
My iPad 2 won't power up and will not recover in iTunes
My iPad 2 will only power up to the Apple screen and then after around 60 seconds of being on that screen it switches itself off and starts again. I have tried to recover the iPad through iTunes by pluging the cable into the laptop, pressing and hold
-
13" Cannot set screen resolution in Windows 7 to 1440 by 900
Just finished installing BootCamp with Windows 7 Pro. For some reason the screen resolution in Windows display driver only goes up to 1200 not 1440 x 900. On MacOS it is obviously working fine. Any ideas?
-
Trying to sync my iPad and get the message that "all existing apps and their data will be replaced"
Previously my Windows 7 laptop didn't recognise my iPad but I persevered and now am getting the message when trying to update the iOS that if I sync, "all existing apps and their data will be replaced" so I'll lose everything I've bought since I last
-
Direct2D is still labled as false in about:support.
I am using Firefox 4 Beta 5 and I though that Direct2D was supposed to be enabled but I'm still seeing false in about:support. And there has been no change in rendering time.
-
Imac v10.6 has no right click feature
Can anyone help. I use to have a right click feature on the magic mouse that comes with a new iMac. it use to work till I updated my software to v10.6. Holding down the "control" key allows me to access the right click function but I like using the m